ASTM A 312/A312M : 2017-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
Published date
01-03-2017
Superseded date
21-01-2018
Sorry this product is not available in your region.
CONTAINED IN VOL. 01.01, 2018 Describes seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A 312. (10/2001) Supersedes ASTM A 430/A430M. (02/2002)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| 14/30286326 DC : 0 | BS ISO 18611-3 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 3: HANDLING, TRANSPORTATION AND STORAGE |
| MIL-PRF-32080 Revision G:2014 | Truck, Aircraft Fueling-Defueling, 6,000 Gallon, A/S32R-11 |
| ASTM F 2805 : 2016 : REDLINE | Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections |
| ASTM B 677:2005 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
| ASTM F 1333 : 1991 : R2013 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| ASTM F 1076 : 1987 : R1997 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| AWWA C563 : 2014 | FABRICATED COMPOSITE SLIDE GATES |
| ANSI/AWWA C561 : 2014 | FABRICATED STAINLESS-STEEL SLIDE GATES |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices |
| I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| ASTM A 999/A999M : 2018 : REDLINE | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| ASTM B 677 : 2005 : R2010 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM B 677 : 2005 : R2010 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
| ASTM B 673 : 2005 : R2016 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| BS EN ISO 13704:2007 | Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
| EN 13312-4:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-DTL-24299 Revision B:2017 | Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard |
| MSS SP 130 : 2013 | BELLOWS SEALS FOR INSTRUMENT VALVES |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| MIL-DTL-24749 Revision B:2014 | Grounding Straps andStuds, Electrical Bonding |
| ASTM F 1076 : 1987 : R2004 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ASTM F 1076 : 1987 : R2010 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| 96/706683 DC : MAY 96 | ISO 13707 RECIPROCATING COMPRESSORS FOR THE PETROLEUM AND GAS INDUSTRIES |
| BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
| ASTM F 2854 : 2010 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| ASTM B 673 : 2005 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| NSF 61 : 2017 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 3226/F3226M : 2016 : EDT 1 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1333 : 1991 : R2007 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| ASTM F 2015 : 2000 | Standard Specification for Lap Joint Flange Pipe End Applications |
| ASTM F 1197 : 2000 | Standard Specification for Sliding Watertight Door Control Systems |
| ASTM F 2896 : 2011 : R2017 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ISO 18611-3:2014 | Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 3: Handling, transportation and storage |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.3:2016 | PROCESS PIPING |
| ASTM A 733 : 2016 : REDLINE | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| MIL-DTL-18110 Revision G:2018 | Valves, Gate Type, Steel Sizes 2-1/2 Inchesto 16 Inches) |
| AWWA C562 : 2014 | FABRICATED ALUMINUM SLIDE GATES |
| ASTM F 1333 : 1991 : R1996 : EDT 1 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| ASTM F 3226/F3226M : 2016 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
| MSS SP 117 : 2011 | BELLOWS SEALS FOR GLOBE AND GATE VALVES |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| AWWA C220 : 2017 | STAINLESS-STEEL PIPE, 1/2 IN. (13 MM) AND LARGER |
| API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM C 852/C852M : 2017 : REDLINE | Standard Guide for Design Criteria for Plutonium Gloveboxes |
| ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 13704:2007 | Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries |
| ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
| ISO 13631:2002 | Petroleum and natural gas industries — Packaged reciprocating gas compressors |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| CSA B51S1 : 2005 | SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| I.S. EN ISO 13704:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| AISC N690L : 2003 | LOAD AND RESISTANCE FACTOR DESIGN OF SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES |
| MSS SP 119 : 2010 | FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING |
| API 530 REDLINE : 2008 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| ASTM F 1076 : 1987 | PRACTICE FOR EXPANDED WELDED AND SILVER BRAZED SOCKET JOINTS FOR PIPE AND TUBE |
| AWWA C226 : 2013 | STAINLESS-STEEL FITTINGS FOR WATERWORKS SERVICE, SIZES 1/2 IN. THROUGH 72 IN. (13 MM THROUGH 1,800 MM) |
| ASTM F 1197 : 2000 : R2012 | Standard Specification for Sliding Watertight Door Control Systems |
| ASTM F 1333 : 1991 : R2002 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
| SAE J2551_201309 | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| AISC N690 : 2015 | SPECIFICATION FOR SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES |
| ASTM F 1333 : 1991 | SPECIFICATION FOR CONSTRUCTION OF FIRE AND FOAM STATION CABINETS |
| ASTM B 673 : 2005 : R2011 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
| BS EN 13312-4:2001 | Biotechnology. Performance criteria for piping and instrumentation Tubes and pipes |
| BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
| ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
| EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
| MIL-DTL-17849 Revision F:2018 | Strainers, Sediment, Pipeline, Duplex (with and without Magnet) |
| BS ISO 18611-3:2014 | Ships and marine technology. Marine NOx reduction agent AUS 40 Handling, transportation and storage |
| ASTM F 1076 : 1987 : R2015 : EDT 1 | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS ISO 13704:2001 | Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
| ASTM B 677 : 2005 : R2016 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
| ASTM B 673 : 2005 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM F 2854 : 2010 : R2016 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| MIL-STD-777 Revision F:2012 | Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASTM F 1197 : 2000 : R2007 | Standard Specification for Sliding Watertight Door Control Systems |
| ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 2896 : 2011 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM A 778/A778M : 2016 : REDLINE | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM B 673 : 2005 : R2011 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM F 2015 : 2000 : R2006 | Standard Specification for Lap Joint Flange Pipe End Applications |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ASTM F 2015 : 2000 : R2013 | Standard Specification for Lap Joint Flange Pipe End Applications |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| ASME B73.2 : 2016 | Specification for Vertical In-Line Centrifugal Pumps for Chemical Process |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| SAE J1086_201210 | Numbering Metals and Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME B36.10 : 1979 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASME B36.19 : 1976 | STAINLESS STEEL PIPE |
Summarise
Sorry this product is not available in your region.