• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 11 : 2022

Current
Current

The latest, up-to-date edition.

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

19-05-2022

1.1This document specifies the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves. This specification applies to test sieves manufactured with sieve cloth having a nominal aperture size ranging from 125 millimetres (mm) down to 20 micrometres (μm).

1.2Additional reference information can be found in Specifications E161, E323, E2016, and in Test Methods C430 and E2427.

1.3The values stated in SI units shall be considered standard for the dimensions of the sieve cloth openings and the wire diameters used in the sieve cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames, pans, and covers.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 29
DocumentType
Standard
Pages
12
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 2977 : 2022 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D 6935 : 2022 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM D 1508 : 2023 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM E 2543 : 2008 : R2022 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM D 1748 : 2022 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM C 1810/C1810M : 2022 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
ASTM C 183/C183M : 2022 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM D 7486 : 2022 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E 2542 : 2008 : R2022 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM D 968 : 2022 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D 451/D451M : 2017 : R2022 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products
ASTM D 4715 : 1998 : R2022 : EDT 1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D 2331 : 2008 : R2022 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM D 8297/D8297M : 2022 Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
ASTM C 24 : 2009 : R2022 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
ASTM D 8038 : 2016 : R2022 : EDT 1 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
ASTM D 2320 : 1998 : R2022 : EDT 1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D 6934 : 2022 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 7655/D7655M : 2012 : R2022 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
ASTM C 1065 : 2008 : R2022 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
ASTM C 1260 : 2022 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM D 5600 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7724 : 2018 : R2023 : EDT 1 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D 5106 : 2022 Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures
ASTM D 934 : 2022 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D 8493 : 2023 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
ASTM D 5709 : 2022 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D 2862 : 2016 : R2022 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM C 1093 : 2022 : REV A Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM D 8200 : 2022 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM C 1387 : 2023 Standard Guide for the Determination of Technetium-99 in Soil
ASTM C 1098 : 2008 : R2022 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
ASTM D 6374 : 2022 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
ASTM A 504/A504M : 2018 : R2023 Standard Specification for Wrought Carbon Steel Wheels
ASTM D 1139/D1139M : 2022 Standard Specification for Aggregate for Single or Multiple Asphalt Surface Treatments
ASTM D 7560 : 2022 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
ASTM D 7367/D7367M : 2022 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D 7226 : 2013 : R2023 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D 4350 : 2016 : R2022 Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM D 5158 : 2023 Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
ASTM C 737 : 2022 Standard Specification for Limestone for Dusting of Coal Mines
ASTM D 6791 : 2022 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM E 324 : 2023 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM C 939/C939M : 2022 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C 1567 : 2022 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM B 214 : 2022 Standard Test Method for Sieve Analysis of Metal Powders
ASTM D 8 : 2022 : REV A Standard Terminology Relating to Materials for Roads and Pavements
ASTM D 452/D452M : 2019 : R2022 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D 2844/D2844M : 2018 : EDT 1 Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils
ASTM D 4381 : 2022 Standard Test Method for Sand Content by Volume of Construction Slurries
ASTM F 2363/F2363M : 2017 : R2023 Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ASTM D 1914 : 1995 : R2022 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D 8135 : 2017 : R2023 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM D 5444 : 2023 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM A 635/A635M : 2022 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM C 225 : 1985 : R2022 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 2419 : 2022 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM D 1511 : 2012 : R2023 Standard Test Method for Carbon Black—Pellet Size Distribution
ASTM D 8490 : 2023 Standard Test Method for Determining the Opening Size of Circular Knit Geotextiles Using an Optical Method
ASTM D 2171/D2171M : 2022 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 4513 : 2022 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D 7428 : 2015 : R2023 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM E 1520 : 2023 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D 1514 : 2023 Standard Test Method for Carbon Black—Sieve Residue
ASTM D 7521 : 2022 Standard Test Method for Determination of Asbestos in Soil
ASTM F 735 : 2022 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM D 448 : 2012 : R2022 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D 8438/D8438M : 2023 Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples
ASTM C 371 : 2009 : R2018 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM C 374 : 2014 : R2018 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C 492 : 1992 : R2017 : EDT 1 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D 1508 : 2012 : R2017 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D 1511 : 2012 : R2017 Standard Test Method for Carbon Black—Pellet Size Distribution
