• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

FED-STD-H28 Revision A:1994

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Screw-Thread Standards for Federal Services

Available format(s)

PDF

Superseded date

23-04-2021

Published date

28-12-1994

Basic dimensional requirements for assembly, interchangeability, tensile, shear and fatigue strength and installation and removal torque of threaded parts.

This standard includes the basic screw thread dimensional and acceptability requirements for common screw thread forms and applications. Design and use information are also provided when necessary. Specific requirements for particular screw threads, gages, etc., are covered by detailed standard sections.

DevelopmentNote
A Notice 1 - Notice of Validation (09/2001)
DocumentType
Standard
Pages
12
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy

MIL-L-81745 Revision B:1985 LAUNCHER CONTAINER, (A) SIZE SONOBUOY LAU-126/A
SAE AS 85188 : 2013 RIVETER, POWER, PNEUMATIC-HYDRAULIC BLIND RIVET INSTALLATION
MIL-S-52256 Revision C:1990 SURVEYING INSTRUMENT; AZIMUTH GYRO, LIGHTWEIGHT
MIL-DTL-642-11 Revision C:2013 PLUGS, TELEPHONE (TYPE PJ-636)
MIL-P-80249 Revision A:1982 PLATING UNIT, SELECTIVE (BRUSH) PORTABLE
MIL-DTL-83413-5 Revision C:2013 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE
MIL-P-0081653 Revision C:1987 POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR
MIL-DTL-11732 Revision F:2010 CYLINDER, COMPRESSED GAS: CHLORINE; DOT 3A480 OR DOT 3AA480, GENERAL SPECIFICATION FOR
MS24699 Revision B:2005 Shaft, Connector, Rack and Panel, Miniature
WW-C-624 Revision E:1983 COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION)
MIL-DTL-28788 Revision C:2010 SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR
MIL V 1189 : D VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE]
MIL A 18455 : C ARGON, TECHNICAL
MIL-C-52972 Revision A:1987 COMPRESSOR UNIT, 5 CFM, 3200 PSI, DIESEL ENGINE DRIVEN, DIVING AIR
MIL-R-83372 Base Document:1972 RELAY, ELECTROMAGNETIC, HYBRID, EMI SUPPRESSED, GENERAL SPECIFICATION FOR
MIL-I-62676 Base Document:1992 INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE (METRIC)
MIL-DTL-52404 Revision C:2010 CONNECTIONS: HOSE, FIRE AND WATER
MS39210 Revision K:2018 NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE
MIL-C-1173 Revision E:1976 CART, GENERAL HAULING
MIL-P-24608 Revision A:1987 PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS
MIL-B-14154 Revision E:1992 BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE
MIL-B-12582 Revision C:1984 BLOCK, TACKLE, HAUL BACK, FOR WIRE ROPE
MIL-L-80277 Base Document:1989 LATHES, PRECISION, TOOLROOM, VARIABLE SPEED, 11-INCH THROUGH 13-INCH
MIL C 39010 : D COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
TIA 5150000 : 1986(R2002) GENERIC SPECIFICATION FOR OPTICAL FIBER AND CABLE SPLICES
MIL C 27599 : B CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR
GG-G-91 Revision D:1972 GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE
MIL-E-16400 Revision H:1987 ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
MIL-J-26149 Revision E:1988 Jack, Hydraulic, Aircraft Maintenance, General Specification for
GGG-W-290 Revision C:1985 WHEELS, ABRASIVE, SNAGGING
DOD STD 2003/2 : 0 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIP AND SUBMARINES (EQUIPMENT)
MIL-STD-1580 Revision B:2003 DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS
MIL-V-24384 Revision B:1988 Valve, Pressure Regulating, for Low Pressure Air or Nitrogen Systems
MIL C 83513 : C CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MS39206 Revision G:2012 ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END
13/30285935 DC : 0 BS EN 3545-006 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 006: MALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FIXED HOUSING (RECEPTACLE) - PRODUCT STANDARD
MIL-DTL-55235 Revision A:2003 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-T-14132 Revision G:1991 THEODOLITE, SURVEYING, DIRECTION, SECOND ORDER
GGG-V-790 Revision E:1992 VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE
MIL-G-17713 Revision D:1988 GAGES, LIQUID LEVEL MEASURING, TANK
MIL-PRF-19207 Revision G:2013 Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for
MIL-DTL-45916 Revision C:2014 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
MIL-L-53106 Base Document:1990 LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED
MIL-DTL-13623 Revision E:2010 SWITCH, ROTARY: 28 VOLT DC
A-A-55603 Revision A:2012 Clamp, Guy (Pole Line)
GGG-S-282 Revision E:1983 SHEARS, METAL CUTTING, ELECTRIC (PORTABLE)
MIL-T-17585 Revision C:1983 THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE
BB-N-411 Revision C:1973 NITROGEN, TECHNICAL
MIL-R-52939 Base Document:1977 REGULATOR, CURRENT, RUNWAY LIGHTING, 120 VOLT, 2 1/4 KW, AC
MIL R 23285 : B RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR
MIL-DTL-3655 Revision D:2004 Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for
MIL A 23798 : C AIR CONDITIONER, FAN-COIL ASSEMBLY
MIL-V-82466 Base Document:1967 VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM
MIL-I-17244 Revision E:1971 INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL)
MS39199 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
MIL-C-83515 Revision A:1985 CONNECTOR, TELECOMMUNICATION, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MIL D 9129 : D DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR
MIL-H-53096 Base Document:1990 HOSES & HOSE ASSEMBLIES, ELASTOMER, RUBBER, LIQUID FUEL, NON-COLLAPSIBLE, LOW TEMPERATURE
MIL-M-80141 Revision C:1987 METALLIZING OUTFITS, POWDER-GUNS AND ACCESSORIES
MIL-H-21367 Revision E:1985 HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES
MIL-C-12889 Revision A:1957 CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR
MIL M 28837 : 0 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL-DTL-3922 Revision E:2016 FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR
GGG-J-1564 Revision C:1992 JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE
MIL C 3655 : C CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR
MIL-C-52980 Revision B:1988 COMPRESSOR, RECIPROCATING AND ROTARY, GASOLINE ENGINE DRIVEN, AIR
MIL S 15743 : C SWITCH, ROTARY, ENCLOSED
MIL-T-24270 Revision B:1983 THERMOWELLS FOR THERMOMETERS AND ELECTRICAL TEMPERATURE SENSORS GENERAL SPECIFICATION FOR
MIL-DTL-32546 Base Document:2016 Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for
MIL-C-555 Revision L:1991 COMPRESSOR, AIR RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
MIL-PRF-83383 Revision F:2017 Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For
A-A-55469 Revision B:2015 CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR
SAE AS 5590 : 2013 CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR
MIL H 52471 : D HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR
XP PREN 3660-001 : 1994 XP AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
GG-R-550 Revision B:1981 ROD, STADIA, FOLDING, WITH CASE
MIL-DTL-17060 Revision G:2009 MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
MIL-B-28873 Base Document:1983 BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
XP PREN 3660-005 : 1994 XP AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 005: CABLE OUTLET, TYPE A, 005, 90 DEGREE, UNSEALED, WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD
MIL-B-28617 Revision C:1977 BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE)
MIL-N-25027-1 Revision A:1995 NUT, SELF-LOCKING, HEAVY HEX, (NON-METALLIC INSERT) 250 & 450 DEG F, UNJC-3B, 1/4 THROUGH 2-1/2 INCH NOMINAL DIAMETERS, NICKEL-COPPER ALLOY
MIL-PRF-24236 Revision D:2006 SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR
XP PREN 3660-004 : 1994 XP AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 004: CABLE OUTLET, TYPE A, 004, STRAIGHT, UNSEALED, WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD
MS17185 Revision A:2006 CLAMP (SYNCHRO)
MIL C 28840 : A CONNECTOR ELECTRICAL, CIRCULAR THREADED, HIGH DENSITY, HIGH SHOCK SHIPBOARD, CLASS D - GENERAL SPECIFICATION FOR
MIL-DTL-22438 Revision C:2012 PANELS, RECEPTACLE, FOR ELECTRICAL AND ELECTRONICS TEST AND MAINTENANCE TABLE, GENERAL SPECIFICATION FOR
MIL-PRF-39012-5 Revision H:2006 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES N (CABLED), RIGHT ANGLE, PIN CONTACT, CLASS 2)
MIL S 19500/308 : B SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER, FAST RECOVERY TX AND NON TX TYPES 1N3909, 1N3910, 1N3911, 1N3912, 1N3913, 1N3909R, 1N3910R, 1N3911R, 1N3912R, AND 1N3912R
MIL-T-52823 Revision A:1983 TARGET SET, SURVEYING
MIL-DTL-17896 Revision E:2008 BAROMETER, ANEROID
MIL-S-45933 Base Document:1971 STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR
GGG-C-105 Revision C:1987 CALIPER, MICROMETER (INSIDE, OUTSIDE, TUBE) AND GAGE, DEPTH, MICROMETER
MIL-S-15573 Revision A:1952 STRAINER, SEDIMENT, PIPELINE (FOR GASOLINE SERVICE)
MIL-PRF-39012-2 Revision H:2006 CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), FLANGE MOUNTED, SOCKET CONTACT, CLASS 2)
MIL-DTL-12285 Revision G:2016 SWITCHES, THERMOSTATIC
MIL S 9395 : F SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR
MIL-B-21442 Revision B:1963 BATTERY, STORAGE, NICKEL-CADMIUM
MIL-DTL-16356 Revision E:2013 GAUGES, DIRECT READING, OBLONG GLASS
GGG-S-75 Base Document:1955 SAW SET, HAND
GGG-P-781 Revision E:1996 PULLER, MECHANICAL PULLER ATTACHMENT, MECHANICAL, AND PULLER SET, MECHANICAL
MIL-PRF-23145 Revision C:2018 Inflation Assemblies, Life Preserver
MIL-DTL-5815 Revision H:2012 ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR
MIL-DTL-22992 Revision H:2015 Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
MIL-DTL-52649 Revision C:2009 Engine Cold Starting Aids, Ether Fuel Primers
MIL-PRF-25670 Revision B:1997 EARPHONE ELEMENTS, GENERAL SPECIFICATION FOR
MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
MIL-DTL-21604 Revision G:2017 Switches, Rotary, Multipole and Selector, General Specification for
MIL-P-45051 Revision D:1985 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
MIL-S-64052 Base Document:1988 SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED
MIL-P-87988 Base Document:1989 PIN-RIVET, THREADED WITH HEX SOCKET
MIL-D-82687 Base Document:1980 DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O
MIL F 85406 : 0 FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B
SAE AS 1338 : 2014 AEROSPACE METRIC 60 DEGREES SCREW THREAD PROFILE AND TOLERANCE CLASSES
MIL-T-55164 Revision C:1987 TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR
