• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 5900 : 2017 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
Available format(s)

Hardcopy , PDF

Superseded date

24-11-2020

Language(s)

English

Published date

16-02-2018

1.1This specification covers the chemical and physical quality specifications or requirements, or both, for Industry Reference Materials (IRMs) as cited in Practice D4678 and other standards.

1.2IRMs, as evaluated and referenced in Practice D4678, are vitally important to conduct product, specification, and development testing in the rubber and carbon black industries.

1.3Before a new lot of material can be accepted as an IRM, it must comply with the specifications prescribed in this specification. However, these specifications are only part of the requirements. Other requirements as given in Practice D4678 shall be met before a candidate material can be formally accepted as an IRM.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 11
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 4678 : 2015 : REV A Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 5964 : 2016 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids

ASTM D 4936 : 1996 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/ Titration
ASTM D 1646 : 2000 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2161 : 2005 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 4569 : 2006 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
ASTM D 4936 : 2010 : R2015 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 3280 : 1985 : R1999 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 4569 : 2002 Standard Test Method for Rubber Chemicals—Determination of Acidity in Sulfur
ASTM D 4574 : 2006 : R2012 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D 2161 : 2019 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 6738 : 2011 Standard Test Method for Precipitated Silica<char: emdash>Volatile Content
ASTM D 1646 : 2004 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2501 : 1991 : R2000 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2007 : 2003 : R2008 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 3157 : 1984 : R2001 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 3194 : 2004 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
ASTM D 3280 : 1985 : R2020 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 2161 : 2010 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 1747 : 2009 : R2019 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 4315 : 1994 : R2001 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 1993 : 1991 : R1997 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 1646 : 1981 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
ASTM D 5289 : 2006 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 4936 : 2005 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 1993 : 2003 : R2013 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 4578 : 2006 : R2012 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM D 2140 : 1997 Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 2161 : 1982 Standard Method for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 1519 : 1995 : R2009 : EDT 1 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D 4569 : 1989 : R1998 Standard Test Method for Rubber Chemicals-Determination of Acidity in Sulfur
ASTM D 6854 : 2012 : REV A Standard Test Method for Silica-Oil Absorption Number
ASTM D 4570 : 2002 : R2012 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 1278 : 1991 : REV A : R2002 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM D 5289 : 2007 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 5289 : 2017 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2161 : 2010 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2007 : 2003 : EDT 1 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 1519 : 1995 : R2019 Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D 5289 : 2007 : REV A Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 1519 : 1995 : R2009 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D 4075 : 2002 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
ASTM D 4571 : 1994 : R1998 Standard Test Methods for Rubber Chemicals-Determination of Volatile Material
ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM D 4075 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
ASTM D 4678 : 2004 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 4004 : 2006 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D 2007 : 2019 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 6738 : 2015 : R2019 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 4678 : 1994 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 1500 : 2004 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3280 : 1985 : R2004 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 1960 : 1986 : R1995 : EDT 1 Standard Test Method for Loss on Heating of Drying Oils (Withdrawn 2003)
ASTM D 4075 : 1987 : R1997 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
ASTM D 1980 : 1987 : R1998 Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids (Withdrawn 2007)
ASTM D 3157 : 2005 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 3157 : 2005 : R2010 : EDT 1 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 6845 : 2002 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D 1519 : 1995 : R2014 Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4678 : 2011 Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 6739 : 2020 Standard Test Method for Silica—pH Value
ASTM D 5289 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 3157 : 2005 : R2015 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 2007 : 2011 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 5289 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 4936 : 2010 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 6739 : 2011 Standard Test Method for Silica<char: emdash>pH Value
ASTM D 6739 : 2001 Standard Test Method for Silica—pH Value
ASTM D 2007 : 2002 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 4934 : 2002 : R2012 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
ASTM D 4578 : 2006 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM D 1965 : 1987 : R1998 Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids (Withdrawn 2007)
ASTM D 4578 : 1989 : R1998 Standard Test Methods for Rubber Chemicals-Determination of Percent Insoluble Sulfur by Solvent Extraction
ASTM D 1500 : 2012 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6845 : 2002 : R2008 Standard Test Method for Silica, Precipitated, Hydrated<span class='unicode'>—</span>CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D 6738 : 2001 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 4315 : 1994 : R2017 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 1993 : 2003 : R2008 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 1959 : 1997 Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006)
ASTM D 4574 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D 1278 : 1991 : REV A : R2015 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 2140 : 2008 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 4936 : 2010 : R2019 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 1646 : 2003 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2501 : 2011 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 1646 : 2015 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4574 : 1994 : R1998 Standard Test Methods for Rubber Chemicals-Determination of Ash Content
ASTM D 4578 : 2006 : R2017 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM D 6854 : 2003 Standard Test Method for Silica—<i>n</i>-Dibutyl Phthalate Absorption Number
ASTM D 6854 : 2015 : REV A Standard Test Method for Silica—Oil Absorption Number (OAN) (Withdrawn 2018)
ASTM D 4678 : 2004 : R2009 : EDT 1 Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 3194 : 2004 : R2009 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
ASTM D 2007 : 2001 : REV A Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 4574 : 2006 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D 4578 : 1989 : R2002 Standard Test Methods for Rubber Chemicals—Determination of Percent Insoluble Sulfur by Solvent Extraction
