• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 61000-6-1:2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
Superseded date

02-02-2022

Published date

12-01-2007

FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms and definitions
4 Performance criteria
5 Conditions during testing
6 Product documentation
7 Applicability
8 Immunity test requirements
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Annex ZZ (informative) Coverage of Essential Requirements of
         EC Directives
Bibliography

Applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be directly connected to a low-voltage public mains network or connected to a dedicated DC source which is intended to interface between the apparatus and the low-voltage public mains network. This standard applies also to apparatus which is battery operated or is powered by a non-public, but non-industrial, low-voltage power distribution system if this apparatus is intended to be used in the locations described below. The environments encompassed by this standard are residential, commercial and light-industrial locations, both indoor and outdoor. The following list, although not comprehensive, gives an indication of locations which are included: - residential properties, for example houses, apartments; - retail outlets, for example shops, supermarkets; - business premises, for example offices, banks; - areas of public entertainment, for example cinemas, public bars, dance halls; - outdoor locations, for example petrol stations, car parks, amusement and sports centres; - light-industrial locations, for example workshops, laboratories, service centres. Locations which are characterised by being supplied directly at low voltage from the public mains network are considered to be residential, commercial or light-industrial. The immunity requirements have been selected to ensure an adequate level of immunity for apparatus at residential, commercial and light-industrial locations. The levels do not, however, cover extreme cases, which may occur at any location, but with an extremely low probability of occurrenc

Committee
CLC/TC 210
DevelopmentNote
Supersedes EN 50082-1 (11/2001)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy
Supersedes

I.S. EN 50090-2-2:1998 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
DIN EN 15500 E : 2008 CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
11/30253123 DC : 0 BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
PREN 12016 : DRAFT 2018 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
BS EN 16657 : 2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
BS EN 15500:2008 Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment
BS EN 50090-5-2:2004 Home and building electronic systems (HBES) Media and media dependent layers - Network based on HBES Class 1, Twisted Pair
NF EN 50491-5-2 : 2011 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
CEI EN 60942 : 2004 ELECTROACOUSTICS SOUND CALIBRATORS
I.S. EN 50065-2-2:2003 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS EN 50412-2-1:2005 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements
BS EN 61400-1 : 2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
BS EN 61260:1996 Electroacoustics. Octave-band and fractional-octave-band filters
I.S. EN 50270:2015 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
I.S. EN 61000-6-5:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
UNE-EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
BS EN 50090-2-3:2005 Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
I.S. EN 50486:2008 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
09/30192323 DC : 0 BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
BS EN 50270:2015 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 61260-1:2014 Electroacoustics. Octave-band and fractional-octave-band filters Specifications
BS EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
PREN 15194 : DRAFT 2015 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
TS 101 999 : 1.1.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; PHY PROTOCOL SPECIFICATION
17/30358367 DC : 0 BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 15091:2013 Sanitary tapware. Electronic opening and closing sanitary tapware
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 45501:2015 Metrological aspects of non-automatic weighing instruments
BS EN 13160-1:2003 Leak detection systems General principles
BS EN 50174-2 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 15433-6:2007 Transportation loads. Measurement and evaluation of dynamic mechanical loads Automatic recording systems for measuring randomly occurring shock during monitoring of transports
BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
DIN EN 15091:2014-03 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
UNE-EN 50083-2:2013 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
EN 60728-4:2008 Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
CLC/TR 50538 : 2010 Guide to EMC Directive conformity of equipment designed for military purposes
EN 61000-6-5:2015/AC:2018-01 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017)
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN 61260-1:2014 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements
EN 50412-2-1 : 2005 COR 2009 POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests
EN 61851-1:2011 Electric vehicle conductive charging system - Part 1: General requirements
EN 62676-1-1:2014/AC:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013)
EN 50133-1 : 1996 AMD 1 2002 ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
EN 50083-2:2012/A1:2015 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
EN 13616:2004/AC:2006 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 13160-1:2016 Leak detection systems - Part 1: General Principles
DIN EN 15500:2008-12 CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
16/30334724 DC : 0 BS EN 15433-6 - TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS
NF EN 301489-1 : 2012 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DD CLC/TS 50136-4:2004 Alarm systems. Alarm transmission systems and equipment Annunciation equipment used in alarm receiving centres
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
13/30274904 DC : 0 BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
BS EN 60942:2003 Electroacoustics. Sound calibrators
CEI EN 61547 : 2010 EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
14/30301251 DC : 0 BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 61000-6-4:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
13/30260741 DC : 0 BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
TS 102 639-2 : 1.1.1 ACCESS AND TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); THIRD GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 2: PHYSICAL LAYER
EN 303 446-1 : 1.1.0 DRAFT ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 1: REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
03/102517 DC : 0 BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
BS EN 50491-5-2:2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment
CLC/TS 50136-4:2004 Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres
15/30331519 DC : 0 BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
PD CLC/TR 50083-2-1:2014 Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility measurements
BS EN 15467:2014 Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements
BS EN 62676-1-1:2014 Video surveillance systems for use in security applications System requirements. General
I.S. EN 60942:2003 ELECTROACOUSTICS - SOUND CALIBRATORS
CEI EN 50438 : 2014 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
CEI EN 50486 : 2009 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
I.S. EN 16314:2013 GAS METERS - ADDITIONAL FUNCTIONALITIES
TR 103 088 : 1.3.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); USING THE ETSI EN 301 489 SERIES OF EMC STANDARDS
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
DIN EN 15500-1:2016-01 (Draft) ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
EN 50174-2 : 2009 AMD 2 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
I.S. EN 50174-2:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
PREN 15433-6 : DRAFT 2016 TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS
BS EN 15194:2017 Cycles. Electrically power assisted cycles. EPAC Bicycles
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. EN 12453:2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 61547:2009 EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
I.S. EN 61131-2:2007 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
S.R. CLC/TS 50549-2:2015 REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 2: CONNECTION TO A MV DISTRIBUTION NETWORK
DIN EN 15467:2015-03 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 1434-4:2016 Heat meters - Part 4: Pattern approval tests
I.S. EN 50090-5-2:2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
I.S. TS 50136-4:2004 ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTRES
EN 1434-4:2015 Heat meters - Part 4: Pattern approval tests
S.R. CLC/TR 50083-2-1:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS
DIN EN 12042:2014-07 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1434-4:2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
UNI EN 12042 : 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
PREN 50465 : DRAFT 2011 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
I.S. EN 15500:2008 CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
I.S. EN 60146-1-1:2010 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
EN 12453 : 2017 COR 2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
EN 14236:2007 Ultrasonic domestic gas meters
EN 61260:1995/A1:2001 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
I.S. ETSI EN 301489-1 V1.8.1:2009 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 12041:2015-02 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12016:2013-12 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
DIN EN 12110:2014-10 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
DIN EN 12043:2015-02 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
EN 50090-5-2:2004 Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 61131-2:2007 Programmable controllers Equipment requirements and tests
BS EN 12043:2014 Food processing machinery. Intermediate provers. Safety and hygiene requirements
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 14351-1:2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS
I.S. EN 415-6:2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 14143:2013 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 1434-4:2019-08 Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018)
I.S. EN 12016:2013 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
I.S. EN 12043:2014 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 13616:2004-09 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN 453:2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 61400-1:2005/A1:2010 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 12355:2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13160-1:2016 LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 15433-6:2016 TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC-MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS
I.S. EN 12041:2014 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15091:2013 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 12110:2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
I.S. EN 13204:2016 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 453 : 2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
VDI 6014:2016-12 Energy conservation by application of variable speed drives (VSD) in building services
NF EN 12355 : 2003 + A1 2010 FOOD PROCESSING MACHINERY - DERIDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
VDI/VDE 2184:2008-06 Reliable operation and maintenance of field bus systems
VDI 3551:2011-01 Electromagnetic compatibility (EMC) in building services
UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
CEI EN 61260-2 : 2017 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50438:2013 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
CEI CLC/TR 50373 : 2005 WIND TURBINES - ELECTROMAGNETIC COMPATIBILITY
CEI EN 50083-2 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
09/30192320 DC : DRAFT MAY 2009 BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
13/30277474 DC : 0 BS EN 16657 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
DIN EN 15467 E : 2015 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50486:2008 Equipment for use in audio and video door-entry systems
UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
15/30321305 DC : 0 BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
11/30246864 DC : 0 BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS
05/30129947 DC : 0 EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
PREN 13204 : DRAFT 2015 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
09/30181706 DC : 0 BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50438:2013 Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
05/30129943 DC : 0 EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
07/30152812 DC : DRAFT AUG 2007 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
PD CLC/TR 50538:2010 Guide to EMC Directive conformity of equipment designed for military purposes
04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNE-EN 62676-1-1:2015 Video surveillance systems for use in security applications - Part 1-1: System requirements - General
BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
I.S. EN 50491-4-1:2012 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
ONORM EN 14236 : 2008 ULTRASONIC DOMESTIC GAS METERS
I.S. EN 62820-1-1:2016 BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 50065-2-1:2003 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS
BS EN 61000-6-4 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
I.S. EN 15467:2014 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
S.R. CLC/TS 50549-1:2015 REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 1: CONNECTION TO A LV DISTRIBUTION NETWORK ABOVE 16 A
UNE-EN 15091:2014 Sanitary tapware - Electronic opening and closing sanitary tapware
I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
CEI EN 50090-9-1 : 2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
PREN 13160-1 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
EN 12042 : 2014 COR 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
CLC/TR 50083-2-1:2014 Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements
PREN 12978 : DRAFT 2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
CEI EN 50491-5-2 : 2011 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
TR 102 937 : 1.1.1 ECALL COMMUNICATIONS EQUIPMENT; CONFORMANCE TO EU VEHICLE REGULATIONS, R&TTE, EMC & LV DIRECTIVES, AND EU REGULATIONS FOR ECALL IMPLEMENTATION
EN 15500-1:2017 Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
I.S. EN 61851-1:2011 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
I.S. EN 50090-9-1:2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
I.S. EN 15194:2017 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
I.S. EN 50133-1:1997 ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1 : SYSTEM REQUIREMENTS
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 12355:2011-02 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 14143:2013-10 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
BS EN 12355 : 2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 45501:2016 Metrological aspects of non-automatic weighing instruments
UNE-EN 13204:2017 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNE-EN 50160:2011 Voltage characteristics of electricity supplied by public electricity networks
EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
EN 300 386 : 1.6.1 TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU
UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
EN 301 843-1 : 2.1.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR MARINE RADIO EQUIPMENT AND SERVICES; HARMONISED STANDARD FOR ELECTROMAGNETIC COMPATIBILITY; PART 1: COMMON TECHNICAL REQUIREMENTS
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 14143 : 2013 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN 415-6 : 2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12016 : 2013 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 12043 : 2015 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15091 : 2014 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13616 : 2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 12041 : 2015 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
UNI EN 12110 : 2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 12355 : 2010 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 50090-9-1:2004 Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair
BS EN 1434-4 : 2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
BS EN 16314:2013 Gas meters. Additional functionalities
03/102518 DC : 0 BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
10/30214970 DC : 0 BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
I.S. EN 13616:2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
CEI EN 60728-4 : 2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
IEEE 1909.1-2014 IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements
08/30180966 DC : DRAFT APR 2008 BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS
I.S. EN 61400-1:2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
UNE-EN 15433-6:2016 Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
BS EN 415-10:2014 Safety of packaging machines General Requirements
18/30368636 DC : 0 BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
12/30260007 DC : 0 BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
11/30247615 DC : 0 BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES
BS EN 61260-2 : 2016 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
I.S. EN 61260-1:2014 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN 12405-2:2012 Gas meters. Conversion devices Energy conversion
BS EN 50090-9-1:2004 Home and building electronic systems (HBES) Installation requirements - Generic cabling for HBES class 1 twisted pair
PD CLC/TR 50373:2004 Wind turbines. Electromagnetic compatibility
BS EN 60728-4:2008 Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks
I.S. EN 50090-2-3:2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
02/645215 DC : DRAFT OCT 2002 EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
04/30126825 DC : DRAFT DEC 2004 EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
DIN EN 1434-4:2016-02 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
BS EN 50133-1:1997 Alarm systems. Access control systems for use in security applications System requirements
CLC/TS 50549-2:2015 Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network
TS 102 123 : 1.2.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RADIO CONFORMANCE TEST SPECIFICATION
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
DIN EN 12453:2005-05 (Draft) INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
CLC/TR 50373:2004 Wind turbines - Electromagnetic compatibility
SCTE 135-1 : 2013 DOCSIS 3.0 - PART 1: PHYSICAL LAYER SPECIFICATION
PREN 15091 : DRAFT 2012 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
PREN 45501 : DRAFT 2011 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
I.S. EN 50160:2010 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
I.S. EN 15500-1:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
S.R. CEN ISO/TS 14907-1:2015 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
DIN EN 14236 E : 2008 ULTRASONIC DOMESTIC GAS METERS
17/30362673 DC : 0 BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
CEI EN 50090-5-2 : 2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
CEI EN 60146-1-1 : 2013 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 50412-2-1:2009 POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50083-2:2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
IEC TR 62869:2013 Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment
EN 61260-2:2016/A1:2017 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017)
DIN EN 15091 E : 2014 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
DIN EN 45501:2016-03 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
BS EN 453:2014 Food processing machinery. Dough mixers. Safety and hygiene requirements
UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 50090-2-2 : 1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
BS EN 61851-1:2011 Electric vehicle conductive charging system General requirements
BS EN 14236:2007 Ultrasonic domestic gas meters
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 61000-6-5:2016 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
BS EN 13204 : 2004 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNE-EN 415-6:2014 Safety of packaging machines - Part 6: Pallet wrapping machines
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
ISO/TS 14907-1:2015 Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures
BS EN 12041:2014 Food processing machinery. Moulders. Safety and hygiene requirements
UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
BS EN 12016:2013 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity
BS EN 14351-1 : 2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS
BS EN 14143:2013 Respiratory equipment. Self-contained re-breathing diving apparatus
PD IEC/TR 62869:2013 Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment
UNE-EN 13160-1:2017 Leak detection systems - Part 1: General Principles
UNE-EN 14143:2014 Respiratory equipment - Self-contained re-breathing diving apparatus
EN 15467:2014 Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements
EN 15500:2008 Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 15433-6:2016 Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
EN 14143:2013 Respiratory equipment - Self-contained re-breathing diving apparatus
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 15091:2013 Sanitary tapware - Electronic opening and closing sanitary tapware
EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN 16314:2013 Gas meters - Additional functionalities
EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles
EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines
PREN 50539-11 : DRAFT 2010 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS EN 61000-4-2:2009 Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test
05/30129951 DC : 0 EN 15164 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
12/30270909 DC : 0 BS EN 50438 - REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS
BS EN 50083-2 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
06/30127082 DC : 0 EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS
TR 103 400 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS
PD CEN/TR 15500-2:2016 Energy Performance of Buildings. Control for heating, ventilating and air-conditioning applications Accompanying TR prEN 15500-1:2015. Modules M3-5,M4-5,M5-5
CEI EN 61260-1 : 2017 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
I.S. EN 50065-2-3:2003 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS
UNE-EN 16314:2014 Gas meters - Additional functionalities
EN IEC 60942:2018 Electroacoustics - Sound calibrators
CSA ISO/IEC 14762 : 2010 INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS EN 15500-1:2017 Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5
I.S. EN 12042:2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
CEI EN 62820-1-1 : 1ED 2017 BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
BS EN 50065-2-1:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments
11/30249911 DC : 0 BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
BS EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
10/30213584 DC : 0 BS EN 14143 - RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
11/30235383 DC : 0 BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
BS EN 61000-6-5:2015 Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment
DIN EN 12405-2:2012-10 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
DIN EN 16314:2013-09 GAS METERS - ADDITIONAL FUNCTIONALITIES
UNI EN 15500 : 2008 CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
10/30218152 DC : 0 BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements
UNE-EN 12405-2:2013 Gas meters - Conversion devices - Part 2: Energy conversion
BS EN 60146-1-1:2010 Semiconductor converters. General requirements and line commutated converters Specification of basic requirements
CLC/TS 50549-1:2015 Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A
CEI EN 50412-2-1 : 2006 POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
UNI EN 16314 : 2013 GAS METERS - ADDITIONAL FUNCTIONALITIES
DIN EN 15500-1 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
I.S. EN 62676-1-1:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 61260-2:2016 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
I.S. EN 50491-5-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS, FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
I.S. EN IEC 60942:2018 ELECTROACOUSTICS - SOUND CALIBRATORS
S.R. CLC/TR 50538:2010
I.S. EN 61000-4-2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
TR 102 271 : 1.1.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RECOMMENDATIONS ON ESSENTIAL RADIO PARAMETERS TO BE INCLUDED IN EN 302 326
I.S. EN 12405-2:2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
SCTE 220-1 : 2016 DOCSIS 3.1 - PART 1: PHYSICAL LAYER SPECIFICATION
CEI EN 50491-4-1 : 2014 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
CEI EN 62676-1-1 : 2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
PREN 50270 : DRAFT 2013 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 50160 : 2010 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
I.S. EN 60728-4:2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
UNE-EN 50491-4-1:2013 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
CEI CLC/TS 50136-4 : 2004 ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTRES
PREN 50438 : DRAFT 2012 REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS
EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
BS EN 809:1998+A1:2009 Pumps and pump units for liquids. Common safety requirements
DIN EN 415-6:2013-09 Safety of packaging machines - Part 6: Pallet wrapping machines
DIN EN 453:2015-04 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 415-6:2013 Safety of packaging machines Pallet wrapping machines
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
EN 50065-2-1 : 2003 AMD 1 2005 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS
EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006 SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
DIN EN 12110:2003-05 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
EN 50065-2-3 : 2003 AMD 1 2005 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS
EN 50090-2-2:1996/A2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
EN 60146-1-1:2010 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 12110:2014 Tunnelling machines - Air locks - Safety requirements
EN 50491-5-2:2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment
EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
EN 50486:2008 Equipment for use in audio and video door-entry systems
EN 50438:2013 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
CEN ISO/TS 14907-1:2015 Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
CEN/TR 15500-2:2016 Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5
EN 50090-2-3:2005 Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES
HD 60364-4-442:2012 Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
UNE-EN 809:1999 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS

IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
EN 61000-4-1:2007 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
EN 55022:2010/AC:2011 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
119999/5/EC : 1999 DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.