MIL-P-80186 Revision B:1991 POSITIONERS, WELDING, ROTATING TABLE, CANTILEVER ARM DESIGN
MIL-PRF-32236 Base Document:2007 GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG)
MIL-DTL-28791 Revision D:2016 ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL S 19500/297 : B SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER TX AND NON TX TYPES 1N1184, 1N1186, 1N1188, 1N1190, 1N3766, 1N3768, 1N1184R, 1N1186R, 1N1188R, 1N1190R, 1N3766R, AND 1N3768R
RR-C-550 Revision D:1991 CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT
MIL-PRF-39012-138 Revision A:2013 CONNECTOR, RECEPTACLE, ELECTRICAL, SERIES SSMA, SOCKET CONTACT, FOR SEMIRIGID CABLE
MIL A 27434 : A ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR
MIL-PRF-39012-35 Revision H:2011 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), PIN CONTACT, CLASS 2)
MIL I 18369 : C INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS
MIL C 83729 : A CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR
MIL-PRF-39012-71 Revision B:2011 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (UNCABLED, MALE, JAMNUT MOUNTED, CLASS 2)
MIL-B-45989 Revision C:1985 BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE
MIL C 62 : F CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
MIL-PRF-39012-20 Revision H:2006 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL R 22 : C RESISTOR VARIABLE (WIREWOUND POWER TYPE) GENERAL SPECIFICATION FOR
MIL-A-22891 Base Document:1962 AMPLIFIER, ERROR LIGHT, ASSEMBLY
MIL-T-45568 Revision G:1986 TEST SET, TACHOMETER-DWELL
MIL B 5423 : C BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR
GGG-E-950 Revision A:1988 EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND
MIL-T-52993 Base Document:1981 TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE
GGG-S-0075 Revision A:1966 SAW SET, HAND
MIL S 0053085 : A SURVEY INSTRUMENT AUTOMATED, INTEGRATED (AISI)
MIL I 45932 : 0 INSERT, SCREW THREAD, THIN WALL, LOCK IN
MIL-S-80271 Revision A:1992 SHEARING MACHINE, METAL SQUARING MECHANICAL DRIVE
PREN 3218-001 : 200P1 AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION
PREN 3545-001 : 200P4 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION
ASTM A 338 : 1984 : R2009 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650&#176F (345&#176C)
ASTM F 1565 : 2000 : R2013 Standard Specification for Pressure-Reducing Valves for Steam Service
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
SAE AS 5944 : 1999 SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR
ASTM A 338 : 1984 : R2014 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
ASTM F 1755M : 1996 Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
ASTM F 1755M : 1996 : R2007 Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
ASTM A 338 : 1984 : R2004 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650&#176F (345&#176C)
BS EN 3545-005:2014 Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Female coding and attachment System for mounting on free housing (plug). Product standard
BS EN 2997-10:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Protective cover for plug. Product standard
SAE AS 95234A : 2020 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
BS EN 3545-001:2008 Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification
MIL-DTL-83731 Revision E:2016 SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR
A-A-59494 Revision B:2016 WHEELS AND HUBS FOR INDUSTRIAL PNEUMATIC TIRES
MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL-B-87114 Revision A:1978 BOLTS, RECESS DRIVE, GENERAL SPECIFICATION FOR
MIL-C-29169 Revision A:1983 CONDUIT, AND CONDUIT FITTINGS, METAL, RIGID POLYVINYL CHLORIDE [PVC] COATED
MIL-DTL-24151 Revision B:2016 DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
MIL C 55629 : B CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES)
MIL-B-44037 Revision A:1986 BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED
MIL-DTL-3607 Revision C:2009 Connectors, Coaxial, Radiofrequency, Series for Pulse, General Specification for
MIL-DTL-28778 Revision A:2005 TRANSFORMER, POWER, STEPUP, 3 PHASE
MIL-E-24269 Revision B:1988 EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE
MS27291 Revision H:2015 SUPPORT, CABLE, ELECTRICAL CONNECTOR, FOR MIL-DTL-26500
MIL-C-10933 Revision E:1985 CHILLED WATER UNITS, BAKERY
MIL-DTL-22641 Revision G:2016 ADAPTERS, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR
MIL-C-29184 Revision B:1991 Cable Assemblies, Power, Electrical, for Portable Panelboards, General Specification for
MIL-P-52327 Revision C:1990 PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING
MS3186 Revision G:2011 CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON
MIL-C-13874 Revision K:1992 COMPRESSORS, RECIPROCATING AND ROTARY, AIR, ELECTRIC MOTOR DRIVEN
MIL-PRF-31031 Revision C:2014 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR
MIL P 29183 : B PANELBOARD, POWER DISTRIBUTION PORTABLE WEATHERPROOF, GENERAL SPECIFICATION FOR
MIL-PRF-39012 Revision F:2014 CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL PRF 83513 : D CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MIL-PRF-22710 Revision H:2013 Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for
MIL-G-19826 Revision F:1984 GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED)
MS51115 Revision B:2008 Coil, Ignition-24 Volt DC (Without Internal Ballast) (No S/S Document)
MIL-DTL-15743 Revision F:2017 SWITCHES, ROTARY, ENCLOSED
MIL-DTL-7790 Revision A:2002 RESISTOR, THERMOCOUPLE LEAD SPOOL
OO-L-2880 Base Document:1997 LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR
W-G-663 Revision B:1970 GRINDER, ELECTRIC, PORTABLE
W-S-564 Revision C:1991 SOLDERING GUNS, ELECTRIC
MIL V 24630 : 0 VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
W-S-570 Revision B:1989 SOLDERING IRON ELECTRIC
MIL-P-53065 Base Document:1986 PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD
W-J-800 Revision F:1992 JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED)
W-S-896 Revision G:2014 SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION)
MIL S 8805 : D SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR
MIL S 22885 : E SWITCH, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR
MIL S 83731 : A SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR
MIL-R-13877 Revision D:1987 REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION
MS51114 Revision D:2008 Coil, Ignition-24 Volt DC (With Internal Ballast) (No S/S Document)
W-F-406 Revision E:1993 FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-T-81364 Base Document:1966 T-BOLT, 180,000 PSI TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS
MIL C 38159 : B CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR
MIL-P-80279 Base Document:1991 PUNCHING, SHEARING, NOTCHING, AND COPING MACHINE, METAL, HYDRAULIC DRIVEN, FOUR STATION TYPE
MIL-STD-107 Revision J:2001 PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE
MIL H 51191 : D NOTICE 1 HEATER, AIR, ELECTRIC, FILTER UNIT, M3
MIL-P-80280 Base Document:1991 PUNCHING, ANGLE AND BAR SHEARING MACHINE, METAL, HYDRAULICALLY DRIVEN, THREE STATION TYPE
MIL-DTL-29183 Revision C:2003 PANELBOARDS, POWER DISTRIBUTION, PORTABLE, WEATHERPROOF, GENERAL SPECIFICATION FOR
MIL-STD-1251 Revision A:1981 SCREW AND BOLTS PREFERRED FOR DESIGN, LISTING OF
MIL-DTL-24652 Revision A:2016 Extinguisher, Fire, Aqueous Film Forming Foam (AFFF), 2.5-Gallon
MIL-STD-2003-2 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT)
MIL-PRF-22885 Revision J:2016 Switches, Push Button, Illuminated, General Specification for
MIL-DTL-28827 Revision C:2011 SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
GGG-E-2814 Base Document:1993 ETCHERS, ELECTRIC, PORTABLE
MIL-N-52110 Revision F:1982 NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF
MIL-PRF-8805 Revision G:2016 SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR
MIL-DTL-32360 Base Document:2010 STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL
MIL S 3786 : F SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04
MIL-DTL-3950 Revision K:2016 Switches, Toggle, Environmentally Sealed, General Specification for
MIL-DTL-9395 Revision K:2016 Switches, Pressure (Absolute, Gage and Differential) General Specification for
MIL-PRF-27 Revision G:2014 TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR
ANEP-80 : 2009 NATO SONOBUOY INTEROPERABILITY SPECIFICATION - COMMON SPECIFICATIONS
MIL-DTL-28748-17 Revision B:2016 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR
MIL-DTL-16225 Revision C:2010 LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546()
MIL-DTL-6749 Revision B:2008 RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, AIRCRAFT POWER
MIL-PRF-55629 Revision E:2011 CIRCUIT BREAKERS, MAGNETIC, UNSEALED OR PANEL SEAL, TRIP-FREE, GENERAL SPECIFICATION FOR
CC-G-2745 Base Document:1984 GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED)
GG-G-76 Revision E:1980 GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES)
MIL-S-82496 Revision A:1977 SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING
MIL-DTL-12606 Revision E:2000 LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02
MIL-D-23615 Revision C:1993 DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES
MIL-DTL-12632 Revision E:2016 LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR
MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
MIL-DTL-24646 Revision C:2015 FUSE BOXES, GENERAL SPECIFICATION FOR
MIL-R-85880 Base Document:1988 ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
MIL-DTL-10911 Revision E:2012 LOUDSPEAKERS, PERMANENT MAGNET, (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-INCH DIAMETER CONES), GENERAL SPECIFICATION FOR
W-D-661 Revision E:1995 DRILL, ELECTRIC, PORTABLE, (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL
MIL-DTL-2726 Revision C:2006 Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for
MIL-DTL-24317 Revision B:2010 SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
MIL-B-23990 Revision C:1984 BLOCKS, TACKLE, WIRE ROPE, EXTRA HEAVY DUTY
MIL S 28827 : A SWITCH, THERMOSTATIC, (VOLATILE LIQUID) HERMETICALLY SEALED GENERAL SPECIFICATION FOR
MIL-F-18327 Revision F:2008 FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR
SAE AS 95234 : 2014 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
MS24700 Revision B:2005 Bushing, Fixed, Connector, Rack and Panel, Miniature
A-A-51149 Revision A:1991 CHUCKS, INDEPENDENT TYPE, FOUR-JAW
MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
MIL-DTL-20064 Revision F:2014 VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS
IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
MIL-A-28737 Revision A:1977 ANTENNA, IFF, AS-2188(),(3 METERS) (1O FEET)), AS-2189 (1.8 METERS (6 FEET))
MIL-C-0052980 Revision C:1994 COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN
MIL-H-4607 Revision E:1987 HEATER, ENGINE AND SHELTER, GROUND
MIL-B-52734 Revision C:1991 BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY
DSCC 99003 : B SEMICONDUCTOR DEVICE, THYRISTOR, REVERSE BLOCKING, SILICON, TYPES 2N1792 AND 2N1910 FAMILIES
MIL-T-52114 Revision G:1991 THEODOLITE, SURVEYING, DIRECTIONAL, THIRD ORDER
MIL-DTL-39000 Revision C:2013 Flanges, Waveguide, Ridge, General Specification for
MIL-B-53107 Base Document:1990 BRIDGE, LIGHT ASSAULT 23 METER SPAN
MIL-DTL-16556 Revision F:2017 Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use )
MIL-T-52942 Revision C:1996 TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION
MIL-G-24745 Base Document:1990 GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD, 600 POUNDS PER SQUARE INCH STEAM SERVICE
MIL-D-12491 Revision E:1989 DEGREASER, SOLVENT, TANK IMMERSION TYPE
MIL A 28875 : 0 AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR
MIL-P-85710 Base Document:1986 PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR
BS IEC 63004:2015 Standard for receiver fixture interface
F-V-2906 Base Document:1997 VALVES, AIR VENTING, STEAM
DOD-P-24639 Base Document:1984 PROPELLER, FIXED PITCH, SHIP (METRIC)
MIL C 83733 : C CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL M 17060 : F MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
MIL C 00555 : K COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
MIL-C-13899 Revision F:1985 COMPRESSOR UNIT, ROTARY: AIR, WHEELBARROW-FRAME-MOUNTED, TWO PNEUMATIC TIRES, GASOLINE-ENGINE-DRIVEN, 60-CFM, 6.5-PSIG
MIL-DTL-55023 Revision D:2011 MANOMETERS, U-TUBE AND CURVED TUBE
MIL F 16377 : G FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2
MIL E 17807 : C ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD)
MIL-T-55155 Revision C:1993 TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR
MIL-DTL-13625 Revision G:2017 SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
MIL-I-45934 Base Document:1971 INSERT, SCREW THREAD, KEYRING LOCKED, SELF LOCKING AND NON SELF LOCKING, 125, 180, AND 220 KSI FTU: GENERAL SPECIFICATION FOR
MIL-C-4109 Revision F:1986 COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT
MS39232 Revision C:2015 REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS)
MIL-PRF-31031-43 Base Document:2008 Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Right Angle, Pin Contact, for Semirigid Cable
SAE AS 29600 : 2017 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR
MIL-DTL-16377 Revision J:2014 Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for
MIL-C-24217 Revision A:1984 CONNECTOR, ELECTRICAL, DEEP SUBMERGENCE, SUBMARINE
MIL-C-85049 Revision A:1990 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
MIL-C-81093 Revision B:1984 CARTRIDGES, EXPLOSIVE BOLT, (FOR TORPEDOES MARK 46 ALL MODS)
MIL-T-17523 Revision D:1976 TURBINE, STEAM, AUXILIARY (AND REDUCTION GEAR) MECHANICAL DRIVE
MIL-B-18966 Revision C:1984 BLOCKING PLANT, CONCRETE
MIL-DTL-25516 Revision F:2004 CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
MIL V 16556 : E VALVE, SOLENOID, THREE-WAY BYPASS (NAVAL SHIPBOARD USE)
MIL-DTL-28837 Revision D:2015 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL-DTL-22442-25 Revision B:1998 ASSEMBLY, AIRCRAFT AUDIO, MOLDED RUBBER CONNECTOR MECHANICAL GAUGES
XP PREN 3545-001 : 1997 XP AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 001: TECHNICAL SPECIFICATION
MIL S 1222 : H STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS
MIL-W-52161 Revision D:1989 WELDING SET, ARC, INERT GAS, SHIELDED: CONSUMABLE WIRE ELECTRODE
MIL-PRF-15733 Revision J:2010 FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR
MIL-DTL-24552 Revision B:2001 TERMINALS AND SEALS, PLUGS AND SWITCH, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR
O-A-445 Revision C:2003 AMMONIA, TECHNICAL
MIL F 28861 : B FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
MIL-P-10360 Revision G:1993 PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER
MIL-PRF-12732 Revision F:2010 HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW
MIL-T-14091 Revision E:1988 TRIPOD, SURVEYING, EXTENSION-LEG-TYPE
MIL R 11767 : F RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT
MIL-M-21039 Revision B:1979 MAGNIFIER, MEASURING TUBE TYPE, SEVEN POWER AR-60( )
MIL-P-52746 Revision C:1994 PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF PRIMING 2 INCH 100 GPM AT 100 FEET TOTAL DYNAMIC HEAD
MIL H 17902 : F HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS
GG-T-355 Revision B:1967 THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM, (METEOROLOGICAL)
GGG-P-151 Revision B Interim Revision:1971 PEAVY; HOOK, CANT; AND CARRIER, TIMBER
MIL-S-81039 Revision A:1968 SWITCH HYDROSTATIC, MARK 110 MOD 0
MIL F 45968 : A FITTINGS, AUTOMOTIVE TUBE, BRASS INVERTED FLARE (WITH STEEL NUT)
GGG-P-00475 Base Document:1964 PLIERS, JEWELLERS
GGG-S-63 Revision C:1976 SAW, CIRCULAR, PORTABLE, PNEUMATIC
MIL C 9177 : B CONNECTOR, AUDIO, AIRBORNE, GENERAL SPECIFICATION FOR
MIL-PRF-39012-76 Revision D:2011 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR MOUNTED, CLASS 2)
MIL-C-83439 Base Document:1974 CAPACITOR, FIXED, FEED THROUGH, ELECTROMAGNETIC INTERFERENCE SUPPRESSION, (AC, OC, AND AC-DC)(HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
MIL-F-19700 Revision A:1987 FASTENERS, SCREW THREADED, AND RELATED ITEMS, NON-MAGNETIC
MIL H 6615 : E HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE
MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
MIL S 19500/304 : C SEMICONDUCTOR DEVICE, DIODE, SILICON, POWER RECTIFIER, FAST RECOVERY TYPES 1N3885, 1N3886, 1N3888, 1N3890, 1N3891, 1N3893, 1N3890R, 1N3891R, AND 1N3893R JAN JANTX JANTXV AND JANS
MIL-S-62742 Base Document:1992 SWITCH, PRESSURE (METRIC)
MIL S 19500/260 : D SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER
MIL-W-80062 Revision C:1985 WELDING MACHINE, ARC, DC, TRANSFORMER RECTIFIER, ADJUSTABLE CONSTANT VOLTAGE
MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
MIL L 3976 : D LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT)
MIL-PRF-39012-55 Revision H:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2)
GGG-F-001391 Base Document:1967 FILER, PISTON RING
MIL-DTL-32361 Revision A:2011 COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER
MIL C 45918 : 0 CLEVISES AND CONNECTORS (ROD END)
GGG S 00278 : A (4) SHEARS AND SCISSORS
MIL T 24552 : A TERMINALS AND PLUGS, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR
DOD-B-24668 Base Document:1986 BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM
MIL-G-22077 Revision C:1993 GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE
MIL-DTL-24705 Revision B:2010 PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
MIL C 38999 : J CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS
MIL-S-85377 Revision A:1983 SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER
BS 6121-3:1990 Mechanical cable glands Specification for special corrosion resistant glands
MIL-H-87111 Revision A:1984 HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL-R-52255 Revision D:1988 REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS
DOD-STD-35-36 Revision B:1979 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING
MIL-F-80188 Revision B:1985 FURNACE, HEAT TREATING, ELECTRIC, METAL LINED, BOX DESIGN
MIL-B-13136 Revision B:1968 BATTERIES DRY
MIL-PRF-39012-17 Revision H:2006 Connectors, Plugs, Electrical, Coaxial, Radio Frequency, (Series BNC, (Cabled), Socket Contact, Class 2)
MIL-B-45857 Revision C:1985 BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY)
MIL-W-80235 Revision C:1991 WELDING MACHINES, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE, ALTERNATING CURRENT (AC)
ASTM F 975 : 1986 : R1993 : EDT 1 Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000)
MIL-DTL-3976 Revision F:2013 Lights, Marker, Clearance (Service and Blackout) General Specification for
MIL-DTL-38999 Revision M:2015 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
MIL-PRF-22 Revision E:2007 RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR
MIL-M-17522 Revision D:1967 MASK, PROTECTIVE, ND MARK V
MIL-H-11511 Revision G:1980 HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR
MIL-DTL-24127 Revision A:2016 EDUCTORS, GASOLINE, OIL, OR WATER
MIL-D-24 Revision C:1984 DYNAMOTOR, GENERAL SPECIFICATION FOR
MIL G 16356 : D GAGE, BOILER WATER, DIRECT READING
MIL H 28523 : B HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, JETTING (4OO PSI WORKING PRESSURE)
MS35122 Revision B:2005 PLUG, CONNECTOR (TYPE SM) UG-699/U
MIL-C-19908 Revision D:1986 CAPS, FUEL STORAGE TANK
MIL-T-28571 Revision G:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1,OOO GPM, 4 BY 2
MIL-DTL-16034 Revision B:2008 METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR
MIL-DTL-13625-2 Revision C:2017 SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
ARINC 628-6 : 2002 CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
MIL-PRF-28861 Revision E:2016 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
MIL-DTL-83729 Revision C:2013 CHOPPERS, ELECTROMECHANICAL, GENERAL SPECIFICATION FOR
MIL R 94 : E RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR
MIL-C-52037 Revision F:1990 COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI
MIL-DTL-83526 Revision D:2014 CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR
MIL-M-16125 Revision C:1963 METERS, ELECTRICAL, FREQUENCY
MIL-B-45022 Revision F:1992 BLAST CLEANING CABINETS
MIL C 39024 : A CONNECTOR, ELECTRICAL, TEST POINT TYPE, PANEL TYPE, SINGLE TEST POINT (THREADED), HIGH VOLTAGE
MIL C 15370 : F COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
IEC 63004:2015 Standard for receiver fixture interface
SAE AS 85028 : 2017 CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR
SAE AS 5680 : 2012 FUZE WELL MECHANICAL INTERFACE
ASTM A 338 : 1984 : R1998 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650&#176F (345&#176C)
BS EN 2997-1:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Technical specification
BS EN 2997-9:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Protective cover for receptacle. Product standard
I.S. EN 3545-001:2008 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-5015 Revision H:2000 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
