• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6469 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Microbial Contamination in Fuels and Fuel Systems
Available format(s)

Hardcopy , PDF

Superseded date

07-10-2020

Language(s)

English

Published date

01-06-2017

1.1This guide provides personnel who have a limited microbiological background with an understanding of the symptoms, occurrence, and consequences of chronic microbial contamination. The guide also suggests means for detection and control of microbial contamination in fuels and fuel systems. This guide applies primarily to gasoline, aviation, boiler, industrial gas turbine, diesel, marine, furnace fuels and blend stocks (see Specifications D396, D910, D975, D1655, D2069, D2880, D3699, D4814, D6227, and D6751), and fuel systems. However, the principles discussed herein also apply generally to crude oil and all liquid petroleum fuels. ASTM Manual 472 provides a more detailed treatment of the concepts introduced in this guide; it also provides a compilation of all of the standards referenced herein that are not found in the Annual Book of ASTM Standards, Section Five on Petroleum Products and Lubricants.

1.2This guide is not a compilation of all of the concepts and terminology used by microbiologists, but it does provide a general understanding of microbial fuel contamination.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Guide
Pages
12
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 4814 : 2019 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7467 : 2019 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7566 : 2019 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4418 : 2017 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 396 : 2019 Standard Specification for Fuel Oils
ASTM D 7847 : 2017 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D 7719 : 2018 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 7794 : 2018 : REV A Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
ASTM D 6974 : 2016 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 7544 : 2012 : R2017 Standard Specification for Pyrolysis Liquid Biofuel
ASTM D 3699 : 2018 : REV A Standard Specification for Kerosine
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 910 : 2017 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM E 3152 : 2018 Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents
ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 7960 : 2018 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 6751 : 2019 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7547 : 2018 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 7826 : 2019 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

