MIL-DTL-22641 Revision G:2016
Current
The latest, up-to-date edition.
Adapters, Coaxial to Waveguide, General Specification for
English
01-12-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for adapters that connect series N connectors to waveguides, 5/8-inch coaxial lines to waveguides, and 7/8-inch coaxial lines to waveguides, series TNC connectors to waveguides, and series SMA connectors to waveguides, for general application by the armed services.
| DevelopmentNote |
Supersedes MIL A 22641 (C). (02/2000)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for adapters that connect series N connectors to waveguides, 5/8-inch coaxial lines to waveguides, and 7/8-inch coaxial lines to waveguides, series TNC connectors to waveguides, and series SMA connectors to waveguides, for general application by the armed services (see 1.2, 1.3, 6.1, and 6.5).
| MIL-DTL-22641-20 Revision D:2010 | Adapters, Coaxial to Waveguide (Series SMA to Waveguide - Class 5) |
| MIL-DTL-22641-16 Revision H:2010 | Adapters, Coaxial to Waveguide (Series N to Waveguide - Class 1) |
| MIL-A-22641-17 Revision B:2011 | Adapters, Coaxial to Waveguide (Class III - .875 Inch), Types UG-405/U, UG-522/U, UG-1622/U, and UG-1663/U (No S/S Document) |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-A-22641-22 Revision A:2013 | Adapters, Coaxial to Waveguide (Double Ridge) (Bandwidth Ratio 2.4:1) (Series SMA to Waveguide - Class 5) (No S/S Document) |
| MIL-A-22641-18 Revision A:2011 | Adapters, Coaxial to Waveguide (Class III - .625 Inch), Types UG-403/U, UG-404/U, UG-445/U, UG-520/U, UG-521/U, UG-523/U, UG-1647/U, UG-1648/U, UG-1649/U, UG-1650/U, UG-1651/U and UG-1652/U (No S/S Document) |
| MIL-A-22641-19 Revision A:2013 | Adapter, Coaxial to Waveguide (TNC to Waveguide - Class 4) |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-PRF-39012 Revision F:2014 | Connectors, Coaxial, Radio Frequency, General Specification for |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| QQ-B-654 Revision A:1980 | BRAZING ALLOYS, SILVER |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| MIL-DTL-3922 Revision E:2016 | Flanges, Waveguide, General Purpose, General Specification for |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-201 Base Document:2015 | Method 201, Vibration |
| MIL-DTL-15090 Revision E:2010 | Enamel, Equipment, Light Gray (Navy Formula No.111) |
| MIL-DTL-85 Revision K:2011 | Waveguides, Rigid, Rectangular General Specification for |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.