• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 412 : 2016 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
Available format(s)

Hardcopy , PDF

Superseded date

02-07-2021

Language(s)

English

Published date

19-03-2021

1.1These test methods cover procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers. These methods are not applicable to ebonite and similar hard, low elongation materials. The methods appear as follows:

Test Method A—Dumbbell and Straight Section Specimens

Test Method B—Cut Ring Specimens

Note 1:These two different methods do not produce identical results.

1.2The values stated in either SI or non-SI units shall be regarded separately as normative for this standard. The values in each system may not be exact equivalents; therefore each system must be used independently, without combining values.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 11
DocumentType
Test Method
Pages
14
ProductNote
ε1NOTE—Corrected2.2editorially in March 2021.
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 429 : 2014 : EDT 1 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
ASTM D 5893/D5893M : 2016 : R2021 Standard Specification for Cold-Applied, Single-Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM C 425 : 2021 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
ASTM A 975 : 2021 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM C 509 : 2006 : R2021 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material
ASTM F 913 : 2002 : R2021 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM D 5747/D5747M : 2021 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM F 3510 : 2021 Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products
ASTM D 120 : 2021 Standard Specification for Rubber Insulating Gloves
ASTM D 3186 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
ASTM D 3032 : 2021 Standard Test Methods for Hookup Wire Insulation
ASTM D 3772 : 2015 Standard Specification for Industrial Rubber Finger Cots
ASTM D 7160 : 2016 Standard Practice for Determination of Expiration Dating for Medical Gloves
ASTM D 1050 : 2005 : R2017 Standard Specification for Rubber Insulating Line Hose
ASTM D 178 : 2019 Standard Specification for Rubber Insulating Matting
ASTM D 1048 : 2020 Standard Specification for Rubber Insulating Blankets
ASTM C 1208/C1208M : 2018 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
ASTM F 146 : 2012 : R2019 : EDT 1 Standard Test Methods for Fluid Resistance of Gasket Materials
ASTM C 505 : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C 957/C957M : 2017 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM F 2870 : 2019 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM F 2150 : 2019 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
ASTM E 2785 : 2014 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
ASTM D 3903 : 2015 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM G 114 : 2014 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
ASTM F 2493 : 2020 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM D 3185 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM D 3189 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
ASTM F 477 : 2014 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM C 1115 : 2017 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 6909 : 2010 : R2016 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
ASTM D 2527 : 1983 : R2017 Standard Specification for Rubber Seals—Splice Strength
ASTM D 3771 : 2015 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D 3468/D3468M : 1999 : R2020 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
ASTM E 670 : 2009 : R2020 Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D 1869 : 2015 Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
ASTM D 3190 : 2006 : R2016 Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
ASTM D 3403 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
ASTM D 4054 : 2020 : REV C Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 6693/D6693M : 2020 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D 4811/D4811M : 2016 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM D 6746 : 2015 : R2020 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM F 1828 : 2017 Standard Specification for Ureteral Stents
ASTM C 509 : 2006 : R2015 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material
ASTM F 2118 : 2014 : R2020 Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
ASTM F 1703 : 2013 Standard Guide for Skating and Ice Hockey Playing Facilities (Withdrawn 2022)
ASTM E 1783/E1783M : 1996 : R2017 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 5926 : 2015 : R2020 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM F 2872 : 2019 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM D 2628 : 1991 : R2016 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM F 1837M : 1997 : R2018 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM D 7198 : 2005 : R2018 Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM D 5662 : 2019 : REV A Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
ASTM D 572 : 2004 : R2019 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
ASTM F 2051 : 2000 : R2014 Standard Specification for Implantable Saline Filled Breast Prosthesis
ASTM C 864 : 2005 : R2019 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
ASTM D 6976 : 2013 : R2018 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
ASTM F 1859 : 2014 : EDT 1 Standard Specification for Rubber Sheet Floor Covering Without Backing
ASTM C 564 : 2020 : REV A Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
ASTM D 6947/D6947M : 2016 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4325 : 2020 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D 6319 : 2019 Standard Specification for Nitrile Examination Gloves for Medical Application
ASTM C 1187 : 2020 : REV A Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM D 6152/D6152M : 2012 : R2018 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
ASTM D 7329 : 2007 : R2018 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
ASTM C 1619 : 2020 Standard Specification for Elastomeric Seals for Joining Concrete Structures
ASTM D 3188 : 2006 : R2017 Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
ASTM F 2320 : 2018 Standard Specification for Rubber Insulating Sheeting
ASTM D 8363 : 2020 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM F 1781 : 2015 Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
ASTM D 1049 : 1998 : R2017 Standard Specification for Rubber Insulating Covers
ASTM D 5893/D5893M : 2016 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM F 1860 : 2014 : EDT 1 Standard Specification for Rubber Sheet Floor Covering With Backing
ASTM E 1844 : 2008 : R2020 Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire
ASTM F 703 : 2018 Standard Specification for Implantable Breast Prostheses
ASTM D 3484 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
ASTM D 3105 : 2017 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM D 4014 : 2003 : R2018 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D 3192 : 2009 : R2019 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D 3848 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 3191 : 2010 : R2020 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
ASTM F 152 : 1995 : R2017 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM D 3184 : 2011 : R2018 Standard Practice for Rubber—Evaluation of NR (Natural Rubber)
