EN 14984:2016
Current
The latest, up-to-date edition.
Liming materials - Determination of product effect on soil pH - Soil incubation method
13-07-2016
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Method A
6 Method B
7 Test report
Annex A (informative) - Variations to the test methods
Annex B (normative) - Determination of moisture at full
soil water holding capacity
Bibliography
This document specifies two methods (method A and method B) of measuring the effect of the addition of any material claimed to have a liming effect on the soil, using the same basic principles.Method A measures the changes to the soil pH resulting from the addition of any material claimed to have a liming effect on a standard soil, measured over a period of one month.Method B assesses the efficiency of any material claimed to have a liming effect, using a range of defined soils and measured over a period of up to 2,5 years.The methods are not applicable to mineral products coarser than 6,3 mm for method A or 20 mm for method B, determined according to EN 12948.NOTEThese methods allow comparison of products under controlled climatic conditions but do not replace field experiments.
| Committee |
CEN/TC 260
|
| DevelopmentNote |
Supersedes PREN 14984. (07/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 14984 : 2016 | Identical |
| DIN EN 14984:2016-10 | Identical |
| I.S. EN 14984:2016 | Identical |
| NEN EN 14984 : 2016 | Identical |
| NF EN 14984 : 2016 | Identical |
| NBN EN 14984 : 2006 | Identical |
| BS EN 14984:2016 | Identical |
| NS EN 14984 : 2006 | Identical |
| UNE-EN 14984:2017 | Identical |
| UNE 56810 :2002 | Identical |
| 16/30330785 DC : 0 | BS EN 14069 - LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING |
| I.S. EN 12945:2014 | LIMING MATERIALS - DETERMINATION OF NEUTRALISING VALUE - TITRIMETRIC METHODS |
| BS EN 16357:2013 | Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid |
| 17/30358420 DC : 0 | BS ISO 22146 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| 12/30263890 DC : 0 | BS EN 12945 - LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
| EN 14069:2017 | Liming materials - Denominations, specifications and labelling |
| I.S. EN 14069:2017 | LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING |
| I.S. EN 16357:2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| PREN 14069 : DRAFT 2016 | LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING |
| BS EN 12945 : 2014 | LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
| EN 16357:2013 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| PREN 12945 : DRAFT 2012 | LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS |
| DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| BS EN 14069:2017 | Liming materials. Denominations, specifications and labelling |
| UNE-EN 12945:2015 | Liming materials - Determination of neutralizing value - Titrimetric methods |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| EN 12945:2014+A1:2016 | Liming materials - Determination of neutralizing value - Titrimetric methods |
| ISO 3310-1:2016 | Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth |
| EN 12948:2010 | Liming materials - Determination of size distribution by dry and wet sieving |
| ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
| ISO 11272:2017 | Soil quality — Determination of dry bulk density |
| EN 1482-3:2016 | Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps |
| EN 12049:1996 | Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified) |
| ISO 8190:1992 | Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C |
| ISO 11277:2009 | Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation |
| EN 13040:2007 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| EN 13971:2012 | Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 11274:1998 | Soil quality — Determination of the water-retention characteristic — Laboratory methods |
| EN 12048:1996 | Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)°C (ISO 8190:1992 modified) |
| ISO 10390:2005 | Soil quality — Determination of pH |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 14235:1998 | Soil quality — Determination of organic carbon by sulfochromic oxidation |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| NFX 31 130 : 1999 | SOIL QUALITY - CHEMICAL METHODS - DETERMINATION OF CATIONIC EXCHANGE CAPACITY (CEC) AND EXTRACTIBLE CATIONS |
| ISO 8189:1992 | Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure |
| EN 1482-1:2007 | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |