• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 2719:2016

Current

Current

The latest, up-to-date edition.

Determination of flash point — Pensky-Martens closed cup method

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

16-06-2016

ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.

CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard.

NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2].

Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C.

Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.

Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13].

ISO 2719:2016 is not applicable to water-borne paints and varnishes.

NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

Committee
ISO/TC 28
DevelopmentNote
Supersedes ISO/DIS 2719. (06/2016) NEW CHILD AMD 1 2021 IS NOW ADDED
DocumentType
Standard
Pages
22
ProductNote
NEW CHILD AMD 1 2021 IS NOW ADDED
PublisherName
International Organization for Standardization
Status
Current
Supersedes

BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
14/30301257 DC : 0 BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
04/101637 DC : DRAFT JAN 2004 ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
17/30359196 DC : DRAFT SEP 2017 BS EN 16709 AMD 1 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
14/30294041 DC : 0 BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS
BS ISO/TS 12928:1999 Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications
PD CEN/TR 16389:2017 Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination
BIS IS 546 : 2014 MUSTARD OIL - SPECIFICATION
ISO 9950:1995 Industrial quenching oils — Determination of cooling characteristics — Nickel-alloy probe test method
09/30213528 DC : 0 BS EN 60296 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OIL FOR TRANSFORMERS AND SWITCHGEAR
09/30205523 DC : 0 BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
BS EN 60695-1-40:2014 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
I.S. EN 15322:2013 BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
CEI EN 60076-14 : 2014 POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS
S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
BS ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems. Specification
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BIS IS 544 : 2014 GROUNDNUT OIL - SPECIFICATION
UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
13/30279896 DC : 0 BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
11/30249539 DC : 0 BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
BS EN ISO 10416:2009 Petroleum and natural gas industries. Drilling fluids. Laboratory testing
02/207269 DC : 0 IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
BS EN 45545-1:2013 Railway applications. Fire protection on railway vehicles General
CEI EN 60695-9-1 : 2014 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE
S.R. CLC/TR 50503:2010 GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
BS EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
05/30128501 DC : DRAFT JAN 2005 IEC 60079-6 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION 'O'
08/30181966 DC : DRAFT MAY 2008 BS ISO 13739 - PETROLEUM PRODUCTS - PROCEDURES FOR THE TRANSFER OF BUNKER FUEL TO SHIPS
12/30263868 DC : 0 BS EN 60076-14 - POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS
12/30268820 DC : 0 BS EN 60836 - SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES
CEI EN 61099 : 2011 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
PD CEN/TR 17103:2017 Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination
00/106660 DC : DRAFT OCT 2000 PREN 13924 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
UNE-EN 45545-1:2013 Railway applications - Fire protection on railway vehicles - Part 1: General
BIS IS 4277 : 2014 SUNFLOWER OIL - SPECIFICATION
UNE-EN 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
PREN 1825-1 : DRAFT 1995 INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
I.S. EN 60076-14:2013 POWER TRANSFORMERS - PART 14: LIQUIDIMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS (IEC 60076-14:2013 (EQV))
ISO 15167:1999 Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method
BS ISO 8178-5:2008 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
UNI CEI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
ISO 13739:2010 Petroleum products Procedures for transfer of bunkers to vessels
IEC 60296 REDLINE : 4.0 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS EN 16709 : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
ASTM D 8175 : 2018 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
DIN EN 13341:2011-04 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
DIN EN 14998 E : 2005 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: FLUXING OILS - SPECIFICATIONS AND TEST METHODS
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN 14264:2003 Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Impregnating pitch. Characteristics and test methods
BS EN 14733 : 2005 BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL
BS EN 13991:2003 Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
IEC 60695-1-40:2013 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
EN 60867:1994 Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
CEN/TR 15138:2005 Petroleum products and other liquids - Guide to flash point testing
EN 62701:2014 Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears
DIN EN 982:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
CEN/TS 45545-7:2009 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
EN 13160-3:2016 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
DIN EN 14998:2005-04 Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
OVE EN IEC 60296:2023 01 01 Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment
BS MA 100:1989 Specification for petroleum fuels for marine oil engines and boilers
DEFSTAN 68-251/3(2007) : 2007 FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61
BS EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines Machines using combustible solvents
CEI UNI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
05/30098184 DC : DRAFT MAY 2005 ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
DIN EN 15940 E : 2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
PD CEN/TR 16557:2013 Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination
CEN/TR 15160:2005 Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests
S.R. CEN/TR 16389:2017 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
BS EN 61099:2010 Insulating liquids. Specifications for unused synthetic organic esters for electrical purposes
I.S. EN 60422:2013 MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
UNI EN ISO 8230-3 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
BS EN 60695-9-1:2013 Fire hazard testing Surface spread of flame. General guidance
I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
14/30304007 DC : 0 BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK
BS ISO/TR 13739:1998 Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
