• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 6 : 2015 : EDT 3

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology Relating to Methods of Mechanical Testing

Available format(s)

Hardcopy , PDF

Superseded date

24-05-2021

Language(s)

English

Published date

27-05-2020

1.1This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications.

1.2Terms relating to fatigue and fracture testing are defined in Terminology E1823.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 28
DocumentType
Reference Material
Pages
13
ProductNote
ε3NOTE—Editorial changes were made throughout in May 2020
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
ASTM D 7205/D7205M : 2006 : R2016 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1869 : 2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E 837 : 2020 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM E 209 : 2018 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM C 1836 : 2016 Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
ASTM E 4 : 2020 Standard Practices for Force Verification of Testing Machines<br>
ASTM D 3930 : 2008 : R2015 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 292 : 2018 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM F 19 : 2021 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals (Withdrawn 2023)
ASTM B 820 : 2018 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM C 565 : 2015 : R2021 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D 7565/D7565M : 2010 : R2017 Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM E 1922 : 2004 : R2015 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM D 5824 : 1998 : R2017 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 6416/D6416M : 2016 : EDT 1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM B 648 : 2010 : R2015 : EDT 1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM F 1624 : 2012 : R2018 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM E 1237 : 2020 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E 1561 : 2020 Standard Practice for Analysis of Strain Gage Rosette Data
ASTM E 633 : 2021 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing
ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM E 468 : 2018 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM C 1835 : 2016 Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
ASTM E 2954 : 2015 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM D 4255/D4255M : 2020 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 7615/D7615M : 2019 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM E 143 : 2020 Standard Test Method for Shear Modulus at Room Temperature
ASTM F 2789 : 2010 : R2020 Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
ASTM B 769 : 2011 : R2016 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM D 7846 : 2016 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
ASTM E 1949 : 2021 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM C 1337 : 2017 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D 8069 : 2017 : REV A Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM C 1366 : 2019 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM C 1683 : 2010 : R2019 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
ASTM B 647 : 2010 : R2016 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D 4761 : 2019 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM E 9 : 2019 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM G 129 : 2000 : R2013 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
ASTM D 7766/D7766M : 2016 Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM D 5766/D5766M : 2011 : R2018 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM C 773 : 1988 : R2020 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM E 1876 : 2015 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 83 : 2016 Standard Practice for Verification and Classification of Extensometer Systems
ASTM C 394/C394M : 2016 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM F 2078 : 2015 Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM D 6415/D6415M : 2006 : REV A : R2013 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C 1793 : 2015 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
ASTM D 4896 : 2001 : R2016 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM C 1292 : 2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM F 543 : 2017 Standard Specification and Test Methods for Metallic Medical Bone Screws
ASTM C 1469 : 2010 : R2015 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM A 931 : 2018 Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM D 4092 : 2007 : R2013 Standard Terminology for Plastics: Dynamic Mechanical Properties
ASTM B 831 : 2019 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM C 1198 : 2020 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
ASTM D 5379/D5379M : 2019 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM C 469/C469M : 2014 : EDT 1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D 5751 : 1999 : R2019 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM C 1341 : 2013 : R2018 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM E 467 : 2021 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM D 3518/D3518M : 2018 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
ASTM C 749 : 2015 : R2020 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM F 2842 : 2020 Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM D 6264/D6264M : 2017 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM E 238 : 2017 : REV A Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM D 1676 : 2017 Standard Test Methods for Film-Insulated Magnet Wire
ASTM D 953 : 2019 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM E 1319 : 2021 Standard Guide for High-Temperature Static Strain Measurement
ASTM D 7958/D7958M : 2017 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
ASTM D 8066/D8066M : 2017 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
ASTM D 6873/D6873M : 2019 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM D 5572 : 1995 : R2019 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM E 915 : 2019 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM A 938 : 2018 Standard Test Method for Torsion Testing of Wire
ASTM C 1576 : 2005 : R2017 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM E 1426 : 2014 : R2019 : EDT 1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM C 1465 : 2008 : R2019 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM E 855 : 2021 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM F 1717 : 2021 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM E 290 : 2014 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D 3983 : 1998 : R2019 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM A 135/A135M : 2021 Standard Specification for Electric-Resistance-Welded Steel Pipe
ASTM E 1928 : 2013 : R2019 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
ASTM C 1862 : 2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM C 1273 : 2018 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM E 647 : 2015 : EDT 1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 251 : 2020 : REV A Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM C 140/C140M : 2020 : REV A Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C 1360 : 2017 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D 7914/D7914M : 2021 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM E 2624 : 2017 Standard Practice for Torque Calibration of Testing Machines