ASTM C 877M : 2021 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
ASTM D 3568 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM D 5964 : 2016 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
ASTM D 4289 : 2019 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 6546 : 2015 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ASTM F 624 : 2009 : R2015 : EDT 1 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
ASTM D 69 : 2019 Standard Test Methods for Friction Tapes
ASTM D 3574 : 2017 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM E 3104 : 2017 Standard Specification for Strippable & Removable Coatings to Mitigate Spread of Radioactive Contamination
ASTM D 1414 : 2015 Standard Test Methods for Rubber O-Rings
ASTM F 2871 : 2016 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM D 6515 : 2000 : R2016 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM F 561 : 2019 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM D 2903 : 2021 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM D 3667 : 2016 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 4068 : 2017 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
ASTM D 1056 : 2020 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM F 790 : 2018 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM D 3832 : 1979 : R2017 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM D 120 : 2014 : REV A Standard Specification for Rubber Insulating Gloves
ASTM D 4000 : 2020 Standard Classification System for Specifying Plastic Materials
ASTM D 7465/D7465M : 2015 : R2019 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 5817 : 2020 Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
ASTM F 2042 : 2018 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM C 1173 : 2018 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
ASTM E 501 : 2008 : R2020 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM F 623 : 2019 Standard Performance Specification for Foley Catheter
ASTM D 4637/D4637M : 2015 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
ASTM F 1923 : 1998 : R2014 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
ASTM D 6338 : 2017 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM C 505M : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM F 881 : 1994 : R2014 Standard Specification for Silicone Elastomer Facial Implants
ASTM D 3577 : 2019 Standard Specification for Rubber Surgical Gloves
ASTM D 4551 : 2017 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
ASTM D 6324 : 2011 : R2017 Standard Specification for Male Condoms Made from Polyurethane
ASTM D 1330 : 2004 : R2015 : EDT 1 Standard Specification for Rubber Sheet Gaskets
ASTM F 1441 : 2003 : R2014 Standard Specification for Soft-Tissue Expander Devices
ASTM C 1193 : 2016 Standard Guide for Use of Joint Sealants
ASTM F 913 : 2002 : R2014 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM C 425 : 2004 : R2018 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
ASTM D 4819 : 2013 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM C 542 : 2005 : R2017 Standard Specification for Lock-Strip Gaskets
ASTM C 1277 : 2020 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM E 1136 : 2019 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM D 3851 : 2017 Standard Specification for Microcellular Polyurethane Shoe Soling Materials
ASTM D 5973 : 1997 : R2017 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
ASTM D 3187 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D 6924 : 2003 : R2017 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
ASTM C 877 : 2021 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
ASTM D 378 : 2010 : R2016 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
ASTM D 454 : 2004 : R2019 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM F 942 : 2018 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
ASTM D 3578 : 2019 Standard Specification for Rubber Examination Gloves
ASTM E 524 : 2008 : R2020 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM D 3579 : 1977 : R2016 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
ASTM D 876 : 2021 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D 4679 : 2002 : R2015 : EDT 1 Standard Specification for Rubber General Purpose, Household or Beautician Gloves
ASTM D 624 : 2000 : R2020 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 4316 : 1995 : R2016 Standard Specification for Elastomeric Water Bottles
ASTM D 7826 : 2020 : REV A Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D 470 : 2021 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D 3489 : 2017 Standard Test Methods for Microcellular Urethane Materials
ASTM D 4122 : 2017 : EDT 1 Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
ASTM D 865 : 2011 : R2018 Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
ASTM F 1551 : 2009 : R2017 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM F 1742 : 2003 : R2020 Standard Specification for PVC Insulating Sheeting
ASTM D 2671 : 2021 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
ASTM D 7161 : 2016 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
ASTM E 1612/E1612M : 1994 : R2017 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM F 1546 : 1996 : R2018 Standard Specification for Fire Hose Nozzles
ASTM D 3542 : 2008(R2019) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
ASTM D 3137 : 1981 : R2018 Standard Test Method for Rubber Property—Hydrolytic Stability
ASTM D 3958 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
ASTM D 7103 : 2019 Standard Guide for Assessment of Medical Gloves
ASTM C 1644 : 2006 : R2017 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM D 2523/D2523M : 2013 : R2019 : EDT 1 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
ASTM D 8138 : 2018 Standard Specification for Preformed Silicone Joint Sealing System for Bridges
ASTM D 1051 : 2019 Standard Specification for Rubber Insulating Sleeves
ASTM D 5250 : 2019 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
ASTM D 5747/D5747M : 2020 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM E 1551 : 2016 : R2020 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
ASTM A 975 : 2020 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM F 1081 : 2009 : R2015 Standard Specification for Competition Wrestling Mats
ASTM D 380 : 1994 : R2020 Standard Test Methods for Rubber Hose
ASTM D 573 : 2004 : R2019 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 3575 : 2020 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
ASTM D 6977 : 2019 Standard Specification for Polychloroprene Examination Gloves for Medical Application
ASTM D 6343 : 2014 : R2018 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ASTM D 7216 : 2020 : REV A Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM D 2000 : 2018 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 430 : 2006 : R2018 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
ASTM D 3492 : 2016 Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM C 1440 : 2017 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM F 2468 : 2005 : R2019 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 6411/D6411M : 1999 : R2020 Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
ASTM D 1566 : 2020 Standard Terminology Relating to Rubber

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.