MIL-B-913 Base Document:1993
Current
The latest, up-to-date edition.
Bearings, Ball, Annular, for Instruments and Precision Rotating Components (Metric), General Specification for
English
05-03-1993
1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PACKAGING
6 NOTES
Describes annular ball bearings intended primarily for use in instruments and precision rotating components.
| DocumentType |
Standard
|
| Pages |
26
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This specification covers annular ball bearings intended primarily for use in instruments and precision rotating components.
| MIL-B-913-2 Base Document:1993 | Bearing, Ball, Annular, for Instruments and Precision Rotating Components, Deep Groove, Unflanged, Chromium-Alloy Steel, ABEC 7P (Metric) |
| MIL-STD-1647 Revision E:2003 | Identification Markings For Domestically Manufactured Bearings, Ball, Annular For Instruments And Precision Components |
| ISO 3290:2001 | Rolling bearings — Balls — Dimensions and tolerances |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-G-81937 Revision A:1984 | Grease, Instrument, Ultra-Clean, Metric |
| MIL-S-81087 Revision C:1981 | SILICONE FLUID, CHLORINATED PHENYL METHYL POLYSILOXANE, NATO CODE NUMBER H-536 (NO S/S DOCUMENT) |
| MIL-STD-1647 Revision E:2003 | Identification Markings For Domestically Manufactured Bearings, Ball, Annular For Instruments And Precision Components |
| ASME B89.3.1 : 1972 | MEASUREMENT OF OUT-OF-ROUNDNESS |
| MIL-STD-45662 Revision A:1988 | Calibration Systems Requirements (Refer to ISO-10012-1 and ANSI-Z540-1 or Comparable Standards as Alternatives to MIL-STD-45662) |
| MIL-STD-206 Revision B:1988 | Friction Torque Testing for Bearings, Ball, Annular (Instrument Type) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| FED-STD-209 Revision E:1992 | Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones (S/S by ISO14644-1 and ISO14644-2) |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-B-81744 Revision A:1973 | Barrier Coating Solution, Lubricant Migration Deterring |
| SAE AMS2303F | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure |
| QQ-S-766 Revision D:1988 | Steel, Stainlessand Heat Resisting, Alloys, Plate, Sheetand Strip (S/S By ASTM-A240, ASTM-A666,and ASTM-A693) |
| MIL-STD-1334 Revision B:1977 | Process for Barrier Coating of Anti-Friction Bearings |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| MIL G 83261 : A | GREASE, AIRCRAFT, EXTREME PRESSURE, ANTI WEAR |
| MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| MIL L 81846 : A | LUBRICATING OIL, INSTRUMENT, BALL BEARING, HIGH FLASH POINT |
| MIL G 81322 : E | GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395 |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| SAE AMS6444M | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 – 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted |
| ISO 1224:1984 | Rolling bearings — Instrument precision bearings |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.