• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM G 154 : 2016 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
Available format(s)

PDF

Superseded date

03-02-2023

Language(s)

English

Published date

20-09-2016

CONTAINED IN VOL. 14.04, 2016 Specifies specific exposure conditions for an application along with a means to evaluate changes in material properties.

1.1This practice is limited to the basic principles for operating a fluorescent UV lamp and water apparatus; on its own, it does not deliver a specific result.

1.2It is intended to be used in conjunction with a practice or method that defines specific exposure conditions for an application along with a means to evaluate changes in material properties. This practice is intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure.

Note 1:Practice G151 describes general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources.

Note 2:A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested.

1.3Test specimens are exposed to fluorescent UV light under controlled environmental conditions. Different types of fluorescent UV lamp sources are described.

Note 3:In this standard, the terms UV light and UV radiation are used interchangeably.

1.4Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G151 and ISO 4892-1.

Note 4:General information about methods for determining the change in properties after exposure and reporting these results is described in ISO 4582 and Practice D5870.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.7This standard is technically similar to ISO 4892-3 and ISO 16474-3.

Committee
G 03
DevelopmentNote
Supersedes ASTM G 53. (10/2000)
DocumentType
Redline
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 7281 : 2007 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
ASTM D 7311 : 2007 Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane
12/30259268 DC : 0 BS ISO 14186 - AIR CARGO - FIRE CONTAINMENT COVERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
ASTM C 1775 : 2014 : REDLINE Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
ASTM D 7897 : 2015 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM D 4587 : 2011 : REDLINE Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
MIL-PRF-32239 Revision A:2014 COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS
SDI A250.3 : 2007(R2011) TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR - FACTORY APPLIED FINISH COATINGS FOR STEEL DOORS AND FRAMES
ASTM D 4811/D4811M : 2016 : REDLINE Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
TT-P-1952 Revision F:2015 PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE
17/30293011 DC : DRAFT JUL 2017 BS ISO 19881 - GASEOUS HYDROGEN - LAND VEHICLE FUEL CONTAINERS
MIL-PRF-24667 Revision C:2008 COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION
ASTM D 7238 : 2006 : R2017 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
MIL-PRF-24763 Revision B:2009 ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE
FM 2510 : 2014 FLOOD ABATEMENT EQUIPMENT
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
BS ISO 11617:2014 Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
15/30315879 DC : 0 BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
MIL-DTL-85052 Revision B:2005 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
MIL-PRF-22750 Revision G:2011 COATING, EPOXY, HIGH-SOLIDS
ASTM D 4434/D4434M : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM D 3424 : 2011 : REDLINE Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
CSA C867.2 : 2009 : INC : UPD 1 : 2014 : R201400 PERFORMANCE OF DECORATIVE LIGHT STRINGS
CSA C411.4 : 2016 COMPOSITE SUSPENSION INSULATORS FOR OVERHEAD LINES > 75 KV
CSA C411.6 : 2011 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
CSA C867.2 : PERFORMANCE OF DECORATIVE LIGHT STRINGS
ASTM D 6754/D6754M : 2015 : REDLINE Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
CSA C60044-8 : 2007 : R2016 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
SAE AS 6453 : 2013 FIRE CONTAINMENT COVER - DESIGN, PERFORMANCE, AND TESTING REQUIREMENTS
ASTM D 4329 : 2013 : REDLINE Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
I.S. EN 927-6:2006 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
ASTM D 7067 : 2005 Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014)
ASTM D 4674 : 2002 : REV A Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
CSA B837:14 (R2019) Collapsible fabric storage tanks (bladders)
BS EN 927-6:2006 Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
AASHTO MP 22 : 2013 : R2015 SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES
SCTE 77 : 2013 SPECIFICATION FOR UNDERGROUND ENCLOSURE INTEGRITY
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM E 2556/E2556M : 2010 : R2016 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
ASTM E 1795 : 2017 : REDLINE Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 6754 : 2002 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM C 1442 : 2014 : REDLINE Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM D 750 : 2012 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 6662 : 2017 : REDLINE Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