ASTM D 3241 : 2008 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3325 : 1990 : R2002 : EDT 1 Standard Practice for Preservation of Waterborne Oil Samples
ASTM E 1326 : 1998 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 3241 : 2009 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2005 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4840 : 1999 : R2018 : EDT 1 Standard Guide for Sample Chain-of-Custody Procedures
ASTM D 3328 : 2006 : R2020 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 2274 : 2010 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM E 1326 : 2015 Standard Guide for Evaluating Non-culture Microbiological Tests Used for Enumerating Bacteria
ASTM D 3325 : 1990 : R1996 : EDT 1 Standard Practice for Preservation of Waterborne Oil Samples
ASTM D 3699 : 2019 Standard Specification for Kerosine
ASTM D 6974 : 2016 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 4012 : 1981 : R2009 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 4814 : 2004 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3240 : 2011 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1976 : 2002 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D 7463 : 2016 : EDT 1 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 1067 : 2006 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 7463 : 2014 : REV A Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 3240 : 2015 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 7464 : 2020 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4012 : 2015 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 6426 : 1999 Standard Test Method for Determining Filterability of Distillate Fuel Oils
ASTM D 3867 : 2016 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 3699 : 2006 Standard Specification for Kerosine
ASTM D 6227 : 2014 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 4814 : 2016 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4840 : 1999 Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D 4860 : 1991 : R1995 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
ASTM E 1326 : 2015 : REV A Standard Guide for Evaluating Non-culture Microbiological Tests
ASTM D 3699 : 2002 Standard Specification for Kerosine
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4176 : 1993 : R1997 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 1067 : 2002 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6974 : 2009 : R2013 : EDT 2 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 2068 : 2008 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 3241 : 2001 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4176 : 2004 : R2019 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 4814 : 2014 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2274 : 2001 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4814 : 2001 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2068 : 2010 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 4454 : 1985 : R1997 Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy
ASTM D 4814 : 2004 : REV B : EDT 1 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1426 : 1998 Standard Test Methods for Ammonia Nitrogen In Water
ASTM D 2068 : 2017 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2006 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4814 : 2015 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2004 Standard Specification for Kerosine
ASTM D 4814 : 2000 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 3870 : 1991 Standard Practice for Establishing Performance Characteristics for Colony Counting Methods in Microbiology (Withdrawn 2000)
ASTM D 6751 : 2006 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5304 : 2000 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 4860 : 2008 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4952 : 2002 : R2007 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 3328 : 2000 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 3241 : 2014 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2011 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 2002 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6751 : 2007 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2006 : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4012 : 1981 : R2002 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4418 : 2000 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 4870 : 2018 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2018 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3241 : 2014 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6751 : 2009 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2880 : 2000 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3242 : 1998 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 6751 : 2007 : REV B : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6227 : 1999 Standard Specification for Grade 82 Unleaded Aviation Gasoline
ASTM D 3241 : 2017 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM E 1326 : 2006 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 4814 : 2018 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2274 : 2003 : REV A : R2008 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4860 : 2014 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 3325 : 1990 : R2020 Standard Practice for Preservation of Waterborne Oil Samples
ASTM D 8070 : 2020 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D 3241 : 2020 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3699 : 2013 : REV B Standard Specification for Kerosine
ASTM D 3240 : 2005 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 3414 : 1998 : R2004 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D 6751 : 2007 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5304 : 2005 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 2069 : 1991 : R1998 Standard Specification for Marine Fuels (Withdrawn 2003)
ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2068 : 1997 Standard Test Method for Filter Blocking Tendency of Distillate Fuel Oils
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4814 : 2018 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 3241 : 2018 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2880 : 1990 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2012 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3699 : 2018 : REV A Standard Specification for Kerosine
ASTM D 4814 : 1995 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 3241 : 2014 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2009 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4952 : 1997 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 7463 : 2008 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
ASTM D 3241 : 2015 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3699 : 2013 : REV B : EDT 1 Standard Specification for Kerosine
ASTM D 1331 : 1989 : R2001 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents (Withdrawn 2010)
ASTM D 4814 : 2016 : REV : EDT 0 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 2017 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2008 Standard Specification for Kerosine
ASTM D 6426 : 2007 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 6974 : 2009 : R2013 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 7978 : 2014 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
ASTM D 3240 : 1991 : R2001 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 6751 : 2014 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM E 1326 : 2008 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 2880 : 2013 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2020 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2274 : 2003 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 6426 : 2004 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D 3699 : 2013 Standard Specification for Kerosine
ASTM D 3240 : 1991 : R1996 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 1976 : 2018 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D 7464 : 2019 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 4814 : 2012 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 3325 : 1990 : R2006 Standard Practice for Preservation of Waterborne Oil Samples
ASTM D 7978 : 2014 : R2019 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2016 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7463 : 2015 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2005 Standard Specification for Kerosine
ASTM D 4952 : 2012 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 2068 : 2004 Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
ASTM D 3867 : 1999 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2019 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2010 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5304 : 2002 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 4814 : 2003 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1331 : 2014 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D 3242 : 2007 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 2880 : 2013 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 1976 : 1996 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM E 1259 : 2010 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM D 4814 : 2001 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2009 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5452 : 2012 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 7687 : 2011 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
ASTM D 4860 : 1991 : R2005 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 3326 : 2007 : R2011 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2011 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5452 : 2000 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 4814 : 2008 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2276 : 2005 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 3241 : 2015 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3326 : 2007 : R2017 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 2880 : 2018 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4418 : 2000 : R2011 Standard Practice for Receipt, Storage, and Handling of Fuels for<br> Gas Turbines
ASTM D 7464 : 2008 : R2013 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 4176 : 2004 : R2009 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 4814 : 2003 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2015 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2880 : 1998 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6227 : 2017 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 6227 : 2004 Standard Specification for Grade 82 Unleaded Aviation Gasoline
ASTM D 3242 : 2001 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3699 : 2003 Standard Specification for Kerosine
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 8070 : 2019 : REV A Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D 4412 : 2015 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 4814 : 2020 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2004 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2015 : REV C Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2068 : 2012 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 4870 : 2009 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 5304 : 2006 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 5452 : 2006 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 6751 : 2015 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2010 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1126 : 2002 Standard Test Method for Hardness in Water
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3242 : 2008 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3242 : 2005 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3241 : 2008 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM E 1259 : 1994 Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM D 1293 : 1999 Standard Test Methods for pH of Water
