ISO 5725-1:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
20-07-2023
Published date
22-12-1994
The purpose is to outline the general principles to be understood when assessing accuracy (trueness and precision) of measurement methods and results, and in applications, and to establish practical estimations of the various measures by experiment. Is concerned exclusively with measurement methods which yield measurements on a continuous scale and give a single value as the test result. May be applied to a very wide range of materials, including liquids, powders and solid objects, manufactured or naturally occurring, provided that due consideration is given to any heterogeneity of the material.
| Committee |
ISO/TC 69/SC 6
|
| DevelopmentNote |
Along with ISO 5725-2, ISO 5725-3, ISO 5725-4, ISO 5725-5 and ISO 5725-6, it supersedes ISO 5725. (04/2001)
|
| DocumentType |
Standard
|
| Pages |
18
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 3534-3:1985, ISO Guide 33:1989,
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS ISO 5725-1:1995 | Identical |
| DS ISO 5725-1 : 1995 COR 1 2000 | Identical |
| DIN ISO 5725:1988-04 | Identical |
| UNE 82009-1:1998 | Similar to |
| GOST R ISO 5725-1 : 2002 ERRATA 2003 | Identical |
| BIS IS 15393-1 : 2003 | Identical |
| SS-ISO 5725-1:2003 | Identical |
| SAC GB/T 6379-1 : 2004 | Identical |
| PN ISO 5725-1 : 2002 | Identical |
| DIN ISO 5725-1:1997-11 | Identical |
| BS ISO 5725-1:1994 | Identical |
| NBN ISO 5725 1 : 1996 | Identical |
| UNI ISO 5725-1 : 2004 | Identical |
| NF ISO 5725-1 : 1994 | Identical |
| JIS Z 8402-1:1999 | Identical |
| DIN ISO 5725:1988-04 | Corresponds |
| I.S. EN ISO 12228-2:2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 2: OLIVE AND OLIVE POMACE OILS (ISO 12228-2:2014) |
| BS EN 15915:2010 | Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS) |
| 07/30165825 DC : 0 | BS ISO 29766 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES |
| BS EN ISO 12625-15:2015 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| DIN ISO 16260:2016-10 (Draft) | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| DIN EN 12390-11 E : 2015 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| DIN EN 15688:2008-11 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| ISO 20179:2005 | Water quality Determination of microcystins Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection |
| ISO 6656:2002 | Animal and vegetable fats and oils — Determination of polyethylene-type polymers |
| ISO 17053:2005 | Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas |
| DIN EN ISO 15303:2009-02 | Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS (ISO 15303:2001) |
| I.S. EN 15621:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| CSA ISO 15197 : 2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| BS ISO 15592-1:2001 | Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Sampling |
| DIN EN 15428 E : 2007 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| BS ISO 17221:2014 | Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image) |
| DIN EN ISO 489 E : 1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| 04/30098566 DC : DRAFT SEP 2004 | BS ISO 1169 - ZINC ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - TITRIMETRIC METHOD |
| PD CEN/TR 16338:2012 | Foodstuffs. Detection of food allergens. Template for supplying information about immunological methods and molecular biological methods |
| DIN EN ISO 11132:2017-10 | SENSORY ANALYSIS - METHODOLOGY - GUIDELINES FOR MONITORING THE PERFORMANCE OF A QUANTITATIVE SENSORY PANEL (ISO 11132:2012) |
| UNE-EN ISO 5536:2013 | Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) |
| I.S. EN 61391-1:2006 | Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
| BS ISO 29981:2010 | Milk products. Enumeration of presumptive bifidobacteria. Colony count technique at 37 °C |
| 08/30146086 DC : DRAFT MAY 2008 | BS ISO 26462 - MILK - DETERMINATION OF LACTOSE CONTENT - ENZYMATIC METHOD USING DIFFERENCE IN PH |
| DIN EN 15616 E : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 15/30286366 DC : 0 | BS ISO 19030-1 - SHIPS AND MARINE TECHNOLOGY - MEASUREMENT OF CHANGES IN HULL AND PROPELLER PERFORMANCE - PART 1: GENERAL PRINCIPLES |
| BS ISO 20494:2017 | Paper. Requirements for stability for general graphic applications |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| BS EN 15703-2:2014 | Copper and copper alloys. Determination of manganese content Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN ISO 20553:2017 | RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL (ISO 20553:2006) |
| BS ISO 13082:2011 | Milk and milk products. Determination of the lipase activity of pregastric lipase preparation |
| 14/30301619 DC : 0 | BS EN 15948 - CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-SPECTROSCOPY IN WHOLE KERNELS |
| DIN EN ISO 21068-1:2008-12 | CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
| 12/30255465 DC : 0 | BS ISO 12999-1 - ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| BS 5766-21:2001 | Methods for analysis of animal feeding stuffs Determination of potassium and sodium contents. Methods using flame-emission spectrometry |
| 14/30261903 DC : 0 | BS EN 16711-1 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| 13/30255888 DC : 0 | BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT) |
| 11/30251700 DC : 0 | BS EN 13804 - FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - GENERAL CONSIDERATIONS AND SPECIFIC REQUIREMENTS |
| BS ISO 13884 : 2003 AMD 15855 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ISOLATED TRANS ISOMERS BY INFRARED SPECTROMETRY |
| BS ISO 11378-1:2000 | Textile floor coverings. Laboratory soiling tests Kappasoil test |
| BS EN ISO 13843:2017 | Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods |
| BS EN 62563-1:2010 | Medical electrical equipment. Medical image display systems Evaluation methods |
| DIN EN ISO 12625-16 E : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| BS EN ISO 17059:2009 | Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) |
| DIN EN ISO 12873:2014-07 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| BS ISO 14892:2002 | Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography |
| DIN EN ISO/IEC 17043 E : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| I.S. EN ISO 3727-1:2002 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 1: DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| 06/30149267 DC : DRAFT APR 2006 | EN 15510 - ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM, ARSENIC, LEAD AND CADMIUM BY ICP-AES |
| DIN EN 15479 E : 2009 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| I.S. EN 15111:2007 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF IODINE BY ICP-MS (INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY) |
| DIN EN ISO 5536:2013-08 | Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| UNI EN 16117-1 : 2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85% |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| DIN EN 14793 E : 2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| BS ISO 5765-2:2002 | Dried milk, dried ice-mixes and processed cheese. Determination of lactose content Enzymatic method utilizing the galactose moiety of the lactose |
| BS EN 15305:2008 | Non-destructive testing. Test method for residual stress analysis by X-ray diffraction |
| 17/30341492 DC : 0 | BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS |
| 04/30114476 DC : DRAFT JUN 2004 | EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| I.S. EN 12506:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| DIN ISO 20193 E : 2015 | TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF THE WIDTH OF THE STRANDS OF CUT TOBACCO (ISO 20193:2012) |
| BS ISO 2469:2014 | Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) |
| BS EN ISO 15303:2008 | Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminant by GC/MS |
| UNI ISO 1442 : 2010 | MEAT AND MEAT PRODUCTS - DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| 04/30114470 DC : DRAFT JUN 2004 | EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD |
| UNI EN 15517 : 2008 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF INORGANIC ARSENIC IN SEAWEED BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER ACID EXTRACTION |
| 17/30354906 DC : 0 | BS ISO 21846 - VEGETABLE FATS AND OILS - DETERMINATION OF COMPOSITION OF TRIACYLGLYCEROLS AND COMPOSITION AND CONTENT OF DIACYLGLYCEROLS BY CAPILLARY GAS CHROMATOGRAPHY |
| EN ISO 19238:2017 | Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014) |
| DIN EN ISO 12999-1 E : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| BS EN 15587 : 2008 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| BS ISO 11085 : 2008 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD |
| 16/30332792 DC : DRAFT APR 2016 | BS EN ISO 2360 - NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD |
| 16/30313874 DC : 0 | BS ISO 4094 - PAPER, BOARD, AND PULPS - GENERAL REQUIREMENTS FOR THE COMPETENCE OF LABORATORIES AUTHORIZED FOR THE ISSUE OF OPTICAL REFERENCE TRANSFER STANDARDS OF LEVEL 3 |
| BS ISO 19238 : 2014 | RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS |
| DIN EN 15764 E : 2010 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY FLAME AND GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (FAAS AND GFAAS) AFTER PRESSURE DIGESTION |
| NFPA 270 : 2018 | STANDARD TEST METHOD FOR MEASUREMENT OF SMOKE OBSCURATION USING A CONICAL RADIANT SOURCE IN A SINGLE CLOSED CHAMBER |
| ISO 18363-3:2017 | Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol |
| BS ISO 10540-2:2003 | Animal and vegetable fats and oils. Determination of phosphorus content Method using graphite furnace atomic absorption spectrometry |
| BS EN ISO 18739:2016 | Dentistry. Vocabulary of process chain for CAD/CAM systems |
| BS ISO 15914 : 2004 AMD 15759 | ANIMAL FEEDING STUFFS - ENZYMATIC DETERMINATION OF TOTAL STARCH CONTENT |
| BS EN 10351:2011 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| DIN EN 15022-4:2012-01 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| BS ISO 18862:2016 | Coffee and coffee products. Determination of acrylamide. Methods using HPLC-MS/MS and GC-MS after derivatization |
| BS ISO 16035 : 2003 AMD 15854 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF LOW-BOILING HALOGENATED HYDROCARBONS IN EDIBLE OILS |
| BS 5766-23:2001 | Methods for analysis of animal feeding stuffs Determination of crude fibre content. Method with intermediate filtration |
| BS ISO 8968-3 : 2004 AMD 17262 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 3: BLOCK-DIGESTION METHOD (SEMI-MICRO RAPID ROUTINE METHOD) |
| 11/30243100 DC : 0 | BS EN 13649 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
| UNE-EN 16278:2012 | Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
| BS ISO 16638-1 : 2015 COR 2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS |
| PD 6644-1:1999 | Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes |
| I.S. EN 13130-7:2004 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS SUBSTANCES SUBJECT TO LIMITATION - PART 7: DETERMINATION OF MONOETHYLENE GLYCOL AND DIETHYLENE GLYCOL IN FOOD SIMULANTS |
| DIN EN ISO 16297 E : 2014 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| 11/30250564 DC : 0 | BS EN 16328 - FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE-PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| BS ISO 8069 : 2005 AMD 17261 | DRIED MILK - DETERMINATION OF CONTENT OF LACTIC ACID AND LACTATES |
| S.R. CEN/TS 16490:2013 | FERTILIZERS - COMPARISON OF THE CEN/TC 260/WG 7 RING TEST RESULTS WITH TOLERANCES GIVEN IN THE REGULATION (EC) NR 2003/2003 ANNEX 2 AND CONCLUSIONS |
| 07/30159086 DC : 0 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| PD CEN/TS 16375:2013 | Liming materials. Determination of the amount of residual finely ground carbonate in soils. Volumetric method |
| UNI EN ISO 1518-1 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| 15/30303049 DC : 0 | BS ISO 21033 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| BS ISO 18252:2006 | Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method) |
| BS ISO 17997-1:2004 | Milk. Determination of casein-nitrogen content Indirect method (Reference method) |
| DIN EN 16357 E : 2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| DIN EN ISO 11701:2010-04 | Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) |
| DD CEN/TS 15477:2006 | Fertilizers. Determination of the water-soluble potassium content |
| UNI EN 15585 : 2009 | CEREALS AND CEREAL PRODUCTS - DURUM WHEAT (T. DURUM DESF.) - DETERMINATION OF PERCENTAGE OF MITADINE GRAINS AND CALCULATION OF PERCENTAGE OF VITREOUS GRAINS |
| BS ISO 5543:2004 | Caseins and caseinates. Determination of fat content. Gravimetric method (reference method) |
| I.S. EN 13130-6:2004 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS SUBSTANCES SUBJECT TO LIMITATION - PART 6: DETERMINATION OF VINYLIDENE CHLORIDE IN PLASTICS |
| 12/30259087 DC : DRAFT JULY 2012 | BS EN 1608 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES |
| BS EN ISO 19238:2017 | Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| CSA Z24510 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| DIN EN 12390-11:2015-11 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE |
| 08/30153135 DC : 0 | BS ISO 28218 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR RADIOBIOASSAY |
| ISO 17780:2015 | Animal and vegetable fats and oils Determination of aliphatic hydrocarbons in vegetable oils |
| 12/30234846 DC : 0 | BS ISO 19238 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS |
| BS EN 16024:2011 | Fertilizers. Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea. Method using high-performance liquid chromatography (HPLC) |
| PD CEN/TR 15522-2:2012 | Oil spill identification. Waterborne petroleum and petroleum products Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses |
| BS ISO 27048:2011 | Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure |
| BS EN ISO 21415-2:2015 | Wheat and wheat flour. Gluten content Determination of wet gluten and gluten index by mechanical means |
| I.S. EN 15749:2009 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| BS EN 15749:2009 | Fertilizers. Determination of sulfates content using three different methods |
| BIS IS 15393-6 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| 17/30291335 DC : 0 | BS EN ISO 8199 - WATER QUALITY - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS BY CULTURE |
| DIN EN 16318:2016-07 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| 09/30197026 DC : 0 | BS ISO 14490-8 - OPTICS AND PHOTONICS - TEST METHODS FOR TELESCOPIC SYSTEMS - PART 8: TEST METHODS FOR NIGHT-VISION DEVICES |
| ISO 12817:2013 | Fibre-reinforced plastic composites — Determination of open-hole compression strength |
| 16/30340978 DC : 0 | BS ISO 19983 - RUBBER - DETERMINATION OF PRECISION OF TEST METHODS |
| UNE-EN ISO 12779:2013 | Lactose - Determination of water content - Karl Fischer method (ISO 12779:2011) |
| DIN EN ISO 5529:2010-08 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007); German version EN ISO 5529:2010 |
| ISO 5629:2017 | Paper and board — Determination of bending stiffness — Resonance method |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| UNE-EN 14865-1:2010 | Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| PD CEN/TS 16490:2013 | Fertilizers. Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions |
| BS ISO 3781:2011 | Paper and board. Determination of tensile strength after immersion in water |
| BS EN ISO 11702:2009 | Animal and vegetable fats and oils. Enzymatic determination of total sterols content |
| 02/704627 DC : DRAFT APR 2002 | ISO/DIS 13875 (IDF 178) - HEAT-TREATED MILK - DETERMINATION OF ACID-SOLUBLE BETA-LACTOGLOBULIN CONTENT - REVERSE-PHASE HPLC METHOD |
| BS ISO 8199 : 2005 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| BS ISO 7485 : 2000 | METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF POTASSIUM AND SODIUM CONTENTS - METHODS USING FLAME-EMISSION SPECTROMETRY |
| ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
| BS ISO 16260:2016 | Paper and board. Determination of internal bond strength |
| ISO 16532-3:2010 | Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
| BS 6043-2.16:1998 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke Determination of water content of calcined coke |
| 15/30269207 DC : 0 | BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY |
| NF EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| DIN EN 15605:2010-12 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| BS ISO 21033:2016 | Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| UNI EN ISO 29822 : 2014 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS |
| 17/30349157 DC : 0 | BS ISO 8559-3 - SIZE DESIGNATION OF CLOTHES - PART 3: METHODOLOGY OF THE CREATION OF THE BODY MEASUREMENT TABLES AND INTERVALS |
| UNI EN 15616 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 20553:2006 | Radiation protection Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material |
| PD ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| BS ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method |
| 17/30319520 DC : 0 | BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES |
| BS ISO 6565:2011 | Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 04/30118518 DC : DRAFT AUG 2004 | EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| 03/307063 DC : DRAFT APR 2003 | BS ISO 16305 - BUTTER - DETERMINATION OF FIRMNESS |
| 15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
| 01/713866 DC : DRAFT OCT 2001 | PREN 12258-2 - ALUMINIUM AND ALUMINIUM ALLOYS - TERMS AND DEFINITIONS - PART 2: CHEMICAL ANALYSIS |
| UNE-EN ISO 16014-5:2013 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012) |
| DIN EN ISO 18854:2015-08 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| 07/30159027 DC : 0 | BS EN 14865-1 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE ORDINARY-SPEED VEHICLES WITH SPEEDS UP TO 200 KM/H AND HIGH-SPEED VEHICLES WITH SPEEDS UP TO 300 KM/H |
| 07/30160477 DC : 0 | BS EN 15622 - COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN 15749 E : 2010 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| 08/30182372 DC : DRAFT JULY 2008 | BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| BS EN 15622:2010 | Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS) |
| BS EN ISO 13906:2008 | Animal feeding stuffs. Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents |
| BS EN ISO 5529:2010 | Wheat. Determination of the sedimentation index. Zeleny test |
| BS ISO 6851:2001 | Photography. Processing waste. Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS EN ISO 11876:2010 | Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method |
| DIN EN ISO 5536 E : 2013 | MILK FAT PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 5536:2009) |
| 11/30218023 DC : 0 | BS EN ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| ISO 8791-3:2017 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method |
| DIN EN ISO 13906:2008-11 | ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
| BS ISO 14127:2008 | Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
| DIN EN 16317 E : 2017 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| 04/30114464 DC : DRAFT JUN 2004 | EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| 16/30325457 DC : 0 | BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| ISO 8851-1:2004 | Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 1: Determination of moisture content |
| ISO/TS 20612:2007 | Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories |
| BS 6043-3.4:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| DD ISO/TS 6090:2004 | Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder. Detection of phosphatase activity |
| BS EN ISO 12872:2014 | Olive oils and olive-pomace oils — Determination of the 2-glyceryl monopalmitate content |
| DIN EN 15704:2009-06 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| 08/30172893 DC : DRAFT FEB 2008 | BS ISO 29841 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF THE DEGRADATION PRODUCTS OF CHLOROPHYLLS A (PHEOPHYTINS AND PYROPHEOPHYTINS) |
| 09/30151431 DC : 0 | BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| 14/30196840 DC : 0 | BS ISO 19272 - LOW ALLOYED STEEL - DETERMINATION OF TEN ELEMENTS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (ROUTINE METHOD) |
| DIN EN 15616:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 14/30283682 DC : 0 | BS ISO 14707 - SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE |
| ISO 20391-1:2018 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
| 06/19977467 DC : DRAFT SEP 2006 | |
| 10/30197374 DC : 0 | BS ISO 3656 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION |
| BS ISO 11877:2008 | Hardmetals. Determination of silicon in cobalt metal powders. Photometric method |
| DD ISO/TS 13899-3:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of W content |
| DIN ISO 3039:2011-06 | Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
| BS ISO 29822 : 2009 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS |
| DD ISO/TS 6733:2006 | Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method |
| PD IEC/TR 62697-3:2018 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Test method for quantitative determination of elemental sulfur |
| DIN EN ISO 12999-1:2014-09 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| BS 5766-16:1999 | Methods for analysis of animal feeding stuffs Determination of aflatoxin B<sub>1</sub> content of mixed feeding stuffs (high-performance liquid chromatographic method) |
| 02/712187 DC : DRAFT DEC 2002 | ISO 8851-1 - BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS (ROUTINE METHODS) - PART 1: DETERMINATION OF MOISTURE CONTENT |
| I.S. EN 16487:2014 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| BS ISO 12779 : 2011 | LACTOSE - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| 16/30302555 DC : 0 | BS ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC- AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| BS 5766-25(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENTS OF CALCIUM, COPPER, IRON, MAGNESIUM, POTASSIUM, SODIUM AND ZINC - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| BS 6068-2.91(2004) : 2004 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| BS ISO 27871:2011 | Cheese and processed cheese. Determination of the nitrogenous fractions |
| BS ISO 15303 : 2001 | ANIMAL AND VEGETABLE FATS AND OILS - DETECTION AND IDENTIFICATION OF A VOLATILE ORGANIC CONTAMINANT BY GC/MS |
| 04/30118511 DC : DRAFT AUG 2004 | EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| 14/30284090 DC : 0 | BS ISO 13909-1 - HARD COAL AND COKE - MECHANICAL SAMPLING - PART 1: GENERAL INTRODUCTION |
| BS 3900-A24(2000) : 2000 AMD 13286 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
| I.S. EN ISO 22630:2015 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - RAPID EXTRACTION METHOD (ISO 22630:2015) |
| 08/30181397 DC : DRAFT APR 2008 | BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| BS EN 15477:2009 | Fertilizers. Determination of the water-soluble potassium content |
| BS ISO 6646:2011 | Rice. Determination of the potential milling yield from paddy and from husked rice |
| BS ISO 16945:2014 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| BS ISO 17058:2004 | Steel and iron. Determination of arsenic content. Spectrophotometric method |
| BS ISO 2171 : 2007 | CEREALS, PULSES AND BY-PRODUCTS - DETERMINATION OF ASH YIELD BY INCINERATION |
| BS EN 16319 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| PREN 16117-2 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| BS 5766-24(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN E CONTENT - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| 16/30342876 DC : 0 | BS EN 15550 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| 13/30288136 DC : 0 | BS EN 15703-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 18144:2003 | Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Method based on solanesol |
| DD CEN/TS 15476:2006 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda |
| 11/30244423 DC : 0 | BS ISO 14222 - SPACE ENVIRONMENT (NATURAL AND ARTIFICIAL) - EARTH UPPER ATMOSPHERE |
| BS 6200-3.11.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt Flame atomic absorption spectrometric method |
| 17/30312516 DC : 0 | BS EN ISO 4945 - STEEL - DETERMINATION OF NITROGEN - SPECTROPHOTOMETRIC METHOD |
| DD ISO/TS 17996:2006 | Cheese. Determination of rheological properties by uniaxial compression at constant displacement rate |
| S.R. CEN/TR 15522-2:2012 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS BASED ON GC-FID AND GC-MS LOW RESOLUTION ANALYSES |
| 08/30180423 DC : DRAFT MAR 2008 | BS ISO 26323 - MILK PRODUCTS - DETERMINATION OF THE ACIDIFICATION ACTIVITY OF DAIRY CULTURES BY CONTINUOUS PH MEASUREMENT (CPH) |
| 08/30170398 DC : 0 | BS ISO 10932 - MILK AND MILK PRODUCTS - DETERMINATION OF THE MINIMAL INHIBITORY CONCENTRATION (MIC) OF ANTIBIOTICS APPLICABLE TO BIFIDOBACTERIA AND NON-ENTEROCOCCAL LACTIC ACID BACTERIA (LAB) |
| 14/30284280 DC : 0 | BS ISO 6721-10 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER |
| DIN EN 15025 E : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN ISO 11132:2017-10 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012); German version EN ISO 11132:2017 |
| DIN 10483-2:2002-08 | Determination of lactoperoxidase activity in milk by reflectance spectroscopy |
| 16/30331690 DC : 0 | BS EN ISO 20227 - WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST |
| BS EN 15690-2:2009 | Copper and copper alloys. Determination of iron content Flame atomic absorption spectrometric method (FAAS) |
| 12/30259920 DC : DRAFT JULY 2012 | BS ISO 3657 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE |
| BS ISO 22036:2008 | Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES) |
| BS ISO 6611:2004 | Milk and milk products. Enumeration of colony-forming units of yeasts and/or moulds. Colony-count technique at 25°C |
| 03/306294 DC : DRAFT APR 2003 | EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS |
| DIN EN 16328:2013-02 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
| 13/30230645 DC : 0 | BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH |
| 02/706196 DC : DRAFT JUN 2002 | ISO/DIS 5537 - DRIED MILK - DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| ISO 8243:2013 | Cigarettes — Sampling |
| 16/30348268 DC : 0 | BS EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 13468-2 : 1999 AMD 16335 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - DOUBLE-BEAM INSTRUMENT |
| PD CEN/TR 14823:2003 | Durability of wood and wood-based products. Quantitative determination of pentachlorophenol in wood. Gas chromatographic method |
| 04/30126686 DC : DRAFT DEC 2004 | ISO 11816-1 - MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 1: FLUORIMETRIC METHOD FOR MILK AND MILK-BASED DRINKS |
| 07/30150368 DC : 0 | ISO 16918-1 - IRON AND STEEL - DETERMINATION OF NINE ELEMENTS BY THE INDUCTIVELY COUPLED PLASMA ATOMIC MASS SPECTROSCOPIC METHOD - PART 1: DETERMINATION OF TIN, ANTIMONY, CERIUM, LEAD AND BISMUTH |
| 05/30063596 DC : DRAFT JULY 2005 | EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT IMPACT ON SOIL PH - SOIL INCUBATION METHOD |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| UNE-EN 16117-1:2012 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| BS EN ISO 3960:2017 | Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| BS ISO 12745:2008 | Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques |
| UNE-EN ISO 5530-1:2015 | Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013) |
| DD CEN/TS 15406:2010 | Solid recovered fuels. Determination of bridging properties of bulk material |
| UNE-EN 16328:2013 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
| BS ISO 4094:2017 | Paper, board and pulps. General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 |
| UNE-EN ISO 734:2016 | Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) |
| ISO 7889:2003 | Yogurt Enumeration of characteristic microorganisms Colony-count technique at 37 degrees C |
| ISO 11877:2008 | Hardmetals — Determination of silicon in cobalt metal powders — Photometric method |
| UNE-EN ISO 17678:2010 | Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010) |
| UNE-EN ISO 14244:2017 | Oilseed meals - Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014) |
| UNI ISO 5636-5 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| EN ISO 6321:2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MELTING POINT IN OPEN CAPILLARY TUBES (SLIP POINT) |
| ISO 6561-2:2005 | Fruits, vegetables and derived products Determination of cadmium content Part 2: Method using flame atomic absorption spectrometry |
| BS ISO 14637 : 2004 AMD 16903 | MILK - DETERMINATION OF UREA CONTENT - ENZYMATIC METHOD USING DIFFERENCE IN PH (REFERENCE METHOD) |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| UNI EN ISO 16634-1 : 2009 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 1: OILSEEDS AND ANIMAL FEEDING STUFFS |
| 15/30317857 DC : 0 | BS EN 15477 - FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| DIN EN ISO 16634-1:2009-07 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 1: OILSEEDS AND ANIMAL FEEDING STUFFS |
| ISO 12078:2006 | Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Reference method) |
| DIN EN 10351:2011-05 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| ISO 5543:2004 | Caseins and caseinates Determination of fat content Gravimetric method (Reference method) |
| ISO 12985-1:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method |
| I.S. EN ISO 12873:2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| DIN EN 15585 E : 2008 | CEREALS AND CEREAL PRODUCTS - DURUM WHEAT (T. DURUM DESF.) - DETERMINATION OF PERCENTAGE OF MITADINE GRAINS AND CALCULATION OF PERCENTAGE OF VITREOUS GRAINS |
| PREN ISO 6647-1 : DRAFT 2013 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD (ISO/DIS 6647-1:2013) |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| DIN EN ISO 17678:2010-06 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| UNI EN 15587 : 2013 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| I.S. EN 15025:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN ISO 712 : 2010 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF MOISTURE CONTENT - REFERENCE METHOD |
| ISO 15322:2005 | Dried milk and dried milk products Determination of their behaviour in hot coffee (Coffee test) |
| ISO 8070:2007 | Milk and milk products — Determination of calcium, sodium, potassium and magnesium contents — Atomic absorption spectrometric method |
| ISO 8199:2005 | Water quality General guidance on the enumeration of micro-organisms by culture |
| ISO 5765-2:2002 | Dried milk, dried ice-mixes and processed cheese Determination of lactose content Part 2: Enzymatic method utilizing the galactose moiety of the lactose |
| BS EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method |
| ISO 3781:2011 | Paper and board — Determination of tensile strength after immersion in water |
| I.S. CR 10320:2004 | OPTICAL EMISSION ANALYSIS OF LOW ALLOY STEELS (ROUTINE METHOD) - METHOD FOR DETERMINATION OF C, SI, S, P, MN, CR, NI AND CU |
| I.S. EN 60456:2016 | CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| BS EN ISO 11132:2017 | Sensory analysis. Methodology. Guidelines for monitoring the performance of a quantitative sensory panel |
| I.S. EN ISO 12999-1:2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| I.S. EN ISO 1974:2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012) |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN ISO 18369-1:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01) |
| I.S. EN 15703-2:2014 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15764:2009 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY FLAME AND GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (FAAS AND GFAAS) AFTER PRESSURE DIGESTION |
| ISO 3356:2009 | Milk — Determination of alkaline phosphatase |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| I.S. CEN TS 15360:2006 | FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| BS ISO 27608 : 2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF LOVIBOND[R] COLOUR - AUTOMATIC METHOD |
| S.R. CEN TS 15406:2010 | SOLID RECOVERED FUELS - DETERMINATION OF BRIDGING PROPERTIES OF BULK MATERIAL |
| ISO 18144:2003 | Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Method based on solanesol |
| I.S. EN ISO 7027-1:2016 | WATER QUALITY - DETERMINATION OF TURBIDITY - PART 1: QUANTITATIVE METHODS (ISO 7027-1:2016) |
| I.S. CEN TS 14793:2005 | STATIONARY SOURCE EMISSION - INTRALABORATORY VALIDATION PROCEDURE FOR AN ALTERNATIVE METHOD COMPARED TO A REFERENCE METHOD |
| I.S. EN 15024-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15475:2009 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| S.R. CEN TS 15705:2009 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGHPERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
| ISO 11843-7:2012 | Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| I.S. EN ISO 3035:2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011) |
| UNE-EN ISO 21415-2:2016 | Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015) |
| BS EN 16320 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| ISO 6721-10:2015 | Plastics Determination of dynamic mechanical properties Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer |
| I.S. EN ISO 6571:2009 | SPICES, CONDIMENTS AND HERBS - DETERMINATION OF VOLATILE OIL CONTENT (HYDRODISTILLATION METHOD) (ISO 6571:2008) |
| I.S. EN ISO 13468-1:1997 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| I.S. EN ISO 2360:2017 | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| S.R. CEN/TS 16817-2:2015 | AMBIENT AIR - MONITORING THE EFFECTS OF GENETICALLY MODIFIED ORGANISMS (GMO) - POLLEN MONITORING - PART 2: BIOLOGICAL POLLEN SAMPLING USING BEE COLONIES |
| ISO 5765-1:2002 | Dried milk, dried ice-mixes and processed cheese Determination of lactose content Part 1: Enzymatic method utilizing the glucose moiety of the lactose |
| BS ISO 16014-3:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Low-temperature method |
| ISO 15790:2004 | Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty |
| ISO 3960:2017 | Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) endpoint determination |
| PREN 1607 : DRAFT 2012 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| BS ISO 14244 : 2014 | OILSEED MEALS - DETERMINATION OF SOLUBLE PROTEINS IN POTASSIUM HYDROXIDE SOLUTION |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ISO 12985-2:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| ISO 27105:2016 | Milk and cheese — Determination of hen's egg white lysozyme content by high performance liquid chromatography |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| DIN EN ISO 20227:2016-06 (Draft) | WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST (ISO 20227:2017) |