ASTM D 1739 : 1998 : R2017 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D 1748 : 2010 : R2015 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM D 1865/D1865M : 2009 : R2017 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
ASTM D 1914 : 1995 : R2014 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D 2320 : 1998 : R2017 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D 2331 : 2008 : R2013 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM D 244 : 2009 : R2017 Standard Test Methods and Practices for Emulsified Asphalts
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 4072 : 1998 : R2018 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D 448 : 2012 : R2017 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D 4513 : 2011 : R2017 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D 4616 : 1995 : R2018 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D 4715 : 1998 : R2017 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D 4930 : 2006 : R2017 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM D 4931 : 2006 : R2017 Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D 5004 : 2011 : R2017 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D 502 : 1989 : R2016 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D 5493 : 2006 : R2016 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 5821 : 2013 : R2017 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D 6376 : 2010 : R2017 : EDT 1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
ASTM D 6390 : 2011 : R2017 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D 6934 : 2008 : R2016 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 7226 : 2013 : R2017 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D 7655/D7655M : 2012 : R2017 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
ASTM E 1520 : 1999 : R2015 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E 2542 : 2008 : R2014 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM E 2543 : 2008 : R2014 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM E 956 : 1983 : R2015 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM F 106 : 2012 : R2017 Standard Specification for Brazing Filler Metals for Electron Devices (Withdrawn 2024)
ASTM F 1284 : 2009 : R2016 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM F 1632 : 2003 : R2018 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM C 29/C29M : 2017 : REV A Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
ASTM D 1556/D1556M : 2015 : EDT 1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)
ASTM D 2488 : 2017 : EDT 1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
ASTM D 2978 : 2015 : EDT 1 Standard Test Methods for Volume of Processed Peat Materials
ASTM D 2980 : 2017 : EDT 1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
ASTM D 4318 : 2017 : EDT 1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D 3744/D3744M : 2018 Standard Test Method for Aggregate Durability Index
ASTM E 2427 : 2018 Standard Test Method for Acceptance by Performance Testing for Sieves
ASTM F 608 : 2018 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
ASTM C 233/C233M : 2018 Standard Test Method for Air-Entraining Admixtures for Concrete
ASTM E 2397/E2397M : 2019 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
ASTM D 5341/D5341M : 2019 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM C 5 : 2018 Standard Specification for Quicklime for Structural Purposes
ASTM D 4895 : 2018 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM E 1638 : 2018 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM D 2171/D2171M : 2018 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM E 2651 : 2019 Standard Guide for Powder Particle Size Analysis
ASTM D 7496 : 2018 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
ASTM F 1580 : 2018 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM C 1463 : 2019 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
ASTM E 2399/E2399M : 2019 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
ASTM D 6276 : 2019 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D 4792/D4792M : 2013 : R2019 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
ASTM E 1757 : 2019 Standard Practice for Preparation of Biomass for Compositional Analysis
ASTM D 50 : 1990 : R2019 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
ASTM C 1746/C1746M : 2019 Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
ASTM D 185 : 2007 : R2019 Standard Test Methods for Coarse Particles in Pigments
ASTM D 126 : 1987 : R2019 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM D 716 : 1986 : R2019 Standard Test Methods for Evaluating Mica Pigment
ASTM D 4894 : 2019 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D 4892 : 2014 : R2019 : EDT 1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C 566 : 2019 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
ASTM D 7481 : 2018 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D 452/D452M : 2019 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D 5158 : 1998 : R2019 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM D 7367 : 2019 : EDT 2 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM A 99 : 2003 : R2019 Standard Specification for Ferromanganese
ASTM C 35 : 2001(R2019) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
ASTM D 4791 : 2019 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM A 132 : 2004 : R2019 Standard Specification for Ferromolybdenum
ASTM A 610 : 1979(R2019) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D 494 : 2011(R2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
ASTM E 2316 : 2014 : R2019 : EDT 1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D 4253 : 2016 : EDT 1 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 6998 : 2019 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D 7454 : 2019 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM C 295/C295M : 2019 Standard Guide for Petrographic Examination of Aggregates for Concrete
ASTM C 400 : 2019 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
ASTM D 197 : 2019 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM D 441 : 2007 : R2019 : EDT 1 Standard Test Method of Tumbler Test for Coal
ASTM D 6926 : 2020 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM C 1084 : 2019 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
ASTM D 440 : 2007 : R2019 : EDT 1 Standard Test Method of Drop Shatter Test for Coal
ASTM D 4749/D4749M : 1987 : R2019 : EDT 1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D 8097 : 2017:EDT 1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D 3977 : 1997 : R2019 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM C 136/C136M : 2019 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM F 104 : 2011 : R2020 Standard Classification System for Nonmetallic Gasket Materials