12/30261072 DC : 0 BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS
DIN EN 14214 E : 2003 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
12/30257150 DC : 0 BS EN 62770 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS LIQUIDS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN 60076-14:2013 Power transformers Liquid-immersed power transformers using high-temperature insulation materials
I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
BS ISO/TS 12927:1999 Lubricants, industrial oils and related products (class L). Family M (metalworking). Guidelines for establishing specifications
BS EN 60465:1992 Specification for unused insulating mineral oils for cables with oil ducts
DIN EN 45545-1:2013-08 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
16/30294369 DC : 0 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
BS EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
UNE-EN 14188-4:2010 Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants
03/100561 DC : DRAFT JULY 2003 IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
17/30361296 DC : DRAFT SEP 2017 BS EN 16734 AMD 1 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
BIS IS 16081 : 2013 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
UNE-EN 60076-14:2014 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
ISO 4113:2010 Road vehicles Calibration fluids for diesel injection equipment
BS EN 13924-1:2015 Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens
BS 684-1.17:1998 Methods of analysis of fats and fatty oils. Physical methods Flashpoint limit test using Pensky-Martens closed-cup flash tester
03/309751 DC : DRAFT JUNE 2003 IEC 60695-9-1 - FIRE HAZARD TESTING - PART 9: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE
BS 7952:2001 Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
ISO 8178-6:2000 Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
09/30202310 DC : 0 BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
ISO/TR 29662:2009 Petroleum products and other liquids Guidance for flash point testing
UNI EN 13924-2 : 2014 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
UNE 206015:2018 Heat transfer fluids for solar thermal power plants with parabolic trough collector technology. Requirements and tests
DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
ISO/TS 11366:2011 Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
I.S. EN 14188-4:2009 JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS
DIN ISO 8217:2013-12 PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS (ISO 8217:2012)
EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
S.R. CWA 16379:2011 FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS
DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
I.S. EN 61039:2008 CLASSIFICATION OF INSULATING LIQUIDS
VDE 0370-12 : 1994 SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
BS EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
EN ISO 2592:2017 Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
IEC TS 60695-1-20:2008 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
IEC TS 60076-14:2009 Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials
DIN EN 14214:2014-06 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 14156:2003 Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
I.S. EN 14023:2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
I.S. EN 13160-3:2016 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
I.S. EN 12591:2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
I.S. EN 13341:2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
DIN EN 12591:2009-08 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
DIN EN 60867 : 1995 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS
OVE/ONORM EN 60296 : 2013 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012)
VDE 0372-1 : 1995 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS
BS 3863:1992 Guide for gas turbines procurement
VDI 3397 Blatt 2:2014-06 Maintenance of metalworking fluids for metalcutting and forming operations - Measures for maintaining quality, process improvement, and for reducing solid and liquid waste
BIS IS 3448 : 2014 RICE BRAN OIL - SPECIFICATION
CEI EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
DIN EN 15322 E : 2013 BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
PD CEN/TR 15367-3:2009 Petroleum products. Guide for good housekeeping Prevention of cross contamination
BS 6802:1987 Specification for unused insulating liquids based on synthetic aromatic hydrocarbons
BS ISO 4113:2010 Road vehicles. Calibration fluids for diesel injection equipment
17/30336222 DC : 0 BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK
BS IEC 62899-202:2016 Printed electronics Materials. Conductive ink
S.R. CEN/TR 17103:2017 FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
BS ISO 4020:2001 Road vehicles. Fuel filters for diesel engines.Test methods
BS ISO 8178-6:2000 Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test
DIN EN 13924-2:2014-07 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
14/30287765 DC : 0 BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS EN 62770:2014 Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment
06/30159746 DC : 0 BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
BS EN 61039:2008 Classification of insulating liquids
08/30195180 DC : DRAFT DEC 2008 BS EN 61099 - SPECIFICATION FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
BS ISO 8217:2017 Petroleum products. Fuels (class F). Specifications of marine fuels
BS EN 60296:2012 Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
17/30352956 DC : 0 BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
DD CEN/TS 45545-7:2009 Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations
14/30298209 DC : 0 BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
BS EN 14188-4:2009 Joint fillers and sealants Specifications for primers to be used with joint sealants
10/30216699 DC : 0 BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
BS ISO 10416 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
95/101288 DC : DRAFT FEB 1995 PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
BS EN 15322:2013 Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30269145 DC : 0 BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
DIN EN 13924-1 E : 2016 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
PD ISO/TR 11018:2001 Essential oils. General guidance on the determination of flashpoint
10/30215366 DC : 0 BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
BS EN 50015:1998 Electrical apparatus for potentially explosive atmospheres. Oil immersion \'o\'
PREN 590 : DRAFT 2011 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
CSA E60079.6 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
14/30310326 DC : 0 BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
API RP 13I : 2009 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
IEC 62899-202:2016 Printed electronics - Part 202: Materials - Conductive ink
