EI SAFE HANDLING STORAGE BIOMASS TPS : 1ED 2016
Current
Current
The latest, up-to-date edition.
SAFE HANDLING AND STORAGE OF BIOMASS IN THERMAL POWER STATIONS
Published date
11-04-2016
Sorry this product is not available in your region.
Acknowledgements
Foreword
1 Introduction
2 Types and supply of biomass
3 Hazardous properties
4 Properties during handling
5 Handling and storage
6 Learning from experience
7 Implementing safe design
8 Prevention
9 Fire, gas detection and means of escape
10 Explosion precautions
11 Fire control
12 Operating procedures
13 Relevant legislation
14 Contents of a DSEAR risk assessment
15 Contents of a fire risk assessment
Annexes
Annex A - Glossary of terms and acronyms
Annex B - References and literature review
Annex C - Major incident review
Specifies information and guidance for the safe on-site handling and storage of biomass material suitable for burning in thermal power stations.
| DocumentType |
Standard
|
| PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
| Status |
Current
|
| BS EN 14961-2:2011 | Solid biofuels. Fuel specifications and classes Wood pellets for non-industrial use |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| BS EN 15297:2011 | Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| BS EN 12882:2015 | Conveyor belts for general purpose use. Electrical and flammability safety requirements |
| BS EN 14797:2006 | Explosion venting devices |
| BS EN 14778:2011 | Solid biofuels. Sampling |
| BS EN ISO 340:2013 | Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method |
| BS EN 15089:2009 | Explosion isolation systems |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| BS EN 50281-2-1:1999 | Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures |
| BS EN 15188:2007 | Determination of the spontaneous ignition behaviour of dust accumulations |
| BS EN 13821:2002 | Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures |
| BS EN 14034-1 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| BS EN 15359:2011 | Solid recovered fuels. Specifications and classes |
| BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 16447:2014 | Explosion isolation flap valves |
| BS EN 12881-2 : 2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
| BS EN 60079-10-2:2015 | Explosive atmospheres Classification of areas. Explosive dust atmospheres |
| BS EN 14034-2 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| BS EN 1554:2012 | Conveyor belts. Drum friction testing |
| BS EN 14034-3 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| BS EN 12881-1:2014 | Conveyor belts. Fire simulation flammability testing Propane burner tests |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| PD CEN/TR 15281:2006 | Guidance on inerting for the prevention of explosions |
| BS EN 14034-4 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| BS EN 60079-11:2012 | Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| BS EN 14491:2012 | Dust explosion venting protective systems |
| BS EN 14961-1:2010 | Solid biofuels. Fuel specifications and classes General requirements |
| BS EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS IEC 61882:2001 | Hazard and operability studies (HAZOP studies). Application guide |
| BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| BS EN 15210-1:2009 | Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets |
| BS EN 13478 : 2002 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
Summarise
Sorry this product is not available in your region.