| ISO 11813:2010 | Milk and milk products — Determination of zinc content — Flame atomic absorption spectrometric method |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNE-EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| BS EN ISO 5534:2004 | Cheese and processed cheese. Determination of the total solids content (Reference method) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS EN ISO 17201-1:2005 | Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement |
| I.S. EN ISO 11132:2017 | SENSORY ANALYSIS - METHODOLOGY - GUIDELINES FOR MONITORING THE PERFORMANCE OF A QUANTITATIVE SENSORY PANEL (ISO 11132:2012) |
| UNE-EN 15616:2014 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
| ISO 20408:2017 | Traditional Chinese medicine — Panax notoginseng seeds and seedlings |
| ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
| ISO 3039:2010 | Corrugated fibreboard Determination of grammage of the component papers after separation |
| BS ISO 8454 : 2007 | CIGARETTES - DETERMINATION OF CARBON MONOXIDE IN THE VAPOUR PHASE OF CIGARETTE SMOKE - NDIR METHOD |
| DIN EN 15024-2:2007-01 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| ISO 6883:2017 | Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) |
| UNE-EN 10351:2012 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| UNI EN 15915 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN ISO 2171 : 2010 | CEREALS, PULSES AND BY-PRODUCTS - DETERMINATION OF ASH YIELD BY INCINERATION |
| UNI EN 16279 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF FLUORIDE CONTENT AFTER HYDROCHLORIC ACID TREATMENT BY ION-SENSITIVE ELECTRODE METHOD (ISE) |
| I.S. EN ISO 8292-1:2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SOLID FAT CONTENT BY PULSED NMR - PART 1: DIRECT METHOD |
| ISO 5660-2:2002 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
| ISO/TS 21098:2005 | Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571 |
| ISO 3037:2013 | Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
| EN ISO 16297 : 2014 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| ISO 12625-7:2014 | Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
| I.S. EN 12390-7:2009 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| EN ISO 11378-2:2001/A1:2017 | Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017) |
| DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| DIN EN 14936-1:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| EN ISO 12625-7:2014 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| DIN EN ISO 17932:2011-12 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| DIN EN 12698-1 E : 2007 | CHEMICAL ANALYSIS OF NITRIDE BONDED SILICON CARBIDE REFRACTORIES - PART 1: CHEMICAL METHODS |
| DIN EN 14242 E : 2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS |
| DIN EN ISO 1211:2010-11 | Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:2010) |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN ISO 20743 E : 2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| DIN EN 13130-8:2004-08 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics |
| DIN EN ISO 15788-2:2005-02 | Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography (HPLC) (ISO 15788-2:2003) |
| BS EN ISO 15301:2001 | Animal and vegetable fats and oils. Determination of sediment in crude fats and oils. Centrifuge method |
| ISO 734:2015 | Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum) |
| BS EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
| DIN EN 15360 E : 2007 | FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| BS EN ISO 5983-1:2005 | Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content Kjeldahl method |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN ISO 6647-1:2015 | Rice. Determination of amylose content Reference method |
| ISO/TS 16634-2:2009 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Part 2: Cereals, pulses and milled cereal products |
| ISO 21872-1:2017 | Microbiology of the food chain — Horizontal method for the determination of Vibrio spp. — Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus |
| BS ISO 24511:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN ISO 11691:1997 | Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method |
| I.S. EN ISO 665:2000 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| BS EN ISO 22160:2007 | Milk and milk-based drinks. Determination of alkaline phosphatase activity. Enzymatic photo-activated system (EPAS) method |
| BS EN 375:2001 | Information supplied by the manufacturer with in vitro diagnostic reagents for professional use |
| BS EN ISO 13884:2005 | Animal and vegetable fats and oils. Determination of isolated trans isomers by infrared spectrometry |
| BS EN ISO 10520:1998 | Native starch. Determination of starch content. Ewers polarimetric method |
| BS EN 14524:2004 | Foodstuffs. Determination of okadaic acid in mussels. HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection |
| BS EN ISO 16931:2009 | Animal and vegetable fats and oils. Determination of polymerized triacylglycerols by high-performance size- exclusion chromatography (HPSEC) |
| BS EN 13925-3:2005 | Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials Instruments |
| ISO 2759:2014 | Board — Determination of bursting strength |
| BS EN ISO 3656 : 2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION |
| ISO 12872:2010 | Olive oils and olive-pomace oils — Determination of the 2-glyceryl monopalmitate content |
| DIN EN ISO 663:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| UNE-EN ISO 12625-7:2015 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN ISO 734-2:2010 | Oilseed meals. Determination of oil content Rapid extraction method |
| UNE-EN ISO 662:2016 | Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:2016) |
| BS EN 10184:2006 | Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method |
| ISO 11214:1996 | Modified starch — Determination of carboxyl group content of oxidized starch |
| BS EN ISO 8420:2002 | Animal and vegetable fats and oils. Determination of content of polar compounds |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| BS EN ISO 19219:2003 | Animal and vegetable fats and oils. Determination of visible foots in crude fats and oils |
| BS EN ISO 9913-2:2000 | Optics and optical instruments. Contact lenses Determination of oxygen permeability and transmissibility by the coulometric method |
| UNE-EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| BS EN ISO 6647-2:2015 | Rice. Determination of amylose content Routine methods |
| BS EN 14888:2005 | Fertilizers and liming materials. Determination of cadmium content |
| BS EN 14940-2:2006 | Copper and copper alloys. Determination of chromium content FAAS method |
| BS EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN ISO 4625-1:2006 | Binders for paint and varnishes. Determination of softening point Ring-and-ball method |
| BS EN 14937-2:2006 | Copper and copper alloys. Determination of antimony content FAAS method |
| BS EN ISO 13468-1:1997 | Plastics. Determination of the total luminous transmittance of transparent materials Single-beam instrument |
| BS EN ISO 15788-2:2004 | Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils Method using high-performance liquid chromatography (HPLC) |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
| BS EN ISO 7784-3:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
| BS EN ISO 6885:2016 | Animal and vegetable fats and oils. Determination of anisidine value |
| BS EN ISO 9936:2016 | Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography |
| BS EN 15510:2017 | Animal feeding stuffs. Methods of sampling and analysis. Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
| BS EN ISO 9832:2003 | Animal and vegetable fats and oils. Determination of residual technical hexane content |
| BS EN ISO 2759:2014 | Board. Determination of bursting strength |
| I.S. EN ISO 7784-3:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 3: METHOD WITH ABRASIVE-PAPER COVERED WHEEL AND LINEARLY RECIPROCATING TEST SPECIMEN (ISO 7784-3:2016) |
| I.S. EN 15510:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| I.S. EN ISO 20743:2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| I.S. EN 61223-2-6:2007 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| I.S. EN 12619:2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD |
| I.S. EN ISO 11691:2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| DIN 10470:1999-07 | DETERMINATION OF WHEY PROTEIN CONTENT AND CASEIN CONTENT IN TOTAL PROTEIN OF MILK AND MILK PRODUCTS - DERIVATIVE SPECTROSCOPIC METHOD |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| DIN EN ISO 489:1999-08 | Plastics -Determination of refractive index (ISO 489:1999) |
| EN 16317:2013+A1:2017 | Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| DIN EN 15915:2010-12 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 8968-2:2002-06 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 2: BLOCK-DIGESTION METHOD (MACRO METHOD) |
| EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| CEN/TS 16317:2012 | Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| DIN EN 12441-9:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
| DIN EN 12441-8:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
| DIN EN 14888:2005-10 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM CONTENT |
| EN 12441-10:2004 | Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
| DIN EN 12697-1:2012-09 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| DIN EN ISO 13366-2:2007-01 | Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| DIN EN ISO 662:2016-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT (ISO 662:2016) |
| CEN/TS 15406:2010 | Solid recovered fuels - Determination of bridging properties of bulk material |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| DIN EN ISO 734-1:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| EN 15479:2009 | Fertilizers - Spectrophotometric determination of biuret in urea |
| DIN EN ISO 734-2:2010-08 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| EN 13130-6:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics |
| CEN/TS 15360:2006 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| DIN EN ISO 734-1:2007-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| CEN/TS 15749:2008 | Fertilizers - Determination of sulfates content using three different methods |
| EN 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| CEN/TS 14793:2005 | Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
| EN 15749:2009 | Fertilizers - Determination of sulfates content using three different methods |
| DIN EN ISO 665:2001-02 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| DIN EN ISO 13900:2002-10 | STEEL - DETERMINATION OF HIGH BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD AFTER DISTILLATION |
| DIN EN ISO 8968-4:2016-09 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 4: DETERMINATION OF PROTEIN AND NON-PROTEIN NITROGEN CONTENT AND TRUE PROTEIN CONTENT CALCULATION (REFERENCE METHOD) (ISO 8968-4:2016) |
| DIN EN ISO 11691:2010-01 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009 |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| CEN/TS 16320:2012 | Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
| DIN EN 15948:2015-06 | CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-SPECTROSCOPY IN WHOLE KERNELS |
| EN 15750:2009 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| DIN EN 15909:2010-11 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
| DIN EN 15905:2010-11 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
| CEN/TS 15401:2010 | Solid recovered fuels - Determination of bulk density |
| DIN EN ISO 3656:2017-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN 12698-1:2007-06 | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| DIN EN 14939:2006-09 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN 14938-2:2010 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 10361:2015 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| EN 13503-3 : 2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| EN 15023-3:2010 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15621:2007 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| CEN/TS 16318:2012 | Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
| DIN EN 16317:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| CEN ISO/TS 16634-2:2009 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO/TS 16634-2:2009) |
| EN ISO 16634-2:2016 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO 16634-2:2016) |
| CEN/TS 15705:2009 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| CEN/TS 15025:2006 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS) |
| EN ISO 11979-3:2012 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| EN 12441-8:2004 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
| EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| CEN/TS 15674:2007 | Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods |
| DIN 10759-1:1998-08 | ANALYSIS OF HONEY - DETERMINATION OF SACCHARASE ACTIVITY - PART 1: SIEGENTHALER METHOD |
| EN 13130-7:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants |
| DIN EN ISO 712:2010-04 | Cereals and cereal products - Determination of moisture content - Reference method (ISO 712:2009) |
| EN 12698-1:2007 | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| CEN/TS 16023:2013 | Characterization of waste - Determination of gross calorific value and calculation of net calorific value |
| DIN EN 14907:2005-11 | AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER |
| EN 1330-11:2007 | Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials |
| EN 15621:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES |
| EN ISO 12625-6:2016 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| EN 10355:2013 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| EN 10184:2006 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| EN 15022-4:2011 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| EN 15705:2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| EN ISO 13366-2:2006/AC:2007 | MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
| DIN EN ISO 534:2012-02 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| DIN EN ISO 15914:2005-06 | Animal feeding stuffs - Enzymatic determination of total starch content (ISO 15914:2004); German version EN 15914:2005 |
| CEN/TS 15022-4:2006 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN ISO 19219:2004-02 | Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils (ISO 19219:2002) |
| DIN EN 14242:2004-12 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| CEN/TS 16490:2013 | Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions |
| DIN EN ISO 5943:2007-01 | CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF CHLORIDE CONTENT - POTENTIOMETRIC TITRATION METHOD |
| EN 12390-11:2015 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| DIN EN 14941:2006-09 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| CEN/TS 15479:2006 | Fertilizers - Spectrophotometric determination of biuret in urea |
| EN ISO 3656:2011/A1:2017 | Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction - Amendment 1 (ISO 3656:2011/Amd 1:2017) |
| EN ISO 16050:2011 | Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method (ISO 16050:2003) |
| CEN/TS 15605:2007 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| EN 12441-9:2004 | Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
| CEN/TS 16817-2:2015 | Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| DIN EN 12441-7:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction |
| DIN EN 15054:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| DIN EN 15510:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| DIN EN 16841-1:2017-03 | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| DIN 38402-45:2003-04 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - GENERAL INFORMATION (GROUP A) - PART 45: LABORATORY PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS (A 45) |
| CEN/TR 16338 : 2012 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - TEMPLATE FOR SUPPLYING INFORMATION ABOUT IMMUNOLOGICAL METHODS AND MOLECULAR BIOLOGICAL METHODS |
| CR 14377:2002 | Air quality - Approach to uncertainty estimation for ambient air reference measurement methods |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| ONORM EN 1608 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES |
| I.S. EN 14242:2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS |
| I.S. EN ISO 5537:2004 | DRIED MILK - DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| I.S. EN ISO 10534-2:2001 | ACOUSTICS - DETERMINATION OF SOUND ABSORPTION COEFFICIENT AND IMPEDANCE IN IMPEDANCES TUBES - PART 2: TRANSFER-FUNCTION METHOD |
| ANSI/NEMA 62321-3-2:2020 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC) |
| I.S. EN ISO 11819-1:2002 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1: STATISTICAL PASS-BY METHOD |
| VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
| ONORM EN 826 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
| EN ISO 2171:2010 | Cereals, pulses and by-products - Determination of ash yield by incineration (ISO 2171:2007) |
| ISO 18145:2003 | Environmental tobacco smoke Determination of vapour phase nicotine and 3-ethenylpyridine in air Gas-chromatographic method |
| 11/30199740 DC : 0 | BS EN 16279 - ANIMAL FEEDING STUFFS - DETERMINATION OF FLUORIDE CONTENT AFTER HYDROCHLORIC ACID TREATMENT BY ION-SENSITIVE ELECTRODE METHOD (ISE) |
| BS EN 15705:2010 | Fertilizers. Determination of urea condensates using high-performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| S.R. CEN/TS 16375:2013 | LIMING MATERIALS - DETERMINATION OF THE AMOUNT OF RESIDUAL FINELY GROUND CARBONATE IN SOILS - VOLUMETRIC METHOD |
| DIN EN 16487:2015-02 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| ISO 7485:2000 | Animal feeding stuffs — Determination of potassium and sodium contents — Methods using flame-emission spectrometry |
| BS EN 15621:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES |
| 02/712188 DC : DRAFT DEC 2002 | ISO 8851-2 - BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS (ROUTINE METHODS) - PART 2: DETERMINATION OF NON-FAT SOLIDS CONTENT |
| 02/712189 DC : DRAFT DEC 2002 | ISO 8851-3 - BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS (ROUTINE METHODS) - PART 3: CALCULATION OF FAT CONTENT |
| BS ISO 12080-2:2009 | Dried skimmed milk. Determination of vitamin A content Method using high-performance liquid chromatography |
| DIN ISO 3034 E : 2016 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| 16/30337321 DC : 0 | BS ISO 20311 - TRADITIONAL CHINESE MEDICINE - SALVIA MILTIORRHIZA SEEDS AND SEEDLINGS |
| I.S. EN ISO 15195:2003 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| DIN EN 15765 E : 2010 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) AFTER PRESSURE DIGESTION |
| ISO/TS 2963:2006 | Cheese and processed cheese products Determination of citric acid content Enzymatic method |
| BS ISO 12078:2006 | Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method) |
| I.S. EN ISO 11876:2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS ISO 15174:2012 | Milk and milk products. Microbial coagulants. Determination of total milk-clotting activity |
| DIN EN ISO 11085:2016-02 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
| DIN EN 16711-2 E : 2016 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| 13/30272957 DC : 0 | BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| BS ISO 19272:2015 | Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method) |
| 01/121972 DC : DRAFT MAY 2001 | BS 3900-E12.3 - PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 3: DETERMINATION OF UNIVERSAL HARDNESS AND RELATED PROPERTIES USING A VICKERS INDENTOR |
| 14/30275429 DC : 0 | BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM |
| BS ISO 8791-3:2017 | Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method |
| DD CEN/TS 15022-4:2006 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometry method (FAAS) |
| DD CEN ISO/TS 17764-2:2006 | Animal feeding stuffs. Determination of the content of fatty acids Gas chromatographic method |
| 08/30174182 DC : DRAFT FEB 2008 | BS EN 15765 - FOODSTUFFS - DETERMINATION OF TIN BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) AFTER PRESSURE DIGESTION |
| DIN EN ISO 17059:2009-11 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| 04/30103818 DC : DRAFT JUL 2004 | ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| 04/30114467 DC : DRAFT JUN 2004 | EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD |
| 18/30318762 DC : 0 | BS ISO 20258 - MAGNESIUM LITHIUM ALLOYS - DETERMINATION OF LITHIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| CSA Z24510 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| I.S. EN 13526:2002 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON IN FLUE GASES FROM SOLVENT USING PROCESSES - CONTINUOUS FLAME IONISATION DETECTOR METHOD |
| BS ISO 24510:2007 | Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users |
| ISO/TS 15338:2009 | Surface chemical analysis Glow discharge mass spectrometry (GD-MS) Introduction to use |
| 04/30116842 DC : DRAFT JUL 2004 | ISO 12078 - ANHYDROUS MILK FAT - DETERMINATION OF STEROL COMPOSITION BY GAS LIQUID CHROMATOGRAPHY (REFERENCE METHOD) |
| I.S. EN ISO 7027:2000 | WATER QUALITY - DETERMINATION OF TURBIDITY |
| I.S. CR 14377:2002 | AIR QUALITY - APPROACH TO UNCERTAINTY ESTIMATION FOR AMBIENT AIR REFERENCE MEASUREMENT METHODS |
| BS ISO 6849:1996 | Photography. Processing wastes. Determination of boron |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| BS EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| BS ISO 19703:2005 | Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| I.S. EN ISO 8968-2:2002 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 2: BLOCK-DIGESTION METHOD (MACRO METHOD) |
| 14/30270453 DC : 0 | BS ISO 17780 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ALIPHATIC HYDROCARBONS IN VEGETABLE OILS |
| I.S. EN 16117-2:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| BS EN 15905:2010 | Fertilizers. Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
| I.S. EN ISO 15304:2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF THE CONTENT OF TRANS FATTY ACID ISOMERS OF VEGETABLE FATS AND OIL - GAS CHROMATOGRAPHIC METHOD |
| UNE-EN ISO 12872:2014 | Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010) |
| DD CEN/TS 15749 : DRAFT SEP 2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| 16/30310656 DC : 0 | BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS |
| DIN EN 15916-2:2010-12 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| BS EN 16117-2:2012 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content higher than 99,80 % |
| BS ISO 9611:1996 | Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
| UNI EN 16378 : 2013 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| DD CEN ISO/TS 21432:2005 | Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction |
| BS EN 16328:2012 | Fertilizers. Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP). Method using high-performance liquid chromatography (HPLC) |
| 04/30118515 DC : DRAFT AUG 2004 | EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD |
| I.S. EN ISO 3727-2:2002 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 2: DETERMINATION OF NON-FAT SOLIDS CONTENT (REFERENCE METHOD) |
| UNI CEN/TS 15621 : 2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE, COBALT AND MOLYBDENUM AFTER PRESSURE DIGESTION BY ICP-AES |
| 12/30196194 DC : 0 | BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| 12/30208986 DC : 0 | BS ISO 13933 - STEEL AND IRON - DETERMINATION OF CALCIUM AND MAGNESIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| DIN EN ISO 6883 E : 2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| UNI EN 15170 : 2009 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| UNI EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| UNI CEN/TR 16059 : 2010 | FOOD ANALYSIS - PERFORMANCE CRITERIA FOR SINGLE LABORATORY VALIDATED METHODS OF ANALYSIS FOR THE DETERMINATION OF MYCOTOXINS |
| BS EN ISO 12779:2013 | Lactose. Determination of water content. Karl Fischer method |
| 03/304751 DC : DRAFT APR 2003 | IEC 61223-3-5 ED.1.0 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| DIN EN 15688 E : 2008 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| I.S. CEN TS 14938-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| ISO 16945:2014 | Corrugating medium — Determination of the edge crush resistance after laboratory fluting |
| I.S. EN 14907:2005 | AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER |
| I.S. EN 13649:2002 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
| ISO 16958:2015 | Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method |
| 13/30276246 DC : 0 | BS EN 16317 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 15703-2 E : 2015 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 17/30366149 DC : 0 | BS ISO 28198 - VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER |
| BS EN 10361:2015 | Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method |
| I.S. EN ISO 734-1:2006 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| ISO 15174:2012 | Milk and milk products — Microbial coagulants — Determination of total milk-clotting activity |
| BS EN ISO 16638-1:2017 | Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds |
| 04/30114482 DC : DRAFT JUN 2004 | EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD |
| I.S. EN 15360:2007 | FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| DIN SPEC 45660-2 E : 2015 | GUIDE FOR DEALING WITH UNCERTAINTY IN ACOUSTICS AND VIBRATION - PART 2: UNCERTAINTY OF VIBRATION QUANTITIES |
| S.R. CEN/TR 16059:2010 | FOOD ANALYSIS - PERFORMANCE CRITERIA FOR SINGLE LABORATORY VALIDATED METHODS OF ANALYSIS FOR THE DETERMINATION OF MYCOTOXINS |
| BS ISO 16532-3:2010 | Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
| DIN EN ISO 3035:2012-02 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| UNE-CEN/TS 16490:2016 | Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions |
| BS ISO 23058:2006 | Milk and milk products. Ovine and caprine rennets. Determination of total milk-clotting activity |
| UNE-EN 15025:2011 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| 04/30118503 DC : DRAFT AUG 2004 | EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD |
| UNI EN 15765 : 2010 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) AFTER PRESSURE DIGESTION |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| 17/30342172 DC : 0 | BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
| BS EN 16487:2014 | Acoustics. Test code for suspended ceilings. Sound absorption |
| I.S. EN 13503-3:2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| 04/30114488 DC : DRAFT JUN 2004 | EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD |
| 15/30310176 DC : 0 | BS ISO 16958 - MILK PRODUCTS AND INFANT FORMULAE - DETERMINATION OF FATTY ACID CONTENT - CAPILLARY GAS CHROMATOGRAPHIC METHOD |
| UNI EN ISO 11876 : 2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS EN 16278:2012 | Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
| PD ISO/TS 17822-1:2014 | <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions |
| EN ISO 6571:2009/A1:2017 | SPICES, CONDIMENTS AND HERBS - DETERMINATION OF VOLATILE OIL CONTENT (HYDRODISTILLATION METHOD) (ISO 6571:2008/AMD 1:2017) |
| ISO/TS 6090:2004 | Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder Detection of phosphatase activity |
| BS EN ISO 10720:2007 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas |
| BS 6200-3.40.2:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content |
| BS ISO 29841 : 2009 | VEGETABLE FATS AND OILS - DETERMINATION OF THE DEGRADATION PRODUCTS OF CHLOROPHYLLS A AND A' (PHEOPHYTINS A, A' AND PYROPHEOPHYTINS) |
| I.S. EN ISO 17678:2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| PD ISO/TR 22305:2008 | Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| 17/30327456 DC : DRAFT SEP 2017 | BS ISO 20266 - PAINTS AND VARNISHES - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE) |
| BS ISO 13933:2014 | Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method |
| PD CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| BS ISO 8196-3:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Protocol for the evaluation and validation of alternative quantitative methods of milk analysis |
| DIN ISO 17713-1:2007-10 | METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE |
| 08/30179301 DC : DRAFT MAY 2008 | BS EN 15475 - FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| 05/30129856 DC : DRAFT FEB 2005 | ISO 17059 - OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| BS EN ISO 1974:2012 | Paper. Determination of tearing resistance. Elmendorf method |
| DIN EN 15475:2009-04 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| 09/30179503 DC : DRAFT FEB 2009 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN |
| BS EN 15585:2008 | Cereals and cereal products. Durum wheat (T. durum Desf.). Determination of percentage of mitadine grains and calculation of percentage of vitreous grains |
| DIN EN 15517 E : 2008 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF INORGANIC ARSENIC IN SEAWEED BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER ACID EXTRACTION |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| DIN EN ISO 12228-1:2014-10 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| DIN EN 16318 E : 2016 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| 03/303826 DC : DRAFT APR 2003 | BS ISO 13580 - YOGURT - DETERMINATION OF TOTAL SOLIDS CONTENT |
| BS EN ISO 29822:2014 | Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols |
| I.S. EN ISO 6883:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| 15/30281853 DC : 0 | BS EN ISO 18739 - DENTISTRY - VOCABULARY OF PROCESS CHAIN FOR CAD/CAM SYSTEMS |
| BS EN 12390-11:2015 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
| BS ISO 20311:2017 | Traditional Chinese Medicine. Salvia miltiorrhiza seeds and seedlings |
| ISO 10153:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method |
| 16/30310205 DC : 0 | BS ISO 19824 - TRADITIONAL CHINESE MEDICINE - SCHISANDRA CHINENSIS SEEDS AND SEEDLINGS |
| PREN 15550 : DRAFT 2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| I.S. EN ISO 15303:2008 | ANIMAL AND VEGETABLE FATS AND OILS - DETECTION AND IDENTIFICATION OF A VOLATILE ORGANIC CONTAMINANT BY GC/MS |
| DIN EN 16378 E : 2013 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| BS ISO 17129:2006 | Milk and milk products. Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE). Screening method |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| BS EN ISO 12625-16:2015 | Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| UNI EN ISO 21068-1 : 2008 | CHEMICAL ANALYSIS OF SILICON-CARBIDE CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
| BS ISO 18158:2016 | Workplace air. Terminology |
| ISO 29541:2010 | Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method |
| BS ISO 16958:2015 | Milk, milk products, infant formula and adult nutritionals. Determination of fatty acids composition. Capillary gas chromatographic method |
| UNI EN 16278 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
| S.R. CEN/TS 15750:2008 | FERTILIZERS - DETERMINATION OF DIFFERENT FORMS OF NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
| UNI EN 14938-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN ISO 12873 : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY |
| DIN EN 15915 E : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN ISO 16260 E : 2017 | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| 12/30259090 DC : 0 | BS EN 1607 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| BS ISO 14490-8:2011 | Optics and optical instruments. Test methods for telescopic systems Test methods for night-vision devices |
| BS EN ISO 16634-2:2016 | Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Cereals, pulses and milled cereal products |
| 04/30118971 DC : DRAFT DEC 2004 | ISO 20553 - RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL |
| I.S. EN ISO 535:2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| 05/30103535 DC : DRAFT MAY 2005 | ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR |
| UNE-ISO 12192:2017 | Paper and board. Determination of compressive strength. Ring crush method |
| DIN EN 15025:2010-12 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| 08/30174179 DC : DRAFT FEB 2008 | BS EN 15764 - FOODSTUFFS - DETERMINATION OF TIN BY FLAME AND GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (FAAS AND GFAAS) AFTER PRESSURE DIGESTION |
| DD ISO/TS 15338:2009 | Surface chemical analysis. Glow discharge Mass spectrometry (GD-MS). Introduction to use |
| PD ISO/TS 19046-1:2017 | Cheese. Determination of propionic acid level by chromatography Method by gas chromatography |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| I.S. EN 16711-1:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| 06/30148960 DC : DRAFT APR 2006 | ISO 663 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT |
| DIN EN 15477:2015-03 (Draft) | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| BS ISO 8243:2013 | Cigarettes. Sampling |
| BS EN 14938-2:2010 | Copper and copper alloys. Determination of bismuth content Flame atomic absorption spectrometric method (FAAS) |
| 04/30098569 DC : DRAFT SEP 2004 | BS ISO 3750 - ZINC ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DD ISO/TS 17837:2008 | Milk and milk products. Determination of nitrogen content and crude protein calculation. Kjeldahl method |
| BS ISO 7760:2001 | Photography. Processing waste. Determination of hydroquinone |
| S.R. CEN/TR 10345:2013 | GUIDELINE FOR STATISTICAL DATA TREATMENT OF INTER LABORATORY TESTS FOR VALIDATION OF ANALYTICAL METHODS |
| DIN EN 15475 E : 2009 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| BS ISO 11868:2007 | Heat-treated milk. Determination of lactulose content. Method using high-performance liquid chromatography |
| 14/30261900 DC : 0 | BS EN 16711-2 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| BS EN ISO 8534:2017 | Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free) |
| DIN EN 15750 E : 2010 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
| EN ISO 14501:2007 | Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography (ISO 14501:2007) |
| BS ISO 12192:2011 | Paper and board. Determination of compressive strength. Ring crush method |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| DIN EN ISO 12228-1 E : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| PREN 15621 : DRAFT 2016 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| BS ISO 5636-4:2013 | Paper and board. Determination of air permeance (medium range) Sheffield method |
