IEEE/ANSI C63.4-2014
Current
The latest, up-to-date edition.
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
Hardcopy , PDF
English
20-06-2014
1 Overview
2 Normative references
3 Definitions, acronyms, and abbreviations
4 Measurement instrumentation
5 Test facilities
6 General requirements for EUT arrangements,
configuration, and operation
7 AC power-line conducted emission measurements
8 Radiated emission measurements
9 Radio-noise power
10 Test reports
11 Measurement of ITE
12 Measurement of unintentional radiators other
than ITE
13 Limit relaxation for transients
Annex A (informative) - Applicable clauses and
subclauses of ANSI C63.4 by equipment type
Annex B (normative) - Specifications and verification
of LISN characteristics
Annex C (normative) - Absorbing clamp
Annex D (normative) - Validation of radiated emission
test sites (30 MHz to 1 GHz)
Annex E (informative) - Method of exploratory radiated
emission maximization
Annex F (normative) - Test procedure for emissions
testing in TEM waveguides (30 MHz to 1 GHz)
Annex G (informative) - Sample OATS to TEM waveguide
validation spreadsheet
Annex H (informative) - Precautions in using spectrum
analyzers
Annex I (informative) - Application of ANSI C63.4 to
United States and Canadian requirements
Annex J (informative) - Guidance on the construction
of nonconductive EUT support tables
Annex K (informative) - (Reserved for future use)
Annex L (informative) - (Reserved for future use)
Annex M (informative) - (Reserved for future use)
Annex N (normative) - Test site-specific hybrid antenna
qualification procedures, limitations and
acceptance criteria
Annex O (informative) - Bibliography
Annex P (informative) - Keyword index
Describes consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.
| DevelopmentNote |
Amendment 1 to ANSI C63.4 is available separately, see ANSI C63.4A. (10/2017)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-8917-8
|
| Pages |
232
|
| ProductNote |
New child AMD 1 2017 is now added
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| IEEE/ANSI C63.15-2018 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| IEEE 187-2018 | IEEE Standard for Measurement of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz |
| CEI EN 60601-1-2:2018 | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| CSA C22.2 NO. 60601-1-2:16 (R2021) | Medical electrical equipment — Part 1-2: General requirements for basic safety and essential performance — Collateral Standard: Electromagnetic disturbances — Requirements and tests (IEC 60601-1-2:2014, fourth edition, 2014-02, with Canadian deviations) | Appareils électromédicaux — Partie 1-2 : Exigences générales pour la sécurité de base et les performances essentielles — Norme collatérale : Perturbations électromagnétiques — Exigences et essais (norme IEC 60601-1-2:2014 adoptée, quatrième édition, 2014-02, avec exigences propres au Canada) |
| IEEE/ANSI/USEMCSC C63.29-2022 | American National Standard for Methods of Measurement of Radio-Frequency Emissions from Lighting Devices |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
| IEEE/ANSI N42.38-2015 | American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security |
| IEEE/ANSI C63.30-2021 | American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment |
| IEEE/ANSI C63.5-2017 | American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
| ANSI NEMA C12.1:2026 | American National Standard for Electric Meters— Code for Electricity Metering |
| ANSI NEMA C12.1:2024 | American National Standard for Electric Meters—Code for Electricity Metering |
| CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| CISPR 16-1-3:2004+AMD1:2016 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power |
| CISPR 16-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| IEEE 187-2003 | IEEE Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9kHz to 40GHz |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| SAE ARP1972A | Recommended Measurement Practices and Procedures for EMC Testing |
| CISPR 32:2015 RLV | Electromagnetic compatibility of multimedia equipment - Emission requirements |
| IEEE/ANSI C63.6-1996 | American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ANSI/NCSL Z540 1 : 94(R2002) | CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| IEEE/ANSI C63.12-2015 | American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| IEEE/ANSI C63.22-2004 | American National Standard Guide for Automated Electromagnetic Interference Measurements |
| IEEE 139-1988 | IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User\'s Premises |
| EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.