EN 61138:2007

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for the construction of cables
  4.1 Conductors
      4.1.1 Material
      4.1.2 Construction
      4.1.3 Check of construction
      4.1.4 Electrical resistance
  4.2 Separator between conductor and insulation
  4.3 Insulation
      4.3.1 Material
      4.3.2 Colour of insulation
      4.3.3 Application to the conductor
      4.3.4 Thickness
      4.3.5 Mechanical properties before and after ageing
  4.4 Marking
      4.4.1 Indication of origin
      4.4.2 Indication of code designation and cross-sectional
            area of the conductor
      4.4.3 Continuity of marks
      4.4.4 Durability
      4.4.5 Legibility
5 Tests on completed cables
  5.1 Electrical properties
      5.1.1 General
      5.1.2 Voltage test
      5.1.3 Spark test
  5.2 Overall diameter
  5.3 Flexibility test
      5.3.1 General
      5.3.2 Test for cables with copper conductors
      5.3.3 Test for cables with aluminium conductors
  5.4 Optional clashing test
6 Particular specifications
  6.1 General
  6.2 Code designation
  6.3 Rated voltage
  6.4 Construction
      6.4.1 Conductors
      6.4.2 Insulation
      6.4.3 Overall diameter
  6.5 Tests
7 Guide to the use of the cables
Annex A (normative) - Clashing test
Annex ZA (normative) - Normative references to international
                       publications with their corresponding
                       European publications

Applies to flexible cables with insulation based on ethylene propylene rubber (EPR), polyvinyl chloride (PVC) or silicone rubber (SiR) for portable earthing and short-circuiting equipment. For this type of cable no rated voltage is given as such cables are exclusively intended for earthing and short-circuiting equipment. The particular types of cable and their code designations are specified in Clause 6 of this standard. The test methods specified in this standard are given in IEC 60227-2, IEC 60245-2, IEC 60811 and IEC 62230. The significant technical changes with respect to the previous edition are as follows: - extension of the scope to cover silicone rubber as an insulation material; - introduction of a new normative annex for clashing test.