| DIN EN 15905 E : 2010 | FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| 12/30254285 DC : 0 | BS ISO 11816-1 - MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 1: FLUORIMETRIC METHOD FOR MILK AND MILK-BASED DRINKS |
| 14/30293895 DC : 0 | BS ISO 19344 - FERMENTED MILK PRODUCTS - QUANTIFICATION OF LACTIC ACID BACTERIA - FLOW CYTOMETRY METHOD (REFERENCE METHOD) |
| BS EN ISO 22630:2015 | Oilseed meals. Determination of oil content. Rapid extraction method |
| DD CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| 16/30321183 DC | BS ISO 19662. Milk. Determination of fat content. Acido-butyrometric (Gerber method) |
| NF ISO 8196-3 : 2009 | MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 3: PROTOCOL FOR THE EVALUATION AND VALIDATION OF ALTERNATIVE QUANTITATIVE METHODS OF MILK ANALYSIS |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| CR 14061 : 2000 | FERTILIZERS - DETERMINATION OF DUST CONTENT |
| BS EN ISO 5536:2013 | Milk fat products. Determination of water content. Karl Fischer method |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| BS EN ISO 6883:2017 | Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air) |
| 14/30256340 DC : 0 | BS EN ISO 12947-2 - TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN |
| BS ISO 20128:2006 | Milk products. Enumeration of presumptive Lactobacillus acidophilus on a selective medium. Colony-count technique at 37°C |
| 08/30186267 DC : DRAFT JULY 2008 | BS ISO 12873 - DETERMINATION OF WAX CONTENT IN OLIVE OILS BY CAPILLARY COLUMN GAS CHROMATOGRAPHY |
| DIN EN ISO 16014-5:2012-10 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| BS EN 15475:2009 | Fertilizers. Determination of ammoniacal nitrogen |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| DIN EN 16117-1:2011-12 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| BS ISO 5984:2002 | Animal feeding stuffs. Determination of crude ash |
| BS EN 16117-1:2011 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content less than 99,85 % |
| DIN EN ISO 535:2014-06 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| UNI EN ISO 5536 : 2013 | MILK FAT PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| DIN EN 16319:2016-03 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 16024:2011-06 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| 08/30182040 DC : 0 | BS EN ISO 1211 - MILK - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| 09/30210423 DC : 0 | BS EN ISO 15350 - STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| 07/30148167 DC : 0 | BS ISO 5536 - MILK FAT PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| 03/316092 DC : DRAFT SEP 2003 | ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| BS ISO 6571 : 2008 | SPICES, CONDIMENTS AND HERBS - DETERMINATION OF VOLATILE OIL CONTENT (HYDRODISTILLATION METHOD) |
| DIN EN ISO 8534:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (PYRIDINE FREE) (ISO 8534:2017) |
| BS ISO 5636-3:2013 | Paper and board. Determination of air permeance (medium range) Bendtsen method |
| BS ISO 20481:2008 | Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method |
| BS EN ISO 8292-1:2010 | Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR Direct method |
| 17/30367120 DC : 0 | BS EN ISO 17678 - MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| DD CEN/TS 15750:2008 | Fertilizers. Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| UNI EN ISO 17059 : 2009 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| DD CEN/TS 14793:2005 | Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method |
| UNI EN 15690-2 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 07/30161913 DC : 0 | EN 15656 - COPPER AND COPPER ALLOYS - DETERMINATION OF PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD |
| UNI EN 15023-3 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15022-4 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15478 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| UNI EN ISO 12872 : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT |
| BS ISO 17053:2005 | Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas |
| 14/30260117 DC : 0 | BS ISO 6495-1 - ANIMAL FEEDING STUFFS - DETERMINATION OF WATER-SOLUBLE CHLORIDES CONTENT - PART 1: TITRIMETRIC METHOD |
| 09/30194905 DC : 0 | BS EN 15905 - FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| BS ISO 16962:2017 | Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| 18/30334086 DC : DRAFT APR 2018 | BS EN ISO 20896 - DENTISTRY - DIGITAL IMPRESSION DEVICES - METHODS FOR ASSESSING ACCURACY |
| UNI EN 15025 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| PD CEN/TR 16797-2:2015 | Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values Technical and statistical background |
| BS 4401-18:1998 | Methods of test for meat and meat products Determination of starch and glucose contents (enzymatic method) |
| 04/30118507 DC : DRAFT AUG 2004 | EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD |
| BS ISO 15839 : 2003 AMD 16752 | WATER QUALITY - ON-LINE SENSORS/ANALYSING EQUIPMENT FOR WATER - SPECIFICATIONS AND PERFORMANCE TESTS |
| BS PD ISO/TS 21033 : 2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| BS ISO 16700:2004 | Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
| BS ISO 5943:2004 | Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method |
| BS ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials Sampling of particulate materials |
| 04/30114485 DC : DRAFT JUN 2004 | EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD |
| PREN 14984 : DRAFT 2014 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| I.S. EN ISO 22118:2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION AND QUANTIFICATION OF FOOD-BORNE PATHOGENS - PERFORMANCE CHARACTERISTICS |
| BS EN 15170:2008 | Characterization of sludges. Determination of calorific value |
| BS ISO TR 5168:1998 | Measurement of fluid flow. Evaluation of uncertainties |
| I.S. EN ISO 17511:2003 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| BS ISO 8178-2:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
| I.S. EN 15022-4:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN ISO 12099 : 2010 | ANIMAL FEEDING STUFFS, CEREALS AND MILLED CEREAL PRODUCTS - GUIDELINES FOR THE APPLICATION OF NEAR INFRARED SPECTROMETRY |
| ISO 10540-1:2003 | Animal and vegetable fats and oils Determination of phosphorus content Part 1: Colorimetric method |
| XP ISO/TS 15495 : 2010 XP | MILK, MILK PRODUCTS AND INFANT FORMULAE - GUIDELINES FOR THE QUANTITATIVE DETERMINATION OF MELAMINE AND CYANURIC ACID BY LC-MS/MS |
| DIN EN ISO 27107:2010-08 | Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15) |
| UNE-EN ISO 7027-1:2016 | Water quality - Determination of turbidity - Part 1: Quantitative methods (ISO 7027-1:2016) |
| DIN EN 15704 E : 2009 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| DIN EN 15690-2:2009-07 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| UNI CEN/TS 16320 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| UNE-EN ISO 8534:2017 | Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2017) |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| UNE-EN 15750:2010 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| UNI EN 15475 : 2009 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| ISO 23065:2009 | Milk fat from enriched dairy products Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography |
| BS ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results Alternative methods for the determination of the precision of a standard measurement method |
| DIN EN 15170 E : 2009 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| UNI CEN/TR 10345 : 2008 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| ISO 18329:2004 | Milk and milk products — Determination of furosine content — Ion-pair reverse-phase high-performance liquid chromatography method |
| ISO 20266:2018 | Paints and varnishes — Determination of image clarity (degree of sharpness of reflected or transmitted image) |
| UNI EN ISO 12228-1 : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS |
| ISO 13580:2005 | Yogurt — Determination of total solids content (Reference method) |
| ISO/TS 15495:2010 | Milk, milk products and infant formulae Guidelines for the quantitative determination of melamine and cyanuric acid by LC-MS/MS |
| I.S. EN ISO 13468-2:2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| UNI EN 16357 : 2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| ISO 6565:2015 | Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
| UNE-EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
| UNE-ISO 5636-3:2015 | Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method |
| ISO 19730:2008 | Soil quality — Extraction of trace elements from soil using ammonium nitrate solution |
| ISO 6646:2011 | Rice — Determination of the potential milling yield from paddy and from husked rice |
| ISO 19272:2015 | Low alloyed steel Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method) |
| I.S. EN 16317:2013 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| ISO 25705:2016 | Fertilizers Determination of urea condensates using high-performance liquid chromatography (HPLC) Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| CSA Z24511 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| I.S. EN ISO 5529:2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| I.S. CEN TS 15479:2006 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 17713-1:2007 | Meteorology Wind measurements Part 1: Wind tunnel test methods for rotating anemometer performance |
| I.S. EN ISO 2171:2010 | CEREALS, PULSES AND BY-PRODUCTS - DETERMINATION OF ASH YIELD BY INCINERATION |
| ISO 16622:2002 | Meteorology Sonic anemometers/thermometers Acceptance test methods for mean wind measurements |
| UNE-EN ISO 29822:2014 | Vegetable fats and oils - Isomeric diacylglycerols - Determination of relative amounts of 1,2- and 1,3-diacylglycerols (ISO 29822:2009) |
| UNE-EN ISO 12228-2:2015 | Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) |
| UNI EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN ISO 8199:2007 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| BS EN 16317 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| UNI EN ISO 13906 : 2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
| I.S. EN ISO 12625-16:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| AAMI BE83 : 2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| I.S. EN 62321-1:2013 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV)) |
| I.S. EN 15915:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 10351:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| ISO 20481:2008 | Coffee and coffee products — Determination of the caffeine content using high performance liquid chromatography (HPLC) — Reference method |
| I.S. EN ISO 16638-1:2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015) |
| I.S. EN ISO 13473-1:2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| ISO 16260:2016 | Paper and board — Determination of internal bond strength |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| I.S. CEN TS 15022-4:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| ISO 8196-3:2009 | Milk Definition and evaluation of the overall accuracy of alternative methods of milk analysis Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis |
| I.S. EN ISO 18854:2015 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| UNE-EN 16841-1:2017 | Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid method |
| S.R. CEN/TS 16318:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 13843:2017 | Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods |
| UNI CEN ISO/TS 22117 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| ISO 1169:2006 | Zinc alloys Determination of aluminium content Titrimetric method |
| ISO 18158:2016 | Workplace air Terminology |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| ISO 12745:2008 | Copper, lead and zinc ores and concentrates Precision and bias of mass measurement techniques |
| ISO 20128:2006 | Milk products — Enumeration of presumptive Lactobacillus acidophilus on a selective medium — Colony-count technique at 37 degrees C |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS EN ISO 16014-5:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Method using light-scattering detection |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| I.S. EN ISO 17932:2011 | PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (ISO 17932:2011) |
| I.S. EN 62697-1:2012 | TEST METHODS FOR QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN UNUSED AND USED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYLDISULFIDE (DBDS) (IEC 62697-1:2012 (EQV)) |
| I.S. EN ISO 11701:2009 | VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHOLIPIDS CONTENT IN LECITHINS BY HPLC USING A LIGHT-SCATTERING DETECTOR |
| S.R. CEN/TS 15674:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS |
| BIS IS 16179-1 : 2014 | STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES |
| 17/30337117 DC : 0 | BS EN 17212 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BY LIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| PREN 15587 : DRAFT 2016 | CEREAL AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.),TRITICALE (TRITICOSECALE WITTMACK SPP) AND FEED BARLEY (HORDEUM VULGARE L.) |
| BS ISO 20193:2012 | Tobacco and tobacco products. Determination of the width of the strands of cut tobacco |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| I.S. EN 16328:2012 | FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| ISO 29981:2010 | Milk products — Enumeration of presumptive bifidobacteria — Colony count technique at 37 degrees C |
| BS EN ISO 1518-1:2011 | Paints and varnishes. Determination of scratch resistance Constant-loading method |
| UNE-EN 15948:2015 | Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels |
| ISO 29765:2008 | Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces |
| UNE-ISO 8454:2010 | Cigarettes -- Determination of carbon monoxide in the vapour phase of cigarette smoke -- NDIR method. |
| UNI CEN/TS 15705 : 2009 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
| UNI CEN ISO/TS 21268-3 : 2010 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 3: UP-FLOW PERCOLATION TEST |
| UNI EN 15476 : 2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| CEN/TR 16797-2:2015 | Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| I.S. EN ISO 712:2009 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF MOISTURE CONTENT - REFERENCE METHOD |
| ISO 17201-1:2005 | Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement |
| ISO 8124-6:2014 | Safety of toys Part 6: Certain phthalate esters in toys and children's products |
| I.S. EN 15750:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
| ISO/TR 24857:2006 | Synthetic industrial diamond grit products Single-particle compressive failure strength "DiaTest-SI" system |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| ISO 19238:2014 | Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
| I.S. EN 15517:2008 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF INORGANIC ARSENIC IN SEAWEED BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER ACID EXTRACTION |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| ISO 12625-3:2014 | Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
| EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| DIN EN ISO 11816-1:2014-03 | MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 1: FLUORIMETRIC METHOD FOR MILK AND MILK-BASED DRINKS (ISO 11816-1:2013) |
| DIN EN ISO 6885:2016-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
| DIN EN ISO 659 E : 2009 | OILSEEDS - DETERMINATION OF OIL CONTENT (REFERENCE METHOD) |
| DIN EN ISO 22160:2007-08 | MILK AND MILK-BASED DRINKS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - ENZYMATIC PHOTO-ACTIVATED SYSTEM (EPAS) METHOD |
| DIN EN ISO 22174:2005-05 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - GENERAL REQUIREMENTS AND DEFINITIONS |
| DIN EN ISO 658 E : 2002 | OILSEEDS - DETERMINATION OF CONTENT OF IMPURITIES |
| DIN EN 1607:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| DIN EN 14984 E : 2016 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| DIN EN ISO 665 E : 2001 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| DIN EN 12619:2013-04 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN 12697-1 E : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| DIN EN ISO 663 E : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| DIN EN ISO 10519:2015-12 | RAPESEED - DETERMINATION OF CHLOROPHYLL CONTENT - SPECTROMETRIC METHOD (ISO 10519:2015) |
| DIN EN 15510 E : 2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| DIN EN 13130-5:2004-08 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 5: Determination of vinylidene chloride in food simulants |
| UNE-EN 15510:2018 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
| DIN EN ISO 8968-1:2014-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN ISO 6320:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN EN ISO 10993-18:2009-08 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005); German version EN ISO 10993-18:2009 |
| DIN EN ISO 16472:2006-07 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) (ISO 16472:2006) |
| DIN EN 14888 E : 2005 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM CONTENT |
| DIN EN ISO 534 E : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| DIN EN 15360:2007-08 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
| DIN EN 15111 E : 2007 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF IODINE BY ICP-MS (INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY) |
| DIN EN ISO 11378-2:2003-02 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017) |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| DIN EN ISO 11979-3:2013-04 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| UNE-EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| BS EN 14627:2005 | Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
| BS EN 12698-1:2007 | Chemical analysis of nitride bonded silicon carbide refractories Chemical methods |
| BS EN ISO 6865 : 2001 | METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION |
| ISO 13884:2003 | Animal and vegetable fats and oils Determination of isolated trans isomers by infrared spectrometry |
| ISO 15839:2003 | Water quality On-line sensors/analysing equipment for water Specifications and performance tests |
| UNE-EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| BS EN ISO 13468-2:2006 | Plastics. Determination of the total luminous transmittance of transparent materials Double-beam instrument |
| BS EN ISO 734-1:2006 | Oilseed meals. Determination of oil content Extraction method with hexane (or light petroleum) |
| UNE-EN ISO 536:2013 | Paper and board - Determination of grammage (ISO 536:2012) |
| ISO 12228-1:2014 | Determination of individual and total sterols contents Gas chromatographic method Part 1: Animal and vegetable fats and oils |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| BS EN ISO 6867:2001 | Animal feeding stuffs. Determination of vitamin E content. Method using high-performance liquid chromatography |
| BS EN ISO 14637:2006 | Milk. Determination of urea content. Enzymatic method using difference in pH (Reference method) |
| ISO 6865:2000 | Animal feeding stuffs — Determination of crude fibre content — Method with intermediate filtration |
| BS EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| BS EN 13130-8:2004 | Materials and articles in contact with foodstuffs. Plastics substances subject to limitation Determination of isocyanates in plastics |
| ISO 13366-1:2008 | Milk Enumeration of somatic cells Part 1: Microscopic method (Reference method) |
| ISO 6647-2:2015 | Rice Determination of amylose content Part 2: Routine methods |
| ISO 12873:2010 | Olive oils and olive-pomace oils Determination of wax content by capillary gas chromatography |
| BS EN 12441-9:2004 | Zinc and zinc alloys. Chemical analysis Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method |
| UNE-EN 196-2:2014 | Method of testing cement - Part 2: Chemical analysis of cement |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| UNE-EN ISO 663:2017 | Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2017) |
| UNE-EN ISO 12947-2:2017 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| BS EN ISO 20743:2013 | Textiles. Determination of antibacterial activity of textile products |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| UNE-EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
| BS EN ISO 13366-2:2006 | Milk. Enumeration of somatic cells Guidance on the operation of fluoro-opto-electronic counters |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| ISO 10338:1996 | Optics and optical instruments — Contact lenses — Determination of curvature |
| BS EN ISO 2758:2014 | Paper. Determination of bursting strength |
| BS EN 1608:2013 | Thermal insulating products for building applications. Determination of tensile strength parallel to faces |
| BS EN ISO 1735:2004 | Cheese and processed cheese products. Determination of fat content. Gravimetric method (Reference method) |
| BS EN 14941:2006 | Copper and copper alloys. Determination of cobalt content. FAAS method |
| ISO 15310:1999 | Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
| EN ISO 6647-1:2015 | Rice - Determination of amylose content - Part 1: Reference method (ISO 6647-1:2015) |
| EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN ISO 15197:2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| I.S. EN ISO 12625-3:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
| I.S. EN ISO 11816-1:2013 | MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 1: FLUORIMETRIC METHOD FOR MILK AND MILK-BASED DRINKS (ISO 11816-1:2013) |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 2178:2016 | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| I.S. EN ISO 9936:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOCOPHEROL AND TOCOTRIENOL CONTENTS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9936:2016) |
| I.S. EN ISO 9832:2003 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF RESIDUAL TECHNICAL HEXANE CONTENT |
| I.S. EN ISO 12625-7:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| I.S. EN 1109:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURE |
| DIN EN 12390-3:2009-07 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN ISO 6926:2016 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016) |
| DIN EN 1109:2013-07 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURE |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| UNI EN ISO 11691 : 2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
| I.S. EN ISO 5764:2009 | MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
| I.S. EN 10318:2005 | DETERMINATION OF THICKNESS AND CHEMICAL COMPOSITION OF ZINC-AND ALUMINIUM-BASED METALLIC COATINGS - ROUTINE METHOD |
| I.S. EN ISO 13366-2:2006 | MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 16931:2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIACYLGLYCEROLS BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| DIN EN ISO 21872-1:2017-10 | Microbiology of the food chain - Horizontal method for the determination of Vibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO 21872-1:2017) |
| I.S. EN 443:2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| UNI EN ISO 10993-18 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| I.S. EN ISO 6320:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN EN ISO 7932:2005-03 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE ENUMERATION OF PRESUMPTIVE BACILLUS CEREUS - COLONY-COUNT TECHNIQUE AT 30 DEGREE C |
| I.S. EN 826:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
| I.S. EN 15550:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| I.S. EN 13656:2002 | CHARACTERISATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]) AND HYDROCHLORIC (HCI) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| DIN EN 13649:2002-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
| I.S. EN ISO 1211:2010 | MILK - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| I.S. EN 12089:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BENDING BEHAVIOUR |
| DIN EN ISO 6647-2:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS (ISO 6647-2:2015) |
| DIN 10477:2000-08 | Determining the total ash of milk and milk products |
| DIN EN ISO 3727-1:2002-04 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 1: DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| I.S. EN ISO 5983-2:2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 2: BLOCK DIGESTION AND STEAM DISTILLATION METHOD |
| I.S. EN ISO 12947-2:2016 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN (ISO 12947-2:2016) |
| I.S. EN ISO 13366-1:2008 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| I.S. EN ISO 11609:2017 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| UNI EN 12390-7 : 2009 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| I.S. EN ISO 15753:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (ISO 15753:2016) |
| I.S. EN 1607:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| I.S. EN ISO 3037:2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| I.S. EN 14984:2016 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| I.S. EN ISO 11816-2:2016 | MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 2: FLUORIMETRIC METHOD FOR CHEESE (ISO/DIS 11816-2:2014) |
| I.S. EN ISO 6885:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
| I.S. EN ISO 8968-4:2016 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 4: DETERMINATION OF PROTEIN AND NON-PROTEIN NITROGEN CONTENT AND TRUE PROTEIN CONTENT CALCULATION (REFERENCE METHOD) ISO/DIS 8968-4:2013) |
| DIN EN ISO 8968-3:2007-09 | Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) (ISO 8968-3:2004) |
| I.S. EN ISO 3656:2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011) |
| I.S. EN ISO 5943:2006 | CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF CHLORIDE CONTENT - POTENTIOMETRIC TITRATION METHOD |
| I.S. EN ISO 659:2009 | OILSEEDS - DETERMINATION OF OIL CONTENT (REFERENCE METHOD) |
| I.S. EN 1608:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES |
| I.S. EN ISO 12625-6:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
| I.S. EN ISO 14501:2007 | MILK AND MILK POWDER - DETERMINATION OF AFLATOXIN M[1] CONTENT - CLEAN-UP BY IMMUNOAFFINITY CHROMATOGRAPHY AND DETERMINATION BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
| I.S. EN ISO 2758:2014 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| DIN EN ISO 10720:2007-06 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| I.S. EN ISO 2759:2014 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| DIN EN ISO 182-4:2001-02 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD |
| DIN EN ISO 13366-1:2008-06 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| DIN EN ISO 11543:2002-06 | MODIFIED STARCH - DETERMINATION OF HYDROXYPROPYL CONTENT - METHOD USING PROTON NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRY |
| I.S. EN ISO 9614-3:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| DIN EN ISO 4625-2:2006-04 | Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004) |
| I.S. EN 1097-9:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| I.S. EN 196-2:2013 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| I.S. EN 14524:2004 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
| DIN EN 196-2:2013-10 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| I.S. EN ISO 8968-1:2014 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN ISO 4625-1:2006-04 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| I.S. EN ISO 662:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT (ISO 662:2016) |
| DIN EN ISO 24276:2013-10 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS (ISO 24276:2006 + AMD 1:2013) |
| I.S. EN ISO 534:2011 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| I.S. EN ISO 10519:2015 | RAPESEED - DETERMINATION OF CHOLOROPHYLL CONTENT SPECTROMETRIC METHOD (ISO 10519:2015) |
| DIN EN ISO 3727-2:2002-04 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 2: DETERMINATION OF NON-FAT SOLIDS CONTENT (REFERENCE METHOD) |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| I.S. EN ISO 11979-3:2012 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| DIN EN ISO 6647-1:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD (ISO 6647-1:2015) |
| I.S. EN ISO 663:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| DIN EN 12441-10:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| UNI EN ISO 11689 : 1998 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| UNI EN ISO 21570 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| BS 4401-1:1998 | Methods of test for meat and meat products Determination of total ash |
| BS 684-1.1:2000 | Methods of analysis of fats and fatty oils. Physical methods Determination of litre weight in air |
| BS 684-1.14:1998 | Methods of analysis of fats and fatty oils. Physical methods Determination of Lovibond colour |
| BS 2782-9 Method 910A:1996 | Methods of testing plastics. Sampling and test specimen preparation Injection moulding test specimens of thermoplastic materials |
| VDI 3958 Blatt 12:2004-02 | Environmental simulation - Effects of acidic precipitation on polymers - Test methods |
| BS 684-1.3(2002) : 2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MELTING POINT IN OPEN CAPILLARY TUBES (SLIP POINT) |
| DIN EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| BS 4401-3:1997 | Methods of test for meat and meat products Determination of moisture content (reference method) |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| BS 4401-6:1996 | Methods of test for meat and meat products Determination of chloride content (Volhard method) |
| BIS IS 15393-5 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| BS 3156-11.1.2(1997) : 1997 AMD 16104 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - HYDROCARBONS AND INERT GASES - EXTENDED ANALYSIS BY GAS CHROMATOGRAPHIC METHOD |
| BS 770-7:1997 | Methods for chemical analysis of cheese Determination of citric acid content of cheese and processed cheese products (enzymatic method) |
| BS 684-1.2(2000) : 2000 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX |
| BS 684-2.14:2001 | Methods of analysis of fats and fatty oils. Other methods Determination of peroxide value |
| BS 5381-5:2002 | Methods for determination of physical properties of tobacco and tobacco products Draw resistance of cigarettes and pressure drop of filter rods |
| I.S. EN ISO 8655-1:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
| BS 1743-11(2000) : 2000 | DRIED MILK AND DRIED MILK PRODUCTS - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| VDI 3786 Blatt 19:2016-10 (Draft) | Environmental meteorology - Ground-based remote sensing of meteorological parameters - Particle backscatter lidar |
| BS 2782-5.531A(1999) : 1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| VDE 0370-16 : 1999 | INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| BS 6043-1.6:1998 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch Determination of coking value - Section 1.6 Determination of coking value |
| BS EN 62321-1:2013 | Determination of certain substances in electrotechnical products Introduction and overview |
| ISO 17239:2004 | Fruits, vegetables and derived products Determination of arsenic content Method using hydride generation atomic absorption spectrometry |
| UNE-EN ISO 27107:2010 | Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15) |
| PREN ISO 1211 : DRAFT 2008 | MILK - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| DIN EN ISO 16050:2011-09 | Foodstuffs - Determination of aflatoxin B<(Index)1>, and the total content of aflatoxins B<(Index)1>, B<(Index)2>, G<(Index)1> and G<(Index)2> in cereals, nuts and derived products - High performance liquid chromatographic method (ISO 16050:2003); German version EN ISO 16050:2011 |
| DIN EN ISO 12228-2 E : 2015 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 2: OLIVE AND OLIVE POMACE OILS (ISO 12228-2:2014) |
| 16/30310662 DC : 0 | BS EN ISO 18369-3 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| BS ISO 5636-5:2013 | Paper and board. Determination of air permeance (medium range) Gurley method |
| BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
| DIN ISO 6673 E : 2007 | GREEN COFFEE - DETERMINATION OF LOSS IN MASS AT 105 DEGREES C |
| S.R. CEN ISO TS 22117:2010 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| I.S. CEN/TS 15439:2006 | BIOMASS GASIFICATION - TAR AND PARTICLES IN PRODUCT GASES - SAMPLING AND ANALYSIS |
| 17/30346182 DC : 0 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
| ISO 16638-1:2015 | Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds |
| I.S. EN 16075:2011 | FERTILIZERS - DETERMINATION OF N-(2-NITROPHENYL)PHOSPHORIC TRIAMIDE (2-NPT) IN UREA AND FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| I.S. CWA 15261-2:2005 | MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
| 07/30148930 DC : 0 | BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| BS ISO 15885:2002 | Milk fat. Determination of fatty acid composition by gas-liquid chromatography |
| DIN EN ISO 535 E : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| DIN EN ISO 12779 E : 2013 | LACTOSE - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 12779:2011) |
| BS ISO 35103:2017 | Petroleum and natural gas industries. Arctic operations. Environmental monitoring |
| PD CEN/TS 16317:2012 | Fertilizers. Determination of trace elements. Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| BS ISO 3976:2006 | Milk fat. Determination of peroxide value |
| BS ISO 17932 : 2005 AMD 17392 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) |
| PREN 15305 : DRAFT 2005 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| 02/122893 DC : DRAFT JULY 2002 | BS EN ISO 6271-2 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART 2: SPECTROPHOTOMETRIC METHOD |
| ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
| UNI CEN/TS 15916-1 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 18787:2017 | Foodstuffs — Determination of water activity |
| UNI EN 15704 : 2009 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| ISO 12080-1:2009 | Dried skimmed milk Determination of vitamin A content Part 1: Colorimetric method |
| 04/30126306 DC : DRAFT DEC 2004 | ISO 23058 - MILK AND MILK PRODUCTS - OVINE AND CAPRINE RENNETS - DETERMINATION OF TOTAL MILK-CLOTTING ACTIVITY |
| BS ISO 26323:2009 | Milk products. Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH) |
| 06/30159524 DC : 0 | BS EN ISO 12625-10 - TISSUE PAPER AND TISSUE PRODUCTS - PART 10: DETERMINATION OF DEMAND WATER ABSORPTION RATE AND CAPACITY, UNDER CONTROLLED HYDRAULIC PRESSURE |