I.S. CEN/TR 15160:2005 PETROLEUM AND RELATED PRODUCTS - APPLICABILITY OF DIESEL FUEL TEST METHODS FOR FATTY ACID METHYL ESTERS (FAME) - INFORMATION AND RESULTS ON ROUND ROBIN TESTS
I.S. EN 60836:2015 SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES
UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
I.S. EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI CEN/TR 15367-3 : 2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
PREN 15322 : DRAFT 2011 BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
I.S. EN 60695-1-40:2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 16709 E : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
CEI 89-29 : 2010 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
I.S. EN 62701:2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS
UNI EN 14188-4 : 2009 JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS
DIN EN 60465 : 1994 SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
ISO/TS 12927:1999 Lubricants, industrial oils and related products (class L) — Family M (Metalworking) — Guidelines for establishing specifications
NF EN 61099 : 2011 INSULATING LIQUIDS - SPECIFICATION FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
ISO 15267:1998 Animal and vegetable fats and oils Flashpoint limit test using Pensky-Martens closed cup flash tester
ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
UNI EN 14214 : 2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems Specification
CEI EN 60296 : 2013 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
IEC 62770:2013 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
IEC 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 14214:2012+A1:2014/AC:2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
EN 14156:2003 Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods
EN 14998:2005 Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods
EN 14260:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : road tars - Characteristics and test methods
EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 14188-4:2009 Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants
UNI EN 13341 : 2011 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
UNI EN 14733 : 2010 BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL
UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
UNI EN 14023 : 2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
UNI EN 982 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNI EN 12591 : 2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
UNE-EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
UNI EN 15322 : 2013 BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
I.S. CEN TR 15367-3:2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
DIN EN 14188-4:2009-10 Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants
11/30235371 DC : 0 BS EN 62701 - FLUIDS FOR ELECTRO TECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS
BS EN 13924-2:2014 Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens
BS 4689:1980 Method for determination of flash and fire points of petroleum products: Cleveland open cup method
PD CEN/TR 15160:2005 Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
BS ISO 8068:2006 Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
API 3000 : 2014 CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS
ISO 4020:2001 Road vehicles — Fuel filters for diesel engines — Test methods
UNE-EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
BS ISO 13739:2010 Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM
CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
API 13I : 2009 : R2016 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
ISO/TR 13739:1998 Petroleum products Methods for specifying practical procedures for the transfer of bunker fuels to ships
API 13I REDLINE : 2009 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
16/30325304 DC : 0 BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
BS ISO 18436-5:2012 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst
I.S. EN ISO 10416:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
PREN 14214 : DRAFT 2009 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
BS EN 60867:1994 Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons
13/30267448 DC : 0 BS EN 60079-6 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
BIS IS 4276 : 2014 SOYBEAN OIL - SPECIFICATION
BS EN 60079-6:2007 Explosive atmospheres Equipment protected by oil immersion \'o\'
DIN EN ISO 8230-3:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
04/30117724 DC : DRAFT AUG 2004 EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS
NF EN 50015 : 1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O'
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNI EN ISO 10416 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
BS 2000-36(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
18/30369065 DC : DRAFT FEB 2018 BS EN 14214 AMD 2 - LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 2592:2017 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017)
I.S. EN 62770:2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
DEFSTAN 91-43/2(1993) : 1993 LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330
I.S. CEN/TR 15138:2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING
ISO 18095:2018 Condition monitoring and diagnostics of power transformers
I.S. EN 60695-1-20:2016 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
FM 6020 : 2016 COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS)
UNE-EN 14214:2013 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
ISO/TR 11018:1997 Essential oils General guidance on the determination of flashpoint
ISO 7628:2010 Road vehicles Thermoplastics tubing for air braking systems
DIN EN 16900:2015-09 (Draft) FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
S.R. CEN/TS 45545-7:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
ISO 18436-5:2012 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
DIN EN 14023:2013-04 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
IEC 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
BS EN 14023:2010 Bitumen and bituminous binders. Specification framework for polymer modified bitumens
ISO 8230-3:2008 Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents
IEC 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
UNE-EN 60079-6:2016 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
BS EN 14155:2003 Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
BS EN 982 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNE-EN 13160-3:2017 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
ISO 10416:2008 Petroleum and natural gas industries — Drilling fluids — Laboratory testing
UNE-EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
IEC 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
UNE-EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
08/30187364 DC : DRAFT JULY 2008 BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES
IEC 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
BS EN 13341 : 2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