MIL-DTL-45932 Revision A:2015 INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR
I.S. EN 3545-005:2014 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 005: FEMALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FREE HOUSING (PLUG) - PRODUCT STANDARD
I.S. EN 3545-006:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 006: MALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FIXED HOUSING (RECEPTACLE) - PRODUCT STANDARD
MIL-DTL-85061 Revision C:2009 COUPLING, FUEL LINE, FLEXIBLE, 125 PSI
BS 6121-1:1989 Mechanical cable glands Specification for metallic glands
MIL S 19500/550 : A SEMICONDUCTOR DEVICE, DIODE, SILICON, FAST RECOVERY HIGH CURRENT TYPES 1N6304, 1N6305, 1N6305, IN6306 AND -R TYPES JAN, JANTX, JANTXV
BB-C-120 Revision C:1980 CHLORINE, TECHNICAL: LIQUID
MIL C 83503 : A CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR
MIL-V-24740 Base Document:1990 VALVE, SAFETY, BOILER, REMOTE PILOT OPERATED, FOR SHIPBOARD USE
GG-T-321 Revision D:1977 THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS
MIL-PRF-12934 Revision L:2009 Resistor, Variable, Wirewound, Precision General Specification for
MIL-DTL-39012-9 Revision D:2017 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C, (CABLED-RECEPTACLE, FEMALE, JAM NUT, FRONT MOUNTED, CLASS 2)
MIL-PRF-39012-29 Revision H:2010 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, FLANGE MOUNTED, CLASS 2)
MIL S 6807 : D SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR
GGG-B-121 Revision B:1964 BAR, SINE; PLATE SINE (AND FIXTURES)
GGG-K-494 Revision C:1996 KNIVES; GENERAL PURPOSE SHOP, DETACHABLE BLADE
MIL C 39012/19 : G CONNECTOR, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2)
MIL-A-11892 Base Document:1952 ANTENNA GROUP OA-249( )/GRC-10 (COMPONENTS OF)
MIL-PRF-39012-16 Revision H:2006 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2)
MIL-E-24142 Revision B:1984 ENCLOSURE FOR ELECTRICAL FITTINGS AND FIXTURES, GENERAL SPECIFICATION FOR
GGG-V-410 Revision B:1993 VISE, BENCH BASE; SHEET METAL-WORKER'S; BENCH AND PIPE; JEWELER'S; MACHINISTS; AND MULTIPOSITION
ASTM F 1565 : 2000 : R2019 Standard Specification for Pressure-Reducing Valves for Steam Service
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MIL-P-52539 Revision B:1984 PIPELINE WELD SET TESTING
MS39202 Revision G:2012 ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END
MS39201 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE
MIL-F-3541 Revision C:1989 FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
FF-C-450 Revision G:2017 CLAMPS, WIRE ROPE
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
MIL-DTL-3928 Revision H:2016 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
MIL-A-2550 Revision B:1973 AMMUNITION, GENERAL SPECIFICATION FOR
MIL-PRF-31031-42 Base Document:2008 Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Socket Contact, for Semirigid Cable
MIL-PRF-55339 Revision C:2005 Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for
MIL-DTL-3954 Revision D:2015 DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR
GGG-P-831 Revision F:1995 PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK
AA-C-2929 Base Document:1997 CASEWORK, METAL AND WOOD (MEDICAL AND DENTAL)
MIL E 917 : E ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE)
MIL-B-2678 Revision C:1989 BRUSHES, WIRE, BOILER TUBE, EXPANDING TYPE FOR USE WITH ELECTRIC AND AIR MOTOR DRIVEN BOILER TUBE CLEANING OUTFITS, AND FIXED SECTIONAL HAND TYPE
GGG-S-735 Revision B:1976 STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR
MIL C 49142/12 : B CONNECTORS, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL-W-80119 Revision B:1971 WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC)
MIL-T-28690 Base Document:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 50 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER
MIL-C-38404 Revision E:1992 COUPLING, HOSE, REATTACHABLE SCREW-ON
MIL V 16271 : F VALVE, TANK FLOAT, ANGLE AND GLOBE PATTERN
MIL PRF 39030 : C DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
WW-C-621 Revision G:1990 COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED)
WW-P-521 Revision G:1977 PIPE FITTINGS, FLANGE FITTINGS, AND FLANGES, STEEL AND MALLEABLE IRON (THREADED AND BUTT WELDING) CLASS 150
MIL-A-28745 Revision A:1970 ANTENNA ASSEMBLY, OMNIDIRECTIONAL, LIGHT WEIGHT
MIL-A-22055 Base Document:1962 AMPLIFIER MARK 140 MODS 0, 1, AND 2
MIL-F-22839 Revision D:1988 FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE
GGG-C-95 Revision A:1987 CALIPERS, GENERAL PURPOSE
GGG-S-69 Revision D:1983 SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY)
FF-T-305 Revision C:1974 THUMBSCREW
GGG-N-398 Revision A:1963 NUT RUNNER, PNEUMATIC, PORTABLE
MIL V 12126 : E VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI
F-T-2907 Revision A:2006 TANKS, POTABLE HOT WATER STORAGE
MIL-DTL-32234 Base Document:2007 CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
MIL-G-80236 Base Document:1972 GENERATOR, AMMONIA DISSOCIATED ATMOSPHERE
MIL-DTL-27166 Revision F:2013 VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS
MIL D 39030 : B DUMMY LOAD, ELECTRICAL, COAXIAL AND STRIPLINE
MIL-DTL-26126 Revision C:2002 RELAYS, ELECTRICAL, OVERVOLTAGE, DC, GENERAL SPECIFICATION FOR
MIL-B-9925 Revision D:1988 BORING MACHINES, JIB, VERTICAL, SINGLE COLUMN AND DOUBLE COLUMN BRIDGE TYPES, MANUAL AND POWER FEED
MIL-B-24220 Revision A:1990 BLOCKS, TACKLE, SYNTHETIC ROPE
MIL-P-80104 Revision D:1990 PRESSES, SWAGING, WIRE ROPE FITTING, HYDRAULIC POWERED, ELECTRIC MOTOR DRIVEN
MIL-DTL-3655-15 Revision B:1999 Connector, Plug, Electrical, Class I (Coaxial, Series Twin, TWBNC)
MIL-DTL-32373 Base Document:2011 Plug, Machine Thread, Magnetic: Drain
MIL E 82463 : 0 EXERCISE HEAD MARK 78 MOD 2
MIL-M-80255 Revision B:1990 MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC)
MIL-DTL-6807 Revision F:2012 Switches, Rotary, Selector Power, General Specification for
MIL S 3928 : D SWITCH, (COAXIAL) RADIO FREQUENCY TRANSMISSION LINE, GENERAL SPECIFICATION FOR
MIL-PRF-64266 Revision B:2016 CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
MIL-B-45993 Revision A:1989 BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED
MIL C 19836 : B COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD
A-A-51135 Revision A:1986 HOLE SAWS, HOLE SAW ARBORS, AND HOLE SAW DRIVE PLATES
GG-I-271 Revision C:1964 IGNITER, FRICTION, OXYACETYLENE-TORCH
MIL-DTL-15291 Revision G:2013 SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR
MIL-L-28796 Base Document:1973 LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR
MIL-B-29186 Base Document:1978 BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION)
MIL V 17547 : A VALVES, CHECK, BRONZE (NAVY)
MIL L 14465 : C LIGHTS, COMPOSITE, VEHICULAR (METRIC)
MIL C 25516 : D CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
MIL-W-80046 Revision D:1990 WELDING MACHINES, RESISTANCE, STORED ENERGY, CAPACITOR DISCHARGE, DUAL RANGE
MIL-DTL-19772 Revision C:2017 VALVES, TEMPERATURE REGULATING, AUTOMATIC, NAVAL SHIPBOARD
MIL S 13625 : D SWITCH, PULL, SWITCH, PUSH, SWITCH, BEAM SELECTING, HEADLIGHT, ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
MIL-F-80233 Revision B:1985 FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH
OO-J-571 Revision F:2015 JOINTERS, WOODWORKING
MIL-S-3788 Revision G:1991 SHAPER, WOODWORKING
MIL-PRF-39012-79 Revision G:2008 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, CLASS 2, SEMIRIGID CABLE
MIL-A-22336 Revision B:1979 AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ
MIL-PRF-39012-69 Revision C:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, SOCKET CONTACT, RIGHT ANGLE, CLASS 2)
MIL I 85581 : 0 INTERVALOMETER, ROCKET LAUNCHER, REUSABLE
MIL-DTL-55181 Revision F:2012 CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
MIL-C-52973 Revision A:1987 COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR
MIL-L-51050 Revision B:1971 LABORATORY, PETROLEUM,SEMITRAILER MOUNTED
MIL S 22710 : E SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR
MIL-V-2961 Revision D:1990 VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE
MIL-A-45016 Revision C:1985 ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES
MIL-PRF-83446 Revision D:2015 COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR
MIL-T-24649 Revision A:1994 TELEPHONE, HARDWARE, SOUND POWERED GENERAL SPECIFICATION FOR
MIL-DTL-12520 Revision D:2005 Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for
KKK-C-650 Revision E:1985 CREEPER, MECHANIC'S
MIL-B-24692 Revision A:1993 BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC)
MIL-E-18435 Revision C:1980 EXHAUST HEAD, PIPE
GGG-S-00275 Base Document:1965 SHEARS, BARBERS
MIL-B-23071:C Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br>
MIL F 1183 : J FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR
XP PREN 3660-003 : 1994 XP AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 003: GROMMET NUT, TYPE A, 003 - PRODUCT STANDARD
DOD-M-24672 Base Document:1986 MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC)
MIL R 28750 : C SUPP 1 RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING
MIL-B-18855 Revision D:1969 BATTERY MK 53 MOD O SECONDARY TYPE, SILVER-ZINC-ALKALI
MIL D 28803 : A DISPLAY, OPTOELECTRONIC, READOUTS, BACK LIGHTED SEGMENTED, GENERAL SPECIFICATION FOR
MIL R 18152 : A ROD, STABILIZING, COATED
DOD-B-15072 Revision E:1981 BATTERIES, STORAGE, LEAD-ACID, PORTABLE
MIL-DTL-2 Revision G:2006 VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
MIL-V-2042 Revision E:1990 VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE
GG-A-440 Revision C:1981 ALIDADE, SURVEYING, TELESCOPE
MIL I 10986 : F INDICATORS AND TRANSMITTERS, LIQUID, TEMPERATURE AND PRESSURE
MIL-C-45854 Revision B:1973 CHASER, THREAD, HAND, (THREAD COMB)
GGG-S-793 Revision A:1964 STRIPPER, WIRE, BENCH
MIL-A-18977 Revision D:1971 AMPLIFIER CHANNEL (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
MIL S 0081619 : C SWITCH, SOLID STATE TRANSDUCER, (ANALOG AND DIGITAL) GENERAL SPECIFICATION FOR
DOD V 24657 : 0 VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC)
MIL-L-52918 Base Document:1977 LEVELS, SURVEYING, SELF LEVELLING AND TILTING
MIL-DTL-3655-14 Revision B:1999 Connector, Plug, Electrical, Class I (Coaxial, Series Twin, TWTNC)
MIL-L-23251 Revision E:1989 LATHES, ENGINE AND TOOLROOM 2516 AND 3220
MIL-C-85248 Revision A:1984 CAMERA, STILL PICTURE, PANORAMIC, KA-99A
MIL-DTL-12883 Revision F:2003 Sockets and Accessories for Plug-in Electronic Components, General Specification for
MIL C 23687 : 0 CASE, EXPLOSIVE DESTRUCTOR MARK 18 MOD O