| 12/30256817 DC : 0 | BS EN 16378 - CEREALS - DETERMINATION OF BESATZ IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| DIN EN 16841-1 E : 2017 | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| BIS IS 16086 : 2013 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| I.S. EN 16320:2013 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 15621:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| 12/30255965 DC : DRAFT SEP 2012 | BS EN ISO 12228-2 - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - OLIVE AND OLIVE POMACE OILS |
| DIN EN ISO 1974:2012-09 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| BS ISO 6721-10:2015 | Plastics. Determination of dynamic mechanical properties Complex shear viscosity using a parallel-plate oscillatory rheometer |
| I.S. EN 15690-2:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30126695 DC : DRAFT DEC 2004 | ISO 5550 - CASEINS AND CASEINATES - DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| 04/30114461 DC : DRAFT JUN 2004 | EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD |
| DD ISO/TS 27265:2009 | Dried milk. Enumeration of the specially thermoresistant spores of thermophilic bacteria |
| 07/30131009 DC : 0 | BS ISO 22935-3 - MILK AND MILK PRODUCTS - SENSORY ANALYSIS - PART 3: EVALUATION OF COMPLIANCE WITH PRODUCT SPECIFICATIONS FOR SENSORY PROPERTIES BY SCORING |
| I.S. EN ISO 5536:2013 | MILK FAT PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 5536:2009) |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| BS ISO 29581-2:2010 | Cement. Test methods Chemical analysis by X-ray fluorescence |
| 04/19973037 DC : DRAFT OCT 2004 | BS EN 1330-11 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 11: X-RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS |
| 04/30114473 DC : DRAFT JUN 2004 | EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD |
| BS ISO 17780:2015 | Animal and vegetable fats and oils. Determination of aliphatic hydrocarbons in vegetable oils |
| 04/30114479 DC : DRAFT JUN 2004 | EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD |
| 03/305268 DC : DRAFT APR 2003 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) FOR THE DETERMINATION OF ELEMENTS - PART 1: GENERAL GUIDELINES AND BASIC PRINCIPLES |
| BS ISO 28218:2010 | Radiation protection. Performance criteria for radiobioassay |
| 04/30069011 DC : DRAFT FEB 2004 | ISO/DIS 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES |
| BS EN ISO 12873:2014 | Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography |
| 08/30179304 DC : DRAFT MAY 2008 | BS EN 15476 - FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| BS ISO 5636-6:2015 | Paper and board. Determination of air permeance (medium range) Oken method |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| I.S. EN ISO 12228:1999 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD |
| BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
| BS EN 15616:2012 | Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS) |
| BS ISO 6853:2001 | Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method) |
| UNI EN 15916-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN ISO 16297:2014 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| 07/30142481 DC : 0 | BS ISO 24557 - PULSES - DETERMINATION OF MOISTURE CONTENT - AIR-OVEN METHOD |
| BS ISO 6926 : 99 AMD 13404 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES FOR THE DETERMINATION OF SOUND POWER LEVELS |
| ISO 10540-2:2003 | Animal and vegetable fats and oils Determination of phosphorus content Part 2: Method using graphite furnace atomic absorption spectrometry |
| PREN 826 : DRAFT 2012 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
| BS ISO 10932:2010 | Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) |
| 02/123043 DC : DRAFT JULY 2002 | BS EN ISO 4630-2 - CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 2: SPECTROPHOTOMETRIC METHOD |
| I.S. EN 13130-2:2004 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS SUBSTANCES SUBJECT TO LIMITATION - PART 2: DETERMINATION OF TEREPHTHALIC ACID IN FOOD SIMULANTS |
| BS ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| BS ISO 24557:2009 | Pulses. Determination of moisture content. Air-oven method |
| DIN EN 15705:2010-07 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B); German version EN 15705:2010 |
| UNE-ISO 5636-5:2015 | Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
| 05/30138782 DC : DRAFT SEP 2005 | ISO 9233-2 - CHEESE AND CHEESE RIND - DETERMINATION OF NATAMYCIN CONTENT - PART 2: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY FOR CHEESE, CHEESE RIND AND PROCESSED CHEESE |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| 09/30196088 DC : 0 | BS ISO 27608 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF LOVIBOND COLOUR - AUTOMATIC METHOD |
| ISO 20938:2008 | Instant coffee — Determination of moisture content — Karl Fischer method (Reference method) |
| BS ISO 10540-3:2002 | Animal and vegetable fats and oils. Determination of phosphorus content Method using inductively coupled plasma (ICP) optical emission spectroscopy |
| 03/301010 DC : DRAFT FEB 2003 | ISO 18329 - MILK AND MILK PRODUCTS - DETERMINATION OF FUROSINE CONTENT - ION-PAIR REVERSE-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY METHOD |
| BS EN 62697-1:2012 | Test methods for quantitative determination of corrosive sulphur compounds in unused and used insulating liquids Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| I.S. EN ISO 8968-5:2002 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 5: DETERMINATION OF PROTEIN-NITROGEN CONTENT |
| BS ISO 13885-1:2008 | Binders for paints and varnishes. Gel permeation chromatography (GPC) Tetrahydrofuran (THF) as eluent |
| ISO/TS 14167:2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| BS ISO 6673:2003 | Green coffee. Determination of loss in mass at 105°C |
| I.S. EN 13130-5:2004 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS SUBSTANCES SUBJECT TO LIMITATION - PART 5: DETERMINATION OF VINYLIDENE CHLORIDE IN FOOD SIMULANTS |
| DIN EN 15170:2009-05 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| I.S. EN 15705:2010 | FERTILIZERS - DETERMINATION OF UREA CONDENSATES USING HIGHPERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) - ISOBUTYLIDENEDIUREA AND CROTONYLIDENEDIUREA (METHOD A) AND METHYLEN-UREA OLIGOMERS (METHOD B) |
| ISO 22662:2007 | Milk and milk products — Determination of lactose content by high-performance liquid chromatography (Reference method) |
| 11/30216364 DC : 0 | BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) |
| 08/30179310 DC : DRAFT MAY 2008 | BS EN 15478 - FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| NF EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 14/30288021 DC : 0 | BS EN ISO 11085 - CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD |
| DIN EN 15842 E : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| I.S. EN ISO 22160:2007 | MILK AND MILK-BASED DRINKS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - ENZYMATIC PHOTO-ACTIVATED SYSTEM (EPAS) METHOD |
| DIN EN 15764:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| UNE-EN ISO 3960:2017 | Animal and vegetable fats and oils - Determination of peroxide value - Iodometric (visual) endpoint determination (ISO 3960:2017) |
| DD CEN/TS 15478:2006 | Fertilizers. Determination of total nitrogen in urea |
| 11/30228380 DC : 0 | BS ISO 16297 - MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS |
| BS EN 15428:2007 | Soil improvers and growing media. Determination of particle size distribution |
| BS EN 16279:2012 | Animal feeding stuffs. Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) |
| UNE-EN 15764:2010 | Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| 05/30057945 DC : DRAFT APR 2005 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| 11/30199737 DC : 0 | BS EN 16278 - ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION BY ATOMIC ABSORPTION SPECTROMETRY AFTER MICROWAVE EXTRACTION |
| BS ISO 7889:2003 | Yogurt. Enumeration of characteristic microorganisms. Colony-count technique at 37 °C |
| UNI EN ISO 12999-1 : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| BS ISO 29541:2010 | Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method |
| PREN 15510 : DRAFT 2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| UNI EN 15749 : 2009 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| BS EN ISO 16050:2011 | Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High-performance liquid chromatographic method |
| BS ISO 3356:2009 | Milk. Determination of alkaline phosphatase |
| 11/30196205 DC : 0 | BS ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR (DIFFUSE REFLECTANCE FACTOR) |
| 13/30258434 DC : 0 | BS ISO 8968-1 - MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT AND CRUDE PROTEIN CALCULATION - PART 1: KJELDAHL PRINCIPLE |
| UNI CEN/TS 16375 : 2013 | LIMING MATERIALS - DETERMINATION OF THE AMOUNT OF RESIDUAL FINELY GROUND CARBONATE IN SOILS - VOLUMETRIC METHOD |
| PD CEN/TS 16320:2012 | Fertilizers. Determination of trace elements. Determination of mercury by vapour generation (VG) after aqua regia dissolution |
| BS ISO 19824:2017 | Traditional Chinese medicine. <i>Schisandra</i> <i>chinensis</i> (Turcz.) Baill. seeds and seedlings |
| BS EN 16357:2013 | Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid |
| BS EN 15764:2009 | Foodstuffs. Determination of trace elements. Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| PD ISO/TS 17193:2011 | Milk. Determination of the lactoperoxidase activity. Photometric method (Reference method) |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| DIN EN 15750:2010-02 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| 09/30210254 DC : DRAFT DEC 2009 | BS EN 16023 - CHARACTERIZATION OF WASTE - DETERMINATION OF CALORIFIC VALUE |
| BS ISO 16297 : 2013 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| BS ISO 4625-2 : 2004 AMD 16195 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 2: CUP-AND-BALL METHOD |
| 17/30356304 DC : 0 | BS ISO 21160 - CIGARETTES - DETERMINATION OF SELECTED CARBONYLS IN THE MAINSTREAM SMOKE OF CIGARETTES - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| ISO/TS 17837:2008 | Processed cheese products Determination of nitrogen content and crude protein calculation Kjeldahl method |
| UNI EN 15622 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15750 : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| 17/30358420 DC : 0 | BS ISO 22146 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| BS ISO/TR 11696-1:1999 | Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products |
| 17/30356310 DC : 0 | BS ISO 21330 - CIGARETTES - DETERMINATION OF SELECTED VOLATILE ORGANIC COMPOUNDS IN THE MAINSTREAM SMOKE OF CIGARETTES - METHOD USING GC/MS |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| BS ISO 8178-1:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
| DIN EN ISO 712 E : 2010 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF MOISTURE CONTENT - REFERENCE METHOD |
| DIN EN ISO 22118:2011-11 | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics (ISO 22118:2011) |
| 14/30278133 DC : DRAFT OCT 2014 | BS EN ISO 7027-1 - WATER QUALITY - DETERMINATION OF TURBIDITY - PART 1: QUANTITATIVE METHODS |
| BS ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method |
| UNE-EN 15690-2:2010 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| ISO 17678:2010 | Milk and milk products Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) |
| DIN EN ISO 29822:2014-07 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| ISO 10932:2010 | Milk and milk products — Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) |
| 13/30276249 DC : 0 | BS EN 16320 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 16317:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| BS 5766-19:2000 | Methods for analysis of animal feeding stuffs Determination of starch content. Polarimetric method |
| 04/30107827 DC : DRAFT JAN 2004 | ISO 17925 - ZINC AND/OR ALUMINIUM BASED COATINGS ON STEEL - DETERMINATION OF MASS PER UNIT AREA AND CHEMICAL COMPOSITION - GRAVIMETRY, INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY AND FLAME ATOMIC ABSORPTION SPECTROMETRY |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| BS ISO 4625-1 : 2004 AMD 16196 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| BS EN 16711-1:2015 | Textiles. Determination of metal content Determination of metals using microwave digestion |
| BS EN ISO 11701:2009 | Vegetable fats and oils. Determination of phospholipids content in lecithins by HPLC using a light-scattering detector |
| DIN 33897-1:2016-08 | WORKPLACE ATMOSPHERES - ROUTINE METHODS FOR THE DETERMINATION OF THE DUSTINESS OF BULK MATERIALS - PART 1: BASICS |
| UNI EN 15605 : 2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| PREN 17212 : DRAFT 2017 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALSYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BYLIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| DIN ISO 22935-3:2012-12 | Milk and milk products - Sensory analysis - Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring (ISO 22935-3:2009) |
| BS ISO 12872 : 2010 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT |
| 07/30165909 DC : 0 | BS ISO 29581-2 - METHODS OF TESTING CEMENT - CHEMICAL ANALYSIS OF CEMENT - PART 2: ANALYSIS BY X-RAY FLUORESCENCE |
| 06/30136455 DC : 0 | ISO 7302 - CEREALS AND CEREAL PRODUCTS - DETERMINATION OF TOTAL FAT CONTENT |
| BS ISO 1740:2004 | Milkfat products and butter. Determination of fat acidity (reference method) |
| 12/30213199 DC : 0 | BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| DIN EN ISO 21872-1 E : 2017 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE DETERMINATION OF VIBRIO SPP. - PART 1: DETECTION OF POTENTIALLY ENTEROPATHOGENIC VIBRIO PARAHAEMOLYTICUS, VIBRIO CHOLERAE AND VIBRIO VULNIFICUS (ISO 21872-1:2017) |
| 07/30113186 DC : 0 | BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
| BS ISO 17217-1:2014 | Traditional Chinese medicine. Ginseng seeds and seedlings Panax ginseng C.A. Meyer |
| BS ISO 19344:2015 | Milk and milk products. Starter cultures, probiotics and fermented products. Quantification of lactic acid bacteria by flow cytometry |
| BS ISO 16578:2013 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences |
| BS ISO 2493-2:2011 | Paper and board. Determination of bending resistance Taber-type tester |
| 12/30267867 DC : 0 | BS EN 1109 - FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURE |
| 12/30246278 DC : 0 | BS EN ISO 21569:2005/AMD 1 - FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS |
| UNE-EN 15916-2:2011 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| NF ISO 19983 : 2017 | RUBBER - DETERMINATION OF PRECISION OF TEST METHODS |
| BS EN 10355:2013 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| BS ISO 11813:2010 | Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method |
| BS ISO 20938:2008 | Instant coffee. Determination of moisture content. Karl Fischer method (Reference method) |
| BS ISO 12828-1:2011 | Validation method for fire gas analysis Limits of detection and quantification |
| BS ISO 12787:2011 | Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques |
| BIS IS 7920-1 : 2012(R2017) | STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY |
| BS ISO 22891:2013 | Paper. Determination of transmittance by diffuse reflectance measurement |
| UNE-CEN/TS 15916-1:2012 EX | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| 13/30277131 DC : 0 | BS EN 16319 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 16075:2012-01 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatographie (HPLC) |
| S.R. CEN TS 15605:2007 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| DIN EN 15305:2009-01 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| UNE-EN 15705:2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| 14/30293328 DC : 0 | BS ISO 27105 - MILK AND CHEESE - DETERMINATION OF HEN'S EGG WHITE LYSOZYME CONTENT BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| BS ISO 3890-1:2009 | Milk and milk products. Determination of residues of organochlorine compounds (pesticides) General considerations and extraction methods |
| DIN EN 15479:2009-04 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| 17/30328289 DC : 0 | BS ISO 11843-7 - CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| 13/30276853 DC : 0 | BS EN 16318 - FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM (6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| BS ISO 18145:2003 | Environmental tobacco smoke. Determination of vapour phase nicotine and 3-ethenylpyridine in air. Gas chromatographic method |
| UNE-EN ISO 18854:2015 | Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| DD CEN/TS 15439:2006 | Biomass gasification. Tar and particles in product gases. Sampling and analysis |
| ISO 10540-3:2002 | Animal and vegetable fats and oils — Determination of phosphorus content — Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy |
| 03/303827 DC : DRAFT APR 2003 | ISO/DIS 15648 - BUTTER - DETERMINATION OF SALT CONTENT - POTENTIOMETRIC METHOD |
| UNE-EN ISO 3035:2012 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| BS 5766-17:1999 | Methods for analysis of animal feeding stuffs Determination of furazolidone content. Method using high-performance liquid chromatography |
| DD CEN/TS 15674:2007 | Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods |
| BS EN ISO 734:2015 | Oilseed meals. Determination of oil content. Extraction method with hexane (or light petroleum) |
| UNI EN ISO 27107 : 2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - POTENTIOMETRIC END-POINT DETERMINATION |
| BS EN ISO 15351:2010 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| 99/565449 DC : DRAFT OCT 99 | DRAFT BS EN 13725 - AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OFFACTOMETRY |
| 00/564095 DC : 0 | ISO/DIS 16622 - METROLOGY - SONIC ANEMOMETERS/THERMOMETERS - ACCEPTANCE TEST METHODS FOR MEAN WIND MEASUREMENTS |
| DD ISO/TS 21098:2005 | Foodstuffs. Nucleic acid based methods of analysis of genetically modified organisms and derived products. Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 and ISO 21571 |
| BS EN ISO 8199:2007 | Water quality. General guidance on the enumeration of micro-organisms by culture |
| 06/30156520 DC : DRAFT SEP 2006 | BS ISO 22197-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - REMOVAL OF NITRIC OXIDE |
| DD CEN/TS 15025:2006 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS) |
| 10/30196570 DC : 0 | BS ISO 6565 - TOBACCO AND TOBACCO PRODUCTS - DRAW RESISTANCE OF CIGARETTES AND PRESSURE DROP OF FILTER RODS - STANDARD CONDITIONS AND MEASUREMENT |
| BS EN 15476:2009 | Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda |
| BS ISO 13909-1:2016 | Hard coal and coke. Mechanical sampling General introduction |
| ISO 22891:2013 | Paper — Determination of transmittance by diffuse reflectance measurement |
| BS EN 15022-4:2011 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometric method (FAAS) |
| 09/30191924 DC : 0 | BS ISO 16014-5 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: LIGHT-SCATTERING METHOD |
| UNE-EN ISO 16638-1:2018 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| UNE-EN ISO 712:2010 | Cereals and cereal products - Determination of moisture content - Reference method (ISO 712:2009) |
| BS 5766-22:2001 | Methods for analysis of animal feeding stuffs Determination of residues of organochlorine pesticides. Gas chromatographic method |
| 07/30166049 DC : 0 | BS EN 15703-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| DIN 10377:2003-10 | TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF PRESERVING AGENTS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| UNI EN ISO 22959 : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS BY ON-LINE DONOR-ACCEPTOR COMPLEX CHROMATOGRAPHY AND HPLC WITH FLUORESCENCE DETECTION |
| BS ISO 6883 : 2007 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) |
| BS EN 15765:2009 | Foodstuffs. Determination of trace elements. Determination of tin by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion |
| I.S. EN ISO 18739:2016 | DENTISTRY - VOCABULARY OF PROCESS CHAIN FOR CAD/CAM SYSTEMS (ISO 18739:2016) |
| 05/30127853 DC : DRAFT JAN 2005 | ISO 16472 - ANIMAL FEEDING STUFFS - DETERMINATION OF AMYLASE-TREATED NEUTRAL DETERGENT FIBRE CONTENT (ANDF) |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS ISO 15323:2002 | Dried milk protein products. Determination of nitrogen solubility index |
| UNI EN ISO 12779 : 2013 | LACTOSE - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 20289:2018 | Surface chemical analysis. Total reflection X-ray fluorescence analysis of water |
| 07/30148164 DC : DRAFT AUG 2007 | BS ISO 5764 - MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
| BS ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| DIN EN 16487 E : 2015 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| BS ISO 19730:2008 | Soil quality. Extraction of trace elements from soil using ammonium nitrate solution |
| ISO 11435:2011 | Nickel alloys Determination of molybdenum content Inductively coupled plasma/atomic emission spectrometric method |
| DIN EN 15477 E : 2009 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| BS EN ISO 12228-1:2014 | Determination of individual and total sterols contents. Gas chromatographic method Animal and vegetable fats and oils |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS ISO 13875:2005 | Liquid milk. Determination of acid-soluble β-lactoglobulin content. Reverse-phase HPLC method |
| ISO 26642:2010 | Food products Determination of the glycaemic index (GI) and recommendation for food classification |
| BS EN 14865-1 : 2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| 02/706744 DC : DRAFT MAY 2002 | ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| 17/30345947 DC : 0 | BS EN ISO 21083-1 - TEST METHOD TO MEASURE THE EFFICIENCY OF AIR FILTRATION MEDIA AGAINST SPHERICAL NANOMATERIALS - PART 1: PARTICLE SIZE RANGE FROM 20 TO 500 NM |
| 08/30190491 DC : 0 | BS ISO 11702 - ANIMAL AND VEGETABLE FATS AND OILS - ENZYMATIC DETERMINATION OF TOTAL STEROLS CONTENT |
| BS ISO 3039:2010 | Corrugated fibreboard. Determination of grammage of the component papers after separation |
| 07/30130997 DC : 0 | BS ISO 23065 - MILK FAT FROM ENRICHED DAIRY PRODUCTS - DETERMINATION OF OMEGA-3 AND OMEGA-6 FATTY ACID CONTENT BY GAS-LIQUID CHROMATOGRAPHY |
| 01/560538 DC : DRAFT FEB 2001 | ISO/DIS 11222 - AIR QUALITY - DETERMINATION OF THE UNCERTAINTY OF THE TIME AVERAGE OF AIR QUALITY MEASUREMENTS |
| EN ISO 20743:2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| DD CEN/TS 15401:2010 | Solid recovered fuels. Determination of bulk density |
| BS ISO 6561-2:2005 | Fruits, vegetables and derived products. Determination of cadmium content Method using flame atomic absorption spectrometry |
| BS EN 15517:2008 | Foodstuffs. Determination of trace elements. Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction |
| 02/706195 DC : DRAFT JUN 2002 | ISO/DIS 22174 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - GENERAL METHOD SPECIFIC REQUIREMENTS |
| 09/30174467 DC : 0 | BS EN 62563-1 - MEDICAL ELECTRICAL EQUIPMENT - MEDICAL IMAGE DISPLAY SYSTEMS - PART 1: EVALUATION METHODS |
| UNE-EN 15909:2011 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
| BS ISO/IEC TR 13233:1995 | Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services |
| UNE-EN 15915:2011 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| UNE-ISO 3039:2013 | Corrugated fibreboard. Determination of the grammage of the component papers after separation |
| BS ISO 22662:2007 | Milk and milk products. Determination of lactose content by high-performance liquid chromatography (Reference method) |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| DIN EN 16320 E : 2017 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| UNI ISO 11648-2 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS |
| DIN EN 10355:2013-11 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| ISO 3750:2006 | Zinc alloys Determination of magnesium content Flame atomic absorption spectrometric method |
| PREN ISO 3037 : DRAFT 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013) |
| DIN 10763:2004-06 | Analysis of honey - Determination of glycerol content - Enzymatic method |
| I.S. EN 15909:2010 | FERTILIZERS - DETERMINATION OF CALCIUM AND FORMATE IN CALCIUM FOLIAR FERTILIZERS |
| UNE-EN ISO 22118:2011 | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics (ISO 22118:2011) |
| BS ISO 20408:2017 | Traditional Chinese medicine. Panax notoginseng seeds and seedlings |
| UNE-EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| S.R. CEN/TR 16797-2:2015 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE STATISTICAL ASSESSMENT OF DECLARED VALUES - PART 2: TECHNICAL AND STATISTICAL BACKGROUND |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
| ISO 3890-1:2009 | Milk and milk products Determination of residues of organochlorine compounds (pesticides) Part 1: General considerations and extraction methods |
| DIN EN 16278:2012-09 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
| ISO 13875:2005 | Liquid milk Determination of acid-soluble beta-lactoglobulin content Reverse-phase HPLC method |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI EN ISO 1974 : 2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD |
| S.R. CEN/TS 16319:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 10355 E : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| I.S. EN 15905:2010 | FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| GOST R ISO 13493 : 2005 | MEAT AND MEAT PRODUCTS - METHOD FOR DETERMINATION OF CHLORAMPHENICOL CONTENT USING LIQUID CHROMATOGRAPHY |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
| CSA Z24511 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| ISO 13885-1:2008 | Binders for paints and varnishes Gel permeation chromatography (GPC) Part 1: Tetrahydrofuran (THF) as eluent |
| EN ISO 20553:2017 | Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006) |
| S.R. CEN ISO TS 16634-2:2009 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 2: CEREALS, PULSES AND MILLED CEREAL PRODUCTS |
| ISO 35103:2017 | Petroleum and natural gas industries — Arctic operations — Environmental monitoring |
| UNI EN 15477 : 2009 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| I.S. EN 16319:2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| I.S. EN ISO 13843:2017 | WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017) |
| I.S. EN 15477:2009 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| I.S. EN 12390-11:2015 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| I.S. EN 16279:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF FLUORIDE CONTENT AFTER HYDROCHLORIC ACID TREATMENT BY ION-SENSITIVE ELECTRODE METHOD (ISE) |
| I.S. EN ISO 29822:2014 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| S.R. CEN TS 15401:2010 | SOLID RECOVERED FUELS - DETERMINATION OF BULK DENSITY |
| S.R. CEN/TS 16023:2013 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| NF ISO 8196-1 : 2009 | MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 1: ANALYTICAL ATTRIBUTES OF ALTERNATIVE METHODS |
| UNI ISO 20553 : 2009 | RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL |
| ISO 16305:2005 | Butter — Determination of firmness |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| S.R. CEN ISO TS 21268-3:2009 | SOIL QUALITY - LEACHING PROCEDURES FOR SUBSEQUENT CHEMICAL AND ECOTOXICOLOGICAL TESTING OF SOIL AND SOIL MATERIALS - PART 3: UP-FLOW PERCOLATION TEST |
| I.S. EN 15916-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| S.R. CR 10299:1999 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTINE METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| ISO 14380:2011 | Water quality — Determination of the acute toxicity to Thamnocephalus platyurus (Crustacea, Anostraca) |
| I.S. CEN TS 15025:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DD ISO/TS 11869:2012 | Fermented milks. Determination of titratable acidity. Potentiometric method |
| ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| I.S. EN 15587:2008 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| ISO 5636-4:2013 | Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
| BS ISO 12871:2010 | Olive oils and olive-pomace oils. Determination of aliphatic alcohols content by capillary gas chromatography |
| ISO 18862:2016 | Coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization |
| ISO 27608:2010 | Animal and vegetable fats and oils Determination of Lovibond colour Automatic method |
| I.S. CEN TS 15023-3:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN ISO 8199:2008-01 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| ONORM EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| UNE-ISO 15593:2010 | Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence |
| UNE-EN 10355:2014 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| I.S. EN ISO 16014-5:2012 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| UNE-EN 14938-2:2012 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| ISO 5738:2004 | Milk and milk products Determination of copper content Photometric method (Reference method) |
| ISO 25475:2016 | Fertilizers Determination of ammoniacal nitrogen |
| EN ISO 3960:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - IODOMETRIC (VISUAL) ENDPOINT DETERMINATION (ISO 3960:2017) |
| I.S. EN ISO 11702:2016 | ANIMAL AND VEGETABLE FATS AND OILS - ENZYMATIC DETERMINATION OF TOTAL STEROLS CONTENT |
| BS ISO 5536 : 2009 | MILK FAT PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
| DD ISO/TS 21033 : 2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| UNI EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD |
| S.R. CEN TS 15749:2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| UNE 34903:2014 | Cereals and cereal products. Determination of triticum durum quality using a sedimentation test method in a sodium dodecyl sulphate (SDS) solution. |
| IWA 8:2009 | Tableware, giftware, jewellery, luminaries Glass clarity Classification and test method |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| ISO 21033:2016 | Animal and vegetable fats and oils Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| I.S. EN 10361:2015 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| ISO 5530-4:2002 | Wheat flour (Triticum aestivum L.) Physical characteristics of doughs Part 4: Determination of rheological properties using an alveograph |
| I.S. EN ISO 5530-1:2014 | WHEAT FLOUR - PHYSICAL CHARACTERISTICS OF DOUGHS - PART 1: DETERMINATION OF WATER ABSORPTION AND RHEOLOGICAL PROPERTIES USING A FARINOGRAPH (ISO 5530-1:2013) |
| BS EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles Determination of mean profile depth |
| UNE-EN 15749:2010 | Fertilizers - Determination of sulfates content using three different methods |
| DIN EN ISO 13473-1:2004-07 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997) |
| UNI ISO/TS 17837 : 2013 | PROCESSED CHEESE PRODUCTS - DETERMINATION OF NITROGEN CONTENT AND CRUDE PROTEIN CALCULATION - KJELDAHL METHOD |
| UNI EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| UNE-EN 16711-2:2016 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| UNI EN ISO 16050 : 2011 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B1, AND THE TOTAL CONTENT OF AFLATOXINS B1, B2, G1 AND G2 IN CEREALS, NUTS AND DERIVED PRODUCTS - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
| UNE-ISO 15592-1:2012 | Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 1: Sampling |
| IPC TM 650-MDP : 2012 | IPC TEST METHOD DEVELOPMENT PACKET |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ISO/TS 18223:2015 | Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method |
| EN ISO 15349-2:2003 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| UNI ISO 1444 : 2010 | MEAT AND MEAT PRODUCTS - DETERMINATION OF FREE FAT CONTENT |
| UNI EN 15909 : 2010 | FERTLIZERS - DETERMINATION OF CALCIUM AND FORMATE IN CALCIUM FOLIAR FERTILIZERS |
| ISO 17997-2:2004 | Milk — Determination of casein-nitrogen content — Part 2: Direct method |
| ISO 22036:2008 | Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP - AES) |
| ISO 22725:2007 | Nickel alloys Determination of tantalum Inductively coupled plasma atomic emission spectrometric method |
| ISO 18632:2010 | Alloyed steel Determination of manganese Potentiometric and visual titration method |
| ISO 16297:2013 | Milk Bacterial count Protocol for the evaluation of alternative methods |
| UNI EN ISO 8199 : 2008 | WATER QUALITY - GENERAL GUIDANCE ON THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| ISO 14127:2008 | Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents |
| EN ISO 6883:2017 | Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017) |
| ISO 15323:2002 | Dried milk protein products Determination of nitrogen solubility index |
| ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
| ISO 16014-4:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 4: High-temperature method |
| DIN EN 15587:2016-02 (Draft) | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| ISO 6853:2001 | Photography Processing waste Determination of ammoniacal nitrogen (microdiffusion method) |
| ISO 14490-8:2011 | Optics and optical instruments — Test methods for telescopic systems — Part 8: Test methods for night-vision devices |
| ISO/TS 23647:2010 | Vegetable fats and oils — Determination of wax content by gas chromatography |
| ISO 11505:2012 | Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| ISO 11047:1998 | Soil quality Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc Flame and electrothermal atomic absorption spectrometric methods |
| BS EN ISO 15195:2003 | Laboratory medicine. Requirements for reference measurement laboratories |
| I.S. EN 15704:2009 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 5534:2004 | Cheese and processed cheese — Determination of the total solids content (Reference method) |
| ISO/TR 22305:2006 | Cigarettes Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| ISO 24512:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| ISO 26462:2010 | Milk — Determination of lactose content — Enzymatic method using difference in pH |
| I.S. EN 12390-3:2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| ISO 10993-18:2005 | Biological evaluation of medical devices Part 18: Chemical characterization of materials |
| ISO 15195:2003 | Laboratory medicine Requirements for reference measurement laboratories |
| I.S. EN 15765:2009 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) AFTER PRESSURE DIGESTION |
| ISO 14707:2015 | Surface chemical analysis Glow discharge optical emission spectrometry (GD-OES) Introduction to use |
| ISO 17221:2014 | Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image) |
| I.S. EN 14865-1:2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| ISO 17059:2007 | Oilseeds Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) |
| ISO 8851-2:2004 | Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 2: Determination of non-fat solids content |
