MIL-DTL-18110 Revision G:2018
Current
The latest, up-to-date edition.
Valves, Gate Type, Steel Sizes 2-1/2 Inchesto 16 Inches)
English
05-03-2018
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies steel gate type valves, in sizes from 2[1/2] to 16 inches, for shipboard steam, water, and oil services.
| DevelopmentNote |
Supersedes MIL V 18110 (F). (04/2018)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers steel gate type valves, in sizes from 2½ to 16 inches, for shipboard steam, water, and oil services.
| SAE J1086_201210 | Numbering Metals and Alloys |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| MIL-G-24716 Revision A:1993 | Gaskets, Metallic-Flexible Graphite, Spiral Wound |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| MIL-R-17131 Revision C:1981 | Rods and Powders, Welding, Surfacing |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| MIL-P-24503 Revision B:1991 | PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| SAE AS15003C | FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, 1/8 PIPE THREADS, STEEL, TYPE III |
| MIL P 24583 : B | PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MSS SP 61 : 2013 | PRESSURE TESTING OF VALVES |
| SAE AS35411C | Fittings, Lubrication |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-P-15024-5 Base Document:1971 | Plate, Identification |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| ASTM F 2168 : 2013 : REDLINE | Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| MSS SP 91 : 2009 | GUIDELINES FOR MANUAL OPERATION OF VALVES |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
| MIL-DTL-24696 Revision C:2008 | Gasket, Sheet, Non-Asbestos |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.