• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 62305-3:2011

Current
Current

The latest, up-to-date edition.

Protection against lightning - Part 3: Physical damage to structures and life hazard
Published date

04-03-2011

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Lightning protection system (LPS)
5 External lightning protection system
6 Internal lightning protection system
7 Maintenance and inspection of an LPS
8 Protection measures against injury to living beings due to
  touch and step voltages
Annex A (normative) - Positioning the air-termination system
Annex B (normative) - Minimum cross-section of the entering
        cable screen in order to avoid dangerous sparking
Annex C (informative) - Evaluation of the separation
        distance s
Annex D (informative) - Additional information for LPS in the
        case of structures with a risk of explosion
Annex E (informative) - Guidelines for the design, construction,
        maintenance and inspection of lightning protection
        systems
Bibliography

IEC 62305-3:2010(E) provides the requirements for protection of a structure against physical damage by means of a lightning protection system (LPS), and for protection against injury to living beings due to touch and step voltages in the vicinity of an LPS (see IEC 62305-1). This second edition cancels and replaces the first edition, published in 2006, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 1) Minimum thicknesses of metal sheets or metal pipes given in Table 3 for air-termination systems are assumed as not able to prevent hot-spot problems. 2) Steel with electro-deposited copper is introduced as material suitable for LPS. 3) Some cross-sectional areas of LPS conductors were slightly modified. 4) For bonding purposes, isolating spark gaps are used for metal installations and SPD for internal systems. 5) Two methods - simplified and detailed - are provided for evaluation of separation distance. 6) Protection measures against injuries of living beings due to electric shock are considered also inside the structure. 7) Improved information for LPS in the case of structures with a risk of explosion are given in Annex D (normative).

DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

CEI EN 62561-4 : 2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
UNE-EN 61400-24:2011 Wind turbines - Part 24: Lightning protection
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
PREN 1127-1 : DRAFT 2017 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 62561-4:2017 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
08/30152055 DC : DRAFT APR 2008 BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
BS EN 61400-1 : 2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
BS EN 61822:2009 Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
CEI EN 62305-1 : 2013 PROTECTION AGAINST LIGHTNING - PART 1: GENERAL PRINCIPLES
BS EN 50164-1:2008 Lightning protection components (LPC) Requirements for connection components
BS EN 50164-5:2009 Lightning protection components (LPC) Requirements for earth electrode inspection housings and earth electrode seals
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
CEI CLC/TS 50544 : 2011 LOW VOLTAGE D.C. SURGE PROTECTIVE DEVICE FOR TRACTION SYSTEMS - SELECTION AND APPLICATION RULES FOR SURGE ARRESTERS
BS EN 60728-11:2017 Cable networks for television signals, sound signals and interactive services Safety
S.R. CLC/TS 50539-22:2010 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 22: SELECTION AND APPLICATION PRINCIPLES - WIND TURBINE APPLICATIONS
I.S. EN 50132-7:2012 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 7: APPLICATION GUIDELINES
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 50164-6:2009 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS
17/30365866 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 62561-5:2017 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 50174-2 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
DIN EN 1127-2:2002-07 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
EN 50164-4:2008 Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners
EN 62305-4:2011/AC:2016 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010)
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
CLC/TS 50544:2010 Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters
EN 62253 : 2011 PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS
EN 61822:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
DIN EN 12976-1:2017-04 Thermal solar systems and components - Factory made systems - Part 1: General requirements
EN 50132-7:2012 Alarm systems - CCTV surveillance systems for use in security applications - Part 7: Application guidelines
EN 50164-1:2008 Lightning Protection Components (LPC) - Part 1: Requirements for connection components
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN 62561-5:2017 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
I.S. EN 50164-5:2009 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
11/30202599 DC : 0 BS EN 50132-7 - ALARM SYSTEM - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 7: APPLICATION GUIDELINES
14/30312146 DC : 0 BS EN 1090-5 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED ALUMINIUM ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 61400-3:2009 Wind turbines Design requirements for offshore wind turbines
17/30361394 DC : 0 BS EN 50174-1 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
PREN 13243 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
BS EN 50164-3 : 2006 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS
BS EN 50164-7:2008 Lightning protection components (LPC) Requirements for earthing enhancing compounds
EN 62676-4:2015 Video surveillance systems for use in security applications - Part 4: Application guidelines
07/30166781 DC : 0 BS EN 50164-2 AMD 2 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
BS EN 62561-4:2017 Lightning protection system components (LPSC) Requirements for conductor fasteners
EN 50341-2-19:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012)
PD CLC/TR 50450:2006 Resistibility requirements for equipment having (a) telecommunication port(s)
I.S. EN 60728-11:2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
CEI EN 62561-2 : 2013 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
08/30180781 DC : DRAFT APR 2008 BS EN 50164-6 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS
DIN EN 12977-5:2016-08 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
S.R. CLC/TS 50544:2010 LOW VOLTAGE D.C. SURGE PROTECTIVE DEVICE FOR TRACTION SYSTEMS - SELECTION AND APPLICATION RULES FOR SURGE ARRESTERS
EN 50174-2 : 2009 AMD 2 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
CLC/TS 50539-22:2010 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 22: Selection and application principles - Wind turbine applications
I.S. EN 50174-2:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
I.S. CLC/TR 50450:2006 RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S)
I.S. EN 50164-3:2006 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS
UNE-EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
I.S. EN 50164-2:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
S.R. HD 60364-7-712:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS
BS EN 50174-1 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
CEI EN 62305-4 : 2013 PROTECTION CONTRE LA FOUDRE - PARTIE 4: RESEAUX DE PUISSANCE ET DE COMMUNICATION DANS LES STRUCTURES
EN 50310:2016 Telecommunications bonding networks for buildings and other structures
UNE-EN 12186:2015 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
UNE-EN 50310:2016 Telecommunications bonding networks for buildings and other structures
BS EN 62253:2011 Photovoltaic pumping systems. Design qualification and performance measurements
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 1127-2:2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 61400-1:2005/A1:2010 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 12976-1:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 12186:2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
VDI 2166 Blatt 2:2015-10 Planning of electrical installations in buildings - Advice for electric mobility
VDI 3564 Blatt 1:2017-05 Fire protection - Recommendations for high-bay warehouses
VDI 2263 Blatt 6:2017-08 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations
VDI 6002 Blatt 1:2014-03 Solar heating for potable water - Basic principles - System technology and application in residential buildings
VDI 2262 Blatt 1:2013-06 Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection
08/30180770 DC : DRAFT APR 2008 BS EN 50164-3 AMD 1 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS
I.S. EN 50341-2-23:2016 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-23: NATIONAL NORMATIVE ASPECTS (NNA) FOR SLOVAKIA (BASED ON EN 50341-1:2012)
BS EN 50132-7:2012 Alarm systems. CCTV surveillance systems for use in security applications Application guidelines
DD CLC/TS 50544:2010 Low voltage d.c. surge protective device for traction systems. Selection and application rules for surge arresters
EN 60728-11:2017 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
11/30247849 DC : 0 BS EN 12977-5 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 50164-4:2008 Lightning protection components (LPC) Requirements for conductor fasteners
BS EN 62305-1:2011 Protection against lightning General principles
CEI EN 61400-3 : 2009 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
BS EN 62305-4:2011 Protection against lightning Electrical and electronic systems within structures
07/30152812 DC : DRAFT AUG 2007 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
UNE-EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
I.S. EN 62561-2:2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES (IEC 62561-2:2012 (MOD))
I.S. EN 50174-1:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
I.S. CLC TS 61643-22:2006 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - SELECTION AND APPLICATION PRINCIPLES
CEI EN 50341-2-23 : 1ED 2017 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-23: NATIONAL NORMATIVE ASPECTS (NNA) FOR SLOVAKIA (BASED ON EN 50341-1:2012)
I.S. EN 62305-2:2012 PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010 (MOD))
I.S. EN 50164-4:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
EN 62561-4:2017 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
I.S. EN 62305-4:2011 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES
UNI EN 12977-5 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
EN IEC 62561-2:2018 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
I.S. EN 50164-1:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 1: REQUIREMENTS FOR CONNECTION COMPONENTS