ASTM D 6155 : 2019 Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures
ASTM A 601/A601M : 2010 : R2020 Standard Specification for Electrolytic Manganese Metal
ASTM A 568/A568M : 2019 : REV A Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 481 : 2005 : R2020 Standard Specification for Chromium Metal
ASTM A 483/A483M : 2010 : R2020 Standard Specification for Silicomanganese
ASTM A 835/A835M : 2010 : R2020 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM C 784 : 2020 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
ASTM A 922 : 2005 : R2020 Standard Specification for Silicon Metal
ASTM C 1891 : 2020 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM D 7626 : 2019 : EDT 1 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM F 2107 : 2008 : R2020 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
ASTM C 1170/C1170M : 2020 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM D 4312 : 2020 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
ASTM D 2415 : 2020 Standard Test Method for Ash in Coal Tar and Pitch
ASTM D 2416 : 2020 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
ASTM D 269 : 1997 : R2020 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D 1742 : 2020 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 4893 : 2020 Standard Test Method for Determination of Pitch Volatility
ASTM C 602 : 2020 Standard Specification for Agricultural Liming Materials
ASTM D 718 : 1986 : R2020 Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM D 444 : 1988 : R2020 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM D 1135 : 1986 : R2020 Standard Test Methods for Chemical Analysis of Blue Pigments
ASTM D 480 : 1988 : R2020 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D 1155 : 2010 : R2020 Standard Test Method for Roundness of Glass Spheres
ASTM D 1214 : 2010 : R2020 Standard Test Method for Sieve Analysis of Glass Spheres
ASTM D 4746 : 2020 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
ASTM C 472 : 2020 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
ASTM D 1997 : 2020 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
ASTM C 131/C131M : 2020 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D 7280 : 2020 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ASTM D 2318 : 2020 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
ASTM C 1777 : 2020 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
ASTM D 3280 : 1985 : R2020 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 2764 : 2020 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM D 1278 : 1991 : REV A : R2020 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 5080 : 2020 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D 1301 : 1991 : R2020 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM C 28/C28M : 2010 : R2020 Standard Specification for Gypsum Plasters
ASTM C 61/C61M : 2000 : R2020 Standard Specification for Gypsum Keene's Cement
ASTM C 780 : 2020 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
ASTM D 2067 : 1997 : R2020 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D 1665 : 2020 Standard Test Method for Engler Specific Viscosity of Tar Products (Withdrawn 2023)
ASTM B 329 : 2020 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM D 7382 : 2020 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
ASTM D 1632 : 2017 : EDT 1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D 2487 : 2017 : EDT 1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM C 781 : 2020 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
ASTM E 1706 : 2020 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM F 1815 : 2011 : R2018 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
ASTM D 3466 : 2006 : R2018 Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D 7084 : 2018 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM C 1218/C1218M : 2020 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM D 3038 : 1993 : R2018 Standard Test Method for Drop Shatter Test for Coke
ASTM D 5644 : 2018 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 293/D293M : 2018 Standard Test Method for the Sieve Analysis of Coke
ASTM C 604 : 2018 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D 1863/D1863M : 2005 : R2018 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
ASTM C 888 : 2018 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder
ASTM C 750 : 2018 Standard Specification for Nuclear-Grade Boron Carbide Powder
ASTM C 33/C33M : 2018 Standard Specification for Concrete Aggregates
ASTM D 1921 : 2018 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D 1319 : 2020 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM C 59/C59M : 2000 : R2020 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM D 6997 : 2012 : R2020 Standard Test Method for Distillation of Emulsified Asphalt
ASTM C 1152/C1152M : 2020 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM E 728 : 1991 : R2020 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM C 329 : 1988 : R2020 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM B 851 : 2004 : R2020 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
ASTM C 285 : 2010 : R2020 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM D 1514 : 2015 : R2020 Standard Test Method for Carbon Black—Sieve Residue
ASTM D 632 : 2012 : R2020 : EDT 1 Standard Specification for Sodium Chloride
ASTM G 105 : 2020 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM F 2075 : 2020 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
ASTM D 8378/D8378M : 2021 Standard Test Method for Potential Expansion of Steel Slag from Hydration Reactions by Autoclave
ASTM D 1370/D1370M : 2012 : R2021 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D 2638 : 2021 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D 4829 : 2021 Standard Test Method for Expansion Index of Soils
ASTM C 1318 : 2015 : REV A : R2020 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 1524 : 2020 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
ASTM C 1176/C1176M : 2020 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM F 2953 : 2012 : R2021 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM A 482/A482M : 2011 : R2021 Standard Specification for Ferrochrome-Silicon
ASTM A 550 : 2016 : R2021 Standard Specification for Ferrocolumbium (Ferroniobium)
ASTM D 3147 : 2021 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
ASTM C 1260 : 2021 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM E 102/E102M : 1993 : R2021 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM C 471M : 2020 : REV A : EDT 1 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
