• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-HDBK-217 Revision F:1991

Current
Current

The latest, up-to-date edition.

RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
Available format(s)

PDF

Section 1: Scope
1.1 Purpose
1.2 Application
1.3 Computerized reliability prediction
Section 2: Reference documents
Section 3: Introduction
3.1 Reliability engineering
3.2 The role of reliability prediction
3.3 Limitations of reliability predictions
3.4 Part stress analysis prediction
Section 4: Reliability analysis evaluation
Section 5: Microcircuits, introduction
5.1 Gate/logic arrays and microprocessors
5.2 Memories
5.3 VHSIC/VHSIC like
5.4 GaAs MMIC and digital devices
5.5 Hybrids
5.6 SAW devices
5.7 Magnetic bubble memories
5.8 Pi T table for all
5.9 C2 table for all
5.10 Pi E, pi L and pi Q tables for all
5.11 TJ determination, (all except hybrids)
5.12 TJ determination, (for hybrids)
5.13 Examples
Section 6: Discrete semiconductors
6.0 Discrete semiconductors, introduction
6.1 Diodes, low frequency
6.2 Diodes, high frequency (microwave, RF)
6.3 Transistors, low frequency, bipolar
6.4 Transistors, low frequency, Si FET
6.5 Transistors, unijunction
6.6 Transistors, low noise, high frequency, bipolar
6.7 Transistors, high power, high frequency, bipolar
6.8 Transistors, high frequency, GaAs FET
6.9 Transistors, high frequency, Si FET
6.10 Thyristors and SCRs
6.11 Optoelectronics, detectors, isolators, emitters
6.12 Optoelectronics, alphanumeric displays
6.13 Optoelectronics, laser diode
6.14 TJ determination
6.15 Example
Section 7: Tubes
7.1 All types except TWT and magnetron
7.2 Traveling wave
7.3 Magnetron
Section 8: Lasers
8.0 Introduction
8.1 Helium and argon
8.2 Carbon dioxide, sealed
8.3 Carbon dioxide, flowing
8.4 Solid state, ND:YAG and Ruby Rod
Section 9: Resistors
9.0 Introduction
9.1 Fixed, composition (RCR, RC)
9.2 Fixed, film (RLR, RL, RN, (R,C, or N), RN)
9.3 Fixed, film, power (RD)
9.4 Network, fixed, film (RZ)
9.5 Fixed, wirewound (RBR, RB)
9.6 Fixed, wirewound, power (RWR, RW)
9.7 Fixed, wirewound, power, chassis mounted (RER,
       RE)
9.8 Thermistor (RTH)
9.9 Variable, wirewound (RTR, RT)
9.10 Variable, wirewound, precision (RR)
9.11 Variable, wirewound, semiprecision (RA, RK)
9.12 Variable, wirewound, power (RP)
9.13 Variable, nonwirewound (RJ, RJR)
9.14 Variable, composition (RV)
9.15 Variable, nonwirewound, film and precision (RQ,
       RVC)
9.16 Calculation of stress ratio for potentiometers
9.17 Example
Section 10: Capacitors
10.1 Fixed, paper, by-pass (CP, CA)
10.2 Fixed, feed-through (CZR, CZ)
10.3 Fixed, paper and plastic film (CPV, CQR and CQ)
10.4 Fixed, metallized paper, paper-plastic and
       plastic (CH, CHR)
10.5 Fixed, plastic and metallized plastic
10.6 Fixed, super-metallized plastic (CRH)
10.7 Fixed, MICA (CM, CMR)
10.8 Fixed, MICA, button (CB)
10.9 Fixed, glass (CY, CYR)
10.10 Fixed, ceramic, general purpose (CK, CKR)
10.11 Fixed, ceramic, temperature compensating and chip
       (CCR and CC, CDR)
10.12 Fixed, electrolytic, tantalum, solid (CSR)
10.13 Fixed, electrolytic, tantalum, non-solid (CL,CLR)
10.14 Fixed, electrolytic, aluminium (CUR and CU)
10.15 Fixed, electrolytic (dry), aluminium (CE)
10.16 Variable, ceramic (CV)
10.17 Variable, piston type (PC)
10.18 Variable, air trimmer (CT)
10.19 Variable and fixed, gas or vacuum (CG)
10.20 Example
Section 11: Inductive devices
11.1 Transformers
11.2 Coils
11.3 Determination of hot spot temperature
Section 12: Rotating devices
12.1 Motors
12.2 Synchros and resolvers
12.3 Elapsed time meters
12.4 Example
Section 13: Relays
13.1 Mechanical
13.2 Solid state and time delay
Section 14: Switches
14.1 Toggle or pushbutton
14.2 Basic sensitive
14.3 Rotary
14.4 Thumbwheel
14.5 Circuit breakers
Section 15: Connectors
15.1 General (except printed circuit board)
15.2 Printed circuit board
15.3 Integrated circuit sockets
Section 16: Interconnection assemblies
16.1 Interconnection assemblies with plated through
       holes
Section 17: Connections
17.1 Connections
Section 18: Meters
18.1 Meters, panel
Section 19: Quartz crystals
19.1 Quartz crystals
Section 20: Lamps
20.1 Lamps
Section 21: Electronic filters
21.1 Electronic filters, non-tunable
Section 22: Fuses
22.1 Fuses
Section 23: Miscellaneous parts
23.1 Miscellaneous parts
Appendix A: Parts count reliability prediction
Appendix B: VHSIC/VHSIC-like and VLSI CMOS (detailed
             model
Appendix C: Bibliography
Tables
3-1 Parts with multi-level quality specifications
3-2 Environmental symbol and description
4-1 Reliability analysis checklist
6-1 Default case temperatures for all environments
       (deg C)
6-2 Approximate thermal resistance for semiconductor
       devices in various package sizes
Figures
5-1 Cross sectional view of a hybrid with a single
       multi-layered substrate
8-1 Examples of active optical surfaces
9-1 MIL-R-39008 derating curve

Establishes uniform methods for predicting the reliability of military electronic equipment and systems. It gives a common basis for reliability predictions during acquisition programmes and in the evaluation of related or competitive design. Part Stress Analysis and Parts Count are the 2 methods used. Coverage includes reliability analysis evaluation, discrete semiconductors and rotating devices.