| DIN EN 12441-11:2006-10 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| DIN EN ISO 9832 E : 2003 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF RESIDUAL TECHNICAL HEXANE CONTENT |
| DIN EN ISO 6975:2005-09 | NATURAL GAS - EXTENDED ANALYSIS - GAS-CHROMATOGRAPHIC METHOD |
| DIN EN 14941 E : 2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD |
| DIN EN ISO 16931:2009-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIACYLGLYCEROLS BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN 1608:2013-05 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| DIN EN ISO 6926:2016-08 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| DIN EN 14935 E : 2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ET AAS METHOD |
| DIN EN ISO 662 E : 2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT (ISO 662:2016) |
| DIN EN 15550 E : 2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| DIN EN 14939 E : 2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD |
| DIN EN ISO 3657:2013-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE (ISO 3657:2013) |
| DIN EN 15062 E : 2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| DIN EN ISO 5537:2004-09 | Dried milk - Determination of moisture content (Reference method) (ISO 5537:2004) |
| UNE-EN ISO 3656:2011 | Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2011) |
| DIN EN ISO 5764:2009-10 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
| DIN EN ISO 21569 E : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS (ISO 21569:2005 + AMD 1:2013) |
| DIN EN ISO 11890-1:2007-09 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| DIN EN 15055 E : 2006 | NON FATTY FOODS - DETERMINATION OF CHLORMEQUAT AND MEPIQUAT - LC-MS/MS METHOD |
| DIN EN 15022-3:2006-12 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| DIN EN 15054 E : 2006 | NON FATTY FOODS - DETERMINATION OF CHLORMEQUAT AND MEPIQUAT - LC-MS METHOD |
| DIN EN 12089:2013-06 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BENDING BEHAVIOUR |
| BS EN ISO 16035:2005 | Animal and vegetable fats and oils. Determination of low-boiling halogenated hydrocarbons in edible oils |
| ISO 659:2009 | Oilseeds Determination of oil content (Reference method) |
| BS EN 15024-2:2006 | Copper and copper alloys. Determination of zinc content Flame atomic absorption spectrometry method (FAAS) |
| IEC 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| ISO 5764:2009 | Milk — Determination of freezing point — Thermistor cryoscope method (Reference method) |
| BS EN 15055:2006 | Non fatty foods. Determination of chlormequat and mepiquat. LC-MS/MS method |
| BS EN 14907:2005 | Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
| BS EN ISO 10534-2:2001 | Acoustics. Determination of sound absorption coefficient and impedance in impedance tubes Transfer-function method |
| BS EN ISO 11819-1:2001 | Acoustics. Measurement of the influence of road surfaces on traffic noise Statistical pass-by method |
| ISO 6926:2016 | Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| BS EN ISO 17294-1:2006 | Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) General guidelines |
| UNE-EN ISO 20743:2014 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| ISO 8968-1:2014 | Milk and milk products — Determination of nitrogen content — Part 1: Kjeldahl principle and crude protein calculation |
| ISO 18739:2016 | Dentistry — Vocabulary of process chain for CAD/CAM systems |
| BS EN ISO 15349-2:2003 | Unalloyed steel. Determination of low carbon content Infrared absorption method after combustion in an induction furnace (with preheating) |
| BS EN ISO 10993-18:2009 | Biological evaluation of medical devices Chemical characterization of materials |
| UNE-EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| ISO 15197:2013 | In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| ISO 24511:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| BS EN 12506:2003 | Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl<sup>-</sup>, Co, Cr, Cr VI, Cu, Mo, Ni, NO<sub>2</sub><sup>-</sup>, Pb, total S, SO<sub>4</sub><sup>2-</sup>, V and Zn |
| UNE-EN ISO 8968-1:2014 | Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahl principle and crude protein calculation (ISO 8968-1:2014) |
| BS EN ISO 15914:2005 | Animal feeding stuffs. Enzymatic determination of total starch content |
| DIN EN ISO 21571:2013-08 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION (ISO 21571:2005 + AMD 1:2013) |
| BS EN ISO 17189:2003 | Butter, edible oil emulsions and spreadable fats. Determination of fat content (Reference method) |
| BS EN ISO 16472:2006 | Animal feeding stuffs. Determination of amylase-treated neutral detergent fibre content (aNDF) |
| BS EN ISO 4625-2:2006 | Binders for paint and varnishes. Determination of softening point Cup-and-ball method |
| BS EN ISO 14939:2001 | Animal feeding stuffs. Determination of carbadox content. Method using high performance liquid chromatography |
| UNE-EN 62697-1:2013 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| ISO 14182:1999 | Animal feeding stuffs — Determination of residues of organophosphorus pesticides — Gas chromatographic method |
| BS EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method |
| ISO 3657:2013 | Animal and vegetable fats and oils Determination of saponification value |
| DIN EN 14984:2016-10 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| BS EN 12089:2013 | Thermal insulating products for building applications. Determination of bending behaviour |
| BS EN ISO 11816-2:2003 | Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method Fluorometric method for cheese |
| UNE-EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| UNE-EN ISO 21569:2006 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods (ISO 21569:2005) |
| UNE-EN 1608:2013 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| ISO 6320:2017 | Animal and vegetable fats and oils — Determination of refractive index |
| I.S. EN ISO 10993-18:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS (ISO 10993-18:2005) |
| EN 13656 : 2002 | CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| UNI EN ISO 7932 : 2005 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE ENUMERATION OF PRESUMPTIVE BACILLUS CEREUS - COLONY-COUNT TECHNIQUE AT 30 DEGREE C |
| EN ISO 6647-2:2015 | Rice - Determination of amylose content - Part 2: Routine methods (ISO 6647-2:2015) |
| EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| UNE-EN ISO 734-2:2010 | Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:2008, corrected version 2009-06-01) |
| EN 15948:2015 | Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels |
| EN ISO 18369-3:2017 | Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO 18369-3:2017, Corrected version 2017-10-01) |
| ISO 8178-1:2020 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| EN ISO 10993-18:2009 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005) |
| UNE-EN ISO 17059:2010 | Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007) |
| I.S. EN ISO 4625-1:2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| DIN EN ISO 536 E : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| I.S. EN 13823:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| EN ISO 4625-1:2006 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
| ONORM EN ISO 4625-1 : 2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| UNI EN ISO 3657 : 2013 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE |
| I.S. EN ISO 6647-1:2015 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD (ISO 6647-1:2015) |
| I.S. EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| I.S. EN ISO 6647-2:2015 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS (ISO 6647-2:2015) |
| UNI EN 13823 : 2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| UNI EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
| EN ISO 1735:2004 | Cheese and processed cheese products - Determination of fat content - Gravimetric method (Reference method) (ISO 1735:2004) |
| EN ISO 5537:2004 | Dried milk - Determination of moisture content (Reference method) (ISO 5537:2004) |
| EN ISO 29822:2014 | Vegetable fats and oils - Isomeric diacylglycerols - Determination of relative amounts of 1,2- and 1,3-diacylglycerols (ISO 29822:2009) |
| EN 16328:2012 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
| EN ISO 8069:2007 | Dried milk - Determination of content of lactic acid and lactates (ISO 8069:2005) |
| EN 15517:2008 | Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction |
| EN ISO 15304:2002/AC:2004 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF THE CONTENT OF TRANS FATTY ACID ISOMERS OF VEGETABLE FATS AND OIL - GAS CHROMATOGRAPHIC METHOD |
| EN 14937-1:2006 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| EN ISO 18739:2016 | Dentistry - Vocabulary of process chain for CAD/CAM systems (ISO 18739:2016) |
| EN ISO 734-1:2006 | Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:2006) |
| EN ISO 19219:2003 | Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils (ISO 19219:2002) |
| EN ISO 12228-1:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014) |
| EN ISO 1211:2010 | Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:2010) |
| EN ISO 8968-1:2014 | Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahl principle and crude protein calculation (ISO 8968-1:2014) |
| UNI EN ISO 22160 : 2007 | MILK AND MILK-BASED DRINKS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - ENZYMATIC PHOTO-ACTIVATED SYSTEM (EPAS) METHOD |
| UNI EN 196-2 : 2013 | METHOD OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| UNI EN 826 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
| UNI EN 12089 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BENDING BEHAVIOUR |
| UNI EN ISO 9614-3 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| UNI EN ISO 8655-1 : 2004 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| UNI EN ISO 5983-2 : 2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 2: BLOCK DIGESTION AND STEAM DISTILLATION METHOD |
| UNI EN ISO 659 : 2009 | OILSEEDS - DETERMINATION OF OIL CONTENT (REFERENCE METHOD) |
| UNI EN ISO 5983-1 : 2005 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 1: KJELDAHL METHOD |
| UNI EN 13925-3 : 2005 | NON-DESTRUCTIVE TESTING - X RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS - PART 3: INSTRUMENTS |
| UNI EN ISO 24276 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| UNI EN 1607 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| UNI EN ISO 16931 : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIACYLGLYCEROLS BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| UNI EN ISO 734-2 : 2010 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| I.S. EN ISO 8420:2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLAR COMPOUNDS CONTENT |
| UNI EN 12619 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN 1608 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PARALLEL TO FACES |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN 1109 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURE |
| UNI EN ISO 13366-1 : 2008 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| UNI EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| I.S. EN ISO 1735:2004 | CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| UNI EN ISO 2758 : 2014 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| UNI EN ISO 15304 : 2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF THE CONTENT OF TRANS FATTY ACID ISOMERS OF VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHIC METHOD |
| UNI EN ISO 1211 : 2010 | MILK - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| UNI EN ISO 534 : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| UNI EN ISO 8968-1 : 2014 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION |
| EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI EN ISO 5764 : 2009 | MILK - DETERMINATION OF FREEZING POINT - THERMISTOR CRYOSCOPE METHOD (REFERENCE METHOD) |
| EN ISO 14939:2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF CARBADOX CONTENT - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
| UNI EN ISO 11979-3 : 2013 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| UNI EN 443 : 2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| UNI EN 1097-9 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| UNI EN ISO 21569 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN 12390-3 : 2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| UNI EN ISO 11816-1 : 2013 | MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 1: FLUORIMETRIC METHOD FOR MILK AND MILK-BASED DRINKS |
| UNI EN ISO 2759 : 2014 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 12625-3 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
| 09/30201998 DC : 0 | BS EN 15948 - CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-TRANSMITTANCE IN COMBINATION WITH AN ARTIFICIAL NEURAL NETWORK (ANN) PREDICTION MODEL AND ASSOCIATED DATABASE |
| Z316.8-18 | Requirements for the design, development, and validation of laboratory-developed tests used for the screening, diagnosis, and management of clinical conditions |
| ISO 8454:2007 | Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method |
| BS ISO 12080-1:2009 | Dried skimmed milk. Determination of vitamin A content Colorimetric method |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| DIN EN 10361:2016-02 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| UNI ISO 5636-4 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| 14/30294683 DC : 0 | BS ISO 6565 - TOBACCO AND TOBACCO PRODUCTS - DRAW RESISTANCE OF CIGARETTES AND PRESSURE DROP OF FILTER RODS - STANDARD CONDITIONS AND MEASUREMENT |
| ISO/TS 21033:2011 | Animal and vegetable fats and oils Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| 06/30141610 DC : DRAFT AUG 2006 | ISO 20612 - WATER QUALITY - INTERLABORATORY COMPARISONS FOR PROFICIENCY TESTING OF ANALYTICAL TESTING LABORATORIES |
| 14/30275192 DC : 0 | BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| BS ISO 26642:2010 | Food products. Determination of the glycaemic index (GI) and recommendation for food classification |
| DIN EN ISO 8292-1:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 1: Direct method (ISO 8292-1:2008) |
| DIN EN ISO 12872 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT (ISO 12872:2010) |
| BS ISO 11132 : 2012 | SENSORY ANALYSIS - METHODOLOGY - GUIDELINES FOR MONITORING THE PERFORMANCE OF A QUANTITATIVE SENSORY PANEL |
| DIN EN 15517:2008-09 | Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction |
| DIN 10772-2:2005-05 | Analysis of coffee and coffee products - Karl Fischer method for the determination of water content - Part 2: Reference method for soluble coffee |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| BS ISO 3374:2000 | Reinforcement products. Mats and fabrics. Determination of mass per unit area |
| DIN ISO 15592-1:2005-05 | Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling (ISO 15592-1:2001) |
| DIN EN 15605 E : 2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| DIN EN 10361 E : 2016 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| DIN EN ISO 8292-2:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 2: Indirect method (ISO 8292-2:2008) |
| I.S. EN 15948:2015 | CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-SPECTROSCOPY IN WHOLE KERNELS |
| I.S. EN ISO 8292-2:2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SOLID FAT CONTENT BY PULSED NMR - PART 2: INDIRECT METHOD |
| CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| BS ISO 6495-1:2015 | Animal feeding stuffs. Determination of water-soluble chlorides content Titrimetric method |
| ISO 19662:2018 | Milk — Determination of fat content — Acido-butyrometric (Gerber method) |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| ISO/TS 11869:2012 | Fermented milks Determination of titratable acidity Potentiometric method |
| DIN EN ISO 734 E : 2016 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) (ISO 734:2015) |
| DIN EN 16279:2012-09 | Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) |
| 09/30206298 DC : 0 | BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| DIN EN ISO 18854 E : 2015 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| BS EN 15605:2010 | Copper and copper alloys. Inductively coupled plasma optical emission spectrometry |
| ISO/TS 19046-2:2017 | Cheese — Determination of propionic acid level by chromatography — Part 2: Method by ion exchange chromatography |
| DIN EN 15585:2008-11 | CEREALS AND CEREAL PRODUCTS - DURUM WHEAT (T. DURUM DESF.) - DETERMINATION OF PERCENTAGE OF MITADINE GRAINS AND CALCULATION OF PERCENTAGE OF VITRIOUS GRAINS |
| UNI ISO 11843-5 : 2014 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| BS EN 15688:2008 | Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 2171:2010-08 | Cereals, pulses and by-products - Determination of ash yield by incineration (ISO 2171:2007) |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| BS EN 16378:2013 | Cereals. Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) |
| UNI CEN/TS 16023 : 2014 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| DIN EN 15749:2010-02 | Fertilizers - Determination of sulfates content using three different methods |
| 12/30245706 DC : 0 | BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS |
| DIN ISO 11047 E : 2003 | SOIL QUALITY - DETERMINATION OF CADMIUM, CHROMIUM, COBALT, COPPER, LEAD, MANGANESE, NICKEL AND ZINC IN AQUA REGIA EXTRACTS OF SOIL - FLAME AND ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRIC METHODS |
| DIN EN ISO 12779:2013-08 | Lactose - Determination of water content - Karl Fischer method (ISO 12779:2011) |
| ISO 12787:2011 | Cosmetics Analytical methods Validation criteria for analytical results using chromatographic techniques |
| DIN EN 15622 E : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN ISO 16297 : 2014 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS |
| 05/30138779 DC : DRAFT SEP 2005 | ISO 9233-1 - CHEESE, CHEESE RIND AND PROCESSED CHEESE - DETERMINATION OF NATAMYCIN CONTENT - PART 1: MOLECULAR ABSORPTION SPECTROMETRIC METHOD FOR CHEESE RIND |
| BS EN ISO 2171:2010 | Cereals, pulses and by-products. Determination of ash yield by incineration |
| UNI EN ISO 5529 : 2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| BS ISO 3657 : 2002 AMD 14676 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE |
| DIN EN 15909 E : 2010 | FERTILIZERS - DETERMINATION OF CALCIUM AND FORMATE IN CALCIUM FOLIAR FERTILIZERS |
| BS ISO 3093 : 2004 AMD 17028 | WHEAT, RYE AND RESPECTIVE FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
| 11/30252539 DC : 0 | BS EN 10355 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO, SN [ROUTINE METHOD] |
| 14/30311290 DC : 0 | BS EN ISO 16634-2 - FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 2: CEREALS, PULSES AND MILLED CEREAL PRODUCTS |
| DD ISO/TS 2963:2006 | Cheese and processed cheese products. Determination of citric acid content. Enzymatic method |
| DD CEN ISO/TS 16634-2:2009 | Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Cereals, pulses and milled cereal products |
| I.S. EN 13370:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, EASILY LIBERATABLE CN[-], F[-] |
| DIN EN 15478:2009-04 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| ISO 3034:2011 | Corrugated fibreboard — Determination of single sheet thickness |
| DIN ISO 22036:2009-06 | Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
| 16/30342879 DC : 0 | BS EN 15621 - ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| UNE-EN ISO 11132:2017 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) |
| BS EN ISO 18369-3:2017 | Ophthalmic optics. Contact lenses Measurement methods |
| DD ISO/TS 15495:2010 | Milk, milk products and infant formulae. Guidelines for the quantitative determination of melamine and cyanuric acid by LC-MS/MS |
| DIN EN ISO 5530-1:2015-03 | Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013) |
| I.S. EN 13130-8:2004 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS SUBSTANCES SUBJECT TO LIMITATION - PART 8: DETERMINATION OF ISOCYANATES IN PLASTICS |
| 04/30112069 DC : DRAFT APR 2004 | ISO 17129 - MILK AND MILK PRODUCTS - DETERMINATION OF SOY AND PEA PROTEINS USING SDS-CE (SCREENING METHOD) |
| I.S. EN ISO 734-2:2010 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| 13/30277424 DC : 0 | BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| 16/30279101 DC : DRAFT MAR 2016 | BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS |
| BS EN 16075:2011 | Fertilizers. Determination of N-(2-nitrophenyl) phosphoric triamide (2- NPT) in urea and fertilizers containing urea. Method using high-performance liquid chromatography (HPLC) |
| DD CEN/TS 15479:2006 | Fertilizers. Spectrophotometric determination of biuret in urea |
| 02/706069 DC : DRAFT MAY 2002 | ISO/DIS 1735 - CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| BS ISO 15593:2001 | Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Determination of particulate matter by ultraviolet absorbance and by fluorescence |
| UNI CEN/TS 16317 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC AMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| UNI ISO 5636-3 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 08/30164905 DC : DRAFT JUNE 2008 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI EN 16117-2 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| BS ISO 15163:2012 | Milk and milk products. Calf rennet and adult bovine rennet. Determination by chromatography of chymosin and bovine pepsin contents |
| BS 6200-3.5.3:1998 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron Curcumin spectrophotometric method after distillation |
| UNI CEN/TS 16318 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CHROMIUM (6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| BS ISO 5658-4:2001 | Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| BS EN ISO 16297:2014 | Milk. Bacterial count. Protocol for the evaluation of alternative methods |
| 04/30124942 DC : DRAFT NOV 2004 | BS EN 61223-2-6 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| 11/30201059 DC : 0 | BS ISO 20193 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF THE WIDTH OF THE STRANDS OF CUT TOBACCO |
| DD ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| ISO 13082:2011 | Milk and milk products — Determination of the lipase activity of pregastric lipase preparation |
| DIN ISO 5725-3:2003-02 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| 08/30189644 DC : DRAFT SEP 2008 | BS ISO 28198 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER |
| BS ISO 26462:2010 | Milk. Determination of lactose content. Enzymatic method using difference in pH |
| 06/30153680 DC : 0 | BS ISO 27107 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - POTENTIOMETRIC END-POINT DETERMINATION |
| BS ISO 11866-2:2005 | Milk and milk products. Enumeration of presumptive Escherichia coli Colony-count technique at 44°C using membranes |
| 10/30233636 DC : 0 | IEC 62697-1 ED.1 - INSULATING LIQUIDS - QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN USED AND UNUSED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYL DISULFIDE (DBDS) |
| BS EN ISO 12228-2:2014 | Determination of individual and total sterols contents. Gas chromatographic method Olive and olive pomace oils |
| BS ISO 12873 : 2010 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY |
| DIN ISO 20193:2015-06 | Tobacco and tobacco products - Determination of the width of the strands of cut tobacco (ISO 20193:2012) |
| 06/30145474 DC : DRAFT JULY 2006 | ISO 11876 - HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS EN ISO 11085:2015 | Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method |
| BS ISO 1738:2004 | Butter. Determination of salt content |
| PD ISO/TS 22113:2012 | Milk and milk products. Determination of the titratable acidity of milk fat |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 09/30210426 DC : 0 | BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| DIN EN 15305 E : 2009 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| PD CEN/TS 16023:2013 | Characterization of waste. Determination of gross calorific value and calculation of net calorific value |
| BS ISO 17294-1 : 2004 AMD 16802 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| UNI ISO 15163 : 2013 | MILK AND MILK PRODUCTS - CALF RENNET AND ADULT BOVINE RENNET - DETERMINATION BY CHROMATOGRAPHY OF CHYMOSIN AND BOVINE PEPSIN CONTENTS |
| DIN EN 15622:2010-06 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| BS ISO 11866-3:1997 | Milk and milk products. Enumeration of presumptive Escherichia coli Colony-count technique at 44°C using membranes |
| DD ISO/TS 25138:2010 | Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| 07/30165828 DC : 0 | BS ISO 29765 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| 15/30317578 DC : 0 | BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| BS ISO 19219 : 2002 AMD 14804 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF VISIBLE FOOTS IN CRUDE FATS AND OILS |
| 05/30137551 DC : DRAFT AUG 2005 | ISO 21415-2 - WHEAT AND WHEAT FLOUR - GLUTEN CONTENT - PART 2: DETERMINATION OF WET GLUTEN BY MECHANICAL MEANS |
| 11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| BS ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
| BS EN 15948:2015 | Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels |
| 11/30244575 DC : 0 | BS EN 16117-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| BS 5766-18:1999 | Methods for analysis of animal feeding stuffs Determination of fat content |
| BS ISO 15648:2004 | Butter. Determination of salt content. Potentiometric method |
| ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| DIN EN 15765:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion |
| UNI EN 14865-1 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| ISO 16700:2016 | Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
| BS ISO 5530-4:2002 | Wheat flour (Triticum aestivum L.). Physical characteristics of doughs Determination of rheological properties using an alveograph |
| ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
| ISO/TS 21432:2005 | Non-destructive testing Standard test method for determining residual stresses by neutron diffraction |
| UNE-EN ISO 12873:2014 | Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography (ISO 12873:2010) |
| 13/30283973 DC : 0 | BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT |
| 13/30279116 DC : 0 | BS ISO 17217-1 - TRADITIONAL CHINESE MEDICINE - GINSENG SEEDS AND SEEDLINGS - PART 1: PANAX GINSENG CA MEYER |
| PD ISO/TS 19046-2:2017 | Cheese. Determination of propionic acid level by chromatography Method by ion exchange chromatography |
| UNE-EN 16487:2015 | Acoustics - Test code for suspended ceilings - Sound absorption |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| DD CEN/TS 15705:2009 | Fertilizers. Determination of urea condensates using high-performance liquid chromotography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) |
| 16/30321180 DC : 0 | BS ISO 19660 - CREAM - DETERMINATION OF FAT CONTENT - ACIDO-BUTYROMETRIC METHOD (ROUTINE METHOD) |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS 5766-26(2001) : 2001 | ANIMAL FEEDING STUFFS - DETERMINATION OF VITAMIN A CONTENT - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| UNI EN 16487 : 2015 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| 07/30159058 DC : DRAFT FEB 2007 | BS EN 15360 - FERTILIZERS - DETERMINATION OF DICYANDIAMIDE - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| UNI ISO 11462-2 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| 16/30342873 DC : 0 | BS EN 15510 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| DIN EN ISO 16297:2014-09 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| BS ISO 5550:2006 | Caseins and caseinates. Determination of moisture content (Reference method) |
| BS ISO 27107 : 2008 COR 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - POTENTIOMETRIC END-POINT DETERMINATION |
| 04/30123610 DC : DRAFT OCT 2004 | EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| 17/30345263 DC : 0 | BS EN ISO 6974-3 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 3: PRECISION AND BIAS |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| BS 5766-15:1997 | Methods for analysis of animal feeding stuffs Determination of soluble nitrogen content after treatment with pepsin in dilute hydrochloric acid |
| CEI EN 62321-1 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| 07/30170690 DC : 0 | BS ISO 29581-2 - METHODS OF TESTING CEMENT - CHEMICAL ANALYSIS OF CEMENT - PART 2: ANALYSIS BY X-RAY FLUORESCENCE |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| 07/30150572 DC : 0 | ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS |
| 12/30196191 DC : 0 | BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| PD ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| 16/30316986 DC : 0 | BS EN 15587 - CEREAL AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.), TRITICALE (TRITICOSECALE WITTMACK SPP) AND FEED BARLEY (HORDEUM VULGARE L.) |
| DIN EN ISO 3960:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - IODOMETRIC (VISUAL) ENDPOINT DETERMINATION (ISO 3960:2017) |
| PREN 13649 : DRAFT 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
| 12/30266246 DC : DRAFT SEP 2012 | BS ISO 8243 - CIGARETTES - SAMPLING |
| ISO 15885:2002 | Milk fat — Determination of the fatty acid composition by gas-liquid chromatography |
| 07/30162549 DC : 0 | BS ISO 8196-3 - MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 3: PROTOCOL FOR THE EVALUATION AND VALIDATION OF ALTERNATIVE QUANTITATIVE METHODS OF MILK ANALYSIS |
| DIN EN ISO 12625-15 E : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| 06/30156348 DC : 0 | BS EN 15587 - CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUMAESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALECEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| 04/30114360 DC : DRAFT JUN 2004 | ISO 17713-1 - METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE |
| BS EN 15025:2010 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS) |
| BS 4325-14:2000 | Methods for analysis of oilseed residues Simultaneous determination of oil and water contents. Method using pulsed nuclear magnetic resonance spectroscopy |
| 13/30277739 DC : 0 | BS EN ISO 21415-2 - WHEAT AND WHEAT FLOUR - GLUTEN CONTENT - PART 2: DETERMINATION OF WET GLUTEN BY MECHANICAL MEANS |
| BS EN ISO 29841 : 2014 | VEGETABLE FATS AND OILS - DETERMINATION OF THE DEGRADATION PRODUCTS OF CHLOROPHYLLS A AND A' (PHEOPHYTINS A, A' AND PYROPHEOPHYTINS) |
| 18/30370150 DC : DRAFT APR 2018 | BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD |
| 08/30178429 DC : DRAFT FEB 2008 | BS EN ISO 659 - OILSEEDS - DETERMINATION OF OIL CONTENT (REFERENCE METHOD) |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| DD ISO/TS 9941:2005 | Milk and canned evaporated milk. Determination of tin content. Spectrometric method |
| 14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
| 12/30265045 DC : 0 | BS ISO 17221 - PLASTICS - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE) |
| PD CEN/TS 16319:2012 | Fertilizers. Determination of trace elements. Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| BS EN 14793:2017 | Stationary source emissions. Demonstration of equivalence of an alternative method with a reference method |
| BS ISO 11505:2012 | Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| BS EN 16841-1:2016 | Ambient air. Determination of odour in ambient air by using field inspection Grid method |
| 06/30153305 DC : DRAFT JULY 2006 | BS ISO 3356 - MILK AND DRIED MILK, BUTTERMILK AND BUTTERMILK POWDER, WHEY AND WHEY POWDER - DETERMINATION OF RESIDUAL ALKALINE PHOSPHATASE |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| BS EN 61620:1999 | Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method |
| DD ISO/TS 23647:2010 | Vegetable fats and oils. Determination of wax content by gas chromatography |
| BS ISO 8070:2007 | Milk and milk products. Determination of calcium, sodium, potassium and magnesium contents. Atomic absorption spectrometric method |
| BS ISO 23065:2009 | Milk fat from enriched dairy products. Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography |
| 09/30210251 DC : 0 | BS EN 16024 - FERTILIZERS - DETERMINATION OF 1H,2,4-TRIAZOLE IN UREA AND IN FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| UNI EN ISO 15303 : 2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETECTION AND IDENTIFICATION OF A VOLATILE ORGANIC CONTAMINANT BY GC/MS |
| BS 1741-13:1998 | Methods for chemical analysis of liquid milk and cream Determination of lactulose content of heat-treated milk (HPLC method) |
| 18/30303618 DC : 0 | BS ISO 19745 - FERTILIZERS AND SOIL CONDITIONERS - DETERMINATION OF CRUDE (FREE) WATER CONTENT OF AMMONIATED PHOSPHATE PRODUCTS - DAP, MAP - BY GRAVIMETRIC VACUUM OVEN AT 50 DEGREES C |
| BS EN ISO 18369-1:2017 | Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications |
| BS EN ISO 12999-1:2014 | Acoustics. Determination and application of measurement uncertainties in building acoustics Sound insulation |
| 14/30298904 DC : 0 | BS EN ISO 7784-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 3: METHOD WITH ABRASIVE-PAPER COVERED WHEEL AND LINEARLY RECIPROCATING TEST PANEL |
| I.S. EN ISO 21415-2:2015 | WHEAT AND WHEAT FLOUR - GLUTEN CONTENT - PART 2: DETERMINATION OF WET GLUTEN AND GLUTEN INDEX BY MECHANICAL MEANS (ISO 21415-2:2015) |
| ISO 11843-5:2008 | Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases |
| BS ISO 5765-1:2002 | Dried milk, dried ice-mixes and processed cheese. Determination of lactose content Enzymatic method utilizing the glucose moiety of the lactose |
| BIS IS 16195 : 2014 | MILK, MILK PRODUCTS AND INFANT FORMULAE - GUIDELINES FOR THE QUANTITATIVE DETERMINATION OF MELAMINE AND CYANURIC ACID BY LC-MS/MS |
| BS ISO 9874:2006 | Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry |
| ISO 20494:2017 | Paper — Requirements for stability for general graphic applications |
| 04/30109612 DC : 0 | EN ISO 16634 - CEREALS, PULSES, MILLED CEREAL PRODUCTS, OILSEEDS, OILSEED RESIDUES AND ANIMAL FEEDING STUFFS - DETERMINATION OF TOTAL NITROGEN AND CRUDE PROTEIN CONTENTS BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE |
| BS EN ISO 16634-1:2008 | Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Oilseeds and animal feeding stuffs |
| ISO 12828-1:2011 | Validation method for fire gas analysis — Part 1: Limits of detection and quantification |
| UNE-EN 16279:2012 | Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) |
| EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| UNE-ISO 2493-2:2014 | Paper and board. Determination of resistance to bending. Part 2: Taber-type tester |
| 17/30335677 DC : 0 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| BS ISO 27105:2016 | Milk and cheese. Determination of hen’s egg white lysozyme content by high performance liquid chromatography |