ASTM C 1523 : 2017 : REDLINE Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C 1519 : 2010 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 5894 : 2016 : REDLINE Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM F 2157 : 2009-02 SPECIFICATION FOR SYNTHETIC SURFACED RUNNING TRACKS
ASTM E 1797 : 2012 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM G 160 : 2013-02 PRACTICE FOR EVALUATING MICROBIAL SUSCEPTIBILITY OF NONMETALLIC MATERIALS BY LABORATORY SOIL BURIAL
ASTM C 1248 : 2008 : R2012 Standard Test Method for Staining of Porous Substrate by Joint Sealants
DIN EN ISO 11507:2007-05 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
15/30292344 DC : 0 BS ISO 19281 - AIR CARGO - FIRE RESISTANT CONTAINERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
NACE 02107 : 0 COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT
SAE J 2020 : 2016 ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A FLUORESCENT UV AND CONDENSATION APPARATUS
IPC HDBK 830 : A GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS
NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
16/30328596 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
IEC TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 7-2: Environmental exposures - Accelerated weathering tests of polymeric materials
DD ISO/TS 13434:2008 Geosynthetics. Guidelines for the assessment of durability
I.S. EN ISO 21898:2005 PACKAGING - FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBCS) FOR NON-DANGEROUS GOODS
17/30352673 DC : 0 BS IEC 62788-5-2 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 5-2: EDGE SEALS - EDGE-SEAL DURABILITY EVALUATION GUIDELINE
SSPC-PAINT 38 : 2013 SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED
SSPC-PAINT 45 : 2013 TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED
CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012
ISO 11617:2014 Buildings and civil engineering works Sealants Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
MIL-PRF-32348 Base Document:2010 POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
07/30127278 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
ASTM F 1945 : 2005 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
DD ISO/TS 15869:2009 Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks
ASTM D 4674 : 2002 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
ASTM C 1315 : 2011 : REDLINE Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
BS ISO 9370:2017 Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
CSA C867.2 : 2009 : INC : UPD 1 : 2014 PERFORMANCE OF DECORATIVE LIGHT STRINGS
15/30253325 DC : 0 BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION
ISO 12619-2:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods
FM 4431 : 2006 SKYLIGHTS
ASTM E 2925 : 2017 : REDLINE Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
CSA C411.7 : 2011 : INC : UPD 2 : 2013 COMPOSITE INSULATORS FOR GUY WIRES
SAE AS 85052 : 2015 CLAMP ASSEMBLY, LOOP TYPE, CUSHIONED, GENERAL SPECIFICATION FOR
SAE J 2691 : 2013 15 POLE CONNECTOR BETWEEN TOWING VEHICLES AND TRAILERS WITH 12 VOLT NOMINAL SUPPLY
CSA C60044-8 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
ANSI HGV 2 : 2014 COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS
SAE J 2863 : 2016 AUTOMOTIVE TRAILER TOW CONNECTOR
ANSI PRD 1 : 2013(R2018) PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS
BS ISO 12619-2 : 2014 ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
ASTM C 1423 : 2016 : REDLINE Standard Guide for Selecting Jacketing Materials for Thermal Insulation
SAE J 2633 : 2015 WHEEL AND WHEEL TRIM WEATHERING TESTING FOR PAINT COATINGS
ASTM D 904 : 1999 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ISO 19281:2016 Air cargo Fire resistant containers Design, performance and testing requirements
CSA C310 : 2009 : R2014 DISTRIBUTION CLASS POLYMERIC CUTOUTS
ANSI NGV3.1 : 2014 FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES
ASTM F 790 : 2008 : R2013 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM D 7031 : 2011 : REDLINE GUIDE FOR EVALUATING MECHANICAL AND PHYSICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE PRODUCTS
SSPC-PAINT 36 : 2013 TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED
ASTM D 7238 : 2006 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM G 141 : 2009 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
ISO/TS 15869:2009 Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks
ASTM D 7238 : 2006 : R2012 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM G 178 : 2016 : REDLINE Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM F 2286 : 2016 : REDLINE Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
ASTM D 4799/D4799M : 2017 : REDLINE Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
UNE-EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