BS EN 12976-2:2017 Thermal solar systems and components. Factory made systems Test methods
CLC/TR 50450:2006 Resistibility requirements for equipment having (a) telecommunication port(s)
I.S. EN 50310:2016 TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
I.S. EN 12977-5:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
S.R. CLC/TS 61643-12:2009 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
I.S. EN 12976-2:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 2: TEST METHODS
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNE-EN 60728-11:2012 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
DIN EN 1127-2:2014-09 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 12186:2014-12 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
DIN EN 12976-1:2014-07 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 60079-14:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
DD CLC/TS 61643-12:2009 Low-voltage surge protective devices Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
UNE-EN 62305-4:2011 Protection against lightning -- Part 4: Electrical and electronic systems within structures
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 12976-1:2017 Thermal solar systems and components - Factory made systems - Part 1: General requirements
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 12186 : 2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
EN 50164-3 : 2006 AMD 1 2009 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS
UNI EN 1127-2 : 2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
BS EN 50341-2-19:2015 Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012)
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
EN 50341-2-23:2016 Overhead electrical lines exceeding AC 1 kV – Part 2-23: National Normative Aspects (NNA) for SLOVAKIA (based on EN 50341-1:2012)
BS EN 62676-4:2015 Video surveillance systems for use in security applications Application guidelines
CEI EN 61400-24 : 2011 WIND TURBINES - PART 24: LIGHTNING PROTECTION
CLC/TS 50539-12:2013 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 12: Selection and application principles - SPDs connected to photovoltaic installations
BS EN 50164-2:2008 Lightning protection components (LPC) Requirements for conductors and earth electrodes
BS EN 50164-6:2009 Lightning protection components (LPC) Requirements for lightning strike counters
I.S. EN 61400-1:2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
13/30277110 DC : 0 BS EN 13243 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
DD CLC/TS 50539-12:2010 Low-voltage surge protective devices. Surge protective devices for specific application including d.c. Selection and application principles. SPDs connected to photovoltaic installations
CEI EN 62305-2 : 2013 PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
05/30134962 DC : DRAFT JUN 2005 CENELEC TS 61643-22 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - SELECTION AND APPLICATION PRINCIPLES
CEI CLC/TS 50539-12 : 2011 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 12: SELECTION AND APPLICATION PRINCIPLES - SPDS CONNECTED TO PHOTOVOLTAIC INSTALLATIONS
I.S. EN IEC 62561-2:2018 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
EN 12976-2:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 2: TEST METHODS
DD CLC/TS 61643-22:2006 Low-voltage surge protective devices Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PREN 50174-1 : DRAFT 2017 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
I.S. EN 61400-24:2010 WIND TURBINES - PART 24: LIGHTNING PROTECTION
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
S.R. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 12977-5:2012 Thermal solar systems and components. Custom built systems Performance test methods for control equipment
EN 12977-5:2018 Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment
I.S. HD 60364-4-444:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
I.S. EN 61822:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 50174-1:2009/A2:2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
BS EN 12976-1:2017 Thermal solar systems and components. Factory made systems General requirements
BS EN 12186:2014 Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements
UNE-CLC/TS 61643-12:2012 Low-voltage surge protective devices -- Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
UNE-EN 62253:2012 Photovoltaic pumping systems - Design qualification and performance measurements
17/30361391 DC : 0 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 1127-2:2014 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
BS EN 50310:2016 Telecommunications bonding networks for buildings and other structures
EI MODEL CODE SAFE PRACTICE PT1 : 2010 THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS
EI 1540 : 2014 DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES
PD CLC/TS 50539-12:2013 Low-voltage surge protective devices. Surge protective devices for specific application including d.c. Selection and application principles. SPDs connected to photovoltaic installations
I.S. EN 50341-2-19:2015 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-19: NATIONAL NORMATIVE ASPECTS (NNA) FOR CZECH REPUBLIC (BASED ON EN 50341-1:2012)
UNE-EN 50132-7:2013 Alarm systems - CCTV surveillance systems for use in security applications - Part 7: Application guidelines
BS EN 62561-2:2012 Lightning Protection System Components (LPSC) Requirements for conductors and earth electrodes
CEI CLC/TR 50450 : 2006 RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S)
CEI EN 62561-5 : 2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
DD CLC/TS 50539-22:2010 Low-voltage surge protective devices. Surge protective devices for specific application including d.c. Selection and application principles. Wind turbine applications
S.R. CLC/TS 50539-12:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 12: SELECTION AND APPLICATION PRINCIPLES - SPDS CONNECTED TO PHOTOVOLTAIC INSTALLATIONS
BS EN 50341-2-23:2016 Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for SLOVAKIA (based on EN 50341-1:2012)
BS EN 62305-2:2012 Protection against lightning Risk management
UNE-EN 62561-4:2011 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
BS EN 62561-5:2017 Lightning protection system components (LPSC) Requirements for earth electrode inspection housings and earth electrode seals
I.S. EN 60079-14:2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
CEI EN 50132-7 : 2014 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 7: APPLICATION GUIDELINES
08/30184703 DC : DRAFT JUNE 2008 BS EN 50164-5 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
BS EN 61400-24:2010 Wind turbines Lightning protection
CEI EN 60728-11 : 2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
CEI CLC/TS 50539-22 : 2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 22: SELECTION AND APPLICATION PRINCIPLES - WIND TURBINE APPLICATIONS
I.S. EN 62253:2011 PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS
I.S. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
I.S. EN 62305-1:2011 PROTECTION AGAINST LIGHTNING - PART 1: GENERAL PRINCIPLES
I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 50164-7:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 7: REQUIREMENTS FOR EARTHING ENHANCING COMPOUNDS
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
I.S. EN 61400-3:2009 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
09/30205182 DC : 0 BS EN 50310 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
EN 62305-4:2011/AC:2016-11 Protection against lightning - Part 4: Electrical and electronic systems within structures
EN 62305-2:2012 Protection against lightning - Part 2: Risk management
EN 50164-2:2008 Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes
DIN EN 12977-5:2012-06 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
HD 60364-7-712:2016 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 50164-5:2009 Lightning Protection Components (LPC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
HD 60364-4-444:2010/AC:2012 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
EN 61400-24:2010 Wind turbines - Part 24: Lightning protection
EN 50164-7:2008 Lightning Protection Components (LPC) - Part 7: Requirements for earthing enhancing compounds
CLC/TS 61643-12 : 2009 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
EN 50164-6:2009 Lightning Protection Components (LPC) - Part 6: Requirements for lightning strike counters
HD 60364-4-442:2012 Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system