DevelopmentNote
New child NOT 1 2022 is added
DocumentType
Standard
Pages
323
ProductNote
New child NOT 1 2022 is added
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

MIL-M-28787-347 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC CLOCK, MICROPROCESSOR MODULE, KEY CODE TRU
FAA AC 33.28-1 : 0 COMPLIANCE CRITERIA FOR 14 CFR SECTION 33.28, AIRCRAFT ENGINES, ELECTRICAL AND ELECTRONIC ENGINE CONTROL SYSTEMS
MIL-M-28787-360 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER, DATA MODULE, KEY CODE DFH
MIL-C-28779 Revision B:1972 COMBINER, EXTENDED FREQUENCY RANGE CU-2OO7 (/SRR)
MIL-P-0081653 Revision C:1987 POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR
BS EN 61514-2:2013 Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
DEFSTAN 00-13/3(1994) : 1994 REQUIREMENTS FOR THE ACHIEVEMENT OF TESTABILITY IN ELECTRONIC AND ALLIED EQUIPMENT
MIL-F-24291 Revision C:1990 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
SAE AS 5506/1 : 2015 SAE ARCHITECTURE ANALYSIS AND DESIGN LANGUAGE (AADL) ANNEX VOLUME 1: ANNEX A: ARINC653 ANNEX, ANNEX C: CODE GENERATION ANNEX, ANNEX E: ERROR MODEL ANNEX
SAE ARP 1798 : 2012 PORTABLE EMERGENCY LIGHTING SYSTEMS FOR FLIGHT CREW MEMBERS
MIL-HDBK-59 Revision B:1994 COMPUTER AIDED ACQUISITION AND LOGISTIC SUPPORT (CALS) PROGRAM IMPLEMENTATION GUIDE
MIL-A-83577 Revision B:1988 ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR
ISO/TR 19972-1:2009 Hydraulic fluid power Methods to assess the reliability of hydraulic components Part 1: General procedures and calculation method
MIL-STD-1629 Revision A:1980 PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS
MIL-PRF-32080 Revision G:2014 TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11
BS EN 61204:1995 Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
MIL-R-2729 Revision D:1992 REGULATOR EXCITER SYSTEMS, VOLTAGE, A.C. GENERATOR, NAVAL SHIPBOARD USE
XP PREN 3567-004 : 1993 XP AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 004: DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD
BS EN 16590-2:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase
MIL-V-28712 Base Document:1969 VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR
MIL-STD-690 Revision D:2005 Failure Rate (FR) Sampling Plans and Procedures
MIL-PRF-71185 Revision A:2013 Dynamic Reference Unit-Hybrid-Replacement (DRU-H-R)
MIL-STD-2218 Base Document:1992 THERMAL DESIGN, ANALYSIS & TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT
MIL-M-28787-363 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER/TIMING MODULE KEY CODE CEM
MIL-STD-756 Revision B:1981 RELIABILITY MODELING AND PREDICTION
MIL P 24765 : 0 POWER SUPPLY, UNINTERRUPTIBLE, STATIC
MIL-A-85055 Base Document:1979 AVIONICS SYSTEM PERFORMANCE SPECIFICATION FOR A-4M/AV-8 BOMBING SET, ANGLE RATE AN/ASB-19(V)
NASA SP 580 : 2011 NASA SYSTEM SAFETY HANDBOOK - VOLUME 1, SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR IMPLEMENTATION
MIL-M-28787-362 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC DRIVER/RECEIVER DIFFERENTIAL MODULE, KEY CODE HJN
MIL-A-28716 Base Document:1969 AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR
UTEC 96 029-1 : 2011 GROUP OF ELECTRONIC EQUIPMENT OBSOLESCENCE - A METHODOLOGICAL GUIDE SIZING INVENTORY END OF LIFE COMPONENTS AND ELECTRONIC SUBASSEMBLIES
GEIA STD 0008 : 2011 DERATING OF ELECTRONIC COMPONENTS
MIL-STD-1556 Revision B:1986 GOVERNMENT/INDUSTRY DATA EXCHANGE PROGRAM CONTRACTOR PARTICIPATION REQUIREMENTS
DEFSTAN 02-45/2(2000) : 2000 REQUIREMENTS FOR THE APPLICATION OF RELIABILITY-CENTRED MAINTENANCE TECHNIQUES TO HM SHIPS, SUBMARINES, ROYAL FLEET AUXILIARIES AND OTHER NAVAL AUXILIARY VESSELS
MIL-I-85071 Revision A:1992 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
BS EN 16602-30-09:2014 Space product assurance. Availability analysis
PD ISO/TR 19972-1:2009 Hydraulic fluid power. Methods to assess the reliability of hydraulic components General procedures and calculation method
MIL-HDBK-470 Revision A:1997 DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
MIL-F-24638 Base Document:1984 FREQUENCY CHANGER, SOLID STATE, AIR COOLED (NAVAL SHIPBOARD)
MIL-DTL-62421 Revision A:2009 CONTROL, UNIT, ELECTRONIC, DIGITAL
HRD 4 : 87 AMD 1 HANDBOOK OF RELIABILITY DATA FOR COMPONENTS USED IN TELECOMMUNICATIONS SYSTEMS
CEI CLC/TR 50506-1 : 2007 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE
MIL STD 2080 : 0 MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT
MIL-I-38338 Revision D:1991 INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC
MIL-M-28787-361 Base Document:1991 MODULES, STANDARD ELECTRONIC DYNAMIC RANDOM ACCESS MEMORY MODULE, KEY CODE CJK
