17/30341100 DC : 0
NA
NA
Status of Standard is Unknown
BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
£20.00
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Verification
6 Information for use
Annex A (normative) - Temporary roof support
systems (TRS)
Annex B (normative) - Stability
Annex C (normative) - Noise test code
Annex D (normative) - Whole-body and hand-arm
vibration test
Annex E (informative) - List of significant
hazards
Bibliography
BS ISO 18758-2.
| Committee |
MRE/1
|
| DocumentType |
Draft
|
| Pages |
67
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ISO 3449:2005 | Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 10264:1990 | Earth-moving machinery — Key-locked starting systems |
| ISO 20381:2009 | Mobile elevating work platforms — Symbols for operator controls and other displays |
| ISO 10262:1998 | Earth-moving machinery — Hydraulic excavators — Laboratory tests and performance requirements for operator protective guards |
| ISO 10532:1995 | Earth-moving machinery — Machine-mounted retrieval device — Performance requirements |
| ISO 18878:2013 | Mobile elevating work platforms — Operator (driver) training |
| ISO 11200:2014 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| ISO 4250-3:2011 | Earth-mover tyres and rims — Part 3: Rims |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 13124-2:2004 | Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
| ISO 10263-5:2009 | Earth-moving machinery — Operator enclosure environment — Part 5: Windscreen defrosting system test method |
| ISO 4302:2016 | Cranes — Wind load assessment |
| ISO 5349-2:2001 | Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace |
| ISO 3744:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane |
| ISO 10570:2004 | Earth-moving machinery — Articulated frame lock — Performance requirements |
| ISO 13333:1994 | Earth-moving machinery — Dumper body support and operator's cab tilt support devices |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO/TR 11688-1:1995 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning |
| ISO 15817:2012 | Earth-moving machinery — Safety requirements for remote operator control systems |
| ISO 14120:2015 | Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards |
| EN 13123-2:2004 | Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| ISO 3411:2007 | Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope |
| ISO 6683:2005 | Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests |
| ISO 6405-2:2017 | Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Symbols for specific machines, equipment and accessories |
| ISO 15667:2000 | Acoustics — Guidelines for noise control by enclosures and cabins |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
| ISO 4413:2010 | Hydraulic fluid power — General rules and safety requirements for systems and their components |
| ISO 12508:1994 | Earth-moving machinery — Operator station and maintenance areas — Bluntness of edges |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 3747:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment |
| IEC 61310-3:2007 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| ISO 3740:2000 | Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards |
| ISO 14118:2000 | Safety of machinery — Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery — Two-hand control devices — Functional aspects and design principles |
| ISO/TS 13732-2:2001 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature |
| ISO 5010:2007 | Earth-moving machinery — Rubber-tyred machines — Steering requirements |
| ISO 16528-2:2007 | Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1 |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| ISO 12510:2004 | Earth-moving machinery — Operation and maintenance — Maintainability guidelines |
| ISO 12509:2004 | Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices |
| ISO 6165:2012 | Earth-moving machinery — Basic types — Identification and terms and definitions |
| ISO 6011:2003 | Earth-moving machinery — Visual display of machine operation |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 7731:2003 | Ergonomics — Danger signals for public and work areas — Auditory danger signals |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN 15152:2007 | Railway applications - Front windscreens for train cabs |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 13856-2:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
| ISO 4250-2:2017 | Earth-mover tyres and rims — Part 2: Loads and inflation pressures |
| ISO 9244:2008 | Earth-moving machinery — Machine safety labels — General principles |
| ISO 10263-3:2009 | Earth-moving machinery — Operator enclosure environment — Part 3: Pressurization test method |
| ISO 16368:2010 | Mobile elevating work platforms — Design, calculations, safety requirements and test methods |
| ISO 4250-1:2017 | Earth-mover tyres and rims — Part 1: Tyre designation and dimensions |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 15818:2017 | Earth-moving machinery — Lifting and tying-down attachment points — Performance requirements |
| ISO 5006:2017 | Earth-moving machinery — Operator's field of view — Test method and performance criteria |
| ISO 4309:2010 | Cranes — Wire ropes — Care and maintenance, inspection and discard |
| ISO 14567:1999 | Personal protective equipment for protection against falls from a height — Single-point anchor devices |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| ISO 9355-3:2006 | Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators |
| ISO 6405-1:2017 | Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols |
| ISO 10263-2:2009 | Earth-moving machinery — Operator enclosure environment — Part 2: Air filter element test method |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 14990-3:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 3: Particular requirements for self-powered machines |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 13766:2006 | Earth-moving machinery — Electromagnetic compatibility |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| ISO 10263-4:2009 | Earth-moving machinery — Operator enclosure environment — Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance |
| ISO 4414:2010 | Pneumatic fluid power — General rules and safety requirements for systems and their components |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 5349-1:2001 | Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements |
| ISO 10263-6:2009 | Earth-moving machinery — Operator enclosure environment — Part 6: Determination of effect of solar heating |
| ISO 16001:2008 | Earth-moving machinery — Hazard detection systems and visual aids — Performance requirements and tests |
| ISO 7000:2014 | Graphical symbols for use on equipment — Registered symbols |
| ISO/TR 22100-2:2013 | Safety of machinery — Relationship with ISO 12100 — Part 2: How ISO 12100 relates to ISO 13849-1 |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| ISO 13856-3:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
| ISO 11228-1:2003 | Ergonomics — Manual handling — Part 1: Lifting and carrying |
| ISO 6016:2008 | Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
| ISO 9533:2010 | Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and performance criteria |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 2: Introduction to the physics of low-noise design |
| ISO 3450:2011 | Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems |
| ISO 11201:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 22448:2010 | Earth-moving machinery — Anti-theft systems — Classification and performance |
| ISO 14990-2:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines |
| ISO 10263-1:2009 | Earth-moving machinery — Operator enclosure environment — Part 1: Terms and definitions |
| ISO 9355-2:1999 | Ergonomic requirements for the design of displays and control actuators — Part 2: Displays |
| ISO Guide 78:2008 | Safety of machinery — Rules for drafting and presentation of safety standards |
| ISO 19353:2015 | Safety of machinery — Fire prevention and fire protection |
| ISO 6750:2005 | Earth-moving machinery — Operator's manual — Content and format |
| ISO 10968:2004 | Earth-moving machinery — Operator's controls |
| ISO 10265:2008 | Earth-moving machinery — Crawler machines — Performance requirements and test procedures for braking systems |
Summarise
£20.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.