| ANSI S12-5:2006 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| DD CEN/TS 15621:2007 | Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| BS ISO 6730:2005 | Milk. Enumeration of colony-forming units of psychrotrophic microorganisms. Colony-count technique at 6,5°C |
| UNI EN ISO 11701 : 2010 | VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHOLIPIDS CONTENT IN LECITHINS BY HPLC USING A LIGHT-SCATTERING DETECTOR |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 04/30126703 DC : DRAFT DEC 2004 | ISO 13366-2 - MILK - ENUMERATION OF SOMATIC CELLS - PART 2: ELECTRONIC PARTICLE COUNTER METHOD |
| UNI EN 10355 : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| 05/30137047 DC : 0 | EN 15305 - NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| DIN EN 15478 E : 2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| UNI EN 15705 : 2010 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)<br> |
| UNI CEN ISO/TS 16634-2 : 2009 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 2: CEREALS, PULSES AND MILLED CEREAL PRODUCTS |
| BS EN ISO 21068-1:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products General information and sample preparation |
| UNE-ISO 16945:2015 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| BS ISO 16305:2005 | Butter. Determination of firmness |
| UNI CEN/TS 15439 : 2008 | BIOMASS GASIFICATION - TAR AND PARTICLES IN PRODUCT GASES - SAMPLING AND ANALYSIS |
| ANSI S12-5 : 2006 : R2011 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| I.S. CEN TR 14823:2003 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - QUANTITATIVE DETERMINATION OF PENTACHLOROPHENOL IN WOOD - GAS CHROMATOGRAPHIC METHOD |
| UNI EN ISO 14501 : 2008 | MILK AND MILK POWDER - DETERMINATION OF AFLATOXIN M[1] CONTENT - CLEAN-UP BY IMMUNOAFFINITY CHROMATOGRAPHY AND DETERMINATION BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY |
| BS ISO 10540-1:2003 | Animal and vegetable fats and oils. Determination of phosphorus content Colorimetric method |
| PREN 15024-2 : DRAFT 2016 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 16024 : 2011 | FERTILIZERS - DETERMINATION OF 1H-1,2,4-TRIAZOLE IN UREA AND IN FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| 09/30192414 DC : 0 | BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| ISO 4094:2017 | Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 |
| I.S. EN 16278:2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
| UNE-EN 15605:2011 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| BS ISO 19030-1:2016 | Ships and marine technology. Measurement of changes in hull and propeller performance General principles |
| UNE-EN 15765:2010 | Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion |
| ISO 6611:2004 | Milk and milk products — Enumeration of colony-forming units of yeasts and/or moulds — Colony-count technique at 25 degrees C |
| ISO/TS 22113:2012 | Milk and milk products — Determination of the titratable acidity of milk fat |
| I.S. EN 16318:2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| BS ISO 5629:2017 | Paper and board. Determination of bending stiffness. Resonance method |
| UNE-EN 16024:2011 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| I.S. EN ISO 6321:2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MELTING POINT IN OPEN CAPILLARY TUBES (SLIP POINT) |
| I.S. EN ISO 15351:2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| UNE-EN 15587:2008 | Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ISO 19660:2018 | Cream — Determination of fat content — Acido-butyrometric method |
| BS EN 16318 : 2013 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| UNI EN 15305 : 2008 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| UNI CEN/TS 16490 : 2013 | FERTILIZERS - COMPARISON OF THE CEN/TC 260/WG 7 RING TEST RESULTS WITH TOLERANCES GIVEN IN THE REGULATION (EC) NR 2003/2003 ANNEX 2 AND CONCLUSIONS |
| ISO 1740:2004 | Milkfat products and butter — Determination of fat acidity (Reference method) |
| I.S. EN 16357:2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| I.S. EN 15476:2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| I.S. EN 15428:2007 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| IEC TR 62697-2:2018 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 2: Test method for quantitative determination of total corrosive sulfur (TCS) |
| ISO 11814:2002 | Dried milk Assessment of heat treatment intensity Method using high-performance liquid chromatography |
| ISO 29301:2017 | Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures |
| DIN EN ISO 6883:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| I.S. EN ISO 16050:2011 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1], AND THE TOTAL CONTENT OF AFLATOXINS B[1], B[2], G[1] AND G[2] IN CEREALS, NUTS AND DERIVED PRODUCTS - HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD |
| CEN/TR 10353:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
| I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| UNI EN ISO 8292-2 : 2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SOLID FAT CONTENT BY PULSED NMR - PART 2: INDIRECT METHOD |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| I.S. EN ISO 21068-1:2008 | CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
| ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| ISO 22935-3:2009 | Milk and milk products — Sensory analysis — Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring |
| DIN EN 16841-1:2015-04 (Draft) | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| UNI CEN/TS 16319 : 2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| I.S. EN 16117-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 1: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT LESS THAN 99,85% |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 16014-5:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection |
| PREN 12390-3 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| ISO 19983:2017 | Rubber — Determination of precision of test methods |
| I.S. EN 16024:2011 | FERTILIZERS - DETERMINATION OF 1H-1,2,4-TRIAZOLE IN UREA AND IN FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| I.S. EN ISO 22959:2009 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS BY ON-LINE DONOR-ACCEPTOR COMPLEX CHROMATOGRAPHY AND HPLC WITH FLUORESCENCE DETECTION |
| ISO/TS 17822-1:2014 | In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions |
| ISO/TS 19046-1:2017 | Cheese — Determination of propionic acid level by chromatography — Part 1: Method by gas chromatography |
| PREN ISO 16140 : DRAFT 1999 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| I.S. EN 15305:2008 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| BS ISO 16014-4:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography High-temperature method |
| ISO 14892:2002 | Dried skimmed milk Determination of vitamin D content using high-performance liquid chromatography |
| BS ISO 18363-3:2017 | Animal and vegetable fats and oils. Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol |
| BS ISO 28198:2009 | Vegetable fats and oils. Determination of toluene insoluble matter |
| UNI EN ISO 16014-5 : 2013 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION |
| I.S. EN 61223-3-5:2004 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| 17/30360096 DC : 0 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| 17/30360084 DC : 0 | BS EN 12390-7 - TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| EN ISO 17201-1:2005/AC:2009 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
| BS EN ISO 6571 : 2009 | SPICES, CONDIMENTS AND HERBS - DETERMINATION OF VOLATILE OIL CONTENT (HYDRODISTILLATION METHOD) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CEN/TR 10354:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry |
| PREN ISO 20743 : DRAFT 2012 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012) |
| UNI EN ISO 20743 : 2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS |
| CR 10299 : 1998 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EN ISO 8199:2007 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
| UNE-EN ISO 16634-2:2016 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO 16634-2:2016) |
| CEN ISO/TS 21432:2005/AC:2009 | NON-DESTRUCTIVE TESTING - STANDARDS TEST METHOD FOR DETERMINING RESIDUAL STRESSES BY NEUTRON DIFFRACTION |
| I.S. EN ISO 11085:2015 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
| ISO 2493-2:2011 | Paper and board Determination of bending resistance Part 2: Taber-type tester |
| ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO 17129:2006 | Milk powder — Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE) — Screening method |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO 11462-2:2010 | Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
| ISO/TS 17193:2011 | Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method) |
| ISO 12871:2010 | Olive oils and olive-pomace oils Determination of aliphatic alcohols content by capillary gas chromatography |
| ISO/TS 25138:2010 | Surface chemical analysis Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| ISO 16014-3:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 3: Low-temperature method |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 28198:2009 | Vegetable fats and oils Determination of toluene insoluble matter |
| ISO 8851-3:2004 | Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 3: Calculation of fat content |
| ISO 25337:2010 | Plastics Production quality control Statistical method for using single measurements |
| ISO 18369-3:2017 | Ophthalmic optics — Contact lenses — Part 3: Measurement methods |
| ISO 14674:2005 | Milk and milk powder Determination of aflatoxin M1 content Clean-up by immunoaffinity chromatography and determination by thin-layer chromatography |
| ISO 5636-6:2015 | Paper and board Determination of air permeance (medium range) Part 6: Oken method |
| I.S. CEN TS 15476:2006 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| I.S. CR 14061:2000 | FERTILIZERS - DETERMINATION OF DUST CONTENT |
| I.S. EN ISO 8534:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (PYRIDINE FREE) (ISO 8534:2017) |
| I.S. EN 15170:2008 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| ISO 5985:2002 | Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid |
| ISO 19344:2015 | Milk and milk products Starter cultures, probiotics and fermented products Quantification of lactic acid bacteria by flow cytometry |
| IWA 15:2015 | Specification and method for the determination of performance of automated liquid handling systems |
| ISO 23058:2006 | Milk and milk products — Ovine and caprine rennets — Determination of total milk-clotting activity |
| ISO 18252:2006 | Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Routine method) |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO/TS 6733:2006 | Milk and milk products Determination of lead content Graphite furnace atomic absorption spectrometric method |
| I.S. CEN TR 15522-2:2006 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS |
| ISO/TS 17996:2006 | Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate |
| I.S. EN ISO 1518-1:2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| ISO 7760:2001 | Photography Processing waste Determination of hydroquinone |
| I.S. EN 15605:2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| S.R. CEN/TS 15916-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 13823:2015-02 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| I.S. EN 62563-1:2010 | MEDICAL ELECTRICAL EQUIPMENT - MEDICAL IMAGE DISPLAY SYSTEMS - PART 1: EVALUATION METHODS |
| DIN EN ISO 17511:2003-11 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| ISO 17997-1:2004 | Milk — Determination of casein-nitrogen content — Part 1: Indirect method (Reference method) |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| EN ISO 11132:2017 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) |
| EN 62563-1:2010/A1:2016 | MEDICAL ELECTRICAL EQUIPMENT - MEDICAL IMAGE DISPLAY SYSTEMS - PART 1: EVALUATION METHODS (IEC 62563-1:2009/A1:2016) |
| BS EN 13823:2010+A1:2014 | Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item |
| DIN EN ISO 21570 E : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005 + COR 1:2006 + AMD 1:2013) |
| DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| DIN EN ISO 3037:2013-12 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| DIN EN 14627 E : 2005 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TOTAL ARSENIC AND SELENIUM BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HGAAS) AFTER PRESSURE DIGESTION |
| DIN EN ISO 14637:2007-03 | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004) |
| DIN EN ISO 11689:1997-03 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT |
| DIN EN ISO 2759:2014-10 | Board - Determination of bursting strength (ISO 2759:2014) |
| DIN EN ISO 3656:2011-05 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN 826:2013-05 | Thermal insulating products for building applications - Determination of compression behaviour |
| DIN EN 1097-9:2014-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 2758:2014-12 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| DIN EN ISO 12625-7:2014-08 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
| DIN EN ISO 21571 E : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION (ISO 21571:2005 + AMD 1:2013) |
| DIN EN ISO 11979-3 E : 2013 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| UNE-ISO 6565:2012 | Tobacco and tobacco products -- Draw resistance of cigarettes and pressure drop of filter rods -- Standard conditions and measurement |
| ISO 1211:2010 | Milk — Determination of fat content — Gravimetric method (Reference method) |
| BS EN ISO 16017-1:2001 | Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Pumped sampling |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| ISO 11085:2015 | Cereals, cereals-based products and animal feeding stuffs Determination of crude fat and total fat content by the Randall extraction method |
| BS EN ISO 17932:2011 | Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content |
| BS EN 12441-10:2004 | Zinc and zinc alloys. Chemical analysis Determination of chromium and titanium in zinc alloys. Spectrophotometric method |
| BS EN ISO 14182:2000 | Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method |
| BS EN ISO 11689 : 1997 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| ISO 21570:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods |
| ISO 12228:1999 | Animal and vegetable fats and oils Determination of individual and total sterols contents Gas chromatographic method |
| ISO 6869:2000 | Animal feeding stuffs — Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc — Method using atomic absorption spectrometry |
| BS EN 1330-11:2007 | Non-destructive testing. Terminology Terms used in X-ray diffraction from polycrystalline and amorphous materials |
| BS EN ISO 8178-2:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site |
| BS EN 13649:2002 | Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method |
| BS EN 932-6:1999 | Tests for general properties of aggregates Definitions of repeatability and reproducibility |
| BS EN 826:2013 | Thermal insulating products for building applications. Determination of compression behaviour |
| BS EN 13612:2002 | Performance evaluation of in vitro diagnostic medical devices |
| BS EN ISO 14501:1999 | Milk and milk powder. Determination of aflatoxin M<sub>1</sub> content. Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography |
| UNE-EN 16317:2014 | Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| BS EN ISO 3037:2013 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN ISO 13900:2002 | Steel. Determination of boron content. Curcumin spectrophotometric method after distillation |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| BS EN ISO 3727-1:2002 | Butter. Determination of moisture, non-fat solids and fat contents Determination of moisture content (Reference method) |
| BS EN ISO 10519:2015 | Rapeseed. Determination of chlorophyll content. Spectrometric method |
| BS EN 12441-7:2004 | Zinc and zinc alloys. Chemical analysis Determination of tin. Flame atomic absorption spectrometric method after extraction |
| BS EN ISO 21570 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| EN ISO 7932:2004 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE ENUMERATION OF PRESUMPTIVE BACILLUS CEREUS - COLONY-COUNT TECHNIQUE AT 30 DEGREES C (ISO 7932:2004) |
| BS EN 13130-2:2004 | Materials and articles in contact with foodstuffs. Plastics substances subject to limitation Determination of terephthalic acid in food simulants |
| BS EN ISO 12625-3:2014 | Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| UNE-EN ISO 9936:2016 | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2016) |
| ISO 11609:2017 | Dentistry — Dentifrices — Requirements, test methods and marking |
| ISO 21569:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Qualitative nucleic acid based methods |
| ISO/TS 21268-3:2007 | Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow percolation test |
| UNE-EN ISO 6885:2016 | Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2016) |
| BS EN 14185-2:2006 | Non fatty foods. Determination of N-methylcarbamate residues HPLC method with clean-up on a diatomaceous earth column |
| ISO 22160:2007 | Milk and milk-based drinks — Determination of alkaline phosphatase activity — Enzymatic photo-activated system (EPAS) method |
| BS EN ISO 536:2012 | Paper and board. Determination of grammage |
| ISO 3727-1:2001 | Butter — Determination of moisture, non-fat solids and fat contents — Part 1: Determination of moisture content (Reference method) |
| BS EN 14242:2004 | Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis |
| ISO 7027:1999 | Water quality Determination of turbidity |
| ISO 8968-3:2004 | Milk — Determination of nitrogen content — Part 3: Block-digestion method (Semi-micro rapid routine method) |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| IEC 61391-1:2006+AMD1:2017 CSV | Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN 15054:2006 | Non fatty foods. Determination of chlormequat and mepiquat. LC-MS method |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| ISO 11701:2009 | Vegetable fats and oils Determination of phospholipids content in lecithins by HPLC using a light-scattering detector |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| IEC 61223-2-6:2006 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests imaging performance of computed tomography X-ray equipment |
| BS EN ISO 658:2002 | Oilseeds. Determination of content of impurities |
| ISO 1735:2004 | Cheese and processed cheese products Determination of fat content Gravimetric method (Reference method) |
| ISO 489:1999 | Plastics Determination of refractive index |
| ISO 17932:2011 | Palm oil Determination of the deterioration of bleachability index (DOBI) and carotene content |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| BS EN ISO 6926:2016 | Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| ISO 734-1:2006 | Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) |
| ISO 662:2016 | Animal and vegetable fats and oils Determination of moisture and volatile matter content |
| BS EN ISO 489:1999 | Plastics. Determination of refractive index |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| BS EN ISO 21569 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| UNI EN ISO 536 : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| ISO 10519:2015 | Rapeseed Determination of chlorophyll content Spectrometric method |
| ISO 14902:2001 | Animal feeding stuffs — Determination of trypsin inhibitor activity of soya products |
| BS EN 12441-1:2002 | Zinc and zinc alloys. Chemical analysis Determination of aluminium in zinc alloys. Titrimetric method |
| BS EN ISO 14891:2002 | Milk and milk products. Determination of nitrogen content. Routine method using combustion according to the Dumas principle |
| ISO 712:2009 | Cereals and cereal products — Determination of moisture content — Reference method |
| ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
| BS EN ISO 8655-1:2002 | Piston-operated volumetric apparatus Terminology, general requirements and user recommendations |
| BS EN ISO 534:2011 | Paper and board. Determination of thickness, density and specific volume |
| BS EN ISO 4934:2003 | Steel and iron. Determination of sulfur content. Gravimetric method |
| BS EN ISO 3657:2013 | Animal and vegetable fats and oils. Determination of saponification value |
| I.S. EN ISO 3657:2013 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE (ISO 3657:2013) |
| BS EN ISO 662:2016 | Animal and vegetable fats and oils. Determination of moisture and volatile matter content |
| UNE-EN ISO 15753:2016 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2016) |
| BS EN 14942-2:2006 | Copper and copper alloys. Determination of arsenic content FAAS method |
| BS EN 15111:2007 | Foodstuffs. Determination of trace elements. Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry) |
| UNE-EN 16319:2015 | Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| BS EN ISO 11890-2:2013 | Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
| ISO 10565:1998 | Oilseeds — Simultaneous determination of oil and water contents — Method using pulsed nuclear magnetic resonance spectrometry |
| BS EN ISO 14181 : 2001 | METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOCHLORINE PESTICIDES - GAS CHROMATOGRAPHIC METHOD |
| BS EN ISO 12625-6:2016 | Tissue paper and tissue products Determination of grammage |
| UNE-EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| BS EN ISO 1211:2010 | Milk. Determination of fat content. Gravimetric method (Reference method) |
| BS EN 13526:2002 | Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes. Continuous flame ionisation detector method |
| I.S. EN ISO 7932:2005 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE ENUMERATION OF PRESUMPTIVE BACILLUS CEREUS - COLONY-COUNT TECHNIQUE AT 30 DEGREES C |
| BS EN ISO 5943:2006 | Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method |
| BS EN ISO 8968-1:2014 | Milk and milk products. Determination of nitrogen content Kjeldahl principle and crude protein calculation |
| UNE-EN ISO 3657:2013 | Animal and vegetable fats and oils - Determination of saponification value (ISO 3657:2013) |
| UNE-EN ISO 6320:2017 | Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2017) |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| BS EN 12619:2013 | Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method |
| BS EN ISO 6320:2017 | Animal and vegetable fats and oils. Determination of refractive index |
| ISO 14939:2001 | Animal feeding stuffs — Determination of carbadox content — Method using high-performance liquid chromatography |
| UNE-EN ISO 12228-1:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014) |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| BS EN 13925-1:2003 | Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials General principles |
| EN ISO 3657:2013 | Animal and vegetable fats and oils - Determination of saponification value (ISO 3657:2013) |
| ISO 14181:2000 | Animal feeding stuffs Determination of residues of organochlorine pesticides Gas chromatographic method |
| ISO 21415-2:2015 | Wheat and wheat flour Gluten content Part 2: Determination of wet gluten and gluten index by mechanical means |
| ISO 11816-1:2013 | Milk and milk products — Determination of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks |
| EN ISO 665:2000 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| UNE-EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| ISO 12999-1:2014 | Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation |
| ISO 14244:2014 | Oilseed meals — Determination of soluble proteins in potassium hydroxide solution |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| UNE-EN ISO 11816-2:2017 | Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorimetric method for cheese (ISO 11816-2:2016) |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| UNE-EN 12697-1:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content |
| ISO 8968-4:2016 | Milk and milk products Determination of nitrogen content Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) |
| ISO 734-2:2008 | Oilseed meals Determination of oil content Part 2: Rapid extraction method |
| ISO 21571:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Nucleic acid extraction |
| ISO 663:2017 | Animal and vegetable fats and oils — Determination of insoluble impurities content |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| ISO 16050:2003 | Foodstuffs Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products High-performance liquid chromatographic method |
| UNE-EN ISO 7784-3:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016) |
| UNE-EN 15550:2018 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| ISO 5530-1:2013 | Wheat flour Physical characteristics of doughs Part 1: Determination of water absorption and rheological properties using a farinograph |
| ISO 12625-16:2015 | Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method |
| ISO 15301:2001 | Animal and vegetable fats and oils — Determination of sediment in crude fats and oils — Centrifuge method |
| UNE-EN ISO 11979-3:2013 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 5529:2007 | Wheat — Determination of the sedimentation index — Zeleny test |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| ISO 18854:2015 | Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions |
| ISO 15303:2001 | Animal and vegetable fats and oils — Detection and identification of a volatile organic contaminant by GC/MS |
| ISO 14891:2002 | Milk and milk products Determination of nitrogen content Routine method using combustion according to the Dumas principle |
| ISO 22118:2011 | Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens — Performance characteristics |
| ISO 5943:2006 | Cheese and processed cheese products — Determination of chloride content — Potentiometric titration method |
| ISO 10539:2002 | Animal and vegetable fats and oils — Determination of alkalinity |
| ISO 3727-2:2001 | Butter — Determination of moisture, non-fat solids and fat contents — Part 2: Determination of non-fat solids content (Reference method) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| UNE 56810 :2002 | Wood flooring. Installation. Specifications. |
| ISO 9913-2:2000 | Optics and optical instruments Contact lenses Part 2: Determination of oxygen permeability and transmissibility by the coulometric method |
| ISO 15304:2002 | Animal and vegetable fats and oils Determination of the content of trans fatty acid isomers of vegetable fats and oils Gas chromatographic method |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| ISO 22174:2005 | Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens General requirements and definitions |
| ISO 22959:2009 | Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection |
| ISO 16472:2006 | Animal feeding stuffs — Determination of amylase-treated neutral detergent fibre content (aNDF) |
| BS EN ISO 7027:2000 | Water quality. Determination of turbidity |
| ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| ISO 6321:2002 | Animal and vegetable fats and oils Determination of melting point in open capillary tubes (slip point) |
| ISO 11876:2010 | Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method |
| ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method |
| BS EN 13370:2003 | Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN<sup>-</sup>, F<sup>-</sup> |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| ISO 14501:2007 | Milk and milk powder Determination of aflatoxin M1 content Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| UNE-EN ISO 534:2012 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| BS EN ISO 5983-2:2009 | Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content Block digestion and steam distillation method |
| UNE-EN ISO 9614-3:2010 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| ISO 5537:2004 | Dried milk — Determination of moisture content (Reference method) |
| BS EN ISO 15753:2016 | Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons |
| DIN EN 15550:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| DIN EN ISO 21570:2013-08 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005 + Cor 1:2006 + Amd 1:2013) |
| UNE-EN ISO 17932:2012 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| UNE-EN ISO 12625-3:2015 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| ISO 16634-1:2008 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 1: Oilseeds and animal feeding stuffs |
| ISO 22630:2015 | Oilseed meals Determination of oil content Rapid extraction method |
| BS EN ISO 11816-1:2013 | Milk and milk products. Determination of alkaline phosphatase activity Fluorimetric method for milk and milk-based drinks |
| BS EN ISO 14565:2001 | Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO 5983-2:2009 | Animal feeding stuffs Determination of nitrogen content and calculation of crude protein content Part 2: Block digestion and steam distillation method |
| BS EN ISO 663:2017 | Animal and vegetable fats and oils. Determination of insoluble impurities content |
| BS EN 15022-3:2006 | Copper and copper alloys. Determination of tin content Low tin content. Flame atomic absorption spectrometry method (FAAS) |
| ISO 27107:2008 | Animal and vegetable fats and oils Determination of peroxide value Potentiometric end-point determination |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| ISO 9832:2002 | Animal and vegetable fats and oils — Determination of residual technical hexane content |
| BS EN 13130-5:2004 | Materials and articles in contact with foodstuffs. Plastics substances subject to limitation Determination of vinylidene chloride in food simulants |
| BS EN ISO 11979-3:2012 | Ophthalmic implants. Intraocular lenses Mechanical properties and test methods |
| ISO 5536:2009 | Milk fat products — Determination of water content — Karl Fischer method |
| BS EN ISO 15788-1:2001 | Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils Method using capillary-column gas chromatography (Reference method) |
| BS EN ISO 10539:2002 | Animal and vegetable fats and oils. Determination of alkalinity |
| ISO 9936:2016 | Animal and vegetable fats and oils Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography |
| BS EN ISO 15304:2002 | Animal and vegetable fats and oils. Determination of the content of trans fatty acid isomers of vegetable fats and oil. Gas chromatographic method |
| ISO 7027-1:2016 | Water quality Determination of turbidity Part 1: Quantitative methods |
| ISO 4625-1:2004 | Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
| BS EN ISO 12625-7:2014 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
| ISO 7932:2004 | Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of presumptive Bacillus cereus Colony-count technique at 30 degrees C |
| UNI EN 12697-1 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| ISO 13906:2008 | Animal feeding stuffs — Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| BS EN 12697-1:2012 | Bituminous mixtures. Test methods for hot mix asphalt Soluble binder content |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| ISO 10520:1997 | Native starch — Determination of starch content — Ewers polarimetric method |
| ISO 8420:2002 | Animal and vegetable fats and oils — Determination of content of polar compounds |
| ISO 24276:2006 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products General requirements and definitions |
| ISO 6647-1:2015 | Rice Determination of amylose content Part 1: Reference method |
| ISO 6885:2016 | Animal and vegetable fats and oils Determination of anisidine value |
| ISO 21068-1:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation |
| BS EN ISO 15839:2006 | Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests |
| ISO 16035:2003 | Animal and vegetable fats and oils — Determination of low-boiling halogenated hydrocarbons in edible oils |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| IEC 62563-1:2009+AMD1:2016 CSV | Medical electrical equipment - Medical image display systems - Part1: Evaluation methods |
| UNE-EN ISO 29841:2014 | Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009) |
| ISO 8534:2017 | Animal and vegetable fats and oils — Determination of water content — Karl Fischer method (pyridine free) |
| BS EN 14937-1:2006 | Copper and copper alloys. Determination of antimony content Spectrophotometric method |
| ISO 17189:2003 | Butter, edible oil emulsions and spreadable fats — Determination of fat content (Reference method) |
| ISO 29822:2009 | Vegetable fats and oils Isomeric diacylglycerols Determination of relative amounts of 1,2- and 1,3-diacylglycerols |
| ISO 20227:2017 | Water quality — Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture independent microbiotest |
| IEC 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| ISO 16634-2:2016 | Food products — Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products |
| BS EN ISO 3727-2:2002 | Butter. Determination of moisture, non-fat solids and fat contents Determination of non-fat solids content (Reference method) |
| ISO 13366-2:2006 | Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters |
| UNE-EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 2171:2007 | Cereals, pulses and by-products — Determination of ash yield by incineration |
| BS EN 12441-2:2002 | Zinc and zinc alloys. Chemical analysis Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method |
| BS EN ISO 10723:2012 | Natural gas. Performance evaluation for analytical systems |
| ISO 12779:2011 | Lactose — Determination of water content — Karl Fischer method |
| ISO 12836:2015 | Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
| I.S. EN 12697-1:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| ISO 11132:2012 | Sensory analysis Methodology Guidelines for monitoring the performance of a quantitative sensory panel |
| BS EN 1109:2013 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature |
| UNE-EN ISO 11816-1:2014 | Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2013) |
| BS EN ISO 8968-3:2007 | Milk. Determination of nitrogen content Block-digestion method (Semi-micro rapid routine method) |
| ISO 15753:2016 | Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons |
| DIN EN 15510:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| BS EN ISO 11609:2017 | Dentistry. Dentifrices. Requirements, test methods and marking |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| UNE-EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| ISO 11979-3:2012 | Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
| BS EN 14939:2006 | Copper and copper alloys. Determination of beryllium content. FAAS Method |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| BS EN ISO 12228:1999 | Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method |