ASTM D 1646 : 2003 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1500 : 2003 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1278 : 1991 : REV A : R2011 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 2501 : 1991 : R2005 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 1747 : 1962 : R1978 Standard Test Method for Refractive Index Of Viscous Materials
ASTM D 1500 : 1982 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6739 : 2001 : R2006 Standard Test Method for Silica - pH Value
ASTM D 1747 : 2009 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 3157 : 2005 : R2020 Standard Test Method for Rubber from Natural Sources—Color
ASTM D 2140 : 2008 : R2017 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 5289 : 1995 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 5668 : 2009 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D 5289 : 2012 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 1500 : 2002 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 2007 : 2011 : R2016 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 6845 : 2018 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D 4570 : 2002 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 2501 : 2014 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 4934 : 2002 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
ASTM D 1519 : 1995 : R2000 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D 3280 : 1985 : R2009 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 6845 : 2020 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D 1500 : 1998 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 3194 : 1999 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
ASTM D 5668 : 2009 : R2014 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
ASTM D 1982 : 1985 : R1999 Standard Test Method for Titer of Fatty Acids
ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 5668 : 2019 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
ASTM D 4571 : 2006 : R2012 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D 4571 : 2002 Standard Test Methods for Rubber Chemicals—Determination of Volatile Material
ASTM D 4570 : 2002 : R2017 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM D 1747 : 2009 : R2014 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 4678 : 2015 : REV A Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 1646 : 2006 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4569 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
ASTM D 1951 : 1986 : R1995 : EDT 1 Standard Test Method for Ash in Drying Oils and Fatty Acids (Withdrawn 2003)
ASTM D 3194 : 2017 Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
ASTM D 6845 : 2012 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D 1646 : 2007 : R2012 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1982 : 1985 : R2009 Standard Test Method for Titer of Fatty Acids
ASTM D 4574 : 2002 Standard Test Methods for Rubber Chemicals—Determination of Ash Content
ASTM D 6738 : 2001 : R2006 Standard Test Method for Precipitated Silica-Volatile Content
ASTM D 4934 : 1994 : R1998 : EDT 1 Standard Test Method for Rubber Compounding Materials 2-Benzothiazyl Sulfenamide Accelerators-Insolubles
ASTM D 4004 : 1993 : R2002 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D 4569 : 2006 : R2012 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
ASTM D 4571 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D 4572 : 1989 : R2017 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
ASTM D 3280 : 1985 : R2014 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 4934 : 2002 : R2017 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
ASTM D 4572 : 1989 : R2005 Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
ASTM D 1747 : 1999 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 2161 : 1993 : R1999 : EDT 2 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 1278 : 1991 : REV A : R2020 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 5668 : 1999 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D 4571 : 2006 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D 1982 : 2013 : R2017 Standard Test Method for Titer of Fatty Acids
ASTM D 4678 : 2015 : REV A : R2019 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 2007 : 2003 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 1646 : 2007 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3037 : 1993 Standard Test Methods for Carbon Black—Surface Area by Nitrogen Adsorption (Withdrawn 1999)
ASTM D 1646 : 2017 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4315 : 1994 : R2006 Standard Test Methods for Rubber Compounding Material-Zinc Oxide
ASTM D 1993 : 2018 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 6854 : 2003 : R2008 Standard Test Method for Silica<span class='unicode'>—</span><span class="bdit">n</span>-Dibutyl Phthalate Absorption Number
ASTM D 4572 : 1989 : R2012 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
ASTM D 1993 : 2003 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 1982 : 1985 : R2004 Standard Test Method for Titer of Fatty Acids
ASTM D 4934 : 2002 : R2006 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles
ASTM D 6738 : 2015 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 4315 : 1994 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 4075 : 2006 Standard Test Methods for Rubber Compounding Materials—Flame Atomic AbsorptionAnalysis—Determination of Metals
ASTM D 4678 : 2004 : R2009 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 2161 : 2010 : R2016 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 1966 Standard Method Of Test For Conversion Of Kinematic Viscosity To Saybolt Universal Viscosity Or To Saybolt Furol Viscosity
ASTM D 4004 : 2006 : R2012 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D 6854 : 2012 Standard Test Method for Silica—<emph type="bdit">n</emph>-Dibutyl Phthalate Absorption Number
ASTM D 1278 : 1991 : REV A : R2007 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 4004 : 2006 : R2017 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D 2007 : 2001 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 4315 : 1994 : R2012 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 1646 : 1992 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1500 : 2004 : REV A Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6854 : 2015 Standard Test Method for Silica-Oil Absorption Number
ASTM D 1500 : 2007 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 4004 : 1993 : R1998 Standard Test Methods for Rubber-Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D 1993 : 2003 : R2013 : EDT 1 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 2161 : 2004 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 1519 : 1995 : R2004 : EDT 1 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D 2501 : 2014 : R2019 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 4570 : 1986 : R1998 Standard Test Method for Rubber Chemicals-Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 6739 : 2011 : R2015 Standard Test Method for Silica—pH Value
ASTM D 2161 : 2017 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 4075 : 2006 : R2012 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
ASTM D 5668 : 2008 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
ASTM D 2161 : 2005 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2140 : 2003 Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 2007 : 1998 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D 4570 : 2002 : R2007 Standard Test Method for Rubber Chemicals<span class='unicode'>—</span>Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 1982 : 2013 Standard Test Method for Titer of Fatty Acids
ASTM D 4678 : 2015 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 4572 : 1989 : R1999 Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
ASTM D 3157 : 1984 : R1995 : EDT 1 Standard Test Method for Rubber from Natural Sources—Color

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.