ISO 16000-4:2011
Current
The latest, up-to-date edition.
Indoor air — Part 4: Determination of formaldehyde — Diffusive sampling method
Hardcopy , PDF
French, English
01-12-2011
ISO 16000-4:2011 specifies a determination of formaldehyde in indoor air using a diffusive sampler with solvent desorption and high performance liquid chromatography (HPLC).
The test method is applicable to the measurement of formaldehyde in indoor air over the range from 0,001 mg/m3 to 1,0 mg/m3 for a sampling period of between 24 h and 72 h. For sampling periods of 24 h, the applicable concentration range is 0,003 mg/m3 to 1 mg/m3, and for 72 h it is 0,001 mg/m3 to 0,33 mg/m3.
The method is suitable for measurements in atmospheres with conventional indoor air relative humidity and for monitoring at air velocities as low as 0,02 m/s. The chromatographic step in the method is designed to eliminate potential interferences, including those due to the presence of other carbonyl compounds. The sampling method gives a time-weighted average result.
| Committee |
ISO/TC 146/SC 6
|
| DevelopmentNote |
Supersedes ISO/DIS 16000-4. (12/2011)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 16000-4:2012 | Identical |
| NEN ISO 16000-4 : 2011 | Identical |
| DIN ISO 16000-4:2012-11 | Identical |
| BS ISO 16000-4:2011 | Identical |
| NF ISO 16000-4 : 2012 | Identical |
| GOST R ISO 16000-4 : 2007 | Identical |
| UNE-ISO 16000-4:2019 | Identical |
| GOST ISO 16000-4 : 2016 | Identical |
| UNE-ISO 16000-4:2006 | Identical |
| ISO 21844:2018 | Cellular plastic — Cellulose foam thermal insulation — Material specification |
| DIN EN ISO 16000-2:2006-06 | Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004) |
| VDI 4300 Blatt 9:2005-08 | Measurement of indoor air pollution - Measurement strategy for carbon dioxide (CO) |
| 09/30195924 DC : 0 | BS ISO 16000-3 - INDOOR AIR - PART 3: DETERMINATION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS - ACTIVE SAMPLING METHOD |
| 15/30317868 DC : 0 | BS EN 16846-1 - PHOTOCATALYSIS - BATCH MODE TEST METHODS - PART 1: MEASUREMENT OF EFFICIENCY OF PHOTOCATALYTIC DEVICES USED FOR THE ELIMINATION OF VOC AND ODOUR IN INDOOR AIR IN ACTIVE MODE |
| BS ISO 21844:2018 | Cellular plastic. Cellulose foam thermal insulation. Material specification |
| BS ISO 16000-2 : 2004 AMD 16405 | INDOOR AIR - PART 2: SAMPLING STRATEGY FOR FORMALDEHYDE |
| BS EN ISO 16000-2:2006 | Indoor air Sampling strategy for formaldehyde |
| ISO 16000-2:2004 | Indoor air — Part 2: Sampling strategy for formaldehyde |
| BS EN ISO 16000-5:2007 | Indoor air Sampling strategy for volatile organic compounds (VOCs) |
| EN ISO 16000-2:2006 | Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004) |
| EN ISO 16000-5:2007 | Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) (ISO 16000-5:2007) |
| 17/30350989 DC : 0 | BS ISO 21844 - CELLULAR PLASTIC - CELLULOSE FOAM THERMAL INSULATION - MATERIAL SPECIFICATION |
| I.S. EN ISO 16000-5:2007 | INDOOR AIR - PART 5: SAMPLING STRATEGY FOR VOLATILE ORGANIC COMPOUNDS (VOCS) |
| ISO 16000-5:2007 | Indoor air — Part 5: Sampling strategy for volatile organic compounds (VOCs) |
| DIN EN ISO 16000-5:2007-05 | Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) (ISO 16000-5:2007) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| ISO 12219-4:2013 | Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method |
| ISO 16017-2:2003 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 2: Diffusive sampling |
| EN 13528-2:2002 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| ISO 16000-2:2004 | Indoor air — Part 2: Sampling strategy for formaldehyde |
| ISO 12219-5:2014 | Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.