| BS EN ISO 12947-2:2016 | Textiles. Determination of the abrasion resistance of fabrics by the Martindale method Determination of specimen breakdown |
| BS EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment |
| BS EN ISO 10338:1998 | Optics and optical instruments. Contact lenses. Determination of curvature |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 19219:2002 | Animal and vegetable fats and oils — Determination of visible foots in crude fats and oils |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| BS EN ISO 8968-4:2016 | Milk and milk products. Determination of nitrogen content Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) |
| UNE-EN ISO 12625-6:2017 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| ISO 20743:2013 | Textiles Determination of antibacterial activity of textile products |
| ISO/TS 17764-2:2002 | Animal feeding stuffs — Determination of the content of fatty acids — Part 2: Gas chromatographic method |
| ISO 15914:2004 | Animal feeding stuffs — Enzymatic determination of total starch content |
| UNE-EN ISO 2178:2017 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| ISO 29841:2009 | Vegetable fats and oils Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) |
| BS EN 13657:2002 | Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements |
| UNE-EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| BS EN ISO 5537:2004 | Dried milk. Determination of moisture content (reference method) |
| ISO 10534-2:1998 | Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 2: Transfer-function method |
| UNE-EN ISO 8968-4:2016 | Milk and milk products - Determination of nitrogen content - Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) (ISO 8968-4:2016) |
| UNE-ISO 3781:2015 | Paper and board - Determination of tensile strength after inmersion in water |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| ISO 7784-3:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
| UNE-EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| BS EN ISO 6321:2002 | Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point) |
| BS EN ISO 140-5:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
| ISO 8292-1:2008 | Animal and vegetable fats and oils Determination of solid fat content by pulsed NMR Part 1: Direct method |
| BS EN ISO 15197:2015 | In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| BS EN ISO 7932:2004 | Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of presumptive Bacillus cereus. Colony-count technique at 30°C |
| ISO 5983-1:2005 | Animal feeding stuffs Determination of nitrogen content and calculation of crude protein content Part 1: Kjeldahl method |
| DIN EN ISO 21569:2013-08 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods (ISO 21569:2005 + Amd 1:2013) (includes Amendment :2013) |
| DIN EN ISO 14902:2002-02 | Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products (ISO 14902:2001); English version of DIN EN ISO 14902 |
| DIN EN ISO 734-2:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 535:2014 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| EN ISO 11816-1:2013 | Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2013) |
| EN 15915:2010 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 5536:2013 | Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) |
| EN ISO 15753:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (ISO 15753:2016) |
| EN 14865-1:2009+A1:2010 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| EN 15690-2:2009 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 5983-1:2005/AC:2009 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 1: KJELDAHL METHOD (ISO 5983-1:2005/Cor 1:2008) |
| EN ISO 16634-1:2008 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008) |
| EN 13725:2003/AC:2006 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| EN 15055:2006 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method |
| EN ISO 22160:2007 | Milk and milk-based drinks - Determination of alkaline phosphatase activity - Enzymatic photo-activated system (EPAS) method (ISO 22160:2007) |
| EN 15764:2009 | Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| EN ISO 22174:2005 | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions (ISO 22174:2005) |
| EN ISO 14181 : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOCHLORINE PESTICIDES - GAS CHROMATOGRAPHIC METHOD (ISO 14181:2000) |
| EN ISO 14902:2001 | Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products (ISO 14902:2001) |
| EN 14524:2004 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| ONORM EN ISO 13468-2 : 2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| EN ISO 1974:2012 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| EN 14937-2:2006 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| EN ISO 21415-2:2015 | Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015) |
| EN ISO 534:2011 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN ISO 734:2015 | Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) |
| EN ISO 9614-2 : 1996 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
| EN ISO 659:2009 | Oilseeds - Determination of oil content (Reference method) (ISO 659:2009) |
| EN 15022-3:2006 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| EN 14888:2005 | Fertilizers and liming materials - Determination of cadmium content |
| EN ISO 16472:2006 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) (ISO 16472:2006) |
| EN ISO 21570:2005/A1:2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005/AMD 1:2013) |
| EN ISO 10539 : 2002 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ALKALINITY |
| EN ISO 11819-1:2001 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997) |
| EN ISO 21569 : 2005 AMD 1 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS (ISO 21569:2005/AMD 1:2013) |
| EN ISO 10338 : 1997 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| EN ISO 16014-5:2012 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012) |
| EN ISO 22118:2011 | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics (ISO 22118:2011) |
| EN 13925-1:2003 | Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles |
| EN 16711-2:2015 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| EN 14939:2006 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN 15905:2010 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
| EN ISO 8968-2 : 2001 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 2: BLOCK-DIGESTION METHOD (MACRO METHOD) |
| EN ISO 8968-5 : 2001 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 5: DETERMINATION OF PROTEIN-NITROGEN CONTENT |
| EN ISO 15301:2001/AC:2007 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SEDIMENT IN CRUDE FATS AND OILS - CENTRIFUGE METHOD (ISO 15301:2001/Cor 1:2007) |
| EN ISO 16035 : 2005 | Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils (ISO 16035:2003) |
| EN ISO 15310:2005 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN ISO 17189:2003 | Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003) |
| EN ISO 17932:2011 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| EN 13649:2001 | Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN 15170:2008 | Characterization of sludges - Determination of calorific value |
| EN 16117-2:2012 | Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 % |
| EN 14185-2:2006 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN ISO 11543:2002 | Modified starch - Determination of hydroxypropyl content - Method using proton Nuclear Magnetic Resonance (NMR) spectrometry (ISO 11543:2000) |
| EN ISO 5943:2006 | Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2006) |
| EN 16841-1:2016 | Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid method |
| EN 16117-1:2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| EN 15765:2009 | Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion |
| EN ISO 10723:2012 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| EN ISO 13906:2008 | Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents (ISO 13906:2008) |
| EN ISO 15350:2010 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| EN ISO 27107:2010 | Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15 ) |
| EN ISO 16931:2009 | Animal and vegetable fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2009) |
| EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
| EN 16024:2011 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| EN 16378:2013 | Cereals - Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) |
| EN ISO 3727-1 : 2001 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 1: DETERMINATION OF MOISTURE CONTENT (REFERENCE METHOD) |
| EN ISO 12228 : 1999 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD |
| EN 15703-2 : 2014 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| EN 14936-2:2006 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| EN 15909:2010 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 15428:2007 | Soil improvers and growing media - Determination of particle size distribution |
| EN ISO 11689:1996/AC:2009 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007) |
| EN ISO 10519:2015 | Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO 10519:2015) |
| EN ISO 16017-1:2000 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN ISO 3035:2011 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| EN 16711-1:2015 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| EN ISO 12873:2014 | Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography (ISO 12873:2010) |
| EN ISO 14182 : 1999 | ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD |
| EN ISO 5764:2009 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
| EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| EN ISO 16638-1:2017 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| EN ISO 6869 : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENTS OF CALCIUM, COPPER, IRON, MAGNESIUM, MANGANESE, POTASSIUM, SODIUM AND ZINC - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| EN 15585:2008 | Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains |
| EN ISO 9832:2003 | Animal and vegetable fats and oils - Determination of residual technical hexane content (ISO 9832:2002) |
| EN ISO 734-2:2010 | Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:2008, corrected version 2009-06-01) |
| EN 15704:2008 | Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water |
| EN 13925-2:2003 | Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures |
| EN ISO 8534:2017 | Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2017) |
| EN ISO 7027 : 1999 | WATER QUALITY - DETERMINATION OF TURBIDITY |
| EN 16075:2011 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| EN ISO 13884:2005 | Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003) |
| EN ISO 12872:2014 | Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010) |
| EN 16279:2012 | Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) |
| EN ISO 15839:2006 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003) |
| EN ISO 5529:2010 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 11085:2015 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
| EN 932-6:1999 | Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility |
| EN ISO 7027-1:2016 | Water quality - Determination of turbidity - Part 1: Quantitative methods (ISO 7027-1:2016) |
| EN ISO 10565:1998 | Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry (ISO 10565:1998) |
| EN ISO 11876:2010 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| EN 14941:2006 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| EN ISO 8292-2:2010 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 2: Indirect method (ISO 8292-2:2008) |
| EN 16357:2013 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| EN 15916-2:2010 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN 14936-1:2006 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| EN ISO 10534-2:2001 | Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 2: Transfer-function method (ISO 10534-2:1998) |
| EN ISO 6320:2017 | Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2017) |
| EN ISO 663:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN ISO 12836:2015 | Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
| EN ISO 8420:2002/AC:2008 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONTENT OF POLAR COMPOUNDS (ISO 8420:2002) |
| EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN ISO 24276:2006/A1:2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS (ISO 24276:2006/AMD 1:2013) |
| EN ISO 15914:2005 | Animal feeding stuffs - Enzymatic determination of total starch content (ISO 15914:2004) |
| EN ISO 6865 : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION |
| EN ISO 489:1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| EN ISO 662:2016 | Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:2016) |
| EN 16487 : 2014 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| EN ISO 9913-2 : 2000 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - PART 2 - DETERMINATION OF OXYGEN PERMEABILITY AND TRANSMISSIBILITY BY THE COULOMETRIC METHOD |
| EN ISO 8292-1:2010 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 1: Direct method (ISO 8292-1:2008) |
| EN 14935:2006 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| EN 16278:2012 | Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) |
| EN ISO 21068-1:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) |
| EN ISO 14891 : 2002 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - ROUTINE METHOD USING COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE |
| EN ISO 5983-2:2009 | Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion and steam distillation method (ISO 5983-2:2009) |
| EN 14907:2005 | Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
| EN ISO 712:2009 | Cereals and cereal products - Determination of moisture content - Reference method (ISO 712:2009) |
| EN ISO 6974-1:2012/AC:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012) |
| EN ISO 658 : 2002 | OILSEEDS - DETERMINATION OF CONTENT OF IMPURITIES |
| EN ISO 10520:1998 | Native starch - Determination of starch content - Ewers polarimetric method (ISO 10520:1997) |
| EN ISO 21571:2005/A1:2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION (ISO 21571:2005/AMD 1:2013) |
| EN 15510:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES |
| EN ISO 5534:2004/AC:2013 | CHEESE AND PROCESSED CHEESE - DETERMINATION OF THE TOTAL SOLIDS CONTENT (REFERENCE METHOD) |
| EN ISO 11214:1996 | Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996) |
| EN ISO 14244:2016 | Oilseed meals - Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014) |
| I.S. EN ISO 489:1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 6885:2016 | Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2016) |
| EN 13925-3:2005 | Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments |
| EN ISO 10720:2007 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| EN ISO 18854:2015 | Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
| EN ISO 17059:2009 | Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007) |
| EN ISO 9936:2016 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOCOPHEROL AND TOCOTRIENOL CONTENTS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9936:2016) |
| EN 1608:2013 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| EN ISO 8655-1:2002/AC:2009 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| EN ISO 5530-1:2014 | Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013) |
| EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| EN ISO 11702:2016 | Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2016) |
| EN ISO 15788-2 : 2004 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF STIGMASTADIENES IN VEGETABLE OILS - PART 2: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| EN ISO 8968-3:2007 | Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) (ISO 8968-3:2004) |
| EN ISO 11701:2009 | Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) |
| EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| EN 14942-2:2006 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| EN ISO 15303:2008 | Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS (ISO 15303:2001) |
| EN ISO 11816-2:2016 | Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorimetric method for cheese (ISO 11816-2:2016) |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| EN ISO 21872-1:2017 | Microbiology of the food chain - Horizontal method for the determination of Vibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO 21872-1:2017) |
| I.S. EN 13725:2003 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| EN 14984:2016 | Liming materials - Determination of product effect on soil pH - Soil incubation method |
| EN ISO 3727-2 : 2001 | BUTTER - DETERMINATION OF MOISTURE, NON-FAT SOLIDS AND FAT CONTENTS - PART 2: DETERMINATION OF NON-FAT SOLIDS CONTENT (REFERENCE METHOD) (ISO 3727-2:2001) |
| EN 15688:2008 | Fertilizers - Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) |
| EN ISO 6867 : 2000 | Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000) |
| EN ISO 13900:2002 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
| EN ISO 4625-2:2006 | Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004) |
| EN ISO 17678:2010 | Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010) |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| EN 14627:2005 | Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
| EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 15054:2006 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
| EN 13612:2002/AC:2002 | PERFORMANCE EVALUATION OF IN VITRO DIAGNOSTIC MEDICAL DEVICES |
| EN ISO 7784-3:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016) |
| EN ISO 12228-2:2014 | Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) |
| EN ISO 20227:2017 | Water quality - Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza - Method using a stock culture independent microbiotest (ISO 20227:2017) |
| EN ISO 14637:2006 | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN ISO 13468-1:1996 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| EN 14940-2:2006 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
| EN ISO 12779:2013 | Lactose - Determination of water content - Karl Fischer method (ISO 12779:2011) |
| EN ISO 22959:2009 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009) |
| EN 15622:2010 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| 15/30287635 DC : 0 | BS ISO 18862 - ANALYSIS OF COFFEE AND COFFEE PRODUCTS - DETERMINATION OF ACRYLAMIDE - METHODS USING HPLC-MS/MS AND GC-MS AFTER DERIVATISATION |
| I.S. CEN ISO TS 21432:2005 | NON-DESTRUCTIVE TESTING - STANDARDS TEST METHOD FOR DETERMINING RESIDUAL STRESSES BY NEUTRON DIFFRACTION |
| I.S. EN 15023-3:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| BS EN 61391-1 : 2006 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 1: TECHNIQUES FOR CALIBRATING SPATIAL MEASUREMENT SYSTEMS AND MEASUREMENT OF SYSTEM POINT-SPREAD FUNCTION RESPONSE |
| DIN EN ISO 22630 E : 2016 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - RAPID EXTRACTION METHOD (ISO 22630:2015) |
| BS ISO 22935-3:2009 | Milk and milk products. Sensory analysis Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring |
| 12/30245291 DC : 0 | BS ISO 16578 - MOLECULAR BIOMARKER ANALYSIS - GENERAL DEFINITIONS AND REQUIREMENTS FOR MICROARRAY DETECTION OF SPECIFIC NUCLEIC ACID SEQUENCES |
| 04/30116845 DC : DRAFT JUL 2004 | ISO 18252 - ANHYDROUS MILK FAT - DETERMINATION OF STEROL COMPOSITION BY GAS LIQUID CHROMATOGRAPHY (ROUTINE METHOD) |
| 13/30247449 DC : 0 | BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| PREN 1109 : DRAFT 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURE |
| DIN EN 14938-2:2010-12 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| PREN ISO 8968-1 : DRAFT 2013 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT AND CRUDE PROTEIN CALCULATION - PART 1: KJELDAHL PRINCIPLE (ISO/DIS 8968-1:2013) |
| I.S. EN ISO 5534:2004 | CHEESE AND PROCESSED CHEESE - DETERMINATION OF THE TOTAL SOLIDS CONTENT (REFERENCE METHOD) |
| DIN EN 16711-2:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| DIN EN ISO 12872:2014-07 | Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010) |
| DIN EN ISO 29822 E : 2014 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| 08/30179307 DC : DRAFT MAY 2008 | BS EN 15477 - FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| BS EN ISO 20227:2017 | Water quality. Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza. Method using a stock culture independent microbiotest |
| 13/30241784 DC : 0 | BS EN ISO 6647-2 - RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS |
| BS ISO 5985 : 2002 | ANIMAL FEEDING STUFFS - DETERMINATION OF ASH INSOLUBLE IN HYDROCHLORIC ACID |
| I.S. EN ISO 12228-1:2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| 07/30169420 DC : 0 | BS ISO 13885-1 - BINDERS FOR PAINTS AND VARNISHES - GEL PERMEATION CHROMATOGRAPHY (GPC) - PART 1: TETRAHYDROFURAN (THF) AS ELUENT |
| BS ISO 3034:2011 | Corrugated fibreboard. Determination of single sheet thickness |
| BS ISO 5660-1:2015 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| DD CEN/TS 15916-1:2011 | Copper and copper alloys. Determination of tellurium content Low tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 15023-3:2010-12 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| 17/30323191 DC : DRAFT JAN 2017 | BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS |
| DIN EN 14865-1:2011-01 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010) |
| ISO 14377:2002 | Canned evaporated milk Determination of tin content Method using graphite furnace atomic absorption spectrometry |
| 10/30202166 DC : 0 | BS ISO 6646 - RICE - DETERMINATION OF THE POTENTIAL MILLING YIELD FROM PADDY AND FROM HUSKED RICE |
| 09/30203049 DC : 0 | BS EN 10351 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN (ROUTINE METHOD) |
| ISO 11285:2004 | Milk Determination of lactulose content Enzymatic method |
| UNI EN 16075 : 2012 | FERTILIZERS - DETERMINATION OF N-(2-NITROPHENYL)PHOSPHORIC TRIAMIDE (2-NPT) IN UREA AND FERTILIZERS CONTAINING UREA - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| BS EN 15909:2010 | Fertilizers. Determination of calcium and formate in calcium foliar fertilizers |
| BS ISO 11814:2002 | Dried milk. Assessment of heat treatment intensity. Method using high-performance liquid chromatography |
| 07/30163034 DC : 0 | BS EN 14940-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| UNI EN 15479 : 2009 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| BS ISO 6885 : 2006 AMD 17393 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE |
| DIN EN 16117-2:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| BS 7755-3.13:1998 | Soil quality. Chemical methods Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods |
| I.S. EN 15478:2009 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| 02/101726 DC : 0 | PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE |
| DIN 51869:2000-09 | TESTING OF GASEOUS FUELS AND OTHER GASES - DETERMINATION OF WATER CONTENT ACCORDING TO KARL FISCHER - COULOMETRIC METHOD |
| BS ISO 13899-2:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of Nb Content |
| BS EN ISO 5530-1:2014 | Wheat flour. Physical characteristics of doughs Determination of water absorption and rheological properties using a farinograph |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| I.S. EN ISO 4934:2004 | STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| BS ISO 5529 : 2007 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| BS ISO 15350 : 2001 | DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACES (ROUTINE METHOD) |
| PREN 15477 : DRAFT 2015 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| DIN EN ISO 22959:2009-10 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009) |
| BS ISO 17059 : 2007 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| 13/30291170 DC : 0 | BS EN 10361 - ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| 97/402028 DC : DRAFT FEB 1997 | BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION |
| BS ISO 18632:2010 | Alloyed steel. Determination of manganese. Potentiometric and visual titration method |
| BS EN ISO 22118:2011 | Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens. Performance characteristics |
| PD CEN/TR 10354:2011 | Chemical analysis of ferrous Materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| S.R. CEN/TR 10353:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF AL, TI AND P BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| BS EN ISO 21872-1:2017 | Microbiology of the food chain. Horizontal method for the determination of Vibrio spp. Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus |
| 03/300954 DC : DRAFT JAN 2003 | BS ISO 8968-3 - MILK - DETERMINATION OF NITROGEN CONTENT - PART 3: BLOCK-DIGESTION METHOD - SEMI-MICRO RAPID ROUTINE METHOD |
| 14/30219261 DC : 0 | BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
| 02/704628 DC : DRAFT APR 2002 | BS ISO 11285 (IDF 175) - MILK - DETERMINATION OF LACTULOSE CONTENT - ENZYMATIC METHOD |
| BS ISO 24512:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| BS EN ISO 18854:2015 | Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions |
| UNI ISO/TR 22971 : 2008 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PRACTICAL GUIDANCE FOR THE USE OF ISO 5725-2:1994 IN DESIGNING, IMPLEMENTING AND STATISTICALLY ANALYSING INTER-LABORATORY REPEATABILITY AND REPRODUCIBILITY RESULTS |
| 11/30213827 DC : 0 | BS EN ISO 10723 - NATURAL GAS - PERFORMANCE EVALUATION FOR ON-LINE ANALYTICAL SYSTEMS |
| UNI EN ISO 17932 : 2011 | PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN ISO 20179:2007-10 | Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) |
| BS EN ISO 712:2009 | Cereals and cereal products. Determination of moisture content. Reference method |
| DIN EN 16711-1 E : 2016 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| ISO 6730:2005 | Milk Enumeration of colony-forming units of psychrotrophic microorganisms Colony-count technique at 6,5 degrees C |
| BS 7208-7(1998) : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| I.S. CEN TS 15478:2006 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| 03/307065 DC : DRAFT APR 2003 | ISO 8069 - DRIED MILK - DETERMINATION OF CONTENT OF LACTIC ACID AND LACTATES |
| I.S. EN ISO 3960:2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - IODOMETRIC (VISUAL) ENDPOINT DETERMINATION (ISO 3960:2017) |
| DIN EN 15703-2:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 14/30293538 DC : 0 | BS EN 14793 - STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH THE REFERENCE METHOD |
| 06/30154473 DC : DRAFT AUG 2006 | EN 15550 - ANIMAL FEEDING STUFFS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GFAAS) AFTER PRESSURE DIGESTION |
| 03/101986 DC : DRAFT JAN 2003 | BS EN ISO 17201-1 - ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: SOUND SOURCE ENERGY DETERMINATION OF MUZZLE BLAST |
| PD CEN/TS 16817-1:2015 | Ambient air. Monitoring the effects of genetically modified organisms (GMO). Pollen monitoring Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler |
| 08/30176577 DC : DRAFT JAN 2008 | BS ISO 16931 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIGLYCERIDES CONTENT BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| BS EN 15750:2009 | Fertilizers. Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| DIN EN ISO 734:2016-05 | Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) |
| DIN EN ISO 5530-1 E : 2015 | WHEAT FLOUR - PHYSICAL CHARACTERISTICS OF DOUGHS - PART 1: DETERMINATION OF WATER ABSORPTION AND RHEOLOGICAL PROPERTIES USING A FARINOGRAPH (ISO 5530-1:2013) |
| BS ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| 04/30098572 DC : DRAFT NOV 2004 | EN 12441-11 - ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 11: DETERMINATION OF SILICON IN ZINC ALLOYS - SPECTROPHOTOMETRIC METHOD |
| ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
| I.S. EN ISO 17059:2009 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| 13/30283977 DC : 0 | BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR |
| 16/30282355 DC : 0 | BS ISO 35103 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - ENVIRONMENTAL MONITORING |
| BS ISO 12817:2013 | Fibre-reinforced plastic composites. Determination of open-hole compression strength |
| DIN ISO 3034:2016-08 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| DIN EN ISO 18113-1:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| 14/30309972 DC : 0 | BS EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| S.R. CEN/TS 16817-1:2015 | AMBIENT AIR - MONITORING THE EFFECTS OF GENETICALLY MODIFIED ORGANISMS (GMO) - POLLEN MONITORING - PART 1: TECHNICAL POLLEN SAMPLING USING POLLEN MASS FILTER (PMF) AND SIGMA-2-SAMPLER |
| BS ISO 14707:2015 | Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use |
| PD CEN/TR 10353:2011 | Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
| ISO 28218:2010 | Radiation protection Performance criteria for radiobioassay |
| BS ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| BS 6782-14:1999 | Binders for paints Gel permeation chromatography (GPC) with tetrahydrofuran (THF) as eluent |
| ISO 24510:2007 | Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users |
| 07/30163272 DC : 0 | BS ISO 8260 - MILK AND MILK PRODUCTS - DETERMINATION OF ORGANOCHLORINE PESTICIDES AND POLYCHLOROBIPHENYLS - METHOD USING CAPILLARY GAS-LIQUID CHROMATOGRAPHY WITH ELECTRON-CAPTURE DETECTION |
| 08/30193443 DC : 0 | BS EN ISO 11701 - VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHOLIPIDS IN LECITHINS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC)USING A LIGHT SCATTERING DETECTOR |
| ASTM F 3209 : 2016 | Standard Guide for Autologous Platelet-Rich Plasma for Use in Tissue Engineering and Cell Therapy |
| 14/30254288 DC : 0 | BS ISO 11816-2 - MILK AND MILK PRODUCTS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - PART 2: FLUOROMETRIC METHOD FOR CHEESE |
| BS 6200-3.22.4(1997) : 1997 | SAMPLING AND ANALYSIS OF IRON, STEEL AND OTHER FERROUS METALS - METHODS OF ANALYSIS - DETERMINATION OF NITROGEN - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| BS ISO 17997-2:2004 | Milk. Determination of casein-nitrogen content Direct method |
| BS ISO 5738:2004 | Milk and milk products. Determination of copper content. Photometric method. (Reference method) |
| 07/30163951 DC : 0 | BS EN 15688 - FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| ISO 6851:2001 | Photography Processing waste Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS ISO 14380:2011 | Water quality. Determination of the acute toxicity to Thamnocephalus platyurus (Crustacea, Anostraca) |
| BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
| UNE-EN ISO 6883:2017 | Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017) |
| DIN EN 16711-1:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| 03/106874 DC : DRAFT APR 2003 | EN 12441-9 - ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 9: DETERMINATION OF NICKEL IN ZINC ALLOYS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN ISO 734:2015 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) (ISO 734:2015) |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| 04/30107183 DC : DRAFT FEB 2004 | ISO 5983-1 - ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 1: KJELDAHL METHOD |
| BS EN ISO 8292-2:2010 | Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR Indirect method |
| DIN EN ISO 20227 E : 2017 | WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST (ISO 20227:2017) |
| BS 684-2.53(2001) : 2001 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SEDIMENT IN CRUDE FATS AND OILS - CENTRIFUGE METHOD |
| 12/30259105 DC : 0 | BS EN 826 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
| BS EN ISO 27107:2010 | Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination |
| 07/30160809 DC : 0 | BS EN 15637 - FOODS OF PLANT ORIGIN - DETERMINATION OF PESTICIDE RESIDUES USING LC-MS/MS FOLLOWING METHANOL EXTRACTION AND CLEAN-UP USING DIATOMACEOUS EARTH |
| BS ISO 29301:2017 | Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures |
| BIS IS 16143-1 : 2014 | HARD COAL AND COKE - MECHANICAL SAMPLING - PART 1: GENERAL INTRODUCTION |
| 03/303828 DC : DRAFT APR 2003 | ISO 5738 - MILK AND MILK PRODUCTS - DETERMINATION OF COPPER CONTENT - PHOTOMETRIC METHOD (REFERENCE METHOD) |
| ANSI/AAMI BE83:2006(R2011) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| UNE-EN 16075:2012 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| 13/30255962 DC : 0 | BS EN ISO 12228-1 - DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS |
| UNE-EN ISO 18739:2016 | Dentistry - Vocabulary of process chain for CAD/CAM systems (ISO 18739:2016) |
| I.S. EN ISO 16634-2:2016 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 2: CEREALS, PULSES AND MILLED CEREAL PRODUCTS (ISO 16634-2:2016) |
| BS ISO 11285:2004 | Milk. Determination of lactulose content. Enzymatic method |
| BS EN 16711-2:2015 | Textiles. Determination of metal content Determination of metals extracted by acidic artificial perspiration solution |
| 10/30212880 DC : 0 | BS ISO 27871 - CHEESE AND PROCESSED CHEESE - DETERMINATION OF THE NITROGENOUS FRACTIONS |
| 13/30241781 DC : 0 | BS EN ISO 6647-1 - RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD |
| 01/701308 DC : DRAFT FEB 2001 | ISO 14674/IDF 190 - MILK AND MILK POWDER - DETERMINATION OF AFLATOXIN M1 CONTENT - CLEAN-UP BY IMMUNOAFFINITY CHROMATOGRAPHY AND DETERMINATION BY THIN LAYER CHROMATOGRAPHY |
| UNE-EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| PREN ISO 12625-3 : DRAFT 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
| 03/309700 DC : DRAFT JULY 2003 | BS ISO 8199 - WATER QUALITY - GUIDE TO THE ENUMERATION OF MICRO-ORGANISMS BY CULTURE |
| BS ISO 17239:2004 | Fruits, vegetables and derived products. Determination of arsenic content. Method using hydride generation atomic absorption spectrometry |
| DIN EN 15476:2009-04 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| DIN EN ISO 22630:2016-05 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - RAPID EXTRACTION METHOD (ISO 22630:2015) |
| 99/715416 DC : DRAFT NOV 99 | ISO 16140 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| DD ISO/TS 21749:2005 | Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
| 11/30246475 DC : 0 | BS EN 16357 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| BS ISO 11843-7:2012 | Capability of detection Methodology based on stochastic properties of instrumental noise |
| UNI CEN/TS 15750 : 2008 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN FERTILIZERS CONTAINING NITROGEN ONLY AS NITRIC, AMMONIACAL AND UREA NITROGEN BY TWO DIFFERENT METHODS |
| DD ISO/TS 17193 : 2011 | MILK - DETERMINATION OF THE LACTOPEROXIDASE ACTIVITY - PHOTOMETRIC METHOD (REFERENCE METHOD) |
| 07/30171415 DC : 0 | BS ISO 22118 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION OF FOOD-BORNE PATHOGENS - PERFORMANCE CHARACTERISTICS OF MOLECULAR DETECTION METHODS |