MIL-B-24141 Revision A:1990 BLOCKS, TACKLE, WIRE ROPE
GGG-S-51 Revision E:1995 SAW, CIRCULAR, PORTABLE, ELECTRIC
MIL-PRF-39012-140 Revision A:2007 Connector, Plug, Electrical, Series SSMA, Pin Contact, Right Angle, for Flexible Cable, Class 2
MIL-PRF-23256 Revision C:1998 VALVE ASSEMBLY, SEAL
MIL-W-80183 Revision C:1984 WELDING MACHINE, ELECTRICAL RESISTANCE, ROLL SPOT, AND SEAM, PRESS TYPE, THREE PHASE
IFI 301 : 2008 GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES
A-A-55537 Revision A:2013 Nozzle, Oil Burner, Pressure Atomizing
GGG-S-656 Revision E:1996 SQUARES, CARPENTERS, DIEMAKERS, AND MACHINISTS
MIL S 19500/168 : C NOTICE 1 SEMICONDUCTOR DEVICE, THYRISTORS (CONTROLLED RECTIFIERS), SILICON TYPES 2N1771A,2N1772A,2N1774A,2N1776A,2N1777A,TX2N1771A, TX2N1772A,TX2N1774A,TX2N1776A,TX2N1777A
MIL A 18001 : K ANODES, SACRIFICIAL ZINC ALLOY
MIL-PRF-80034 Revision D:2015 SAWS, JIG, WOODWORKING
MIL-PRF-49142-12 Revision D:2005 CONNECTORS, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL C 39014 : E CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-G-17586 Base Document:1953 GAGE KIT, ELECTRICAL, FOR BARE AND RIFLING OF 20MM9 GROOVE GUN BARRELS
MIL-PRF-19500 Revision P:2010 SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL-PRF-87108 Revision B:1998 INFLATION DEVICE, FLU-2A/P
MIL-C-24174 Revision A:1987 CONTROL, NAVIGATION LIGHTS, GENERAL SPECIFICATION FOR
MIL S 55041 : C SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR
MIL-PRF-39012-26 Revision H:2010 Connectors, Plugs, Electrical, Coaxial Radio Frequency, (Series TNC (Cabled), Pin Contact, Class 2)
MIL-PRF-39012-40 Revision J:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), SOCKET CONTACT, JAM NUT, REAR MOUNTED, CLASS 2)
MIL-PRF-39012-75 Revision C:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, SOCKET CONTACT, RIGHT ANGLE, CLASS 2)
MIL-PRF-39019 Revision F:2010 Circuit Breakers, Magnetic, Low-Power Sealed, Trip-Free General Specification for
MIL-B-21418 Base Document:1958 BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION)
MIL-PRF-82537 Revision A:1988 CASE, CARTRIDGE, STEEL, SPIRAL-WRAPPED 40 MILLIMETER (MM) AM LARGER CAMBERS, GENERAL SPECIFICATION FOR
MIL-PRF-39012-137 Revision A:2007 CONNECTORS, PLUG, ELECTRICAL, SERIES SSMA, RIGHT ANGLE, PIN CONTACT, FOR SEMIRIGID CABLE, CLASS 2
MIL-PRF-14409 Revision J:2014 CAPACITORS, VARIABLE (PISTON TYPE, TUBULAR TRIMMER), GENERAL SPECIFICATION FOR
MIL-F-80082 Revision B:1986 FURNACE, HEAT TREATING AND BRAZING, ELECTRIC, CONTROLLED ATMOSPHERE, PUSHER AND CONVEYOR BELT TYPES
MIL C 83526 : B CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR
FF-N-836 Revision E:1994 Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat
MIL-M-24144 Revision D:1988 Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010)
GGG-K-450 Revision C:1998 KNIFE, CRAFTSMAN'S, MULTIPURPOSE (STENCIL, ETCHING, AND CUTTING, REMOVABLE BLADES)
MIL C 39012/20 : G CONNECTOR, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED) PIN CONTACT, RIGHT ANGLE, CLASS 2)
ANSI Z86.7.1 : 1987 UNDERWATER SAFETY-LOW-PRESSURE HOSE ASSEMBLIES CONNECTING FIRST AND SECOND STAGES ON SCUBA DIVING REGULATORS-DESIGN AND MINIMUM PERFORMANCE REQUIREMENTS,
MS39230 Revision C:2015 ELBOW, PIPE-STREET, 90 DEGREE (150 AND 300 LBS)
PREN 6047-001 : 200P1 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FOR HIGH CURRENT OPERATING TEMPERATURE +200 DEGREE C CONTINUOUS, AND FIRE RESISTANT - TECHNICAL SPECIFICATION
SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
SAE AS 5363 : 2016 ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR
ASTM F 1565 : 2000 Standard Specification for Pressure-Reducing Valves for Steam Service
SAE AIR 38 : 2015 GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS
ASTM F 1755M : 1996 : R2002 Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
BS EN 2997-6:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Hermetic jam-nut mounted receptacle. Product standard
MIL-DTL-39024 Revision C:2014 JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR
MIL-DTL-32393 Base Document:2011 COVER ASSEMBLY, TERMINAL BLOCK, TWO STUD
NASA STD 5020 : 2012 REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE
MIL-DTL-83413 Revision C:2012 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR
NASA MSFC STD 486 : 1992 STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR
MIL-PRF-21480-12 Revision F:2012 GENERATOR SYSTEM, 40 KVA, 400 HZ AC INTEGRALLY EXCITED, BRUSHLESS TYPE
IPC HDBK 630 : 0 GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY
MIL S 19500/478 : F SEMICONDUCTOR DEVICE, DIODE, SILICON, FAST RECOVERY, POWER RECTIFIER TYPES 1N5812, 1N5814, 1N5816 AND TYPES JAN, JANTX AND JANTXV
MIL-DTL-28840 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
MIL F 24787 : 0 FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR
MIL-DTL-71172 Revision B:2005 CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM
MIL-V-24619 Base Document:1983 VALVE, QUICK CLOSING, FOR SATURATED STEAM SERVICE
MIL-R-19309 Revision D:2003 RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2)
GGG-L-795 Revision E:1990 LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
MIL S 12883 : D SOCKET AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS GENERAL SPECIFICATION FOR
MIL-DTL-901 Revision E:2017 Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for
MIL-PRF-39012-39 Revision H:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL-DTL-12211 Revision G:2009 Switch, Pressure
MIL-PRF-19978 Revision L:2016 Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for
MIL-DTL-28803 Revision C:2013 DISPLAY, OPTOELECTRONIC, SEGMENTED READOUTS, BACKLIGHTED, GENERAL SPECIFICATION FOR
MS35118 Revision E:2013 Connector, Receptacle, Series SM, UG-695/U
MS35123 Revision C:2005 RECEPTACLE, CONNECTOR (TYPE SM) UG-700/U
MIL-PRF-39012-57 Revision H:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, CLASS 2)
MIL-V-24336 Revision A:1988 Valves, Pressure Reducing, For Oxygen Service
MIL-DTL-17376 Revision F:2007 Caps and Flanges, Compressed-Gas Cylinder, General Specification for
MSS SP 89 : 2003 PIPE HANGERS AND SUPPORTS - FABRICATION AND INSTALLATION PRACTICES
MIL-C-11198 Revision K:1984 CHEST, ICE STORAGE
MIL-I-85889 Base Document:1988 IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
GGG-C-406 Revision D:1975 CLAMP AND HAND SCREWS
MIL V 24488 : A VALVE, THREE WAY, MIXING, CHILLED WATER, QUIET DESIGN
MIL-PRF-39012-77 Revision B:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (UNCABLED, MALE, JAMNUT MOUNTED, CLASS 2)
MIL-V-5027 Revision D:1968 VALVES, CHECK, OXYGEN, HIGH PRESSURE
GGG-V-415 Revision A:1967 VISE, PIPE
BS 6121-2:1989 Mechanical cable glands Specification for polymeric glands
MIL F 52525 : D FITTING, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP HALVES, GENERAL SPECIFICATION FOR
GGG-H-33 Revision B:1996 HAMMER, HAND AND MALLET, SURFACE, PROTECTIVE, HOLDER AND ADAPTER, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED
MIL-PRF-39012-38 Revision J:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), SOCKET CONTACT, FLANGE MOUNTED, REAR MOUNTED, CLASS 2)
GGG-C-00835 Revision B:1970 CUTTER, STEEL STRAPPING
GGG-T-60 Revision A:1970 TAPS, THREAD CUTTING (CARBON STEEL, HAND, CUT THREAD, UNIFIED, AMERICAN AND METRIC THREAD FORM, SCREW AND BOLT)
MIL-F-21346 Revision B:1976 FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR
KKK-T-683 Revision F:2010 TRUCKS, HAND, TWO-WHEELED
MIL-W-80227 Revision A:1990 WELDING MACHINE, ULTRASONIC, SPOT
MIL-W-80211 Revision C:1990 WELDING MACHINE, (MICROWELDER), RESISTANCE, STORED ENERGY, CONSTANT VOLTAGE, LOW IMPEDANCE SOURCE, BENCH MOUNTED
ANSI Z86.7.2 : 1987 UNDERWATER SAFETY-HIGH-PRESSURE HOSE ASSEMBLIES ON SUBMERSIBLE PRESSURE GAGES FOR SCUBA DIVING-DESIGN AND MINIMUM PERFORMANCE REQUIREMENTS,
MIL-DTL-3655-16 Revision B:1999 Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWBNC)
MIL H 17505 : E HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE
MIL C 11693 : C CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20
MIL-PRF-49142-3 Revision G:2016 CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT, CLASS 2)
MIL-PRF-49142-9 Revision D:2005 CONNECTOR, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2)
MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
MIL-PRF-49142-6 Revision E:2005 CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB (CABLED), SOCKET CONTACT, CLASS 2)
MIL-A-23282 Revision B:1965 ACTUATOR
MIL-DTL-9177 Revision C:2014 CONNECTOR, AUDIO, AIRBORNE, GENERAL SPECIFICATION FOR
MIL-C-1258 Revision D:1983 CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING
MIL S 19500/211 : B NOTICE 2 SEMICONDUCTOR DEVICE, DIODE, SILICON, POWER RECTIFIER, TYPES 1N3164, 1N3168, 1N3170, 1N3172, 1N3174, 1N3175, 1N3176, 1N3177 & R TYPES JAN, JANTX & JANTXV
MIL-M-83524 Base Document:1985 MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS
MIL-PRF-55339-55 Base Document:2004 Adapter, Connectors, Electrical, Coaxial, Radio Frequency, Series SMA, Connector Saver
MIL-PRF-39012-81 Revision G:2007 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID) - SOCKET CONTACT, CLASS 2
GGG-S-283 Revision A:1967 SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE)
MIL C 12520 : C CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR
MIL B 17896 : C
MIL-PRF-39012-73 Revision C:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, SOCKET CONTACT, CLASS 2)
MIL F 15733 : G FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE
MIL-R-28894 Base Document:1986 RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MS16051 Revision G:2014 COUPLING, GROUND COOLING, COMBAT TYPE AIRCRAFT
MIL-N-3336 Revision A:1964 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DOD-B-24541 Revision A:1982 BATTERY CELLS AND ELEMENTS, LEAD-ACID, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC)
MIL-C-11569 Revision D:1979 CLAMPS, HOSE, WATER, UNIVERSAL 3/8- TO 1-INCH AND 1- TO 3-INCH
GGG-J-60 Revision A:1967 JACK KIT, HYDRAULIC, HAND (WITH TRUCK OR CHEST)
MIL T 55069 : C NOTICE 1 TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS
MIL-C-10950 Revision C:1968 CAPACITOR, FIXED, MICA DIELECTRIC, BUTTON STYLE, GENERAL SPECIFICATION FOR
MIL L 3661 : B LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR
MIL-PRF-39012-139 Revision A:2007 CONNECTOR, PLUG, ELECTRICAL, SERIES SSMA, PIN CONTACT, FOR FLEXIBLE CABLE, CLASS 2
MIL-PRF-39012-128 Revision C:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, SOLDER POCKET, SOCKET CONTACT JAM NUT MOUNTED, ISOLATED, CLASS 2)
MS17981 Revision D:2001 SOLENOID, ELECTRICAL, HORN, 24 VOLT DC