I.S. EN ISO 4892-3:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016)
EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
ANSI/NEMA C29.18:2013 American National Standard for Composite Insulators—Distribution Line Post Type
ANSI C136.20 : 1990 ROADWAY AND AREA LIGHTING EQUIPMENT - FIBER-REINFORCED COMPOSITE (FRC) LIGHTING POLES
I.S. EN ISO 11507:2007 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
ASTM D 904 : 1999 : R2013 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D 5208 : 2014 : REDLINE Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
04/102582 DC : 0 ISO 15869-1 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS - PART 1: GENERAL REQUIREMENTS
MIL-DTL-32265 Base Document:2007 Folded Fiberglass Mat Fabrication and Packaging
12/30229888 DC : 0 BS EN ISO 16474-3 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
ASTM F 790 : 2008 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
MIL-PRF-24635 Revision E:2009 COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE
SAE J 3082 : 2015 AUXILIARY TWO CONDUCTOR ELECTRICAL POWER CONNECTOR FOR TRUCK-TRAILER HIGH POWER JUMPER CABLE
CSA C411.6 : 2011 : R2016 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
AASHTO TP 103 : 2013 : R2015 METHOD OF TEST FOR DETECTABLE WARNING SYSTEMS
CSA C60044-8 :2007 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
ANSI/CSA NGV 4.2-2014 (R2019)/CSA 12.52-2014 (R2018) Hoses for natural gas dispensing systems
ASTM G 147 : 2017 : REDLINE Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
SCTE 156 : 2016 SPECIFICATION FOR MAINLINE PLUG (MALE) TO CABLE INTERFACE
IEEE C57.12.35-2013 IEEE Standard Bar Coding for Distribution Transformers and Step-Voltage Regulators
CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
ANSI HPRD 1 : 2013(R 2018) THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS
ASTM G 141 : 2009 : R2013 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM D 904 : 1999 : R2005 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
CAN/CSA-Z662-15 Oil and gas pipeline systems
ANSI HGV 3.1 : 2015 FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES
CSA C310 : 2009 DISTRIBUTION CLASS POLYMERIC CUTOUTS
ASTM D 904 : 1999 : R2008 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM C 1257 : 2015 : REDLINE Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM D 3451 : 2006 Standard Guide for Testing Coating Powders and Powder Coatings
CSA C61869-1 : 2014 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
ASTM G 156 : 2017 : REDLINE Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM E 2556/E2556M : 2010 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 7281 : 2007 : R2013 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
BS EN ISO 4892-3:2016 Plastics. Methods of exposure to laboratory light sources Fluorescent UV lamps
NASA STD 6002 : 2008 APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 IBC® Code and Commentary, Volume 2
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
CSA B51S1 : 2005 SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
UNE-EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
PREN 927-6 : DRAFT 2016 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
16/30353140 DC : 0 PD IEC/TS 62788-7-2 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 7-2: ENVIRONMENTAL EXPOSURES - ACCELERATED WEATHERING TESTS OF POLYMERIC MATERIALS
CSA HGV 3.1 : 2013 FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES
13/30256722 DC : 0 BS ISO 11617 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING
UNI EN ISO 16474-3 : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
11/30211719 DC : 0 BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
08/30180643 DC : DRAFT APRIL 2008 BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS
16/30345769 DC : 0 BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
MIL-PRF-61002 Revision B:2008 Labels, Pressure-Sensitive Adhesive, for Bar Coding
AASHTO MP 22 : 2013(R 2019) SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES
BS EN ISO 16474-3:2013 Paints and varnishes. Methods of exposure to laboratory light sources Fluorescent UV lamps
MIL-DTL-64159 Revision B:2011 CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT
CSA C411.6 : 2011 : INC : UPD 2 : 2013 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
ASTM D 3451 : 2006 : R2012 Standard Guide for Testing Coating Powders and Powder Coatings
CSA C411.7 : 2011 : R2016 COMPOSITE INSULATORS FOR GUY WIRES
CSA C60044-1 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
DIN EN ISO 16474-3 E : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
CSA C60044-1 : 2007 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
SAE J 2577 : 2015 HEAVY DUTY LAMP ELECTRICAL CONNECTOR STANDARD
AASHTO TP 103 : 2013(R2018) METHOD OF TEST FOR DETECTABLE WARNING SYSTEMS
SAE J 560 : 2016 PRIMARY AND AUXILIARY SEVEN CONDUCTOR ELECTRICAL CONNECTOR FOR TRUCK-TRAILER JUMPER CABLE
IEEE 1656 : 2010 TESTING THE ELECTRICAL, MECHANICAL, AND DURABILITY PERFORMANCE OF WILDLIFE PROTECTIVE DEVICES ON OVERHEAD POWER DISTRIBUTION SYSTEMS RATED UP TO 38 KV.
