• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 996 : 2016 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Terminology of Packaging and Distribution Environments

Available format(s)

PDF

Superseded date

25-03-2023

Language(s)

English

Published date

10-11-2016

£63.73
Excluding VAT

CONTAINED IN VOL. 15.09, 2015 Provides definitions of technical terms employed in distribution and packaging environments.

Committee
D 10
DocumentType
Redline
Pages
13
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

1.1This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.

1.2A definition is a single sentence with additional information included in discussions.

1.3Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.

1.4The definitions in this terminology are grouped into related areas under principal concepts. The broad descriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

1.5Terminology related to flexible barrier packaging is found in Terminology F17.

ASTM D 5749 : 2017 : REDLINE Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
ASTM D 6880 : 2005 Standard Specification for Wood Boxes
MIL-W-10430 Revision D:1994 WELDING RODS AND ELECTRODES, PACKAGING OF
ASTM D 1974/D1974M : 2016 : REDLINE Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
ASTM D 6398 : 2008 Standard Practice to Enhance Identification of Drug Names on Labels
ASTM D 7478/D7478M : 2011 Standard Specification for Heavy Duty Sheathed Wood Crates
ASTM F 2338 : 2009 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
MIL-H-775 Revision E:1987 HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF
ASTM D 5265 : 2009 Standard Test Method for Bridge Impact Testing
MIL-E-16298 Revision D:1989 ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF
ASTM D 2063 : 1991 : R2002 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
MIL-S-196 Revision D:1988 SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF
ASTM D 5728 : 2012 : REDLINE Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
ASTM D 4504 : 1994 : R2000 : EDT 1 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM D 3069 : 1994 : R1999 : EDT 1 Standard Test Method for Delivery Rate of Aerosol Products
ASTM D 4168 : 1995 : R2002 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM D 3833/D3833M : 1996 : R2006 Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
ASTM F 2391 : 2005 : R2016 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
MIL-E-17555 Revision H:1984 ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF
MIL-HDBK-773 Revision A:2005 ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
ASTM D 5118/D5118M : 2015 : REDLINE Standard Practice for Fabrication of Fiberboard Shipping Boxes
PPP-B-576 Revision C:1993 BOX, WOOD-CLEATED PANELBOARD
ASTM D 3580 : 1995 : R2004 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D 5094 : 2004 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D 5459 : 1995 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D 3813/D3813M : 1998 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D 6590/D6590M : 2000 : R2006 Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM D 6295/D6295M:1998 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D 5748 : 1995 : R2007 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D 6255/D6255M:2005 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM D 1185 : 1998 : REV A Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D 7298 : 2006 : R2011 : EDT 1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D 3089 : 1997 : R2017 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes (Withdrawn 2023)
ASTM D 6537 : 2000 : R2014 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D 5834 : 1995 Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)
ASTM D 3833/D3833M : 1996 : R2001 Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 3087 : 1991 : R1998 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM D 7434 : 2008 : R2014 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads (Withdrawn 2018)
ASTM D 5570 : 1994 : R2005 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
ASTM D 3332 : 1999 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 3332 : 1999 : R2016 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 880 : 1992 : R2002 Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 4003 : 1998 : R2009 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM D 4504 : 1994 : R2011 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM D 5330/D5330M : 2006 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM D 5748 : 1995 : R2001 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D 5458 : 1995 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D 1185 : 1998 : REV A : R2003 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM F 2338 : 2009 : R2013 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM D 5168 : 2012 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 2063/D2063M : 2010 : R2012 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
ASTM D 6398 : 2008 : R2014 Standard Practice to Enhance Identification of Drug Names on Labels (Withdrawn 2022)
ASTM D 880 : 1992 : R2015 Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 5112 : 1998 : R2003 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D 5487 : 2016 : REDLINE Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D 4774 : 2011 Standard Specification for User Applied Drug Labels in Anesthesiology
ASTM D 895 : 1994 Standard Test Method for Water Vapor Permeability of Packages (Withdrawn 1999)
ASTM D 5264 : 1998 Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM D 4775 : 2004 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
ASTM D 5414 : 1995 : R2001 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
ASTM D 6653 : 2001 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D 5331 : 2003 : R2016 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM D 6804 : 2002 : R2011 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D 3816/D3816M : 1996 : R2001 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM F 1585 : 2000 Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006)
ASTM D 7030 : 2004 : R2009 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D 5277 : 1992 : R2008 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D 5277 : 1992 : R2015 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