NASA KSC F 124 : 1994 SPECIFICATION FOR FITTINGS, FLARED TUBE
GGG-B-500 Revision D:2015 BLOCK, TACKLE (WIRE ROPE)
MIL C 24788 : 0 COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH
MS75021 Revision E:2013 CONNECTOR, RECEPTACLE, ELECTRICAL, - 12 CONTACT, INTERVEHICULAR, 28 VOLT, WATERPROOF
MIL-DTL-32362 Base Document:2010 LIGHT, MARKER, CLEARANCE-BLACK
MIL-PRF-39012-92 Revision D:2016 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, CLASS 2, WITHOUT CONTACT, .141 SEMIRIGID CABLE)
MIL-PRF-49142-5 Revision F:2005 CONNECTOR, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2)
MIL-DTL-3655-23 Revision B:1999 Connector, Receptacle, Electrical, Class I, (Coaxial, Series Twin, TWBNC, Bulkhead)
MIL-PRF-49142-7 Revision D:2005 CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRB (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL-B-4042 Revision E:1986 BORESCOPE ASSEMBLIES, CYLINDER INSPECTION
MIL-G-17489 Revision B:1961 GAGE, PRESSURE (AIR), BOILER
GG-M-2742 Base Document:1991 METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM
MIL-PRF-39012-28 Revision H:2010 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2)
MIL-K-83525 Base Document:1985 KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS
MIL-P-23108 Base Document:1961 PLUG IN UNIT FOR TEST SET, ECHO SIMULATOR (U)
MIL-C-11015 Revision F:2008 CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR
MIL-C-24224 Revision B:1985 Cartridge, Gas Pressure, for Pressurizing Dry Chemical Fire Extinguishers
MIL-PRF-39012-82 Revision G:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID), FLANGE MOUNTED - SOCKET CONTACT, CLASS 2
MIL-I-24739 Revision A:1991 INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER
MIL-DTL-1183 Revision K:2016 Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification for
GG-T-621 Revision C:1985 TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS
MIL-P-55149 Revision B:1988 POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR
MIL-W-80121 Revision B:1987 WELDING MACHINE, ELECTRICAL RESISTANCE SPOT, PORTABLE TYPE, SINGLE PHASE
GGG-P-840 Revision B:1994 PUNCHES AND DIES, AND PUNCH AND DIE SETS: METAL CUTTING, HAND; AND PUNCH, CLIP, SHEET METAL
MIL-R-81158 Revision A:1966 REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1)
MIL-W-7973 Revision F:1986 WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, THREE PHASE
MIL-W-21993 Revision B:1977 WIRE ROPE ASSEMBLY, MOORING, MARK 1 MOD 1
GGG-C-430 Revision A:1967 CLEANER, VALVE STEM GUIDE
ASTM F 1755M : 1996 : R2012 : EDT 1 Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
MIL A 002550 : C AMMUNITION, GENERAL SPECIFICATION FOR
MIL C 82537 : A CASE, CARTRIDGE, STEEL, SPIRAL WRAPPED 40 MILLIMETER (MM) AND LARGER CALIBERS, GENERAL SPECIFICATION FOR
H-B-771 Revision B:1966 BRUSHES, WIRE, ROTARY, GENERAL PURPOSE
MIL S 52028 : C SWITCH, VEHICULAR IGNITION: WATERPROOF, STARTER AND MAGNETO, WITH DEGASSER CONTROL
GGG-S-278 Revision B:1994 SHEARS AND SCISSORS
MIL-E-24759 Base Document:1991 Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate
MIL-F-28675 Revision B:1985 FITTINGS, CONDUIT, EXPLOSION PROOF (COUPLINGS, SEALS, UNIONS, ELBOWS)
MIL-B-17089 Revision A:1957 BAROMETER, ANEROID ML-448()UM
GGG C 00748 : C CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS
MIL-G-81168 Base Document:1964 GYROSCOPE, RATE INTEGRATING
F-C-2916 Base Document:1997 CAPS, VENT, FUEL STORAGE TANK
MIL-C-81003 Base Document:1964 CLINOMETER, ELEVATION ML-591/U
MIL-B-26994 Revision E:1992 BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE
MIL-M-80016 Revision C:1988 MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE
MIL-PRF-15305 Revision F:2013 COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL R 26126 : B RELAY, ELECTRICAL, OVERVOLTAGE DC, GENERAL SPECIFICATION FOR
MIL-DTL-17902 Revision G:2013 HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS
MIL-DTL-24558 Revision B:2011 TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR
MIL-B-45081 Revision E:1991 BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
MIL-PRF-49142 Revision B:2004 CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MS39231 Revision C:2015 ELBOW, PIPE STREET, 45 DEGREE, (150 & 300 POUNDS)
MIL-PRF-39012-8 Revision E:2015 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C (CABLED), FEMALE, FLANGE MOUNTED, REAR MOUNTED, CLASS 2)
MIL-PRF-19 Revision E:2007 RESISTOR, VARIABLE, WIREWOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR
DOD-B-24200 Revision B:1978 BATTERY CELLS AND ELEMENTS, LEAD-ACID, LEAD-ANTIMONY, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC)
MIL-PRF-39012-30 Revision H:2010 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL-PRF-39012-11 Revision D:1987 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C, (CABLED), FEMALE, JAM NUT, REAR MOUNTED, PRESSURIZED, CLASS 2)
MIL-PRF-28750 Revision J:2017 RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR
MIL-S-5944 Revision C:1990 SLING, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-17204 Revision D:1982 ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD
MIL-P-17098 Revision A:1952 PSYCHROMETER, HAND, ELECTRIC, ASPIRATING, M1-450/UM AND CARRYING CASE, PSYCHROMETER, CY-1238/UM
MIL-M-28519 Revision A:1984 METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM
MIL-F-13926 Revision B:1984 FIRE CONTROL MATERIAL MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR
MIL-R-83520 Base Document:1983 RELAYS, ELECTROMECHANICAL, GENERAL PURPOSE, NON-HERMETICALLY SEALED, PLASTIC ENCLOSURE (UST COVER)
MIL I 23145 : B INFLATION ASSEMBLIES, LIFE PRESERVER
MIL-P-52405 Revision C:1990 PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER)
MIL-B-45548 Revision D:1988 BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33)
MIL I 83287 : E INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR
GGG-P-441 Revision A:1965 PLATES, ANGLE, ADJUSTABLE AND SOLID
MIL M 2082 : C METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE
MIL-DTL-3655-22 Revision B:1999 Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWTNC, Bulkhead)
MIL-PRF-39023 Revision D:2006 RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, GENERAL SPECIFICATION FOR
MIL-PRF-11693 Revision E:2012 CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL-PRF-19500-380 Revision C:2014 TRANSISTOR, NPN, SILICON, POWER, FOR POWER-SWITCHING APPLICATIONS, STUD MOUNTED CASE, TYPES 2N4865, 2N5250, AND 2N5251, QUALITY LEVELS JANTX, JANTXV, AND JANS
MIL-S-24700 Base Document:1988 STUFFING TUBES FOR REFERENCE ELECTRODES, IMPRESSED CURRENT CATHODIC PROTECTION (METRIC)
GGG-S-630 Revision D:1986 SPREADERS, TIRE, PNEUMATICALLY OPERATED
MIL-B-14563 Revision C:1983 BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS)
MIL-S-3644 Revision B:1985 SHAFT ASSEMBLY, FLEXIBLE
GGG-C-800 Revision B:1964 CUTTER, WIRE ROPE, HAND OPERATED
MIL-DTL-3655-13 Revision B:1999 Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWTNC, Jam Nut Mounted)
GGG-R-00395 Base Document:1966 RIVETER, BLIND, HAND AND HEADS
MIL-W-80192 Revision C:1989 WELDING MACHINE, RESISTANCE, SPOT AND SEAM, METAL FOIL, SINGLE PHASE, PORTABLE
GGG-T-80 Revision A:1970 TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS
GGG-N-1907 Base Document:1975 NUTRUNNER AND SCREWDRIVER, PNEUMATIC
MIL C 83446 : B COIL, RADIO FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR
MIL-L-23400 Revision E:1986 LATHES, ENGINE AND TOOL ROOM, 16, 20 AND 25 INCH 7-1/2 TO 15 HP
GGG-W-680 Revision A:1964 WRENCHES, TAP AND REAMER, ADJUSTABLE
MIL-DTL-45918 Revision A:2009 CLEVISES AND CONNECTORS (ROD END)
MIL-DTL-3933-16 Revision E:2011 ATTENUATORS, FIXED, SPACE LEVEL, NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS), FREQUENCY RANGE: DC TO 18 GHZ, CLASS 4, LOW
MIL-PRF-31031-44 Base Document:2008 Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Pin Contact, for Semirigid Cable
MS27152 Revision C:2011 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
MIL S 19500/412 : A SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER TYPES 2N3846, 2N3847, JANTX, JANTXV AND JANS
MIL-DTL-29210 Revision E:2009 HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE
MIL-DTL-27599 Revision E:2016 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR
MIL-L-23249 Revision D:1984 LATHES, ENGINE AND TOOL ROOM 13 THRU 17 INCH
GGG-V-412 Revision B:1994 VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE
MIL-PRF-8622 Revision C:1997 VALVE, HIGH-PRESSURE OXYGEN CYLINDER, AUTOMATIC OPENING
MIL-O-81151 Revision A:1970 OSCILLATOR SUBASSEMBLY (NAVORD DWG 1563736)(FOR TORPEDO MARK 37 MODS O, 2, AND 3)
MIL-PRF-49142-11 Revision D:2005 CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, CLASS 2)
MIL L 12632 : D LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR
MIL-DTL-13625-1 Revision C:2017 SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
MIL-A-81327 Revision A:1985 ACOUSTIC LOCATING DEVICE (FOR TORPEDO MK 46 MOD O)
MIL R 17604 : C NOTICE 1 RECORDING EQUIPMENT, CARBON DIOXIDE, AUTOMATIC
GGG-G-17 Revision C:1987 GAGE, GENERAL PURPOSE
MIL-E-24572 Revision B:1992 EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE)
MIL-P-80054 Revision D:1988 PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED
MIL C 15305 : E COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL C 49142/8 : B CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) PLUG, PIN CONTACT, CLASS 2)
MIL-V-17462 Revision B:1981 VALVE, SAFETY, BOILER (SHIPBOARD USE)
MIL E 82592 : 0 EXERCISE HEAD, IMPACT, MK 86 MOD O (FOR TORPEDO MK 37 MODS O, 2, AND 3)
MS25002 Revision K:2011 SWITCH, ROTARY, 28/115 VOLTS
MS39233 Revision D:2015 COUPLING, PIPE STRAIGHT (150 & 300 POUNDS)
MIL-DTL-83733 Revision E:2006 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL-DTL-26500 Revision G:2011 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
MIL C 5015 : G CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR
MIL A 24215 : A ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR
MIL-DTL-8834 Revision K:2016 Switches, Toggle, Positive Break, General Specification for
MIL-S-52881 Revision B:1989 SERVICING UNITS, COMPRESSED GAS, MOBILE
MIL-DTL-27434 Revision B:2003 ADAPTERS, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR
A-A-50304 Base Document:1987 DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY
OO-M-340 Revision F:2004 MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT
MIL-T-19646 Revision A:1990 THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED
MIL-S-24036 Revision E:1989 SAWS, BAND, CUTOFF, HORIZONTAL, NON-ADJUSTABLE & ADJUSTABLE CUTTING ANGLE