IEEE C57.12.32-2002 IEEE Standard for Submersible Equipment - Enclosure Integrity
I.S. EN ISO 16474-3:2013 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
ASTM C 1519 : 2010 : R2017 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
CSA 12.3 : 2014 FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES
ASTM F 520 : 2016 : REDLINE Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
ASTM F 883 : 2013 : REDLINE Standard Performance Specification for Padlocks
ASTM E 1797 : 2012 : R2017 : EDT 1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
SAE J 2030 : 2015 HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD
ASTM D 7032 : 2017 : REDLINE Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
NSF 50 : 2016 EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES
ISO 21898:2004 Packaging Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
ISO 16474-3:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ASTM E 2136 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
BS EN ISO 21898:2005 Packaging. Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
ASTM E 2136 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
BS EN ISO 11507:2007 Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water
BS EN 1898:2001 Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods
UNE-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013)
ISO 11507:2007 Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
BS EN ISO 11439:2013 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
EN ISO 21898:2005 Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004)
ANSI/EIMA 99A : 2001 EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS)
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
CSA C310 : 2009 : INC : UPD 2 : 2012 DISTRIBUTION CLASS POLYMERIC CUTOUTS
ISO 9370:2017 Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
CSA NGV4.2 : 2014 HOSES FOR NATURAL GAS DISPENSING SYSTEMS
CSA HGV 4.4 : 2013(R2018) STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS
DIN EN ISO 16474-3:2014-03 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
MIL-DTL-53039 Revision E:2013 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
BS ISO 14186:2013 Air cargo. Fire containment covers. Design, performance and testing requirements
ASTM D 6848 : 2002 Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011)
CSA C411.5 : 2016 DEAD-END/SUSPENSION COMPOSITE INSULATORS FOR OVERHEAD LINES <= 75 KV
ASTM F 1945 : 2005 : R2011 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting (Withdrawn 2020)
CSA HGV 4.2 : 2013 HOSES FOR COMPRESSED HYDROGEN FUEL STATIONS, DISPENSERS AND VEHICLE FUEL SYSTEMS
CSA C411.7 : 2011 : INC : UPD 1 : 2011 COMPOSITE INSULATORS FOR GUY WIRES
PD IEC/TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules Environmental exposures. Accelerated weathering tests of polymeric materials
ASTM D 5893 : 2004 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
CSA C411.7 : 2011 COMPOSITE INSULATORS FOR GUY WIRES
FM 4430 : 2012 HEAT AND SMOKE VENTS
ASTM D 7052/D7052M : 2017 Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
CSA C867.2 : 2009 PERFORMANCE OF DECORATIVE LIGHT STRINGS
CSA HGV 4.5 : 2013 STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING
SAE J 3008 : 2017 Sealed Trailer Tow Connector<br>
ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
ASTM D 4674 : 2002 : REV A : R2010 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments (Withdrawn 2019)
ASTM F 2947/F2947M : 2014-03 SPECIFICATION FOR 150 TO 1500 MM [6 TO 60 IN.] ANNULAR CORRUGATED PROFILE-WALL POLYETHYLENE (PE) PIPE AND FITTINGS FOR SANITARY SEWER APPLICATIONS
ASTM D 7745 : 2011 Standard Practice for Testing Pultruded Composites
ASTM C 1248 : 2008 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM F 2957 : 2013 Standard Specification for Ornamental Aluminum Fence Systems
ASTM D 925 : 2014 : REDLINE Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM C 1382 : 2016 : REDLINE Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ISO 14186:2013 Air cargo Fire containment covers Design, performance and testing requirements
ASTM E 3006 : 2015 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
IEEE C37.41-2008 REDLINE IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
BS ISO 19281:2016 Air cargo. Fire resistant containers. Design, performance and testing requirements
UNI EN ISO 11439 : 2013 GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES
NBR 15575-1 : 2013 RESIDENTIAL BUILDINGS - PERFORMANCE - PART 1: GENERAL REQUIREMENTS
ASME A112.19.8 : 2007 SUCTION FITTINGS FOR USE IN SWIMMING POOLS, WADING POOLS, SPAS, AND HOT TUBS

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 16474-3:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ASTM D 5870 : 2016 : REDLINE Standard Practice for Calculating Property Retention Index of Plastics
ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
ASTM G 113 : 2016 : REDLINE Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.