UNI EN 16590-2 : 2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
PREN 16590-2 : DRAFT 2013 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
TR 332 : ISSUE 6 RELIABILITY PREDICTION PROCEDURE FOR ELECTRONIC EQUIPMENT
MIL-R-85669 Base Document:1988 REPEATER SET, RADIO, POD AN/ARQ-49
SAE AIR 6006 : 2009 MODELING AND SIMULATION CAPABILITIES FOR AEROSPACE WDM LAN APPLICATIONS
IEC TS 62239-2:2017 Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
PREN 3567-004 : 200P1 AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD
ISO 20188:2018 Space systems — Product assurance requirements for commercial satellites
ARINC 655 : 1999 REMOTE DATA CONCENTRATOR (RDC) GENERIC DESCRIPTION
SAE AS 8054 : 1996 AIRBORNE ENGINE VIBRATION MONITORING (EVM) SYSTEM, GUIDELINES FOR PERFORMANCE STANDARD FOR
SAE ARP 5120 : 2016 AIRCRAFT GAS TURBINE ENGINE HEALTH MANAGEMENT SYSTEM DEVELOPMENT AND INTEGRATION GUIDE
ISO 26262-5:2011 Road vehicles Functional safety Part 5: Product development at the hardware level
I.S. EN 16590-2:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
IEEE 1505.1-2008 IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
MIL-STD-883 Revision K:2016 TEST METHOD STANDARD - MICROCIRCUITS
PD IEC/TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
BS EN 14044:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods
IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
I.S. EN 14043:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
EN 60825-2:2004/A2:2010 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
EN 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
EN 62308 : 2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
CLC/TR 50506-2 : 2009 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE
MIL-STD-1678-1 Revision D:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS)
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
MIL-DTL-24299 Revision B:2017 HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD
MIL-C-85521 Base Document:1983 CONCENTRATOR, OXYGEN, GGU-7/A
MIL-E-29581 Base Document:1991 EARCUP, UNIT ACTIVE NOISE REDUCTION SYSTEM
MIL-M-28787-336 Revision A:1991 MODULE, STANDARD ELECTRONIC INTERFACE, MICROPROCESSOR MODULE, KEY CODE NBQ
MIL-STD-2097 Revision A:1989 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
DIN EN 16590-2:2014-11 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
IEC PAS 62647-3:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes
MIL-S-24187 Revision E:1991 SWITCH ASSEMBLIES, LINEAR MOVEMENT, MANUAL AND REMOTE OPERATION, GENERAL SPECIFICATION FOR
EIA CMB 6-1 : 2014 STABILIZED CONFIGURATION AND DATA MANAGEMENT REFERENCES
MIL-HDBK-2067 Base Document:1999 AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR
MIL-DTL-16377 Revision J:2014 Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for
BS EN 61508-6:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3
PD CLC/TR 50506-2:2009 Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Safety assurance
MIL-G-21410 Revision A:1991 GOVERNING SYSTEMS, SPEED AND LOAD-SENSING NAVAL SHIPBOARD USE
MIL-C-0024196 Revision B:1991 CLEANING SYSTEMS, ULTRASONIC
MIL-C-24196 Revision A:1988 CLEANING SYSTEM, ULTRASONIC
BS EN 61069-5:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability
BS 5760-5:1991 Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA)
IEEE 1413.1 : 2002 SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413
VDE 0661 : 1988 PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA
MIL-T-29402 Base Document:1982 TEST SET TS 3354/PRC 68
MIL-F-24713 Base Document:1989 FREQUENCY CHANGER, STATIC, AIR COOLED (NAVAL SHIPBOARD)
MIL-A-22523 Revision E:1968 ANALYZER-INDICATOR, DEAD RECKONING (DRAI) (NAVAL SHIPBOARD)
MIL-HDBK-2097 Revision A:1997 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
BS EN 62308:2006 Equipment reliability. Reliability assessment methods
SAE AS 5625 : 2014 MINIMUM PERFORMANCE STANDARDS FOR STATIC ELECTRIC POWER FREQUENCY CONVERTERS
MIL-E-11991 Revision E:1983 ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR
MIL-R-24061 Revision B:1972 RADIAC SET, AN/PDR-27
MIL-S-24771 Base Document:1992 SENSOR, LEVEL, FLOAT TYPE, SHIPBOARD SEWAGE SYSTEMS
SAE ARP 5584 : 2011 DOCUMENT FOR ELECTRIC POWER MANAGEMENT
PREN 3567-001 : 200P1 AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - TECHNICAL SPECIFICATION
CSA 6.19-17 Residential carbon monoxide alarming devices
SAE ARP 5890 : 2011 GUIDELINES FOR PREPARING RELIABILITY ASSESSMENT PLANS FOR ELECTRONIC ENGINE CONTROLS
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 60825-2:2004 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 14044:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