ASTM F 1864 : 2021 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM C 1567 : 2021 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM D 8281/D8281M : 2021 Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol
ASTM D 6393/D6393M : 2021 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM E 32 : 2021 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM D 6572 : 2021 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
ASTM D 4607 : 2014 : R2021 Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM C 1810/C1810M : 2021 : REV A Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
ASTM D 5030/D5030M : 2021 Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit
ASTM D 7928 : 2021 : EDT 1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D 5159 : 2021 Standard Guide for Dusting Attrition of Granular Activated Carbon
ASTM D 4373 : 2021 Standard Test Method for Rapid Determination of Carbonate Content of Soils
ASTM D 7560 : 2016 : EDT 1 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
ASTM D 698 : 2012 : R2021 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM C 146 : 2021 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM C 429 : 2021 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
ASTM D 1557 : 2012 : R2021 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM F 1953 : 2010 : R2018 Standard Guide for Construction and Maintenance of Grass Tennis Courts
ASTM D 7724 : 2018 : EDT 1 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D 2797/D2797M : 2021 : REV A Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D 4751 : 2021 : REV A Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM A 635/A635M : 2015 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A 749/A749M : 2014 : R2021 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM D 1140 : 2017 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 2774 : 2021 : REV A Standard Practice for Underground Installation of Thermoplastic Pressure Piping
ASTM E 726 : 2001 : R2021 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E 161 : 2017 : R2021 Standard Specification for Electroformed Material and Test Sieves
ASTM E 323 : 2011 : R2021 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E 389 : 2021 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D 4326 : 2021 Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
ASTM F 3091/F3091M : 2014 : R2021 Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM C 753 : 2016 : REV A : R2021 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
ASTM F 3001 : 2014 : R2021 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM F 3056 : 2014 : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 3055 : 2014 : REV A : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM D 1241 : 2015 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024)
ASTM F 2924 : 2014 : R2021 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 1275 : 2015 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
ASTM D 6084/D6084M : 2021 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
ASTM D 4572 : 2021 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
ASTM D 4315 : 2021 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 1883 : 2021 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM E 276 : 2021 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No. 4) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM D 6092 : 2021 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
ASTM F 1377 : 2021 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
ASTM D 2013/D2013M : 2021 Standard Practice for Preparing Coal Samples for Analysis
ASTM D 4570 : 2002 : R2021 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 5230 : 2021 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
ASTM D 4026 : 2006 : R2021 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM C 232/C232M : 2021 Standard Test Method for Bleeding of Concrete
ASTM D 2332 : 2013 : R2021 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM C 778 : 2021 Standard Specification for Standard Sand
ASTM G 65 : 2016 : R2021 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM D 5581 : 2007 : REV A : R2021 : EDT 1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)
ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM D 297 : 2021 Standard Test Methods for Rubber Products—Chemical Analysis
ASTM D 7608 : 2018 : EDT 1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM D 6467 : 2021 : EDT 1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
ASTM B 611 : 2021 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
ASTM F 3012 : 2022 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM C 1093 : 2022 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 135 : 1996 : R2022 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C 325 : 2007 : R2022 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
ASTM C 311/C311M : 2022 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM C 1843 : 2016 : R2022 Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate
ASTM D 2187 : 2017 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
ASTM C 157/C157M : 2017 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C 403/C403M : 2016 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM D 8262 : 2022 Standard Test Method for Determining the pH of Granular Material for Use in Embankments, Subgrades, and Retaining Wall Backfil
ASTM E 2016 : 2022 Standard Specification for Industrial Woven Wire Cloth
ASTM E 2814 : 2022 Standard Specification for Industrial Woven Wire Filter Cloth
ASTM D 8 : 2022 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D 2489/D2489M : 2016 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
ASTM D 2419 : 2014 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM C 92 : 1995 : R2022 : EDT 1 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM D 6933 : 2022 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D 2862 : 2016 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D 2977 : 2014 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D 3042 : 2017 Standard Test Method for Insoluble Residue in Carbonate Aggregates
ASTM B 214 : 2016 Standard Test Method for Sieve Analysis of Metal Powders
ASTM D 3282 : 2015 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM F 1877 : 2016 Standard Practice for Characterization of Particles
ASTM D 3802 : 2016 Standard Test Method for Ball-Pan Hardness of Activated Carbon
ASTM C 117 : 2017 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
ASTM C 127 : 2015 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024)