EN 50164-2:2008 Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes
IEC 60728-11:2016 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
EN 62305-4:2011/AC:2016 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010)
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
EN 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
EN 50164-7:2008 Lightning Protection Components (LPC) - Part 7: Requirements for earthing enhancing compounds
IEC 61400-24:2010 Wind turbines - Part 24: Lightning protection
EN 50164-6:2009 Lightning Protection Components (LPC) - Part 6: Requirements for lightning strike counters
EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC 61643-21:2000+AMD1:2008+AMD2:2012 CSV Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC 62561-1:2017 Lightning protection system components (LPSC) - Part 1: Requirements for connection components
EN 50164-5:2009 Lightning Protection Components (LPC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
IEC 62561-3:2017 Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
EN 62305-4:2011/AC:2016-11 Protection against lightning - Part 4: Electrical and electronic systems within structures
IEC 62305-1:2010 Protection against lightning - Part 1: General principles
IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
EN 62561-3:2017 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
EN 50164-3 : 2006 AMD 1 2009 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS
EN 61643-21:2001/A2:2013 LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS (IEC 61643-21:2000/A2:2012)
EN 62305-2:2012 Protection against lightning - Part 2: Risk management
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 50164-1:2008 Lightning Protection Components (LPC) - Part 1: Requirements for connection components
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 62561-1:2017 Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
IEC 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
IEC 62305-2:2010 Protection against lightning - Part 2: Risk management
EN 50164-4:2008 Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.