• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1993-1-5:2006/A1:2017

Current
Current

The latest, up-to-date edition.

EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS
Published date

26-04-2017

1 Introduction
   1.1 Scope
   1.2 Normative references
   1.3 Terms and definitions
   1.4 Symbols
2 Basis of design and modelling
   2.1 General
   2.2 Effective width models for global analysis
   2.3 Plate buckling effects on uniform members
   2.4 Reduced stress method
   2.5 Non uniform members
   2.6 Members with corrugated webs
3 Shear lag in member design
   3.1 General
   3.2 Effectives width for elastic shear lag
   3.3 Shear lag at the ultimate limit state
4 Plate buckling effects due to direct stresses at the ultimate
   limit state
   4.1 General
   4.2 Resistance to direct stresses
   4.3 Effective cross section
   4.4 Plate elements without longitudinal stiffeners
   4.5 Stiffened plate elements with longitudinal stiffeners
   4.6 Verification
5 Resistance to shear
   5.1 Basis
   5.2 Design resistance
   5.3 Contribution from the web
   5.4 Contribution from flanges
   5.5 Verification
6 Resistance to transverse forces
   6.1 Basis
   6.2 Design resistance
   6.3 Length of stiff bearing
   6.4 Reduction factor CHI[F] for effective length for resistance
   6.5 Effective loaded length
   6.6 Verification
7 Interaction
   7.1 Interaction between shear force, bending moment and axial
       force
   7.2 Interaction between transverse force, bending moment and
       axial force
8 Flange induced buckling
9 Stiffeners and detailing
   9.1 General
   9.2 Direct stresses
   9.3 Shear
   9.4 Transverse loads
10 Reduced stress method
Annex A (informative) Calculation of critical stresses for
                      stiffened plates
Annex B (informative) Non uniform members
Annex C (informative) Finite Element Methods of Analysis (FEM)
Annex D (informative) Plate girders with corrugated webs
Annex E (normative) Alternative methods for determining effective
                      cross sections

Provides design requirements of stiffened and unstiffened plates which are subject to inplane forces.

Committee
CEN/TC 250
DevelopmentNote
Supersedes ENV 1993-1-5. (12/2006)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 1993-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
UNE-EN 1993-1-7:2013 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
UNE-EN 1994-1-1:2013 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
EN 1993-1-6:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
DIN EN 1994-1-1:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
BS EN 1993-1-7:2007 Eurocode 3. Design of steel structures Plated structures subject to out of plane loading
BS EN 1993-1-4 : 2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
DIN EN 1993-6:2010-12 Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1998-4:2007-01 Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
I.S. EN 1994-1-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
I.S. EN 1998-6:2005 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
UNE-EN 1994-2:2013 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
I.S. EN 1993-1-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
I.S. EN 1993-1-4:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1993-1-6:2010-12 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
I.S. EN 1994-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1994-1-1:2005 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 1993-1-7:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 1993-1-7 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1993-1-7:2010-12 Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading (includes Corrigendum AC:2009)
DIN EN 1993-1-4:2015-10 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1994-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
BS EN 1998-6:2005 Eurocode 8. Design of structures for earthquake resistance Towers, masts and chimneys
BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-5:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 1994-2 : 2006 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
UNI EN 1994-1-2 : 2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
UNI EN 1994-1-1 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 1998-4:2006 EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 4: SILOS, TANKS AND PIPELINES
BS EN 1993-1-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 1993-6:2007 Eurocode 3. Design of steel structures Crane supporting structures
BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
BS EN 1994-1-2 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings
BS EN 1998-4:2006 Eurocode 8. Design of structures for earthquake resistance Silos, tanks and pipelines
EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
EN 1993-1-7:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 1993-1-3:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX)
PREN 12716 : DRAFT 2017 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNE-EN 1993-1-4:2012 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
UNE-EN 1993-1-6:2013 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
UNE-EN 1994-1-2:2016 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
17/30354260 DC : 0 BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
DIN EN 1994-1-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
DIN EN 1998-6:2006-03 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)

EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.