• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1566 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology Relating to Rubber
Available format(s)

Hardcopy , PDF

Superseded date

24-11-2020

Language(s)

English

Published date

12-07-2019

This terminology covers definitions of technical terms used in the rubber industry.

1.1This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included.

1.2Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term.

1.3Users of this terminology who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to Guide D5992 and other standards listed under referenced documents. Selected terms from Guide D5992 may be found in Annex A1.

1.4Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 11
DocumentType
Reference Material
Pages
17
ProductNote
THIS STANDARD ALSO REFERS TO ISO 1382-82
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 8015 : 2015 Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
ASTM D 8059 : 2016 Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
ASTM D 6244 : 2006 : R2018 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D 3903 : 2015 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM E 631 : 2015 Standard Terminology of Building Constructions
ASTM D 5289 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM F 2038 : 2018 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials
ASTM F 477 : 2014 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM C 1115 : 2017 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 3771 : 2015 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM C 1523 : 2017 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C 717 : 2019 Standard Terminology of Building Seals and Sealants
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM D 3667 : 2016 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 832 : 2007 : R2018 Standard Practice for Rubber Conditioning For Low Temperature Testing
ASTM D 3832 : 1979 : R2017 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM F 2510/F2510M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
ASTM F 1861 : 2016 Standard Specification for Resilient Wall Base
ASTM D 4776/D4776M : 2018 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM F 3041 : 2014 : R2019 Standard Specification for Bonded Rubber Crumb Floor Coverings
ASTM D 3393 : 1991 : R2014 Standard Specification for Coated Fabrics—Waterproofness
ASTM A 1107/A1107M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
ASTM C 1478M : 2019 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) (Withdrawn 2020)
ASTM F 1860 : 2014 : EDT 1 Standard Specification for Rubber Sheet Floor Covering With Backing
ASTM D 7216 : 2019 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM F 1344 : 2015 Standard Specification for Rubber Floor Tile
ASTM F 2468 : 2005 : R2019 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 6085 : 1997 : R2016 Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts
ASTM D 2229 : 2010 : R2014 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023)
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 6270 : 2017 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM F 2169 : 2015 : EDT 1 Standard Specification for Resilient Stair Treads
ASTM D 1871 : 2004 : R2014 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
ASTM D 5603 : 2019 : REV A Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber
ASTM F 2523 : 2013 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
ASTM D 7999 : 2015 Standard Classification for Rubber Products in Natural Gas Pipeline Applications
ASTM C 1518 : 2016 Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM E 1749 : 2018 Standard Terminology Relating to Rigid Wall Relocatable Shelters
ASTM F 2042 : 2018 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM D 6338 : 2017 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM D 3853 : 2012 : R2017 Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
ASTM F 2946 : 2012 : R2017 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM F 1494 : 2014 Standard Terminology Relating to Protective Clothing
ASTM F 913 : 2002 : R2014 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM C 1619 : 2019 Standard Specification for Elastomeric Seals for Joining Concrete Structures
ASTM C 1478 : 2019 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
ASTM C 1644 : 2006 : R2017 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM D 883 : 2019 : REV B Standard Terminology Relating to Plastics
ASTM D 5538 : 2013 : R2018 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
ASTM D 8268 : 2019 Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber
ASTM D 2632 : 2015 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 3389 : 2016 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 6370 : 1999 : R2019 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM C 864 : 2005 : R2019 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
ASTM F 1859 : 2014 : EDT 1 Standard Specification for Rubber Sheet Floor Covering Without Backing
ASTM C 1401 : 2014 Standard Guide for Structural Sealant Glazing
ASTM D 6048 : 2007 : R2018 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

