DIN EN 13370:2003-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-]
Hardcopy , PDF
01-02-2012
English
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pre-treatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) - Validation of EN 13370
A.1 - General
A.2 - Interlaboratory study
A.3 - Selection of Laboratories
A.4 - Selection of samples
A.5 - Validation scope
A.6 - Results and statistics
A.7 - Conclusion
Bibliography
Describes methods for the determination of the parameters Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN[-], F[-] in aqueous eluates for the characterization of waste.
DevelopmentNote |
Supersedes DIN V ENV 13370 (10/2003)
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNI EN 13370 : 2004 | Identical |
NS EN 13370 : 1ED 2003 | Identical |
EN 13370:2003 | Identical |
I.S. EN 13370:2003 | Identical |
NF EN 13370 : 2004 | Identical |
SN EN 13370 : 2003 | Identical |
BS EN 13370:2003 | Identical |
NEN EN 13370 : 2003 | Identical |
NBN EN 13370 : 2003 | Identical |
UNE-EN 13370:2004 | Identical |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
EN ISO 14403 : 2002 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS |
EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
EN 27888 : 1993 | WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
DIN 38405-13:1981-02 | GERMAN STANDARD METHODS FOR THE ANALYSIS OF WATER, WASTE WATER AND SLUDGE; ANIONS (GROUP D); DETERMINATION OF CYANIDES (D 13) |
EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
EN 1484 : 1997 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
ENV ISO 13530:1998 | WATER QUALITY - GUIDE TO ANALYTICAL QUALITY CONTROL FOR WATER ANALYSIS |
DIN 38409-16:1984-06 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; GENERAL MEASURES OF EFFECTS AND SUBSTANCES (GROUP H); DETERMINATION OF THE PHENOL INDEX (H 16) |
EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
DIN ISO 5725-4:2003-01 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
EN ISO 14402 : 1999 | WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA) |
EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
EN 1485 : 1996 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.