• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4332 : 2022

Current

Current

The latest, up-to-date edition.

Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-06-2022

£42.23
Excluding VAT

Committee
D 10
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This practice provides for standard and special conditioning and testing atmospheres that may be used to simulate particular field conditions that a container, package, or packaging component may encounter during its life or testing cycle.

1.2This practice describes procedures for conditioning these containers, packages, or packaging components so that they approach or reach equilibrium with the atmosphere to which they may be exposed. This standard is commonly used for conditioning when conducting transit simulation tests.

1.3Practice D685 should be used as the relevant conditioning standard when quantification of box compression strength at standard atmosphere conditions is required.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 7386 : 2016 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
ASTM D 5458 : 1995 : R2020 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D4003:1998(R2019)e1 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems<br>
ASTM F 2095 : 2007 : R2021 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM F 3159 : 2015 : R2022 Standard Safety Specification for Liquid Laundry Packets
ASTM D 4577 : 2019 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D 5276 : 2019 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D 3759/D3759M : 2005 : R2019 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM F 2825 : 2018 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
ASTM D 5330/D5330M : 2006 : R2020 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM E 1133 : 1986 : R2022 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM D 6653/D6653M : 2013 : R2021 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D 3833/D3833M : 1996 : R2019 Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
ASTM D 999 : 2008 : R2015 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D 5265 : 2009 : R2016 Standard Test Method for Bridge Impact Testing
ASTM D 6804 : 2019 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D 6252/D6252M : 1998 : R2019 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D 3889/D3889M : 1996 : R2020 Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
ASTM D 4169 : 2022 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 7387 : 2020 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
ASTM F2824:2010(R2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids<br>
ASTM D 3813/D3813M : 1998 : R2020 Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM D 1596 : 2014 : R2021 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
ASTM D 951 : 2017 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
ASTM D 6787/D6787M : 2002 : R2017 Standard Specification for Repositionable Note Pad
ASTM D 642 : 2020 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM D 3611 : 2006 : R2019 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D 1975 : 2016 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
ASTM D 2063/D2063M : 2010 : R2018 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
ASTM D 6179 : 2020 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 3950 : 2017 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM F 1980 : 2021 Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
ASTM D 5264 : 1998 : R2019 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM F 2029 : 2016 : R2021 Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
ASTM D 3811/D3811M : 2021 : REV A Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D 880 : 1992 : R2021 Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 6055 : 1996 : R2019 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM F 3300 : 2018 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM D 3652/D3652M : 2001 : R2020 Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM D 7790 : 2019 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
ASTM D 3330/D3330M : 2004 : R2018 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D 3103 : 2020 Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D 3332 : 1999 : R2016 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 5277 : 1992 : R2015 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D 8409 : 2021 Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or Unguided Loads
ASTM D 5909 : 2020 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3580 : 1995 : R2015 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D 5094/D5094M : 2009 : R2014 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures (Withdrawn 2023)
ASTM D 4919 : 2017 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
ASTM D 6788 : 2002 : R2017 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 1185 : 1998 : REV A : R2017 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D 3654/D3654M : 2006 : R2019 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM D 2221 : 2001 : R2021 Standard Test Method for Creep Properties of Package Cushioning Materials
ASTM D 6344 : 2004 : R2017 Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D 5112 : 1998 : R2015 Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
ASTM D 3816/D3816M : 1996 : R2020 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D 5750/D5750M : 1995 : R2020 Standard Guide for Width and Length of Pressure-Sensitive Tape
ASTM F 2097 : 2020 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
ASTM E 171/E171M : 2011 : R2020 Standard Practice for Conditioning and Testing Flexible Barrier Packaging
ASTM D 5375/D5375M : 1998 : R2019 Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM D 2860/D2860M : 2018 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
ASTM D 6295/D6295M : 1998 : R2019 Standard Test Method for Dispensability of Light–Duty Pressure–Sensitive Film Tape (Withdrawn 2023)
ASTM D 7860 : 2014 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
ASTM D 2658 : 2018 Standard Test Method for Determining Dimensions of Fiberboard Boxes

ASTM D 996 : 2023 Standard Terminology of Packaging and Distribution Environments
ASTM E 337 : 2015 : R2023 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E 337 : 2015 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D 996 : 2016 Standard Terminology of Packaging and Distribution Environments

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.