MIL-STD-1365 Revision C:2010 GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS
ASTM D 7387 : 2013 : REDLINE Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
ASTM D 3079 : 1994 : R2003 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D 5416 : 1995 : R2001 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D 4521 : 1996 Standard Test Method for Coefficient of Static Friction of Corrugated and Solid Fiberboard (Withdrawn 2001)
ASTM D 6653 : 2001 : R2006 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D 3715/D3715M : 1998 Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
ASTM D 5264 : 1998 : R2011 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
MIL-STD-147 Revision E:2008 PALLETIZED UNIT LOADS
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASTM D 2658 : 2004 : R2013 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ASTM D 3813/D3813M : 1998 : R2003 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D 2860/D2860M : 2018 : REDLINE Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
ASTM D 5277 : 1992 TEST METHOD FOR PERFORMING PROGRAMMED HORIZONTAL IMPACTS USING AN INCLINED IMPACT TESTER
ASTM D 5276 : 1998 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D 6344 : 2004 : R2009 Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D 4774 : 2011 : R2017 Standard Specification for User Applied Drug Labels in Anesthesiology (Withdrawn 2022)
ASTM D 3652/D3652M : 2001 : R2012 Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D 3330/D3330M : 2004 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D 6804 : 2002 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D 2063/D2063M : 2010 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
ASTM D 5112 : 1998 : R2015 Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
ASTM D 3715/D3715M : 1998 : R2004 Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
ASTM D 6055 : 1996 : R2002 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 5331 : 2003 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM D 4774 : 2011 : EDT 1 Standard Specification for User Applied Drug Labels in Anesthesiology
ASTM D 5168 : 2012 : R2017 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 7434 : 2008 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
ASTM D 5458 : 1995 : R2012 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D 6804 : 2002 : R2015 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D 3580 : 1995 : R1999 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D 3813/D3813M : 1998 : R2012 : EDT 1 Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM D 3332 : 1999 : R2004 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 951 : 2017 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
ASTM D 6253 : 2016 : REDLINE Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D 6055 : 1996 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 3482 : 2007 : REV A Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D 6788 : 2002 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 5415 : 1995 : R2001 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
ASTM D 5486/D5486M : 2006 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM D 3074 : 1994 Standard Test Methods for Pressure in Metal Aerosol Containers (Withdrawn 2000)
ASTM D 5416 : 1995 : R2012 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D 5416 : 1995 : R2007 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D 3652/D3652M : 2001 : R2006 Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D 3889/D3889M : 1996 : R2001 Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
ASTM D 1596 : 2014 : REDLINE Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
ASTM D 7580/D7580M : 2009 : R2014 Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads (Withdrawn 2018)
ASTM D 6537 : 2000 : R2006 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D 1251 : 1994 Standard Test Method for Water Vapor Permeability of Packages by Cycle Method (Withdrawn 1999)
ASTM D 6590/D6590M :2000 Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM D 7435 : 2008 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
ASTM D 7478/D7478M : 2011 : R2017 Standard Specification for Heavy Duty Sheathed Wood Crates
ASTM D 6590/D6590M : 2000 : R2012 Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM D 6653/D6653M : 2013 : REDLINE Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D 4279 : 1995 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM D 1185 : 1998 : REV A : R2017 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D 3084 : 2005 : R2012 Standard Practice for Alpha-Particle Spectrometry of Water
ASTM D 3811/D3811M : 1996 : R2018 Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D 5459 : 1995 : R2001 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D 4279 : 1995 : R2003 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM D 6255/D6255M : 2005 : R2011 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM D 6537 : 2000 Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
MIL-T-17286 Revision D:1989 TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF
ASTM D 2063 : 1991 : R1998 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
ASTM D 1975 : 2016 : REDLINE Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
ASTM D 4577 : 2005 : R2010 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D 880 : 1992 : R2008 Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 5112 : 1998 : R2009 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D 642 : 2015 : REDLINE Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM D 6252/D6252M : 1998 : R2011 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176 Angle
ASTM D 6252/D6252M : 1998 : R2004 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176 Angle
ASTM D 5077 : 1990 : R2009 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D 3076 : 2000 : R2005 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 5571 : 2016 : REDLINE Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
MIL-STD-904 Revision C:2010 Detection, Identification, and Prevention of Pest Infestation of Subsistence
ASTM D 6123/D6123M : 1997 : R2007 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM D 3652/D3652M : 2001 Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D 3813/D3813M : 1998 : R2007 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
CSA Z264.3 : 1998 : R2010 USER-APPLIED DRUG LABELS IN ANAESTHESIA AND CRITICAL CARE