ASTM D 1646 : 2000 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3053 : 2018 Standard Terminology Relating to Carbon Black
ASTM D 1076 : 2015 : R2020 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 1148 : 2013 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D 1646 : 2004 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 6085 : 1997 : R2006 Standard Practice for Sampling in Rubber Testing-Terminology and Basic Concepts
ASTM D 1765 : 2005 : REV A : EDT 1 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1148 : 2007 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
ASTM D 3053 : 2015 Standard Terminology Relating to Carbon Black
ASTM D 1646 : 1981 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
ASTM D 1765 : 2003 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1415 : 2005 Standard Test Method for Rubber Property—International Hardness
ASTM D 1765 : 2004 : EDT 1 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 6085 : 1997 : R2011 Standard Practice for Sampling in Rubber Testing<char: emdash>Terminology and Basic Concepts
ASTM D 1765 : 2017 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 5603 : 2001 : R2008 Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber
ASTM D 3053 : 2008 Standard Terminology Relating to Carbon Black
ASTM D 1415 : 1988 : R1999 Standard Test Method for Rubber Property-International Hardness
ASTM D 1076 : 2006 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 3053 : 2008 : REV B Standard Terminology Relating to Carbon Black
ASTM D 1765 : 2014 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1415 : 2018 Standard Test Method for Rubber Property—International Hardness
ASTM D 3053 : 1999 : EDT 1 Standard Terminology Relating to Carbon Black
ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1765 : 2000 : REV A Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1415 : 1988 : R2004 Standard Test Method for Rubber Property—International Hardness
ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3053 : 2010 Standard Terminology Relating to Carbon Black
ASTM D 1076 : 2015 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 1765 : 2018 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1765 : 2001 : EDT 1 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1765 : 2019 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1076 : 2014 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 1765 : 2004 : REV A Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1646 : 2003 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1646 : 2015 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 6085 : 1997 : R2002 Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts
ASTM D 3053 : 2004 Standard Terminology Relating to Carbon Black
ASTM D 5992 : 1996 : R2018 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D 1646 : 2003 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1765 : 2001 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 3053 : 2005 Standard Terminology Relating to Carbon Black
ASTM D 3053 : 2017 Standard Terminology Relating to Carbon Black
ASTM D 3053 : 1999 Standard Terminology Relating to Carbon Black
ASTM D 1765 : 2016 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1148 : 2007 : REV A Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
ASTM D 5992 : 1996 : R2011 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D 1765 : 2005 : REV A Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1765 : 2013 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 6085 : 1997 Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts
ASTM D 3053 : 2006 Standard Terminology Relating to Carbon Black
ASTM D 5603 : 2019 : REV A Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber
ASTM D 1765 : 2006 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1076 : 1997 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 1415 : 1968 Standard Test Method for International Hardness Of Vulcanized Rubber
ASTM D 1646 : 2006 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3053 : 2008 : REV A Standard Terminology Relating to Carbon Black
ASTM D 1415 : 1988 : R1994 Standard Test Method for Rubber Property-International Hardness
ASTM D 1646 : 2007 : R2012 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3053 : 2013 : REV A Standard Terminology Relating to Carbon Black
ASTM D 3053 : 2017 : REV A Standard Terminology Relating to Carbon Black
ASTM D 3053 : 2006 : REV A Standard Terminology Relating to Carbon Black
ASTM D 5992 : 1996 : R2006 : EDT 1 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D 5603 : 1996 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 1148 : 2013 : R2018 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D 1765 : 2010 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 5992 : 1996 : R2001 : EDT 1 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D 5603 : 2001 : R2015 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 1415 : 2006 : R2012 Standard Test Method for Rubber Property—International Hardness
ASTM D 3053 : 2004 : REV B Standard Terminology Relating to Carbon Black
ASTM D 5603 : 2019 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 1646 : 2007 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1415 : 2006 Standard Test Method for Rubber Property—International Hardness
ASTM D 5603 : 2001 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 1646 : 2017 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1148 : 1995 Standard Test Method for Rubber Deterioration—Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
ASTM D 1765 : 2004 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 3053 : 2013 Standard Terminology Relating to Carbon Black
ASTM D 3053 : 2017 : REV A : EDT 1 Standard Terminology Relating to Carbon Black
ASTM D 1646 : 1992 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
ASTM D 6085 : 1997 : R2016 Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts
ASTM D 5992 : 1996 : R2006 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D 1765 : 2005 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D 1076 : 2010 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D 3053 : 2004 : REV A Standard Terminology Relating to Carbon Black
ASTM D 1076 : 2002 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.