ASTM D 2880 : 2003 : R2010 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4870 : 2007 : REV A Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 7463 : 2018 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 5452 : 2005 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 3325 : 1990 : R2013 Standard Practice for Preservation of Waterborne Oil Samples
ASTM D 3241 : 2001 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6227 : 2000 Standard Specification for Grade 82 Unleaded Aviation Gasoline
ASTM D 6426 : 2013 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D 3326 : 2007 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 4814 : 2009 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4412 : 1984 : R2009 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 3699 : 1978 Standard Specification for Kerosine
ASTM D 6751 : 2002 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2003 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4814 : 2011 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3326 : 1990 : R1996 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3414 : 1998 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 2274 : 1994 : R1999 : EDT 1 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4870 : 2009 : R2014 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 4952 : 2002 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 4814 : 2008 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6426 : 2001 Standard Test Method for Determining Filterability of Distillate Fuel Oils
ASTM D 4418 : 1988 : R1998 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 6751 : 2020 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2002 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2011 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2019 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 1998 Standard Specification for Kerosine
ASTM D 6751 : 2003 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 2880 : 2015 Standard Specification for Gas Turbine Fuel Oils
ASTM D 3241 : 2005 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1293 : 1999 : R2005 Standard Test Methods for pH of Water
ASTM D 3867 : 2009 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 4814 : 2006 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2007 Standard Specification for Kerosine
ASTM D 6751 : 2008 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6974 : 2009 : R2013 : EDT 1 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 3328 : 2006 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 3241 : 2002 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6751 : 2019 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1976 : 2020 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D 6974 : 2009 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 4814 : 2007 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4176 : 2004 : R2014 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 3241 : 2015 : EDT 2 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4012 : 1981 : R1997 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 2276 : 2006 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 4814 : 2018 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1126 : 2012 Standard Test Method for Hardness in Water
ASTM D 1067 : 2016 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 4814 : 2006 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4870 : 2004 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2068 : 2013 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 3241 : 2014 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 1992 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 3414 : 1998 : R2011 : EDT 1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy (Withdrawn 2018)
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 4814 : 2014 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2015 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4860 : 1991 : R2000 : EDT 1 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 5304 : 2015 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 1126 : 2002 : R2007 : EDT 1 Standard Test Method for Hardness in Water
ASTM D 6227 : 2012 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 3699 : 2001 Standard Specification for Kerosine
ASTM D 7463 : 2016 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 6974 : 2003 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels-Filtration and Culture Procedures
ASTM D 6217 : 2011 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 3699 : 2018 Standard Specification for Kerosene
ASTM D 3326 : 1990 : R2002 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 4418 : 2000 : R2016 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 4814 : 2007 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6974 : 2020 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 5304 : 2011 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 4418 : 2000 : R2006 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 4814 : 2009 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM E 1259 : 2005 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM D 8070 : 2016 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D 3328 : 2006 : R2013 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 6751 : 2015 : REV C : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2019 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4870 : 1999 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 5304 : 2003 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 4814 : 2018 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2013 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2068 : 2014 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 2068 : 2012 : REV A Standard Test Method for Determining Filter Blocking Tendency
ASTM D 6751 : 2007 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 2880 : 2014 Standard Specification for Gas Turbine Fuel Oils
ASTM E 1259 : 2001 Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM D 3241 : 2002 : REV A : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4814 : 2016 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4412 : 1984 : R2002 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2017 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 1998 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4814 : 2000 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4860 : 2014 : R2019 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 1126 : 1996 Standard Test Method for Hardness in Water
ASTM D 6426 : 2002 : REV A Standard Test Method for Determining Filterability of Distillate Fuel Oils
ASTM D 5304 : 2002 : REV A Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 1067 : 1988 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 4418 : 2017 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
ASTM D 4814 : 2013 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2274 : 2003 : REV A Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4814 : 2004 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4952 : 2009 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2011 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1976 : 2007 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D 2880 : 2013 : REV B Standard Specification for Gas Turbine Fuel Oils
ASTM D 3326 : 1990 : R1996 : EDT 1 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2011 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 1331 : 1989 : R1995 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D 3241 : 2005 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1426 : 2008 Standard Test Methods for Ammonia Nitrogen In Water
ASTM D 3699 : 2013 : REV A Standard Specification for Kerosine
ASTM D 3241 : 2013 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 6426 : 2018 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D 2880 : 1996 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2011 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6974 : 2004 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 7463 :2014 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
ASTM D 6751 : 2015 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1331 : 2011 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D 1426 : 2015 Standard Test Methods for Ammonia Nitrogen In Water
ASTM D 1293 : 2012 Standard Test Methods for pH of Water
ASTM D 4860 : 2013 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 4814 : 1993 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM E 1259 : 2018 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 °C
ASTM D 3241 : 2014 : REV B : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3867 : 2004 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1744 : 1992 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2000)
ASTM D 4814 : 2019 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2880 : 2018 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4952 : 2012 : R2017 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1976 : 2019 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2014 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2276 : 2000 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 3242 : 2011 : R2017 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 4454 : 1985 : R2009 Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy (Withdrawn 2015)
ASTM D 6426 : 2002 Standard Test Method for Determining Filterability of Distillate Fuel Oils
ASTM D 3241 : 2016 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6227 : 2004 : REV A Standard Specification for Grade 82 Unleaded Aviation Gasoline
ASTM D 3241 : 2012 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6751 : 2009 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4176 : 2004 : EDT 1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 4814 : 2018 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2274 : 2001 : REV A Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4176 : 2002 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM E 1259 : 2016 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM D 2274 : 2014 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5452 : 2008 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 4412 : 1984 : R1997 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 2880 : 1978 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1744 : 2013 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)
ASTM D 1067 : 2011 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1976 : 2012 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D 6217 : 2010 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 4814 : 2007 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM E 1326 : 2013 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 1293 : 1984 : R1990 Standard Test Methods for pH of Water
ASTM D 4814 : 2013 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2010 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 7464 : 2008 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 4860 : 2007 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 3241 : 2004 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4870 : 2007 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D 2880 : 2003 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4176 : 2004 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6751 : 2002 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6217 : 2011 : R2016 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 3241 : 2016 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2011 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1426 : 2003 Standard Test Methods for Ammonia Nitrogen In Water
ASTM D 1067 : 1992 : R1996 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 3242 : 2011 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 6227 : 2010 Standard Specification for Grades UL82 and UL87 Unleaded Aviation Gasoline
ASTM D 6217 : 1998 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 2880 : 2014 : REV A Standard Specification for Gas Turbine Fuel Oils

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.