ASTM D 5488 : 1994 TERMINOLOGY OF ENVIRONMENTAL LABELING OF PACKAGING MATERIALS AND PACKAGES
ASTM D 6198 : 2018 : REDLINE Standard Guide for Transport Packaging Design
MIL-B-233 Revision D:1987 BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE
ASTM D 3330/D3330M : 2004 : R2018 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D 3611 : 2006 : R2019 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D 6788 : 2002 : R2012 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 6179 : 2007 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 5459 : 1995 : R2012 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D 7030 : 2004 : R2017 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
CSA Z264.3 : 1998 : R2005 USER-APPLIED DRUG LABELS IN ANAESTHESIA AND CRITICAL CARE
ASTM D 3076 : 2000 : R2010 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 3079 : 1994 : R2009 : EDT 1 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products (Withdrawn 2018)
ASTM D 4775/D4775M : 2009 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
MIL-STD-2073-1 Revision E:2008 STANDARD PRACTICE FOR MILITARY PACKAGING
ASTM D 5375/D5375M : 1998 : R2004 Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM D 6179 : 2007 : R2014 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 3482 : 2007 : REV A : R2014 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D 5276 : 1998 : R2009 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D 4991 : 2007 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D 7298 : 2006 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D 5459 : 1995 : R2007 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D 3332 : 1999 : R2010 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 5077 : 1990 : R2015 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D 4504 : 1994 : R2005 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM D 3715/D3715M : 1998 : R2011 Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
ASTM D 5264 : 1998 : R2004 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM D 3889/D3889M : 1996 : R2012 Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
ASTM F 2391 : 2005 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM D 999 : 2008 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D 5570 : 1994 : R1999 Standard Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure
ASTM D 5416 : 1995 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D 3611 : 2006 : R2011 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D 4577 : 2005 : R2018 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D 6123/D6123M : 1997 : R2012 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM D 5748 : 1995 : R2012 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D 5748 : 1995 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D 4003 : 1998 : R2015 TEST METHODS FOR PROGRAMMABLE HORIZONTAL IMPACT TEST FOR SHIPPING CONTAINERS AND SYSTEMS
ASTM D 999 : 2008 : R2015 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D 4649 : 2003 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D 3069 : 1994 : R2005 Standard Test Method for Delivery Rate of Aerosol Products
ASTM A 700 : 2014 Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
ASTM D 3084 :2005 Standard Practice for Alpha-Particle Spectrometry of Water
ASTM D 5330/D5330M : 2006 : R2012 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
MIL-V-3 Revision E:1994 VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF
ASTM D 3811/D3811M : 1996 : R2011 Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D 3833/D3833M : 1996 : R2011 Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
ASTM D 4649 : 2003 : R2009 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D 3482 : 2007 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
MIL-STD-3010 Revision B:2008 Test Procedures for Packaging Materials and Containers
ASTM F 2825 : 2018 : REDLINE Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
ASTM D 6123/D6123M : 1997 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM D 3330/D3330M : 2004 : R2010 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D 6123/D6123M : 1997 : R2003 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM D 6788 : 2002 : R2007 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 3889/D3889M : 1996 : R2006 Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
MIL-STD-3028 Base Document:2009 JOINT MODULAR INTERMODAL CONTAINER
ASTM D 6252/D6252M : 1998 : R2019 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D 4041 : 2005 Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
ASTM D 4727/D4727M : 2017 : REDLINE Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
ASTM D 6344 : 2004 : R2017 Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D 3759/D3759M : 2005 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D 3069 : 1994 : R2013 Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022)
ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM D 4279 : 1995 : R2009 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM D 4279 : 1995 : R2017 Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
ASTM D 3087 : 1991 : R2004 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM F 2227 : 2013 : REDLINE Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO<sub>2</sub> Tracer Gas Method
ASTM D 6295/D6295M : 1998 : R2004 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
MIL-HDBK-774 Revision A:2004 PALLETIZED UNIT LOADS
ASTM D 2658 : 2004 : R2009 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ASTM D 5639/D5639M :2011 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D 5458 : 1995 : R2001 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D 7860 : 2014 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
ASTM D 5375/D5375M : 1998 : R2011 Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM D 4991 : 2007 : R2015 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D 5458 : 1995 : R2007 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D 5415 : 1995 : R2012 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
ASTM D 5445 : 2015 : REDLINE Standard Practice for Pictorial Markings for Handling of Goods
ASTM D 5415 : 1995 : R2007 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