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM F 1160 : 2014 : R2017 : EDT 1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM C 1425 : 2019 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
ASTM C 1819 : 2015 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 7337/D7337M : 2012 : R2019 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM C 1323 : 2016 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM C 273/C273M : 2020 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM E 1875 : 2020 : REV A Standard Test Method for Dynamic Young&apos;s Modulus, Shear Modulus, and Poisson&apos;s Ratio by Sonic Resonance
ASTM E 328 : 2021 Standard Test Methods for Stress Relaxation for Materials and Structures
ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM C 363/C363M : 2016 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM D 6641/D6641M : 2016 : EDT 2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM F 3036 : 2013 Standard Guide for Testing Absorbable Stents
ASTM D 7137/D7137M : 2017 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D 6742/D6742M : 2017 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM C 78/C78M : 2021 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D 7336/D7336M : 2016 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM E 3246 : 2021 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM F 2077 : 2018 Test Methods For Intervertebral Body Fusion Devices
ASTM B 565 : 2020 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM C 1773 : 2017 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D 7913/D7913M : 2014 : R2020 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM C 1259 : 2015 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM D 2095 : 1996 : R2015 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM F 2193 : 2020 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM A 1084 : 2015 : REV A Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM D 7332/D7332M : 2016 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
ASTM D 7616/D7616M : 2011 : R2017 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM C 1424 : 2015 : R2019 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C 1499 : 2019 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D 7250/D7250M : 2020 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM C 1863 : 2018 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM D 198 : 2015 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM C 1358 : 2018 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
ASTM C 1557 : 2020 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
ASTM E 2207 : 2015 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM E 2899 : 2019 : EDT 1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM C 393/C393M : 2020 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E 2860 : 2020 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM D 7956/D7956M : 2016 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
ASTM D 7522/D7522M : 2021 Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates
ASTM D 907 : 2015 Standard Terminology of Adhesives
ASTM C 480/C480M : 2016 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM D 5448/D5448M : 2016 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM C 1783 : 2015 Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
ASTM D 7705/D7705M : 2012 : R2019 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM D 7469 : 2016 Standard Test Methods for End-Joints in Structural Wood Products
ASTM E 2448 : 2018 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM D 8131/D8131M : 2017 : EDT 1 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM F 1147 : 2005 : R2017 : EDT 1 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM E 132 : 2017 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM F 1044 : 2005 : R2017 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F 2790 : 2010 : R2019 : EDT 1 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM F 2516 : 2018 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM C 1674 : 2016 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM E 1823 : 2020 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM E 92 : 2017 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM C 1368 : 2018 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
ASTM E 345 : 2016 Standard Test Methods of Tension Testing of Metallic Foil
ASTM D 2343 : 2017 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
ASTM E 1685 : 2020 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
ASTM E 1012 : 2019 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 6671/D6671M : 2019 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM E 2218 : 2015 Standard Test Method for Determining Forming Limit Curves
ASTM F 1582 : 1998 : R2016 Standard Terminology Relating to Spinal Implants
ASTM C 1525 : 2018 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
ASTM D 8067/D8067M : 2017 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM C 301 : 2018 Standard Test Methods for Vitrified Clay Pipe
ASTM B 950 : 2021 : EDT 1 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM E 1856 : 2013 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM D 7249/D7249M : 2020 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM F 2502 : 2017 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
ASTM D 7136/D7136M : 2020 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 2559 : 2012 : REV A : R2018 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM A 994 : 2018 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM D 5262 : 2021 Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
ASTM D 6815 : 2009 : R2015 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM C 1361 : 2010 : R2019 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM D 7617/D7617M : 2011 : R2017 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM C 365/C365M : 2016 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM D 6856/D6856M : 2003 : R2016 Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM E 754 : 1980 : R2014 : EDT 1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM C 1187 : 2020 : REV A Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
ASTM C 67/C67M : 2020 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E 190 : 2014 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM D 2442 : 1975 : R2020 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
ASTM D 7078/D7078M : 2020 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM F 2346 : 2018 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 604 : 2018 Standard Test Method for Dynamic Tear Testing of Metallic Materials
ASTM D 5592 : 1994 : R2018 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 7264/D7264M : 2021 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D 7290 : 2006 : R2017 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials

View more information
£70.87
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.