ISO 4302:2016
Current
Current
The latest, up-to-date edition.
Cranes — Wind load assessment
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
19-09-2016
£126.00
Excluding VAT
ISO 4302:2016 specifies the assessment of wind loads on cranes.
It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for the structural components of cranes.
It provides a simplified method of calculation and assumes that
- the wind may blow horizontally from any direction,
- the wind blows at a constant speed,
- there is a static reaction to the wind load applied to the crane structure.
It includes built-in allowances for the effects of gusting (fluctuation in wind speed) and for dynamic response.
It gives guidance on when to secure the crane for out-of-service conditions.
| Committee |
ISO/TC 96/SC 10
|
| DevelopmentNote |
Supersedes ISO/DIS 4302. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
22
|
| ProductNote |
THIS STANDARD ALSO REFERS TO- ISO 4306
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 4302:2016 | Identical |
| BIS IS 14467 : 1997(R2003) | Identical |
| PN ISO 4302 : 1998 | Identical |
| UNE 58113:1985 | Identical |
| 17/30325088 DC : 0 | BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES |
| 11/30243784 DC : 0 | BS ISO 8686-1 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 1: GENERAL |
| 15/30281554 DC : 0 | BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS |
| BS ISO 10896-2:2016 | Rough-terrain trucks. Safety requirements and verification Slewing trucks |
| 95/540011 DC : DRAFT JAN 1995 | PREN 1777 - HIGH-RISE AERIAL APPLIANCES - HYDRAULIC PLATFORMS FOR FIRE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| ISO 8686-2:2004 | Cranes — Design principles for loads and load combinations — Part 2: Mobile cranes |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| BS EN 14044:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods |
| BS EN 280 : 2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| DIN EN 791:2010-01 | DRILL RIGS - SAFETY |
| NF EN 12158-1 : 2000 + A1 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| ISO 8686-4:2005 | Cranes — Design principles for loads and load combinations — Part 4: Jib cranes |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| 17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
| 02/708844 DC : DRAFT JULY 2002 | ISO/DIS 16368.4 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS |
| 93/711895 DC : DRAFT AUG 1993 | ISO/DIS 12485-3 - CRANES - STABILITY REQUIREMENTS - PART 3: TOWER CRANES |
| 04/30108591 DC : DRAFT JAN 2004 | ISO 8686-4 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS |
| BS 7171:1989 | Specification for mobile elevating work platforms |
| 09/30201429 DC : 0 | BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS |
| ISO 12210-1:1998 | Cranes — Anchoring devices for in-service and out-of-service conditions — Part 1: General |
| I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| ISO 10896-2:2016 | Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks |
| ISO 10972-3:2003 | Cranes — Requirements for mechanisms — Part 3: Tower cranes |
| ISO/TR 25599:2005 | Cranes — Jib cranes — International Standards for design, manufacturing, use and maintenance requirements and recommendations |
| DIN EN 1777:2010-06 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 1777:2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 280:2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| ISO 8686-3:1998 | Cranes — Design principles for loads and load combinations — Part 3: Tower cranes |
| PD ISO/TR 19961:2010 | Cranes. Safety code on mobile cranes |
| 00/541673 DC : DRAFT NOV 2000 | BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 14/30318963 DC : DRAFT DEC 2014 | BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| 93/702540 DC : DRAFT FEB 1993 | ISO/DIS 12210-4 - CRANES - OUT OF SERVICE ANCHORING DEVICES - PART 4: JIB CRANES |
| 11/30249027 DC : 0 | BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| BS ISO 4305 : 2014 | MOBILE CRANES - DETERMINATION OF STABILITY |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| ISO 16369:2007 | Elevating work platforms — Mast-climbing work platforms |
| EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| I.S. EN 61057:2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| BS ISO 16368:2003 | Mobile elevating work platforms. Design calculations, safety requirements and test methods |
| BS ISO 15442:2012+A1:2015 | Cranes. Safety requirements for loader cranes |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| ISO 8686-5:2017 | Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 93/702546 DC : DRAFT FEB 1993 | ISO/DIS 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES |
| CEI UNI EN 45510-6-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 04/102837 DC : DRAFT JAN 2004 | ISO 9926-3 - CRANES - TRAINING OF DRIVERS - PART 3: TOWER CRANES |
| BS ISO 9926-3:2016 | Cranes. Training of operators Tower cranes |
| 00/541672 DC : DRAFT NOV 2000 | BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 14/30313865 DC : 0 | BS ISO 9926-3 - CRANES - TRAINING OF OPERATORS - PART 3: TOWER CRANES |
| 05/30082472 DC : DRAFT AUG 2005 | BS 7121-1 - CODE OF PRACTICE FOR SAFE USE OF CRANES - PART 1: GENERAL |
| BS EN 61057:1994 | Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| PD ISO/TR 25599:2006 | Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| ISO/TR 19961:2010 | Cranes — Safety code on mobile cranes |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 16368:2010 | Mobile elevating work platforms — Design, calculations, safety requirements and test methods |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| DIN EN 280:2016-04 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015) |
| DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| BS EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 791 : 1996 | DRILL RIGS - SAFETY |
| EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| 04/30108943 DC : 0 | |
| 12/30246324 DC : 0 | BS ISO 4305 - MOBILE CRANES - DETERMINATION OF STABILITY |
| BS ISO 8686-5 : 2017 | CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES |
| 01/716333 DC : DRAFT DEC 2001 | BS ISO 8686-2 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 2: MOBILE CRANES |
| ISO 9926-3:2016 | Cranes — Training of operators — Part 3: Tower cranes |
| 94/714451 DC : DRAFT NOV 1994 | PREN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - SAFETY, EXAMINATION AND TESTS |
| ISO 12485:1998 | Tower cranes — Stability requirements |
| EN 16719:2018 | Transport platforms |
| BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| ISO 15442:2012 | Cranes — Safety requirements for loader cranes |
| ISO 14829:2002 | Freight containers — Straddle carriers for freight container handling — Calculation of stability |
| BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| UNE-EN 1777:2011 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| UNE-EN 280:2014 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 20332:2016 | Cranes — Proof of competence of steel structures |
Summarise
£126.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.