MIL-PRF-22750 Revision G:2011
Current
The latest, up-to-date edition.
Coating, Epoxy, High-Solids
12-09-2011
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)).
| DevelopmentNote |
Supersedes MIL C 22750 (E). (09/2011)
|
| DocumentType |
Standard
|
| Pages |
46
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)). This coating is lead and chromate free. The coating is supplied as a kit.
| MIL-DTL-23971 Revision E:2017 | Power Dividers, Power Combiners, and Power Divider/Combiners, General Specification for |
| MIL-DTL-32403 Base Document:2012 | Fire Extinguisher, Employing HFC-227ea Agent Enhanced with Special Sodium Bicarbonate Powder (HFC-227ea/SBCS), Portable, with Bracket |
| MIL-DTL-53072 Revision F:2017 | Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection |
| MIL-W-13855 Revision D:1973 | Weapons: Small Arms and Aircraft Armament Subsystems, General Specification for |
| MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
| MIL-PRF-32405 Base Document:2013 | Cleaner, Hand Wipe, Metallic Substrates, Low or Exempt VOC and HAP Free |
| MIL-PRF-6799 Revision L:2010 | Coatings, Sprayable, Strippable, Protective, Water Emulsion |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-DTL-45068 Revision E:2006 | Light, Dome, Vehicular, 24 Volt DC |
| MIL-DTL-62366 Revision D:2010 | Ring Assemblies, Electrical Contact |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-PRF-7907 Revision C:2007 | Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
| MIL-DTL-10215 Revision M:2010 | Speedometers, Tachometers, Flexible Shaft Assemblies, Flexible Shaft Assembly Cores and Adapters |
| MIL-DTL-18264 Revision E:2015 | Finishes, Organic, Weapons Systems, Application and Control of |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| ASTM E 2463 : 2011 : REDLINE | PERFORMANCE SPECIFICATION FOR CARGO BED COVER (CBC) M105A2 TRAILER, TYPE 2 |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-DTL-62481 Revision A:1998 | Intercommunication Control Unit (No S/S Document) |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| MIL-DTL-62461 Revision E:1998 | Transmission Assembly |
| SAE AMS3167B | Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds |
| ASTM E 2517 : 2013 : REDLINE | Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer) |
| MIL-DTL-53077 Revision A:2011 | Mounting Kit: M1, Roller, Mine Clearing Track-Width, Tank Mounted |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| SAE AMS3092A | Release Agent, for Use During Form-In-Place Gasket Preparation |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| ASTM A 1008/A1008M : 2016-09 | SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE |
| ASTM D 5895 : 2013 : REDLINE | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| MIL-PRF-23377 Revision K:2012 | Primer Coatings: Epoxy, High-Solids |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-DTL-53022 Revision E:2012 | Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant, Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| MIL-DTL-12468 Revision E:2009 | Decontaminating Agent, STB |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| TT-C-490 Revision F:2013 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| ASTM E 1331 : 2015 : REDLINE | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.