VDI 4007:2012-06 Reliability goals - Determination, check, review, certificate
BS 5760-2:1994 Reliability of systems, equipment and components Guide to the assessment of reliability
MIL-DTL-32015 Base Document:1999 MICROPHONES, LINEAR, GENERAL SPECIFICATION FOR
SAE ARP 1834 : 1997(S2018) FAULT/FAILURE ANALYSIS FOR DIGITAL SYSTEMS AND EQUIPMENT
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
MIL-HDBK-344 Revision A:1993 ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT
MIL-M-9397 Revision E:1979 FREQUENCY CONVERTER, MOBILE, TYPE MC-1A
MIL-M-28787-458 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC ULTRAVIOLET LIGHT ERASABLE PROGRAMMABLE READ ONLY MEMORY (UV EPROM) MODULE
PD ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Application of concepts
BS IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505<sup>TM</sup>
I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
MIL-F-24259 Revision A:1987 FLUID FLOWMETER, VOLUME VELOCITY TYPE
MIL-PRF-26139 Revision E:2015 TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
08/30193470 DC : DRAFT NOV 2008 BS EN 61508-6 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
MIL-S-16032 Revision M:1987 SWITCH & DETECTORS, SHIPBOARD ALARM SYSTEM
16/30320037 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
MIL-T-28735 Base Document:1970 TEST SET RADAR AM UPM 137
MIL-STD-1635 Base Document:1973 RELIABILITY GROWTH TESTING
XP PREN 3567-001 : 1993 XP AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 001: TECHNICAL SPECIFICATION
MIL-STD-1388-2 Revision B:1991 DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD
MIL-T-28764 Base Document:1971 TEST SET, RADAR, AN/UPM-136
SR TSY 001171 : ISSUE 1 METHODS AND PROCEDURES FOR SYSTEM RELIABILITY ANALYSIS
MIL E 24021 : J NOTICE 1 ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT
CEI EN 61514-2 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY
MIL-STD-1547 Revision B:1992 ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES
DOD HDBK 344 : A ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT
BS ISO 25119-2:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase
MIL-R-24086 Revision B:1972 RADIAC SET AN PDR 45
MIL M 62545 : B MODULE, STANDARD ELECTRONIC CONTROL
MIL-C-85248 Revision A:1984 CAMERA, STILL PICTURE, PANORAMIC, KA-99A
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
SAE ARD 50024 : A2003 FIBER OPTIC COUPLED SENSORS FOR AEROSPACE APPLICATIONS
GEIASTD0007B:2013 LOGISTICS PRODUCT DATA
DEFSTAN 00-41(PT3)/2(1989) : 1989 MOD PRACTICES AND PROCEDURES FOR RELIABILITY AND MAINTAINABILITY - PART 3: RELIABILITY PREDICTION
UNE-EN 61508-6:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
MIL-T-81832 Base Document:1971 TEST SET, ALTIMETER SET AN/APM-348
MIL-M-28787-354 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE, BUS MODULE, KEY CODE AFG
MIL-M-28787-351 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC 68000 SUPPORT MODULE, KEY CODE ASC
MIL S 62546 : A SENSOR, FIRE, OPTICAL
DOD-W-24644 Base Document:1984 WELDING MACHINE, ARC, DIRECT CURRENT, 300 AMPERE, VARIABLE VOLTAGE, TRANSFORMER RECTIFIER TYPE, DAMAGE CONTROL, LIGHT WEIGHT, PORTABLE (METRIC)
MIL-STD-1543 Revision B:1988 RELIABILITY PROGRAM REQUIREMENTS FOR SPACE AND LAUNCH VEHICLES
DEFSTAN 00-41/3(1993) : 1993 RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES
XP PREN 3567-003 : 1993 XP AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 003: SINGLE IN-LINE COUPLERS - PRODUCT STANDARD
MIL-M-28787-356 Base Document:1991 MODULES, DIGITAL, STANDARD ELECTRONIC SUPPORT, MPU COMMUNICATIONS MODULE, KEY CODE AHH
SAE ARP 5580 : 2012 RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS
SAE AIR 1277 : 2005 COOLING OF MILITARY AVIONIC EQUIPMENT
IEC TS 62647-3:2014 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes
SAE AS 5498 : 2017 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR INFLIGHT ICING DETECTION SYSTEMS
BS ISO 26262-5:2011 Road vehicles. Functional safety Product development at the hardware level
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
I.S. EN 61508-6:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™
ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Part 1: Application of concepts
ISO/TS 15998-2:2012 Earth-moving machinery Machine control systems (MCS) using electronic components Part 2: Use and application of ISO 15998
I.S. EN 61204:1996 LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS
IEC 61514-2:2013 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
IEEE 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems
EN 3567-001 : 2001 AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 001: TECHNICAL SPECIFICATION
