MIL-PRF-32080 Revision G:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Truck, Aircraft Fueling-Defueling, 6,000 Gallon, A/S32R-11
English
19-05-2014
07-01-2021
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - RELIABILITY AND MAINTAINABILITY
Specifies the requirements for one type of aircraft refueling cargo tank truck capable of refueling and defueling military and commercial aircraft on Government installations worldwide.
| DocumentType |
Standard
|
| Pages |
99
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This specification covers the requirements for one type of aircraft refueling cargo tank truck capable of refueling and defueling military and commercial aircraft on government installations worldwide. The aircraft refueling truck is compliant with all applicable Department of Transportation (DOT) regulations for transportation and is air transportable in C-130, C-17, and C-5 aircraft.
| SAE J 1614 : 2010 | WIRING DISTRIBUTION SYSTEMS FOR OFF-ROAD, SELF-PROPELLED WORK MACHINES |
| MIL-A-25896 Revision E:1983 | Adapter, Pressure Fuel Servicing, Nominal 2.5-Inch Diameter |
| A-A-393 Revision A:1996 | Extinguisher, Fire, Dry Chemical (Hand Portable) |
| FED-STD-297 Revision E:1985 | Rustproofing of Commercial (Nontactical) Vehicles |
| SAE J682_201105 | Rear Wheel Splash and Stone Throw Protection |
| SAE J1099_200208 | Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous Materials |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| A-A-52624 Revision A:2001 | Antifreeze, Multi Engine Type |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| FED-STD-807 Revision M:2005 | Trucks: Heavy Commercial, 6X4 and 6X6, 19,500 to 30,000 KG (43,000 to 66,000 pounds) GVWR |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| AWS D1.2/D1.2M : 2014 | STRUCTURAL WELDING CODE - ALUMINUM |
| GOST 10227 : 1986 AMD 6 2012 | |
| MIL-STD-1791 Revision C:2017 | Designing for Internal Aerial Delivery in Fixed Wing Aircraft |
| MIL-DTL-25959 Revision H:2012 | Tie Down, Tensioners, Cargo, Aircraft |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| A-A-59326 Revision D:2011 | Coupling Halves, Quick-Disconnect, Cam-Locking Type, General Specification for |
| MIL-HDBK-781 Revision A:1996 | Reliability Test Methods, Plans, and Environments for Engineering Development, Qualification, and Production |
| SAE J695_201106 | Turning Ability and Off Tracking - Motor Vehicles |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-DTL-25524 Revision F:2015 | Turbine Fuel, Aviation, Thermally Stable (JPTS) |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| MIL-HDBK-338 Revision B:1998 | Electronic Reliability Design Handbook |
| MIL-PRF-27260 Revision D:2013 | Tie Down, Cargo, Aircraft, CGU-1/B |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| SAE J534_201508 | Lubrication Fittings |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| MIL-DTL-53039 Revision E:2013 | Camouflage Coating, Solvent Based, Chemical Agent Resistant |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL-HDBK-217 Revision F:1991 | Reliability Prediction of Electronic Equipment |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| CFR 49(PTS 300-399) : OCT 2017 | TRANSPORTATION |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| SAE ARP1247D | Aircraft Ground Support Equipment — General Requirements |
| MIL-HDBK-1223 Base Document:1998 | Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and Data Plate Standards |
| A-A-50696 Revision D:2016 | Reels, Static Discharge, Grounding, 50, 75, and 100Foot Cable Lengths |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| MIL-STD-1366 Revision E:2006 | Transportability Criteria |
| ASME PV CODE 8 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF PRESSURE VESSELS (SET) |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| MIL-B-18013-1 Base Document:1994 | Battery, Storage, Support Equipment |
| A-A-52557 Revision A:2001 | Fuel Oil, Diesel; for Posts, Camps and Stations (S/S by ASTM-D975) |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| SAE J994_201409 | Alarm—Backup—Electric Laboratory Performance Testing |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.