IEC 60867:1993 Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
UNE-EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
IEC 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
EN ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
EN 13924:2006/AC:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : impregnating pitch - Characteristics and test methods
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 14733:2005+A1:2010 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
EN 13924-1:2015 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
EN 14155:2003 Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods
EN 13991:2003 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: CREOSOTES - SPECIFICATIONS AND TEST METHODS
EN 15322:2013 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
EN 13924-2:2014 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
EN ISO 10416:2009 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008)
EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
I.S. EN 45545-1:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
DD IEC TS 60076-14 : DRAFT 2009 POWER TRANSFORMERS - PART 14: DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS
ISO 19378:2003 Lubricants, industrial oils and related products (class L) Machine-tool lubricants Categories and specifications
DD IEC TS 60695-1-20 : DRAFT MAR 2008 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
11/30250572 DC : 0 BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
PD CEN/TR 15138:2005 Petroleum products and other liquids. Guide to flash point testing
I.S. EN 16900:2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
DIN EN 15322:2013-07 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
I.S. EN 13924:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNE-EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
03/100225 DC : DRAFT FEB 2003 IEC 60836 ED.2 - SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES
PREN 13160-3 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
BS ISO 7628:2010 Road vehicles. Thermoplastics tubing for air braking systems
SAE J 1696 : 2017 STANDARD FUEL FILTER TEST FLUID
BS EN 60422:2013 Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
I.S. EN 13924-2:2014 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
11/30247867 DC : 0 BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS
DIN EN 13924-1:2016-02 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
UNI CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
CSA E60079.6 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
15/30325842 DC : 0 BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
CEI EN 61039 : 2009 CLASSIFICATION OF INSULATING LIQUIDS
01/124221 DC : DRAFT NOV 2001 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
NF EN ISO 10416 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
08/30171587 DC : DRAFT MAY 2008 BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS
BS ISO 4261:2013 Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
09/30206973 DC : 0 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
00/244591 DC : DRAFT OCT 2000 SPECIFICATION FOR UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
13/30255316 DC : 0 BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
CEI EN 60079-6 : 2016 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
03/110060 DC : 0 BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
BS ISO 19378:2003 Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
08/30178041 DC : DRAFT FEB 2008 BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT
S.R. CEN/TR 16557:2013 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
CLC/TR 50503 : 2010 Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
CEI EN 60695-1-40 : 2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
PREN 12591 : DRAFT 2016 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
I.S. EN 60867:1996 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS
ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
I.S. EN ISO 8230-3:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
UNE-EN 61099:2011 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
I.S. EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV))
I.S. EN 60296:2012 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012 (EQV))
UNI ISO 18436-5 : 2013 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST
I.S. EN 60079-6:2015 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
I.S. EN 13924-1:2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
ISA 12.26.01 : 1998 ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 1 HAZARDOUS (CLASSIFIED) LOCATIONS: TYPE OF PROTECTION - OIL IMMERSION "O"
DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
UNE-EN 15322:2014 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
I.S. EN 61099:2010 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
EN 45545-1 : 2013 COR 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
BS EN 14260:2003 Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods
DD ISO/TS 11366:2011 Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
BS EN ISO 1516:2002 Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
BS EN 13160-3:2003 Leak detection systems Liquid systems for tanks
BS EN 13924:2006 Bitumen and bituminous binders. Specifications for hard paving grade bitumens
IEC 61039:2008 Classification of insulating liquids
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens
EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
CEN/TR 17103:2017 Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination
DIN EN 14214:2003-11 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
CEN/TR 16389:2017 Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
EN 61039 : 2008 CLASSIFICATION OF INSULATING LIQUIDS
CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
DIN EN 14733:2010-12 BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL
DIN EN 13924:2006-07 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
EN 50015:1998 Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
EN 60695-1-20 : 2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013)

ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
ISO/TR 29662:2009 Petroleum products and other liquids Guidance for flash point testing
ISO 3170:2004 Petroleum liquids — Manual sampling
CEN/TR 15138:2005 Petroleum products and other liquids - Guide to flash point testing
ISO Guide 33:2015 Reference materials — Good practice in using reference materials
ISO Guide 35:2017 Reference materials — Guidance for characterization and assessment of homogeneity and stability
ASTM E 2251 : 2014 : REDLINE Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
IEC 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 13736:2013 Determination of flash point Abel closed-cup method
ISO Guide 34:2009 General requirements for the competence of reference material producers
ASTM E 1137 : 1997 Standard Specification for Industrial Platinum Resistance Thermometers

View more information
£119.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.