EN 3567-004:2001 AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 004: DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD
UNI EN 14043 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
UNI EN 14044 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
ISO 25119-2:2010 Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 2: Concept phase
PD IEC/TS 62239-2:2017 Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan
MIL-M-28787-364 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC REGISTER MODULE, KEY CODE DGJ
MIL-STD-2077 Revision B:1991 TEST PROGRAM SETS GENERAL REQUIREMENTS FOR
MIL-DTL-32086 Base Document:2004 Intercom, Portable
DIN EN 16590-2 E : 2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
DEFSTAN 18-1/2(1990) : 1990 GUIDELINES AND STANDARDS FOR THE PROCUREMENT OF MILITARY SPACECRAFT SYSTEMS
MIL-STD-785 Revision B:1980 RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION
PD CLC/TR 50506-1:2007 Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Cross-acceptance
MIL-M-28787-357 Base Document:1991 MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER, DMA MODULE, KEY CODE FUM
CEI EN 61508-6 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
MIL-C-28741 Revision A:1972 CONTROL MONITOR, C-843O/UPX
MIL-A-81917 Base Document:1973 AIRCRAFT FIRING CIRCUIT TEST SET AN/AWM-54
MIL-M-28787-365 Revision A:1994 MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE MODULE, KEY CODE DGP
MIL O 38338 : C (1) OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR
16/30335990 DC : 0 BS ISO 26262-11 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 11: GUIDELINE ON APPLICATION OF ISO 26262 TO SEMICONDUCTORS
17/30318744 DC : 0 BS ISO 20188 - SPACE SYSTEMS - PRODUCT ASSURANCE REQUIREMENTS FOR COMMERCIAL SATELLITES
MIL-DTL-38449 Revision D:2010 SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING
MIL-T-18232 Revision B:1968 TARGET, AERIAL, POWERED, DESIGN AND CONSTRUCTION OF GENERAL SPECIFICATION FOR
MIL-STD-2067 Base Document:1978 AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR
MIL-M-19160 Revision C:1970 MOTOR GENERATOR, 60 HZ AC TO 400 HZ AC SHIPBOARD SERVICE
08/30156645 DC : DRAFT JULY 2008 BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
MIL-M-28787-366 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC STATIC RANDOM ACCESS MEMORY MODULE, KEY CODE DGG
FAA AC 33.28-2 : 2003 GUIDANCE MATERIAL FOR 14 CFR SECTION 33.28, RECIPROCATING ENGINES, ELECTRICAL AND ELECTRONIC ENGINE CONTROL SYSTEMS
SAE ARP 5873 : 2015 LED PASSENGER READING LIGHT ASSEMBLY
SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
SAE AIR 6258 : 2015 FIBER OPTIC SENSORS FOR AEROSPACE APPLICATIONS
SAE ARP 1070 : 2014 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
S.R. CLC/TR 50506-2:2009 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE
I.S. EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
I.S. EN 62308:2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
IEC 63004:2015 Standard for receiver fixture interface
DIN EN 14044:2014-04 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14043:2014-04 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
BS EN 3567-001:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Technical specification
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
BS EN 3567-003:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Single in-line couplers. Product standard
BS EN ISO 13849-1:2015 Safety of machinery. Safety-related parts of control systems General principles for design
UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 14043:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 16602-30-09:2014 Space product assurance - Availability analysis
EN 16590-2:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
EN 14044:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 3567-003 : 2001 AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 003: SINGLE IN-LINE COUPLERS - PRODUCT STANDARD
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
PD IEC/TS 62647-3:2014 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Performance testing for systems containing lead-free solder and finishes
BS IEC 61586:1997 Estimation of the reliability of electrical connectors
BS IEC 63004:2015 Standard for receiver fixture interface
MIL-S-48426 Revision A:1982 SERVO ELECTRONICS, 10548193
MIL-T-81831 Base Document:1971 TEST SET, ALTIMETER SET AN/APM-347
EIA 933 : 2015 REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN
MIL-C-23952 Revision C:1992 CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM
MIL-M-28787-368 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC DYNAMIC RAM CONTROLLER MODULE, KEY CODE FER