ASTM C 279 : 2017 Standard Specification for Chemical-Resistant Masonry Units
ASTM D 4254 : 2016 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM C 332 : 2017 Standard Specification for Lightweight Aggregates for Insulating Concrete
ASTM D 4292 : 2017 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
ASTM D 4350 : 2016 Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM C 430 : 2017 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM D 409/D409M : 2016 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM C 535 : 2016 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C 641 : 2017 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
ASTM C 708 : 2016 Standard Specification for Nuclear-Grade Beryllium Oxide Powder
ASTM D 4643 : 2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
ASTM D 4644 : 2016 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
ASTM D 4646 : 2016 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM C 831 : 2018 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C 980 : 2017 Standard Specification for Industrial Chimney Lining Brick
ASTM C 999 : 2017 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
ASTM D 4944 : 2018 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D 4959 : 2016 Standard Test Method for Determination of Water Content of Soil By Direct Heating
ASTM D 113 : 2017 Standard Test Method for Ductility of Asphalt Materials
ASTM D 5106 : 2015 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
ASTM D 425 : 2017 Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D 5444 : 2015 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM D 546 : 2017 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
ASTM D 5519 : 2015 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024)
ASTM D 5600 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 968 : 2017 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM E 324 : 2016 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E 359 : 2017 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
ASTM D 6928 : 2017 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D 6935 : 2017 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM D 6936 : 2017 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D 7428 : 2015 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D 7486 : 2014 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C 1077 : 2017 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1387 : 2014 Standard Guide for the Determination of Technetium-99 in Soil
ASTM C 1436 : 2013 Standard Specification for Materials for Shotcrete (Withdrawn 2022)
ASTM D 3402/D3402M : 2016 Standard Test Method for Tumbler Test for Coke
ASTM D 1139/D1139M : 2015 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
ASTM D 3997/D3997M : 2016 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM C 786/C786M : 2017 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
ASTM C 172/C172M : 2017 Standard Practice for Sampling Freshly Mixed Concrete
ASTM C 87/C87M : 2017 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C 331/C331M : 2017 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
ASTM C 142/C142M : 2017 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM C 123/C123M : 2014 Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023)
ASTM C 702/C702M : 2018 Standard Practice for Reducing Samples of Aggregate to Testing Size
ASTM C 441/C441M : 2017 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
ASTM F 2363/F2363M : 2017 Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ASTM C 1761/C1761M : 2017 Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
ASTM D 7521 : 2016 Standard Test Method for Determination of Asbestos in Soil
ASTM D 2844/D2844M : 2018 Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils
ASTM D 451/D451M : 2017 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D 5514/D5514M : 2018 Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM C 183/C183M : 2016 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM D 560/D560M : 2016 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
ASTM D 559/D559M : 2015 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
ASTM D 4718/D4718M : 2015 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 4914/D4914M : 2016 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM C 1090/C1090M : 2015 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
ASTM C 939/C939M : 2016 : REV A Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C 1797 : 2017 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM F 3187 : 2016 Standard Guide for Directed Energy Deposition of Metals
ASTM D 5092/D5092M : 2016 Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D 8038 : 2016 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
ASTM D 6913/D6913M : 2017 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 8106 : 2017 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
ASTM D 8135 : 2017 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM A 504/A504M : 2018 Standard Specification for Wrought Carbon Steel Wheels
ASTM D 8198 : 2018 Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches
ASTM D 8012 : 2018 Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications
ASTM D 4943 : 2018 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
ASTM D 6647 : 2018 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
ASTM C 88/C88M : 2018 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
ASTM A 100 : 2007 : R2018 Standard Specification for Ferrosilicon
ASTM C 1065 : 2008 : R2015 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
ASTM C 1098 : 2008 : R2015 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
ASTM C 1335 : 2012 : R2017 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM C 225 : 1985 : R2014 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM C 24 : 2009 : R2018 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
ASTM C 323 : 1956 : R2016 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
ASTM D 5449/D5449M : 2022 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM C 357 : 2007 : R2022 : EDT 1 Standard Test Method for Bulk Density of Granular Refractory Materials
SSPC-AB 3:2017(R2023) Ferrous Metallic Abrasive

ASTM E 1638 : 2022 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM E 1638 : 2018 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM E 2427 : 2018 Standard Test Method for Acceptance by Performance Testing for Sieves
ASTM E 2427 : 2022 Standard Test Method for Acceptance by Performance Testing for Test Sieves

View more information
£57.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.