| 16/30334062 DC : 0 | BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
| 08/30164911 DC : DRAFT JUNE 2008 | BS EN 12390-7 - TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| PD CEN/TS 16318:2012 | Fertilizers. Determination of trace elements. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
| UNI EN ISO 3035 : 2012 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| BS ISO 18329:2004 | Milk and milk products. Determination of furosine content. Ion-pair reverse-phase high-performance liquid chromatography method |
| ISO 20193:2012 | Tobacco and tobacco products Determination of the width of the strands of cut tobacco |
| DIN EN ISO 15350:2010-08 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| BS EN ISO 535:2014 | Paper and board. Determination of water absorptiveness. Cobb method |
| DIN ISO 8243:2015-12 | CIGARETTES - SAMPLING (ISO 8243:2013) |
| BS ISO 14674:2005 | Milk and milk powder. Determination of aflatoxin M<sub>1</sub> content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatography |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| BS ISO 19983:2017 | Rubber. Determination of precision of test methods |
| BS EN 15023-3:2010 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometric method (FAAS) |
| DD CEN/TS 15023-3:2006 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometry method (FAAS) |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| UNE-EN 15023-3:2011 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| 03/305724 DC : DRAFT APR 2003 | ISO 19238 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS |
| 12/30255191 DC : 0 | BS ISO 11505 - SURFACE CHEMICAL ANALYSIS - GENERAL PROCEDURES FOR QUANTITATIVE COMPOSITIONAL DEPTH PROFILING BY GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY |
| BS EN ISO 22959:2009 | Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection |
| DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| 11/30244578 DC : DRAFT JUNE 2011 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 19824:2017 | Traditional Chinese medicine — Schisandra chinensis (Turcz.) Baill. seeds and seedlings |
| I.S. EN 15479:2009 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| ISO 20289:2018 | Surface chemical analysis — Total reflection X-ray fluorescence analysis of water |
| BS EN 15916-2:2010 | Copper and copper alloys. Determination of tellurium content Medium tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| BIS IS 16174 : 2014 | ACCEPTANCE SAMPLING PLANS AND PROCEDURES FOR THE INSPECTION OF BULK MATERIALS |
| 02/712190 DC : DRAFT DEC 2002 | ISO 24276 - FOODSTUFFS - NUCLEIC ACID BASED METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| 07/30166078 DC : 0 | BS EN 15704 - LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| BS EN ISO 15350:2010 | Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method) |
| BS EN 15704:2008 | Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water |
| 13/30257963 DC : 0 | BS EN ISO 8968-4 - MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 4: DETERMINATION OF PROTEIN AND NON PROTEIN NITROGEN CONTENT AND TRUE PROTEIN CONTENT CALCULATION (REFERENCE METHOD) |
| PD CEN/TS 16817-2:2015 | Ambient air. Monitoring the effects of genetically modified organisms (GMO). Pollen monitoring Biological pollen sampling using bee colonies |
| BS EN 15479:2009 | Fertilizers. Spectrophotometric determination of biuret in urea |
| DD CEN/TS 15475:2006 | Fertilizers. Determination of ammoniacal nitrogen |
| 13/30284324 DC : 0 | BS EN ISO 18854 - SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| BS 6200-3.31.3:2002 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 22033:2011 | Nickel alloys Determination of niobium Inductively coupled plasma/atomic emission spectrometric method |
| DIN ISO 8454:2012-02 | Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009) |
| 08/30179313 DC : DRAFT MAY 2008 | BS EN 15479 - FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| 07/30159408 DC : 0 | BS ISO 6495-1 - ANIMAL FEEDING STUFFS - DETERMINATION OF WATER-SOLUBLE CHLORIDES CONTENT - PART 1: TITRIMETRIC METHOD |
| UNI CEN/TS 15749 : 2008 | FERTILIZERS - DETERMINATION OF SULFATES CONTENT USING THREE DIFFERENT METHODS |
| DIN EN 16319 E : 2016 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICPAES) AFTER AQUA REGIA DISSOLUTION |
| 16/30339666 DC : 0 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| I.S. EN ISO 13906:2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
| 09/30195292 DC : DRAFT MAR 2009 | BS EN 15909 - FERTILIZERS - DETERMINATION OF CALCIUM AND FORMAT IN CALCIUM FOLIAR FERTILIZERS |
| BS ISO 11042-2:1996 | Gas turbines. Exhaust gas emission Automated emission monitoring |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| BS ISO 6656:2002 | Animal and vegetable fats and oils. Determination of polyethylene-type polymers |
| DIN EN ISO 12873 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| AASHTO R 61 : 2012(R2016) | PRACTICE FOR ESTABLISHING REQUIREMENTS FOR EQUIPMENT CALIBRATIONS, STANDARDIZATIONS, AND CHECKS |
| BS 4325-13(1999) : 1999 AMD 11090 | METHODS FOR ANALYSIS OF OILSEED RESIDUES - DETERMINATION OF OIL CONTENT (RAPID EXTRACTION METHOD) |
| BS EN ISO 3035:2011 | Corrugated fibreboard. Determination of flat crush resistance |
| PREN ISO 6647-2 : DRAFT 2013 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS (ISO/DIS 6647-2:2013) |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO/TS 9941:2005 | Milk and canned evaporated milk — Determination of tin content — Spectrometric method |
| PREN 12390-7 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| BS 4401-17:1998 | Methods of test for meat and meat products Determination of chloramphenicol content (liquid chromatographic method) |
| UNE-EN 10361:2016 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| 07/30163942 DC : 0 | BS EN 15690-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| BS EN 15478:2009 | Fertilizers. Determination of total nitrogen in urea |
| ISO 17925:2004 | Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
| BS 5766-20(2000) : 2000 | ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ISO 5984:2002 | Animal feeding stuffs Determination of crude ash |
| BS ISO 11843-5 : 2008 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| UNE-EN ISO 11702:2016 | Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2016) |
| 07/30143612 DC : 0 | ISO 8586-2 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE SELECTION, TRAINING AND MONITORING OF ASSESSORS - PART 2: EXPERT SENSORY ASSESSORS |
| BS ISO 14377:2002 | Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| NF ISO 27048 : 2011 | RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| BS ISO 17713-1:2007 | Meteorology. Wind measurements Wind tunnel test methods for rotating anemometer performance |
| 00/565675 DC : DRAFT DEC 2000 | BS EN ISO 17511 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| DIN EN 16378:2013-12 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| IEC TR 62697-3:2018 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 3: Test method for quantitative determination of elemental sulfur |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| CEI EN 61620 : 1999 | INSULATING LIQUIDS DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| S.R. CEN/TS 16317:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| UNI EN ISO 22118 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - POLYMERASE CHAIN REACTION (PCR) FOR THE DETECTION AND QUANTIFICATION OF FOOD-BORNE PATHOGENS - PERFORMANCE CHARACTERISTICS |
| UNI CEN/TS 15406 : 2010 | SOLID RECOVERED FUELS - DETERMINATION OF BRIDGING PROPERTIES OF BULK MATERIAL |
| DIN 10762:2004-06 | Analysis of honey - Determination of ethanol content - Enzymatic method |
| UNI EN 15621 : 2012 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| DIN EN 15476 E : 2009 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| NF EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHODS |
| UNI EN 15764 : 2010 | FOODSTUFFS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF TIN BY FLAME AND GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (FAAS AND GFAAS) AFTER PRESSURE DIGESTION |
| UNI EN 15905 : 2010 | FERTILIZERS - DETERMINATION OF 3-METHYLPYRAZOLE (MP) USING HIGH- PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| CR 10320:2004 | Optical emission analysis of low alloy steels (routine method) - Method for determination of C, Si, S, P, Mn, Cr, Ni and Cu |
| I.S. EN 15622:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 10355:2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| ISO 12344:2010 | Thermal insulating products for building applications Determination of bending behaviour |
| I.S. EN ISO 12836:2015 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| ISO 6571:2008 | Spices, condiments and herbs — Determination of volatile oil content (hydrodistillation method) |
| PREN 15616 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNE-EN ISO 16297:2014 | Milk - Bacterial count - Protocol for the evaluation of alternative methods (ISO 16297:2013) |
| UNI EN ISO 8292-1 : 2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SOLID FAT CONTENT BY PULSED NMR - PART 1: DIRECT METHOD |
| I.S. EN 16841-1:2016 | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| NF ISO 15839 : 2004 | WATER QUALITY - ON-LINE SENSORS/ANALYSING EQUIPMENT FOR WATER - SPECIFICATIONS AND PERFORMANCE TESTS |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| NF EN 14865-1 : 2009 + A1 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| ISO 29581-2:2010 | Cement Test methods Part 2: Chemical analysis by X-ray fluorescence |
| I.S. EN ISO 19238:2017 | RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS (ISO 19238:2014) |
| I.S. EN 16711-2:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| I.S. EN ISO 16634-1:2008 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 1: OILSEEDS AND ANIMAL FEEDING STUFFS |
| S.R. CEN/TR 10354:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF SI AND AL BY X-RAY FLUORESCENCE SPECTROMETRY |
| ISO 3976:2006 | Milk fat Determination of peroxide value |
| UNE-EN 15022-4:2012 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| ISO 1738:2004 | Butter — Determination of salt content |
| I.S. EN 15616:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 14793:2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| S.R. CEN/TS 16320:2012 | FERTILIZERS - DETERMINATION OF TRACE ELEMENTS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| I.S. EN ISO 21872-1:2017 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE DETECTION OF POTENTIALLY ENTEROPATHOGENIC VIBRIO SPP. - PART 1: DETECTION OF VIBRIO PARAHAEMOLYTICUS AND VIBRIO CHOLERAE (ISO 21872-1:2017) |
| I.S. EN 16378:2013 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| I.S. CEN ISO TS 17764-2:2006 | ANIMAL FEEDING STUFFS - DETERMINATION OF THE CONTENT OF FATTY ACIDS - PART 2: GAS CHROMATOGRAPHIC METHOD |
| UNI ISO 11843-7 : 2014 | CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| I.S. EN ISO 12872:2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT (ISO 12872:2010) |
| ISO 11866-2:2005 | Milk and milk products Enumeration of presumptive Escherichia coli Part 2: Colony-count technique at 44 degrees C using membranes |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO 11868:2007 | Heat-treated milk — Determination of lactulose content — Method using high-performance liquid chromatography |
| ISO 17217-1:2014 | Traditional Chinese medicine Ginseng seeds and seedlings Part 1: Panax ginseng C.A. Meyer |
| I.S. EN ISO 17201-1:2005 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
| S.R. CEN/TR 16338:2012 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - TEMPLATE FOR SUPPLYING INFORMATION ABOUT IMMUNOLOGICAL METHODS AND MOLECULAR BIOLOGICAL METHODS |
| I.S. EN ISO 12779:2013 | LACTOSE - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 12779:2011) |
| ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
| UNE-EN ISO 16050:2011 | Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method (ISO 16050:2003) |
| UNE-EN ISO 1974:2013 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| I.S. EN ISO 20227:2017 | WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST (ISO 20227:2017) |
| UNI EN 15688 : 2008 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| I.S. EN ISO 12625-15:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| NF EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| ISO 13933:2014 | Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emission spectrometric method |
| ISO 20311:2017 | Traditional Chinese medicine — Salvia miltiorrhiza seeds and seedlings |
| ISO 27085:2009 | Animal feeding stuffs Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
| ISO 11412:1998 | Carbonaceous materials for the production of aluminium Calcined coke Determination of water content |
| CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| ISO 16962:2017 | Surface chemical analysis Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| ISO 27048:2011 | Radiation protection Dose assessment for the monitoring of workers for internal radiation exposure |
| EN 15587:2008+A1:2013 | Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) |
| ISO 5550:2006 | Caseins and caseinates Determination of moisture content (Reference method) |
| EN ISO 13473-1 : 2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| UNI CEN/TS 15401 : 2010 | SOLID RECOVERED FUELS - DETERMINATION OF BULK DENSITY |
| I.S. EN ISO 15350:2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| BS EN ISO 17678:2010 | Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) |
| DIN EN 15587 E : 2014 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| I.S. EN ISO 29841:2014 | VEGETABLE FATS AND OILS - DETERMINATION OF THE DEGRADATION PRODUCTS OF CHLOROPHYLLS A AND A' (PHEOPHYTINS A, A' AND PYROPHEOPHYTINS) (ISO 29841:2009) |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| ISO 27871:2011 | Cheese and processed cheese — Determination of the nitrogenous fractions |
| UNE-EN ISO 22630:2016 | Oilseed meals - Determination of oil content - Rapid extraction method (ISO 22630:2015) |
| UNE-ISO 16532-3:2017 | Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNI EN ISO 17201-1 : 2006 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
| UNE-EN 16711-1:2016 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| UNE-EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| PREN ISO 15197 : DRAFT 2011 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| UNI EN 16328 : 2013 | FERTILIZERS - DETERMINATION OF 3,4-DIMETHYL-1H-PYRAZOLE PHOSPHATE (DMPP) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| UNE-EN 16378:2014 | Cereals - Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) |
| EN ISO 13843:2017 | Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) |
| UNI EN ISO 17678 : 2010 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| DIN EN 14726 E : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| I.S. EN 15585:2008 | CEREALS AND CEREAL PRODUCTS - DURUM WHEAT (T. DURUM DESF.) - DETERMINATION OF PERCENTAGE OF MITADINE GRAINS AND CALCULATION OF PERCENTAGE OF VITREOUS GRAINS |
| ISO 15163:2012 | Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of chymosin and bovine pepsin contents |
| EN 15024-2:2018 | Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| ISO/TS 27265:2009 | Dried milk — Enumeration of the specially thermoresistant spores of thermophilic bacteria |
| ISO 15112:2011 | Natural gas Energy determination |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| I.S. CEN TS 15475:2006 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| ISO 16578:2013 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences |
| I.S. EN ISO 10720:2007 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| BS EN 60456:2016 | Clothes washing machines for household use. Methods for measuring the performance |
| EN ISO 15195:2003 | Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
| ISO 13909-1:2016 | Hard coal and coke — Mechanical sampling — Part 1: General introduction |
| UNE-EN ISO 6571:2010 | Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) (ISO 6571:2008)) |
| ISO 26323:2009 | Milk products — Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH) |
| I.S. EN 15688:2008 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(NBUTYL) THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| ISO 6673:2003 | Green coffee — Determination of loss in mass at 105 degrees C |
| ISO 16918-1:2009 | Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| ISO 29766:2008 | Thermal insulating products for building applications — Determination of tensile strength parallel to faces |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| ISO 12080-2:2009 | Dried skimmed milk Determination of vitamin A content Part 2: Method using high-performance liquid chromatography |
| ISO 9874:2006 | Milk Determination of total phosphorus content Method using molecular absorption spectrometry |
| I.S. EN ISO 18369-3:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS (ISO 18369-3:2017, CORRECTED VERSION 2017-10-01) |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
| ISO 15648:2004 | Butter — Determination of salt content — Potentiometric method |
| I.S. EN ISO 27107:2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - POTENTIOMETRIC END-POINT DETERMINATION |
| I.S. EN 14938-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. CEN TS 15621:2007 | ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE, COBALT AND MOLYBDENUM AFTER PRESSURE DIGESTION BY ICP-AES |
| I.S. CEN TS 15477:2006 | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| BS EN 13823 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| ISO 665:2000 | Oilseeds Determination of moisture and volatile matter content |
| I.S. EN ISO 536:2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| I.S. EN ISO 21569:2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUALITATIVE NUCLEIC ACID BASED METHODS |
| EN 12441-2:2001/A2:2004 | ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 2: DETERMINATION OF MAGNESIUM IN ZINC ALLOYS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| EN 12441-1:2001/A1:2004 | ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 1: DETERMINATION OF ALUMINIUM IN ZINC ALLOYS - TITRIMETRIC METHOD |
| DIN EN 13130-2:2004-08 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 2: Determination of terephthalic acid in food simulants |
| DIN EN 14936-2:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| DIN EN ISO 10993-18 E : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| DIN EN 13130-6:2004-08 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics |
| DIN EN ISO 19219 E : 2004 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF VISIBLE FOOTS IN CRUDE FATS AND OILS |
| DIN EN 14937-1:2006-09 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| DIN EN 14937-2:2006-09 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| DIN EN ISO 15349-2:2003-09 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| DIN EN 14940-2:2006-09 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| DIN EN 12390-7:2009-07 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| DIN EN 13130-7:2004-08 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants |
| DIN EN ISO 6974-1 E : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| DIN EN 14942-2:2006-09 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| UNE-EN ISO 659:2010 | Oilseeds - Determination of oil content (Reference method) (ISO 659:2009) |
| ISO 15788-2:2003 | Animal and vegetable fats and oils Determination of stigmastadienes in vegetable oils Part 2: Method using high-performance liquid chromatography (HPLC) |
| UNE-EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| BS EN ISO 8968-2:2002 | Milk. Determination of nitrogen content Block-digestion method (Macro method) |
| ISO 3374:2000 | Reinforcement products Mats and fabrics Determination of mass per unit area |
| ISO 8968-5:2001 | Milk Determination of nitrogen content Part 5: Determination of protein-nitrogen content |
| BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
| BS EN 13656:2002 | Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO<sub>3</sub>), and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| BS EN ISO 10565:1998 | Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonance spectrometry |
| BS EN ISO 11378-2 : 2001 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST |
| BS EN ISO 8968-5:2002 | Milk. Determination of nitrogen content Determination of protein-nitrogen content |
| BS EN ISO 5764:2009 | Milk. Determination of freezing point. Thermistor cryoscope method (Reference method) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| UNE-EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| ISO 4625-2:2004 | Binders for paints and varnishes — Determination of softening point — Part 2: Cup-and-ball method |
| BS EN 15360:2007 | Fertilizers. Determination of dicyandiamide. Method using high-performance liquid chromatography (HPLC) |
| BS EN ISO 11543:2002 | Modified starch. Determination of hydroxypropyl content. Method using proton nuclear magnetic resonance (NMR) spectrometry |
| BS EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| BS EN 14984:2016 | Liming materials. Determination of product effect on soil pH. Soil incubation method |
| BS EN ISO 13366-1:2008 | Milk. Enumeration of somatic cells Microscopic method (Reference method) |
| BS EN ISO 21571 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION |
| ISO 11543:2000 | Modified starch Determination of hydroxypropyl content Method using proton nuclear magnetic resonance (NMR) spectrometry |
| BS EN 14936-2:2006 | Copper and copper alloys. Determination of aluminium content FAAS method |
| ISO 8069:2005 | Dried milk — Determination of content of lactic acid and lactates |
| ISO 8968-2:2001 | Milk Determination of nitrogen content Part 2: Block-digestion method (Macro method) |
| ISO 12228-2:2014 | Determination of individual and total sterols contents Gas chromatographic method Part 2: Olive oils and olive pomace oils |
| BS EN ISO 665:2000 | Oilseeds. Determination of moisture and volatile matter content |
| ISO 658:2002 | Oilseeds — Determination of content of impurities |
| ISO 12625-6:2016 | Tissue paper and tissue products Part 6: Determination of grammage |
| BS EN ISO 9614-2:1997 | Acoustics. Determination of sound power levels of noise sources using sound intensity Measurement by scanning |
| BS EN ISO 9614-3:2009 | Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning |
| ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| BS EN 12286:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
| BS EN 1607:2013 | Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces |
| BS EN ISO 6869:2001 | Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| BS EN 13925-2:2003 | Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials Procedures |
| BS EN 13130-6:2004 | Materials and articles in contact with foodstuffs. Plastics substances subject to limitation Determination of vinylidene chloride in plastics |
| BS EN ISO 15310:2005 | Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
| BS EN 14935:2006 | Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method |
| BS EN ISO 6975:2005 | Natural gas. Extended analysis. Gas chromatographic method |
| BS EN ISO 8069:2007 | Dried milk. Determination of content of lactic acid and lactates |
| ISO 14637:2004 | Milk Determination of urea content Enzymatic method using difference in pH (Reference method) |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| BS EN ISO 24276 : 2006 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| BS EN ISO 659:2009 | Oilseeds. Determination of oil content (Reference method) |
| BS EN 12441-8:2004 | Zinc and zinc alloys. Chemical analysis Detection of tin in secondary zinc. Flame atomic absorption spectrometric method |
| BS EN 12441-11:2006 | Zinc and zinc alloys. Chemical analysis Determination of silicon in zinc alloys. Spectrophotometric method |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| BS EN 14936-1:2006 | Copper and copper alloys. Determination of aluminium content Titrimetric method |
| ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| ISO 12625-15:2015 | Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| ISO 3656:2011 | Animal and vegetable fats and oils Determination of ultraviolet absorbance expressed as specific UV extinction |
| ISO 3035:2011 | Corrugated fibreboard — Determination of flat crush resistance |
| ISO 6867:2000 | Animal feeding stuffs Determination of vitamin E content Method using high-performance liquid chromatography |
| BS EN ISO 22174:2005 | Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. General requirements and definitions |
| ISO 16931:2009 | Animal and vegetable fats and oils Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC) |
| ISO 11702:2016 | Animal and vegetable fats and oils Enzymatic determination of total sterols content |
| CEN/TS 15439:2006 | Biomass gasification - Tar and particles in product gases - Sampling and analysis |
| CEN/TR 16059:2010 | Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins |
| CEN/TR 15522-2:2012 | Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses |
| EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| DIN EN ISO 16035:2005-11 | Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils (ISO 16035:2003) |
| CEN/TS 15916-1:2011 | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| DIN EN 15111:2007-06 | Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry) |
| CEN/TS 16375:2013 | Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method |
| EN 15360:2007 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
| DIN EN 15055:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method |
| CEN/TS 15023-3:2006 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS) |
| EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
| EN 12441-7:2004 | Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction |
| DIN EN ISO 659:2009-11 | Oilseeds - Determination of oil content (Reference method) (ISO 659:2009) |
| EN 15476:2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda |
| CEN/TS 16319:2012 | Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| DIN EN 14524:2004-10 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
| EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| DIN EN 12441-1:2004-10 | ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 1: DETERMINATION OF ALUMINIUM IN ZINC ALLOYS - TITRIMETRIC METHOD |
| DIN 10759-2:1998-05 | ANALYSIS OF HONEY - DETERMINATION OF SACCHARASE ACTIVITY - PART 2: HADORN METHOD |
| EN 15478:2009 | Fertilizers - Determination of total nitrogen in urea |
| DIN EN 13925-1:2003-07 | NON-DESTRUCTIVE TESTING - X-RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 15839:2007-02 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003) |
| DIN EN 443:2008-06 | Helmets for fire fighting in buildings and other structures |
| DIN EN ISO 4934:2004-05 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN 61391-1:2006/A1:2017 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 1: TECHNIQUES FOR CALIBRATING SPATIAL MEASUREMENT SYSTEMS AND MEASUREMENT OF SYSTEM POINT-SPREAD FUNCTION RESPONSE (IEC 61391-1:2006/A1:2017) |
| DIN EN ISO 8069:2007-09 | Dried milk - Determination of content of lactic acid and lactates (ISO 8069:2005) |
| EN 12441-11:2006 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| DIN EN ISO 6321:2002-07 | Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002) |
| DIN EN ISO 6320:2017-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| EN 15616:2012 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 16319:2013+A1:2015 | Fertilizers and liming materials - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution |
| CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
| EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
| DIN EN ISO 658:2002-08 | OILSEEDS - DETERMINATION OF CONTENT OF IMPURITIES |
| DIN ISO 6673:2007-03 | GREEN COFFEE - DETERMINATION OF LOSS IN MASS AT 105 DEGREES C |
| DIN EN 15587:2014-02 | CEREALS AND CEREAL PRODUCTS - DETERMINATION OF BESATZ IN WHEAT (TRITICUM AESTIVUM L.), DURUM WHEAT (TRITICUM DURUM DESF.), RYE (SECALE CEREALE L.) AND FEED BARLEY (HORDEUM VULGARE L.) |
| CEN/TS 14938-2:2006 | Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method |
| DIN EN 15621:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010) |
| DIN EN ISO 2759:2003-11 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| CEN/TS 15750:2008 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| EN 13130-5:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 5: Determination of vinylidene chloride in food simulants |
| CEN/TS 15478:2006 | Fertilizers - Determination of total nitrogen in urea |
| CEN/TS 15477:2006 | Fertilizers - Determination of the water-soluble potassium content |
| EN 15025:2010 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| EN ISO 13366-1:2008/AC:2009 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| DIN EN ISO 1735:2005-05 | Cheese and processed cheese products - Determination of fat content - Gravimetric method (Reference method) (ISO 1735:2004) |
| CEN/TS 15476:2006 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda |
| EN 13130-8:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics |
| EN ISO 12625-3:2014 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| EN 16318:2013+A1:2016 | Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
| DIN 10751-2:1999-09 | ANALYSIS OF HONEY - DETERMINATION OF HYDROXYMETHYLFURFURAL - WHITE DIRECT PHOTOMETRIC METHOD |
| CEN/TS 15475:2006 | Fertilizers - Determination of ammoniacal nitrogen |
| CEN/TS 16817-1:2015 | Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler |
| DIN ISO 11047:2003-05 | SOIL QUALITY - DETERMINATION OF CADMIUM, CHROMIUM, COBALT, COPPER, LEAD, MANGANESE, NICKEL AND ZINC IN AQUA REGIA EXTRACTS OF SOIL - FLAME AND ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRIC METHODS |
| DIN EN 10184:2006-05 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| CEN ISO/TS 21268-3:2009 | Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007) |
| EN 15477:2009 | Fertilizers - Determination of the water-soluble potassium content |
| DIN EN ISO 13884:2005-11 | Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003) |
| EN 13526:2001 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 16320:2013+A1:2017 | Fertilizers and liming materials - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
| DIN EN ISO 15195:2004-01 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| DIN EN 14935:2006-09 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| DIN EN 10318:2005-08 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005 |
| DIN EN ISO 1518-1:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011) |
| DIN EN ISO 8968-5:2002-06 | MILK - DETERMINATION OF NITROGEN CONTENT - PART 5: DETERMINATION OF PROTEIN-NITROGEN CONTENT |
| DIN EN 375:2001-06 | INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE |
| DIN EN 13925-2:2003-07 | NON-DESTRUCTIVE TESTING - X-RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS - PART 2: PROCEDURES |
| DIN EN 16320:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 5534:2004-09 | Cheese and processed cheese - Determination of the total solids content (Reference method) (ISO 5534:2004) |
| DIN EN 12441-2:2005-02 | ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 2: DETERMINATION OF MAGNESIUM IN ZINC ALLOYS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN ISO 9832:2003-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF RESIDUAL TECHNICAL HEXANE CONTENT |
| DIN EN 13925-3:2005-07 | NON-DESTRUCTIVE TESTING - X RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS - PART 3: INSTRUMENTS |
| DIN EN 14627:2005-07 | Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
| EN 15111:2007 | Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry) |
| EN 15605:2010 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN EN ISO 15310:2005-10 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| DIN EN ISO 5983-2:2009-10 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 2: BLOCK DIGESTION AND STEAM DISTILLATION METHOD |
| EN 15305:2008/AC:2009 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| EN 61620:1999 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| DIN EN 15550:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| EN 13130-2:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 2: Determination of terephthalic acid in food simulants |
| EN ISO 29841:2014/A1:2016 | VEGETABLE FATS AND OILS - DETERMINATION OF THE DEGRADATION PRODUCTS OF CHLOROPHYLLS A AND A' (PHEOPHYTINS A, A' AND PYROPHEOPHYTINS) (ISO 29841:2009) |
| DIN EN ISO 8968-1:2002-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| CEN ISO/TS 17764-2:2006 | Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gas chromatographic method (ISO/TS 17764-2:2002) |
| DIN EN ISO 21415-2:2016-03 | WHEAT AND WHEAT FLOUR - GLUTEN CONTENT - PART 2: DETERMINATION OF WET GLUTEN AND GLUTEN INDEX BY MECHANICAL MEANS (ISO 21415-2:2015) |
| DIN EN ISO 14501:2008-01 | Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography (ISO 14501:2007) |
| I.S. EN ISO 17294-1:2006 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| BS 1741-3(2001) : 2001 | MILK - DETERMINATION OF FAT CONTENT - GRAVIMETRIC METHOD (REFERENCE METHOD) |
| UNE-EN 13823:2012 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| UNE-EN 16318:2015 | Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) |
| BS 4289-3(2000) : 2000 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| UNE-EN 16320:2015 | Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| AS 5339:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment |
| AS 5337:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
| AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
| AS 1301.403:2019 | Methods of test for pulp and paper Bursting strength of paper (ISO 2758:2014, MOD) |
| AS 5006.2:2019 | Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method |
| AS 5333.1:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room |
| SA/SNZ TS 61724.2:2020 | Photovoltaic system performance Capacity evaluation method (IEC TS 61724-2:2016, MOD) |
| SA/SNZ TS 61724.3:2020 | Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD) |
| AS 1301.438:2019 | Methods of test for pulp and paper Bursting strength of board (ISO 2759:2014, MOD) |
| AS 1301.420:2019 | Methods of test for pulp and paper Gurley air permeance of paper (ISO 5636-5:2013, MOD) |
| AS 3515.2:2019 | Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method |
| AS 5333.2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| AS 4564-2003 (AG 864) | Specification for general purpose natural gas |
| AS 5332:2019 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
| AS ISO 1211:2021 | Milk - Determination of fat content - Gravimetric method (Reference method) |
£58.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.