MIL-C-24040 Revision B:1993 COMPUTER INDICATOR (SCALER) RADIAC, CP 792()/UD
EIA STD 4899 : 2017-05 REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN
MIL-F-24701 Base Document:1988 FLOWMETER, LIQUID, ULTRASONIC, NON-INTRUSIVE
MIL-M-28787-359 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC FLIP/FLOP, D TYPE MODULE, KEY CODE KLR
IEEE 650-2006 IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations
MIL-DTL-15303 Revision R:2016 AUDIBLE SIGNALS: ALARMS, BELLS, BUZZERS, HORNS, AND SIRENS, ELECTRONIC, SHIPBOARD
GEIA STD 0005-3 : 2013 PERFORMANCE TESTING FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC INTERCONNECTS CONTAINING PB-FREE SOLDER AND FINISHES
MIL-T-49388 Revision A:1983 TRAY ASSEMBLY, BATTERY CHARGING MX-10154
SAE ARP 6461 : 2013 GUIDELINES FOR IMPLEMENTATION OF STRUCTURAL HEALTH MONITORING ON FIXED WING AIRCRAFT
SAE ARP 6253 : 2017 LEDS AND AIRCRAFT APPLICATIONS
MIL-M-28787-352 Base Document:1989 MODULES, DIGITAL, STANDARD ELECTRONIC 68000 CONTROL/MAINTENANCE MODULE, KEY CODE ADP
13/30280048 DC : 0 BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
MIL-C-24219 Revision A:1970 COUPLER, ANTENNA, AN/SRA-33, FOUR CHANNEL, AUTOMATICALLY TUNED
MIL-S-24186 Revision B:1986 SAMPLER, AIR PARTICLE, HD-732/UD
DOD-L-24681 Base Document:1987 LOUDSPEAKER, CONTROL OF VOLUME, AUTOMATIC (METRIC)
SAE ARP 926 : 2018 FAULT/FAILURE ANALYSIS PROCEDURE
MIL-P-49090 Revision D:1992 POWER SUPPLY 25 MILLIMETER, MICROCHANNEL INVERTER
ISA TR84.00.02-1 : 2002 SAFETY INSTRUMENTED FUNCTIONS (SIF) - SAFETY INTEGRITY LEVEL (SIL) EVALUATION TECHNIQUES - PART 1: INTRODUCTION
DD IEC PAS 62647-3 : DRAFT SEP 2011 PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE AND DEFENCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER - PART 3: PERFORMANCE TESTING FOR SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES
PD ISO/TS 15998-2:2012 Earth-moving machinery. Machine control systems (MCS) using electronic components Use and application of ISO 15998
14/30298031 DC : 0 BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
17/30325424 DC : 0 BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
MIL-P-28739 Base Document:1970 PEDESTAL GROUP, ANTENNA, FOR IFF ANTENNAS AN/UPA-57
MIL-P-24587 Base Document:1979 POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD)
MIL-HDBK-246 Revision A:1982 PROGRAM MANAGERS GUIDE FOR THE STANDARD ELECTRONIC MODULES PROGRAM
MIL-I-16103 Revision F:1983 INDICATOR, PHASE SEQUENCE, SWITCHBOARD & PANEL
MIL-M-28787-393 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE, BUS MODULE, KEY CODE AMJ
MIL-M-28787-358 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC DMA SUPPORT MODULE, KEY CODE FUN
MIL-HDBK-845 Base Document:1992 STANDARD POWER SUPPLY APPLICATIONS HANDBOOK
DIN VDE 0661 : 1988 PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA
MIL-M-28787-346 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC INTERRUPT CONTROL UNIT MODULE, KEY CODE SQY
MIL-M-28787-335 Base Document:1990 MODULES, DIGITAL, STANDARD ELECTRONIC DIRECT MEMORY ACCESS MODULE, KEY CODE NBP
MIL-STD-2173 Base Document:1986 RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT
MIL C 7115 : F CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-M-24791-1 Base Document:1995 MODULE, FIBER OPTIC, TRANSMITTER, DIGITAL, 160 MBD, ASSOCIATED DETAIL SPECIFICATION FOR
DOD-C-85050 Base Document:1982 CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-P-24764 Base Document:1991 POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR
SAE AS 6349 : 2016 MINIMUM PERFORMANCE STANDARD (MPS) FOR AN AIRBORNE AC TO AC CONVERTER
MIL-M-28787-371 Base Document:1991 MODULES, ANALOG, STANDARD ELECTRONIC INTERFACE, DISCRETE MODULE, KEY CODE TAV
RE.AERO 70305 : A2000 GUIDE FOR RELIABILITY CONTROL
MIL-P-23141 Revision D:1968 PLOTTING TABLE, ANTI SUBMARINE AND DEAD RECKONING (NAVAL SHIPBOARD)
MIL-P-85576 Revision B:1987 POWER SUPPLY PP-2581C/A
MIL-M-28787-355 Base Document:1990 MODULES, STANDARD ELECTRONIC PROGRAMMABLE READ ONLY MEMORY MODULE
CLC/TR 50506-1:2007 Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance
FAA AC 20-157 : 2007 HOW TO PREPARE RELIABILITY ASSESSMENT PLANS FOR AIRCRAFT SYSTEMS AND EQUIPMENT
SAE ARP 1070E : 2019 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
PREN 3567-003 : 200P1 AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - SINGLE IN-LINE COUPLERS - PRODUCT STANDARD
S.R. CLC/TR 50506-1:2007 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE
SAE ARP 5415 : 2008 USER'S MANUAL FOR CERTIFICATION OF AIRCRAFT ELECTRICAL/ELECTRONIC SYSTEMS FOR THE INDIRECT EFFECTS OF LIGHTNING
AEDP-6 : 2014 NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE
I.S. EN 16602-30-09:2014 SPACE PRODUCT ASSURANCE - AVAILABILITY ANALYSIS
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
EIA RB4 : A1969 RELIABILITY QUANTIFICATION
IEC 61204:1993+AMD1:2001 CSV Low-voltage power supply devices, d.c. output - Performance characteristics
DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
BS EN 14043:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
IEC 62308:2006 Equipment reliability - Reliability assessment methods
BS EN 3567-004:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Double in-line couplers. Product standard
BS EN 60825-2 : 2004 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
IEC TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
EN 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
EN 61204:1995/A1:2001 LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001)

MIL R 22097 : G RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR
MIL-R-10509 Revision J:2007 RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR
MIL C 39003 : H CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL R 39007 : G (3) SUPP 1A RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR
MIL C 39018 : C CAPACITORS, FIXED, ELECTROLYTIC (ALUM. OXIDE), ESTABLISHED RELIABILITY AND NON- ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL F 15160 : G FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR
MIL R 83726 : B RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR)O.1 TO 500 SECONDS
MIL C 15305 : E COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL-STD-883 Revision K:2016 TEST METHOD STANDARD - MICROCIRCUITS
MIL C 39022 : E CAPACITOR, FIXED, METALLIZED PAPER, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC DIRECT AND ALTERNATING CURRENT, HERMETICALLY SEALED IN METAL CASE) ESTABLISHED RELIABILITY, GEN. SPEC. FOR
MIL-R-39008 Revision C:1990 RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL R 22684 : D RESISTOR, FIXED, FILM, INSULATED, GENERAL SPECIFICATION FOR
MIL C 55302 : E CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE
MIL C 28748 : B CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR
MIL C 23269 : E CAPACITORS, FIXED, GLASS DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-STD-975 Revision M:1994 NASA STANDARD (EEE) PARTS LIST
MIL S 83734 : F SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR
MIL T 21038 : D TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR
MIL R 39005 : D RESISTOR, FIXED, WIREWOUND, (ACCURATE), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-F-18327 Revision F:2008 FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR
MIL S 8805 : D SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR
W-F-1814 Revision D:2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
MIL-STD-1547 Revision B:1992 ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES
MIL-R-11 Revision G:1994 RESISTORS, FIXED, COMPOSITION (INSULATED), GENERAL SPECIFICATION FOR
MIL R 83725 : B RELAY, VACUUM, GENERAL SPECIFICATION FOR
MIL-C-11272 Revision E:2008 CAPACITORS, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR
MIL C 83383 : C CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR
MIL R 5757 : K RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
MIL C 14157 : LATEST CAPACITOR, FIXED, PAPER (PAPER PLASTIC) OR PLASTIC DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL R 39009 : C (3) SUPP 1 RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED) ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL C 39019 : C CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR
MIL C 24308 : C CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
W-F-1726 Base Document:1973
MIL C 81 : C CAPACITORS VARIABLE CERAMIC DIELECTRIC GENERAL SPECIFICATION FOR
MIL R 93 : F RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR
MIL-M-38510 Revision J:1991 MICROCIRCUITS, SPECIFICATION FOR
MIL-R-11804 Revision E:1965 RESISTOR, FIXED, FILM (POWER TYPE), GENERAL SPECIFICATION FOR
W-C-375 Revision E:2013 CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE
MIL C 3650 : A CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC
MIL-C-12889 Revision A:1957 CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR
MIL-R-19523 Revision B:1990 RELAY, CONTROL, NAVAL SHIPBOARD
MIL R 55182 : F RESISTORS, FIXED, FILM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL C 83723 : E CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR
MIL C 39012 : C GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS
MIL C 14409 : D CAPACITOR, VARIABLE (PISTON TYPE, TUBULAR TRIMMER), GENERAL SPECIFICATION FOR
MIL T 27 : E TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) GENERAL SPECIFICATION FOR
