• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 2570/E2570M : 2007 : R2019

Current
Current

The latest, up-to-date edition.

Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-04-2019

CONTAINED IN VOL. 04.12, 2014 Pertains to trowel, roller, or spray applied Water-resistive barrier (WRB) coatings that are applied over exterior sheathing prior to application of EIFS or EIFS with drainage wall claddings.

1.1These test methods apply to trowel, roller, or spray applied Water-resistive barrier (WRB) coatings that are applied over exterior sheathing prior to application of EIFS or EIFS with drainage wall claddings.

1.2Test methods for in place wall system and cladding related to tests such as fire resistance, wind load capability, air barrier performance, and so forth. should also be considered but are outside the scope of this document.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 06
DevelopmentNote
Supersedes ASTM E 2570. (09/2014)
DocumentType
Test Method
Pages
5
ProductNote
THIS STANDARD ALSO REFERS TO AATCC 127
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 2813 : 2018 Standard Practice for Building Enclosure Commissioning

ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
ASTM E 631 : 2015 : REDLINE Standard Terminology of Building Constructions
ASTM D 2898 : 2008 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D 2247 : 2010 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 2898 : 1994 : R1999 Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM E 1233/E1233M : 2014 : REDLINE Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
ASTM E 2110 : 2003 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 2247 : 2011 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 2247 : 2002 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM E 72 : 2015 : REDLINE Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E 96/E96M : 2023 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 2247 : 1992 Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity
ASTM C 297/C297M : 2016 : REDLINE Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM E 96/E96M : 2024 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 2247 : 2015 Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM E 2110 : 2017 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E 330/E330M : 2014 : R2021 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E 2110 : 2009 : EDT 1 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E 331 : 2000 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM E 72 : 2015 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM D 2898 : 2007 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D 2247 : 2015(R2020) Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 2898 : 1994 : R2004 Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D 2898 : 1977 Standard Methods for Accelerated Weathering Of Fire-Retardant-Treated Wood For Fire Testing
ASTM D 2898 : 2009 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM E 331 : 2000 : R2023 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E 330/E330M : 2014 : REDLINE Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E 1233/E1233M : 2014 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
ASTM E 2110 : 2011 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E 72 : 2022 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E 331 : 2000 : R2016 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM D 2898 : 2010 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D 2247 : 1968 : R1973 Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity
ASTM D 2898 : 2010 : R2017 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM E 2110 : 2000 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM D 2247 : 1999 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM E 2110 : 2017 : REDLINE Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E 330/E330M : 2014 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E 1233/E1233M : 2014 : R2021 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.