ASTM D 4168 : 1995 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM D 3816/D3816M : 1996 : R2012 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D 4168 : 1995 : R2015 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM D 5375/D5375M : 1998 Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM D 1968 : 2015 Standard Terminology Relating to Paper and Paper Products
ASTM D 5570/D5570M : 2010 : R2015 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
ASTM D 6573/D6573M : 2013 : REDLINE Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM D 3087 : 1991 : R2009 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM D 3950 : 2017 : REDLINE Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM F 3169 : 2016 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
ASTM D 5094/D5094M : 2009 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D 5331 : 2003 : R2009 : EDT 1 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM D 5094/D5094M : 2009 : R2014 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures (Withdrawn 2023)
ASTM D 5415 : 1995 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
ASTM D 3079 : 1994 : R1999 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM D 3103 : 2014 : REDLINE Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D 5077 : 1990 : R2003 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D 5414 : 1995 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
ASTM D 4041/D4041M : 2005 : R2010 : EDT 1 Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
ASTM D 6254/D6254M : 2013 : REDLINE Standard Specification for Wirebound Pallet-Type Wood Boxes
ASTM D 7298 : 2006 : R2017 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D 4775/D4775M : 2009 : R2014 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) (Withdrawn 2022)
GOST 849:2018 Primary nickel. SpecificationsE
ASTM D 998 : 1994 Standard Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers (Withdrawn 1999)
ASTM D 6804 : 2002 : R2007 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D 2063/D2063M : 2010 : R2018 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
ASTM D 1974 : 1998 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
MIL-STD-648 Revision E:2016 Specialized Shipping Containers
ASTM D 5663 : 2015 : REDLINE Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
ASTM D 1185 : 1998 : REV A : R2009 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D 7386 : 2016 : REDLINE Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
ASTM D 3811/D3811M : 1996 : R2006 Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D 3811/D3811M : 1996 : R2001 Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D 4728 : 2017 : REDLINE Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D 4168 : 1995 : R2008 : EDT 1 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM D 5276 : 1998 : R2004 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D 3652M : 1993 Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998)
ASTM D 3611 : 2006 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D 5570/D5570M : 2010 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
ASTM D 2658 : 2004 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
MIL-STD-129-2 Base Document:1993 MARKING FOR SHIPMENT & STORAGE - MEDICAL MATERIAL
ASTM D 3759/D3759M : 2005 : R2011 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM D 5112 : 1998 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D 4919 : 2017 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
ASTM D 4577 : 2005 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D 5276 : 1998 : R2017 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D 880 : 1992 : R1997 Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 7435 : 2008 : R2014 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers (Withdrawn 2018)
ASTM D 7580/D7580M : 2009 Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads
ASTM D 5414 : 1995 : R2007 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
ASTM D 3816/D3816M : 1996 : R2007 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D 5486/D5486M : 2006 : R2012 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM D 6055 : 1996 : R2014 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 3816/D3816M : 1996 : R2003 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D 3076 : 2000 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 7030 : 2004 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D 6295/D6295M : 1998 : R2011 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D 5277 : 1992 : R2002 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D 3580 : 1995 : R2010 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D 6055 : 1996 : R2007 : EDT 1 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D 6880/D6880M : 2011 : REDLINE Standard Specification for Wood Boxes
ASTM D 5277 : 1992 : R1997 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D 6252/D6252M : 1998 Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&#176 Angle
ASTM D 5414 : 1995 : R2012 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
ASTM D 3022 : 1984 : R1996 : EDT 1 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
ASTM D 4041/D4041M : 2005 : R2017 Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
ASTM D 4003 : 1998 : R2003 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 5265 : 2009 : R2016 Standard Test Method for Bridge Impact Testing
ASTM D 6344 : 2004 Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D 4003 : 1998 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM D 5077 : 1990 : R1997 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D 6251/D6251M : 2011 : REDLINE Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM D 6788 : 2002 : R2017 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 3953 : 2015 : REDLINE Standard Specification for Strapping, Flat Steel and Seals
ASTM F 2228 : 2013 : REDLINE Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO<sub>2</sub> Tracer Gas Method
ASTM F 2391 : 2005 : R2011 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM D 3580 : 1995 : R2015 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D 6256/D6256M : 2016 : REDLINE Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
ASTM D 5639/D5639M : 2011 : R2015 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

ASTM D 1596 : 2014 : REDLINE Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
PPP-F-320 Revision D:1970 FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES
ASTM D 3288 : 2003 Standard Test Methods for Magnet-Wire Enamels
ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.