MIL C 55514 : C CAPACITOR, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC AC, IN NONMETAL CASES, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL C 38999 : J CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS
MIL C 83733 : C CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL R 39015 : C (3) RESISTOR, VARIABLE, WIRE WOUND (LEAD SCREW ACTUATED), ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL R 39035 : C (2) SUPP 1 RESISTOR, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE) ESTABLISHED RELIABILITY
MIL C 19978 : F CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR
MIL C 25516 : D CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
MIL R 28750 : C SUPP 1 RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING
MIL R 39017 : E (5) SUPP 1 RESISTOR, FIXED, FILM (INSULATED) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL C 3098 : G CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR
MIL F 5372 : D FUSE, CURRENT LIMITER TYPE, AIRCRAFT
MIL F 15733 : G FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE
MIL C 5 : G CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR
MIL-C-10950 Revision C:1968 CAPACITOR, FIXED, MICA DIELECTRIC, BUTTON STYLE, GENERAL SPECIFICATION FOR
MIL R 23285 : B RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR
MIL C 3643 : A CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR
MIL M 10304 : E METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR
MIL R 39016 : E RELAY, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-C-81511 Revision F:1992 CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT ENVIRONMENT RESISTING, AND ACCESSORIES GENERAL SPECIFICATION FOR
MIL S 3950 : F SWITCH, TOGGLE ENVIRONMENTALLY SEALED, GENERAL SPECIFICATION FOR
MIL R 6106 : J RELAYS, ELECTROMAGNETIC [INCLUDING ESTABLISHED RELIABILITY [ER] TYPES
MIL S 19500 : J SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL C 83421 : B CAPACITOR, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC) HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-V-95 Revision B:1989 VIBRATOR, INTERRUPTER AND SELF RECTIFYING
MIL C 39010 : D COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL C 20 : H CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY & NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL C 3767 : LATEST CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL (POWER, BLADED TYPE),
MIL C 39006 : E CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL C 3655 : C CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR
MIL-C-18312 Revision G:2013 CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
MIL C 39014 : E CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL C 5015 : G CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR
MIL C 3607 : A CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR
MIL C 26482 : G CONNECTOR, ELECTRICAL (CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MIL F 23419 : E FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR
MIL R 12934 : H NOTICE 1 RESISTOR, VARIABLE, WIREWOUND, PRECISION GENERAL SPECIFICATION FOR
MIL C 39001 : B CAPACITOR, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR..
MIL L 6363 : G LAMP, INCANDESCENT, AVIATION SERVICE GENERAL SPECIFICATION FOR
MIL-C-11015 Revision F:2008 CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR
MIL R 39023 : A RESISTOR, VARIABLE, NON WIRE WOUND, PRECISION GENERAL SPECIFICATION FOR
MIL P 55110 : LATEST PRINTED WIRING BOARD, RIGID GENERAL SPECIFICATION FOR
MIL-C-23183 Revision B:1972 CAPACITORS, FIXER OR VARIABLE, VACUUM OR GAS DIELECTRIC, GENERAL SPECIFICATION FOR
MIL C 11693 : C CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20
MIL R 83401 : F (4) SUPP 1A RESISTOR NETWORKS, FIXED, FILM, GENERAL SPECIFICATION FOR
MIL R 39002 : 0 RESISTOR, VARIABLE, WIREWOUND, SEMI PRECISION, GENERAL SPECIFICATION FOR
MIL C 62 : F CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
MIL S 3786 : F SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04
MIL C 21097 : E CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR
MIL S 22710 : E SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR
MIL-T-55631 Base Document:1972 TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR
MIL R 19648 : C RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR
MIL C 55629 : B CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES)
MIL R 94 : E RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR
MIL-C-92 Revision B:1969 CAPACITORS, VARIABLE, AIR DIELECTRIC (TRIMMER) GENERAL SPECIFICATION FOR
MIL C 3965 : F CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR

View more information
£16.70
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.