MIL-P-80276 Base Document:1988 PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC)
MIL C 49142/11 : B (1) CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT CLASS 2)
GGG-C-771 Revision D:1964 CUTTERS, PIPE; AND CUTTERS, TUBE
MIL-DTL-3655-1 Revision C:2008 CONNECTOR, PLUG, ELECTRICAL, CLASS 1 (COAXIAL, SERIES TWIN) TYPE UG-421B/U
MIL-PRF-49142-10 Revision E:2005 CONNECTORS, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, UNCABLED (SERIES TRT, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2) HERMETIC AND NONHERMETIC
A-A-661 Revision A:1986 ENGRAVING MACHINE, PANTOGRAPH, TRACER GUIDED
MIL S 12285 : D SWITCH, THERMOSTATIC
MIL-B-15237 Revision B:1954 BATHYTHERMOGRAPHS, SURFACE VESSEL
MIL-PRF-49142-4 Revision H:2005 CONNECTORS, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, UNCABLED, (SERIES TRB, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2) HERMETIC AND NONHERMETIC
MIL-PRF-18546 Revision G:2004 RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED), GENERAL SPECIFICATION FOR
MIL O 55310 : C OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR
MIL R 83726 : B RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR)O.1 TO 500 SECONDS
MIL-T-28691 Base Document:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 65 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER
MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
MIL-R-23139 Revision B:1965 ROCKET MOTORS, SURFACE LAUNCHED, DEVELOPMENT AND QUALIFICATION REQUIREMENTS FOR
JSSG-2010-12 Base Document:1998 Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook
BB-S-1419 Base Document:1970 SULFUR HEXAFLUORIDE, TECHNICAL GRADE
MIL-DTL-642-14 Revision B:2013 PLUGS, TELEPHONE (TYPE U-384/U) 5 CONDUCTOR, SINGLE
MIL PRF 12883 : E SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR
MIL-DTL-10986 Revision G:2007 INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE
MIL-S-52156 Revision D:1988 SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE
MIL-W-80087 Revision C:1986 WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, ROCKER ARM, AIR OPERATED, THREE PHASE
MIL-G-26869 Revision D:1989 GROOVING MACHINE, SHEET METAL, SINGLE LOCK AND PITTSBURGH SEAMS, ELECTRIC MOTOR DRIVEN, FLOOR MOUNTED
MIL-A-22337 Base Document:1964 AMPLIFIER, RESOLVER ISOLATION
GGG-G-770 Revision B:1973 GUN, AIR BLOW, (BLAST CLEANING)
MIL C 49142/9 : B CONNECTOR, TRIAXIAL, RADIO FREQUENCY (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, JAMNUT MOUNTED CLASS 2)
A-A-59466 Revision C:2011 CLIPS, ELECTRICAL, GENERAL SPECIFICATION FOR
MIL B 62284 : 0 BLOWER ASSEMBLY, AIR CLEANER
MIL-S-12928 Revision H:1993 SEPARATOR, OIL AND WATER, COMPRESSED AIR
MIL C 18388 : C COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING
MIL-DTL-24788 Revision B:2017 Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch
MIL-D-82062 Revision C:1992 DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY
MIL-PRF-39012-67 Revision C:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, SOCKET CONTACT, CLASS 2)
GGG-A-825 Revision A:1967 AUGER MACHINE, PIPE AND SEWER, POWER OPERATED
MIL-P-80172 Revision C:1988 PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED
GGG-C-735 Revision B:1988 CUTTER, ANGLE, HAND OPERATED
MIL-A-22889 Base Document:1962 AMPLIFIER, ERROR LEVEL, ASSEMBLY
MIL-I-23062 Base Document:1961 IGNITER, MARK 247 MD O
MIL-DTL-16938 Revision D:2010 SEARCHLIGHTS, INCANDESCENT, SIGNALING, 8-INCH
MIL-T-24388 Revision C:1990 THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD)
MIL-C-52988 Revision A:1987 CHAMBER, DECOMPRESSION, DIVERS, 100 PSI
MIL S 13789 : D STRAINER, SEDIMENT, PIPELINE, BASKET TYPE
MIL-R-24414 Revision D:1991 Reels and Guides, Hose, Firefighting, Manually Operated
MIL-F-80133 Revision B:1987 FURNACES, HEAT TREATING, PIT TYPE, ELECTRIC, FORCED CONVECTION
MIL-PRF-6106 Revision P:2014 Relays, Electromagnetic General Specification for
MIL-A-52818 Base Document:1974 ANCHOR, GUY: SHIELD, EXPANSION
MIL-DTL-17840 Revision D:2018 Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application)
MIL-B-23755 Revision D:1991 BRAKE MACHINES, SHEET METAL, MANUALLY OPERATED, STANDARD AND BOX-PAN TYPE
MIL-B-52088 Revision F:1992 BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN
MIL L 16225 : B LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546()
RR-S-550 Revision E:2012 Sockets, Wire Rope
FF-C-77 Revision C:1986 CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY)
MIL-P-80128 Revision C:1987 PRESS, H FRAME, VERTICAL, HYDRAULIC, ELECTRIC MOTOR DRIVEN
MIL-DTL-21617-29 Base Document:2003 CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS
NASM35308:2015 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNF-2A
SAE AIR 4728 : 2013 REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS)
SAE AS 5877 : 2016 DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE
SAE MA 2250 : 2015 COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC
MS75009 Revision J:2005 BRACKET ASSEMBLY, RESISTOR (POWER TYPE)
BS EN 3716-001:2006 Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification
BS EN 2997-11:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Dummy receptacle. Product standard
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
MIL-DTL-83725 Revision E:2017 Relays, Vacuum, General Specification for
EN 291997-11 : 1997 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 11: DUMMY RECEPTACLE - PRODUCT STANDARD
EN 291997-6 : 1997 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 6: HERMETIC JAM-NUT MOUNTED RECEPTACLE - PRODUCT STANDARD
EN 2997-4 : 1997 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 4: JAM-NUT MOUNTED RECEPTACLE - PRODUCT STANDARD
EN 3218-001 : 2006 AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION
EN 2997-9 : 1997 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 9: PROTECTIVE COVER FOR RECEPTACLE - PRODUCT STANDARD
EN 3545-005:2014 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard
EN 291997-10 : 1997 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 10: PROTECTIVE COVER FOR PLUG - PRODUCT STANDARD
EN 3716-001 : 2006 AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION
EN 3545-001:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification
MIL-PRF-10304 Revision F:1999 METERS, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED, GENERAL SPECIFICATION FOR
MIL S 13735 : D SWITCH, TOGGLE, 28 VOLT DC
MIL-F-26301 Revision H:2014 FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR
MIL-DTL-9129 Revision G:2014 Discharges, Electrostatic General Specification for
MIL-DTL-24630 Revision A:2014 Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
MIL C 55302 : E CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE
MIL-C-29600 Base Document:1989 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE, CRIMP CONTACTS, ASSOCIATED HARDWARE GENERAL SPECIFICATION FOR
MIL-W-45844 Revision D:1987 WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR)
MIL-A-13092 Revision G:1990 ADAPTER SET, ENGINE ELECTRICAL TEST
MIL-PRF-39012-70 Revision D:2011 Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMB (Cabled, Pin Contact, Jamnut Mounted, Rear Mounted, Class 2)
MIL-B-23394 Revision B:1966 BATTERY MARK 46 MOD 1 PRIMARY TYPE, SILVER-ZINC-ALKALI
NN-H-0085 Base Document:1964 HANDLE, FILE (ADJUSTABLE TYPE)
GGG-B-490 Revision F:1992 BLOCKS, TACKLE (MANILA AND NYLON ROPE)
MIL C 83383 : C CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR
OO-S-236 Revision E:2015 SAW, CIRCULAR, TABLE TYPE, WOODWORKING, SINGLE TILTING ARBOR, FLOOR MOUNTED
MIL-A-21430 Revision B:1974 ACCESSORY SET MARK 1 MOD 1
MIL-STD-648 Revision E:2016 Specialized Shipping Containers
MIL-H-11689 Revision C:1974 HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING
GGG-S-58 Revision F:1993 Saw, Radial Overarm, Woodworking (No S/S Document)
MIL-A-22335 Base Document:1964 AMPLIFIER, VARIABLE GAIN
MIL G 45006 : F NOTICE 1 GRINDING MACHINE, CRANKSHAFT
MIL-PRF-39012-58 Revision H:2011 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, FLANGE MOUNTED CLASS 2)
MIL T 21038 : D TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR
WW-P-471 Revision C:1981 PIPE FITTINGS: BUSHINGS, LOCKNUTS, AND PLUGS; IRON, STEEL, AND ALUMINUM; (THREADED); 125 - 150 POUNDS
GGG-J-63 Revision C:1975 JACK, HYDRAULIC, HAND; JACK, BUMPER (HYDRAULIC)
L-H-520 Revision G:1983 HOSE AND HOSE ASSEMBLIES, NON-METALLIC (RUBBER, PLASTIC)
MIL S 28788 : A SWITCH, AIR AND LIQUID FLOW, SENSING GENERAL SPECIFICATION FOR
GG-L-260 Revision E:1988 LEVEL, SURVEYING; ABNEY TYPE
MIL-DTL-26202 Revision E:2006 LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR
MIL-L-80007 Revision E:1989 LATHES, TOOLROOM, 11-INCH THROUGH 13-INCH
06/30157875 DC : 0 PREN 2593-004 - AEROSPACE SERIES - BASES FOR 10 A ELECTROMAGNETIC PLUG-IN RELAYS, TWO AND FOUR POLES DOUBLE THROW - PART 004: BASE WITH MOLDED-IN FIXATION STUD, UNIFIED - PRODUCT STANDARD
MIL-PRF-83287 Revision G:2007 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
MIL-DTL-20065 Revision E:2016 VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE
NASM 21209 : 2003 INSERT, SCREW THREAD, COARSE AND FINE, SCREW LOCKING, HELICAL COIL, CRES
MIL-W-80187 Revision A:1985 WELDING MACHINE, ULTRASONIC BONDING, MINIATURE WIRE
MIL S 12211 : E SWITCH, PRESSURE
MIL A 55339 : A ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES & WITHIN SERIES) GENERAL SPECIFICATION FOR
MIL-A-22339 Base Document:1964 AMPLIFIERS, COMPUTATION
MIL S 15291 : E SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR
MIL N 45913 : B NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE
MIL-C-52978 Base Document:1980 CHEST, COLLAPSIBLE TANK
MIL C 83413 : A CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR
MIL C 55116 : B CONNECTOR, MINIATURE AUDIO, FIVE PIN
MIL V 23953 : C VALVE, COMBINED VENT-CHECK FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES)
MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
GGG-T-00570 Revision A:1965 TORCH KIT, SOLDERING (PROPANE GAS)
MIL-DTL-18001 Revision L:2013 ANODES, SACRIFICIAL ZINC ALLOY
F-F-351 Revision F:1999 FILTER AND FILTER ELEMENTS, FLUID, PRESSURE, LUBRICATING OIL, BYPASS AND FULL FLOW
MIL-PRF-32217 Revision A:2011 Scale Prevention in Sewage Collection, Holding and Transfer (CHT) and Vacuum CHT (VCHT) Piping Systems for Use on Naval Surface Ships
MIL-B-18558 Revision B:1988 Bearing, Propulsion Line Shaft, Oil Disc Lubricated
GGG-B-485 Revision B:1978 BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE)
MIL-P-11268 Revision L:1983 PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT
MIL-DTL-24044 Revision C:2013 FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR
MIL-DTL-13931 Revision J:1999 Cannon: General Specification for
MIL-F-80258 Revision A:1986 FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE
MIL-PRF-83726 Revision H:2017 Relays, Hybrid and Solid State, Time Delay, General Specification for
MIL-M-24605 Revision A:1988 MONITOR, HEAT STRESS
MIL-PRF-39012-74 Revision D:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, PIN CONTACT, CLASS 2)
MIL-PRF-39012-80 Revision F:2008 Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Right Angle, Class 2, Semirigid Cable
MIL-PRF-39012-3 Revision H:2006 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES N (CABLED), JAM NUT MOUNTED, SOCKET CONTACT, CLASS 2)
MIL-DTL-24215 Revision E:2015 Attenuators, Variable (Coaxial), General Specification for
MIL-T-7928 Revision G:1976 TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
A-A-2622 Revision A:1998 ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING
MIL-PRF-39012-59 Revision H:2011 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, JAM NUT MOUNTED CLASS 2)
GG-C-560 Revision D:1986 COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF
MIL I 45916 : B INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING
MIL-B-40098 Revision H:1989 BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A
MIL L 12606 : D LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02
GGG-D-780 Revision A:1965 DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE)
MIL-B-52796 Revision A:1977 BOLTS, RIBBED NECK, STRUCTURAL TYPE, WITH RECESSED LOCKNUT
MIL R 19365 : E RESISTOR, ADJUSTABLE, WIREWOUND, POWER
MIL-B-1947 Revision A:1960 BLOWER, SOOT (SHIPBOARD USE)
MIL-B-11818 Revision D:1985 BAROMETER, ANEROID ML-102()
MIL-R-14368 Revision C:1974 REGULATOR ASSEMBLY, RELAY ASSEMBLY, AND VOLTAGE REGULATOR ASSEMBLY: 24-VOLT (NOMINAL RATING), 100 TO 400 AMPERE, DIRECT CURRENT
MIL-PRF-39012-19 Revision H:2006 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (CABLED), SOCKET CONTACT, JAM NUT MOUNTED CLASS 2)
MIL-W-80253 Revision B:1990 WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, SINGLE PHASE
MIL-A-45997 Base Document:1987 ATTACHMENTS, CUTTING FOR TORCHES, OXYACETYLENE WELDING AND CUTTING
MIL-PRF-39012-68 Revision D:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, CLASS 2)
MIL H 53076 : 1987 HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS)
MIL L 10911 : D LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE)
MIL-F-80113 Revision D:1988 FURNACE, VACUUM, HEAT TREATING AND BRAZING
MIL-F-80089 Revision B:1986 FURNACES, HEAT-TREATING, GAS-FIRED, BOX-TYPE, DIRECT-FIRED AND FULL-MUFFLE DESIGN
MIL-D-80002 Revision E:1989 DRILLING MACHINE, UPRIGHT FLOOR TYPE, ROUND & BOX COLUMN, SLIDING HEAD, PLAIN TABLE, POWER FEED
GGG-O-591 Revision F:1977 OILER, HAND
MIL S 87966 : NOTICE 1 SAFETY EQUIPMENT FALL ARRESTING
MIL-A-22334 Base Document:1964 AMPLIFIER, SYNCHRO SERVO, 6 WATT 4OO CYCLE
W-C-440 Revision B:1970 CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR
MIL-PRF-39012-136 Revision A:2007 CONNECTORS, PLUG, ELECTRICAL, SERIES SSMA, PIN CONTACT, FOR SEMIRIGID CABLE, CLASS 2
MIL H 29210 : B HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE
GGG-T-661 Revision B:1966 TRAMMELS AND TRAMMEL POINTS
MIL-F-29046 Base Document:1974 FLOORING, RAISED, GENERAL SPECIFICATION FOR
MIL-H-28596 Revision B:1981 HOSE AND HOSE ASSEMBLY, RUBBER, STEAM
MIL-C-10015 Revision D:1982 CHEST, TOOL KIT, EMPTY
GGG-J-51 Revision E:1967 JACKS, MECHANICAL, HAND OPERATED (SCREW; SCISSORS; REEL; PLANER; AND RACK BAR)
MIL-W-80256 Revision A:1987 WELDING MACHINES, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE
MIL-B-2679 Revision A:1963 BRUSHES, WIRE, BOILER-TUBE, SECTIONAL TYPE, HAND PUSH
GGG-F-671 Revision B:1957 FRAME, HAND HACKSAW; FRAME, JEWELER'S SAW; AND FRAME, COPING SAW
MIL-B-45852 Revision A:1965 BORESCOPES M1 AND M2
GGG-D-698 Revision A:1963 DRILL, RATCHET (REVERSIBLE)
MIL-W-80070 Revision D:1987 WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, ROCKER, ARM, SINGLE PHASE
GGG-P-836 Revision A:1995 PUNCH AND DIE, KNOCKOUT
MIL-E-24715 Base Document:1989 EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211)
MIL-A-19521 Revision B:1992 ANODE RETAINING SUPPORT PLUGS AND ANODE SELECTION AND INSTALLATION DESIGN CRITERIA FOR SHIPBOARD CONDENSERS AND HEAT EXCHANGERS
MIL S 21604 : D SWITCHES, ROTARY, MULTIPOLE AND SELECTOR - GENERAL SPECIFICATION FOR
MIL-DTL-1189 Revision E:2018 VALVE, GATE, BRONZE
MIL-DTL-22606 Revision D:2011 FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN
MIL-B-11837 Revision C:1983 BLOCKS, TACKLE (WIRE ROPE, SNATCH, EXTRA-HEAVY DUTY)
MIL-DTL-17505 Revision G:2014 Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge
MIL-T-52809 Revision A:1986 TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC
MIL-DTL-62011 Revision E:2009 Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for
MIL-PRF-39012-27 Revision H:2010 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, CLASS 2)
MIL-PRF-39018 Revision G:2009 CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL-I-26525 Revision F:1988 INDICATOR, VOLTAGE, BATTERY GENERATOR 28 VOLT DC (NOMINAL)
MIL-S-16293 Revision G:1980 STRAINER, SEDIMENT, PIPELINE, WATER, AIR, GAS, OIL, OR STEAM
MIL-PRF-39012-7 Revision E:2015 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C (CABLED), FEMALE, CLASS 2)
MIL-PRF-39012-56 Revision G:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, RIGHT ANGLE, CLASS 2)
MIL C 3650 : A CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC
GGG-V-440 Revision A:1967 VISE, HANDSAW, FILING; BAND SAW FILING; AND CIRCULAR SAW FILING
MIL I 87108 : A INFLATION ASSEMBLY, FLU-2A/P
MIL-B-21518 Revision A:1961 BELLOWS ASSEMBLY, FLEXIBLE, FOR LAUNCHING SYSTEM, MISSILE MARK 17 MODS 0, 1, 2 AND 3
MIL-C-19902 Revision C:1986 CAPS, VENT, FUEL STORAGE TANK
MIL-PRF-28523 Revision C:1997 HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, JETTING (400 PSI WORKING PRESSURE)
MIL S 19500 : J SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL-S-23772 Base Document:1963 SWITCH, HYDROSTATIC, MARK 63 MOD O AND MOD 1
MIL T 28679 : A TESTER, ANTIFREEZE AND BATTERY ELECTROLYTE SOLUTION
MIL-B-83183 Revision B:1987 BARRIER, AIRCRAFT ARRESTING
MIL-W-80124 Revision C:1987 WELDING MACHINE (MICROWELDER), RESISTANCE, SINGLE PHASE, BENCH MOUNTED
MIL-E-23778 Base Document:1963 EXPLOSIVE FITTING MARK 7 MOD O
MIL-PRF-39012-18 Revision H:2006 Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, (Series BNC, (Cabled), Socket Contact, Flange Mounted, Class 2)
MIL-DTL-5423 Revision E:2009 BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR
MIL-PRF-80095 Revision E:2015 SAWS, BAND, WOODWORKING
A-A-59440 Revision D:2014 COCK-VALVES AND VALVES, GENERAL REQUIREMENTS FOR
MIL-PRF-39012-1 Revision J:2016 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), PIN CONTACT, CLASS 2)
MIL-A-14295 Revision C:1985 ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES
MIL-PRF-39012-83 Revision G:2007 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID) - JAM NUT MOUNTED, SOCKET CONTACT, CLASS 2
MIL-PRF-19500-124 Revision M:2016 SEMICONDUCTOR DEVICE, DIODE, SILICON, VOLTAGE REGULATOR, CASE MOUNT STUD PACKAGE, STANDARD AND REVERSE POLARITY, TYPES 1N2970B THROUGH 1N2977B, 1N2979B, 1N2980B, 1N2982B, 1N2984B THROUGH 1N2986B, 1N2988B THROUGH 1N2993B, 1N2995B, 1N2997B, 1N2999B THROUGH 1N3005B, 1N3007B, 1N3008B, 1N3009B, 1N3011B, 1N3012B, 1N3014B, 1N3015B, 1N3993A THROUGH 1N3998A, QUALITY LEVELS JAN,
MIL-A-18850 Revision C:1970 AMPLIFIER, SERVO (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
MIL L 7830 : D LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION
MIL-M-45907 Revision A:1984 MOUNT,SHIPPING CONTAINER, RESILIENT - SHOCK AND VIBRATION DAMPING
MIL-L-13896 Revision E:1987 LATHES, ENGINE, GAP, SLIDING BED AND REMOVABLE BLOCK
MIL-M-81385 Revision A:1967 MANIFOLD STEM ASSEMBLIES, LIFE PRESERVER
MIL-B-21160 Base Document:1957 BLADDERS, FLOTATION, MK 2 MOD 0 AND MK 2 MOD 1
MIL-T-11372 Revision F:1991 TRIVET, SURVEYING INSTRUMENT
MIL-T-4638 Revision B:1985 TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE)
MIL F 18953 : B FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD
MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
KKK-T-728 Revision A:1973 TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY
MIL F 23808 : NOTICE 1 FILING MACHINE, SAW BLADE, BAND AND CIRCULAR, AUTOMATIC
MIL-B-82117 Revision D:1983 BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION
00/707786 DC : 0 PREN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BB-F-1421 Revision B:1982 FLUOROCARBON REFRIGERANTS
ASTM F 1565 : 2000 : R2006 Standard Specification for Pressure-Reducing Valves for Steam Service
MIL C 55181 : C CONNECTOR, PLUG & RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF) TYPE MW, GENERAL SPECIFICATION FOR
A-A-55137 Revision A:2017 SAW, JIG, WOODWORKING
MIL-F-80069 Revision D:1989 FLARING, FLANGING, AND BEADING MACHINES, TUBE
FF-T-791 Revision B:1967 TURNBUCKLE
MIL-A-45597 Revision A:1984 ANALYZER, ENGINE, ELECTRONIC, CONSOLE-TYPE
GGG-D-777 Revision B:1966 DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL
MIL-DTL-38159 Revision D:2015 CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS
MIL P 24705 : A PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR
GGG-D-296 Revision B:1968 DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE; AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS)
DOD-STD-35-126 Base Document:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CYLINDERS, ACTUATING, LINEAR
MIL-DTL-3643 Revision B:2003 Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for
MIL-DTL-3650 Revision B:2003 Connectors, Coaxial, Radio Frequency, Series LC
MIL-O-81144 Revision B:1970 OSCILLATOR SUBASSEMBLY (NOSC DWG NO. 1563731)(TORPEDO MARK 37 MODS O AND 1)
MIL-PRF-32085 Base Document:2001 RELAYS, ELECTROMAGNETIC, 270 V DC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
MIL V 81722 : A VALVE, INFLATION, LIFE RAFT, FLU-6/P
MIL-P-85576 Revision B:1987 POWER SUPPLY PP-2581C/A
MIL-S-80224 Revision A:1989 SHEARING MACHINE, METAL NOTCHING, POWER DRIVEN
MS3345 Revision C:2013 FLANGE, SPLIT MOUNTING METER TIME TOTALIZING
MIL C 19978 : F CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR
MIL T 24558 : 0 TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR
SAE AS 1371 : 2015 NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM
MIL-PRF-49142-8 Revision D:2005 CONNECTORS, TRIAXIAL, RADIO FREQUENCY (SERIES TRT (CABLED), PLUG, PIN CONTACT, CLASS 2)
MIL-F-45911 Revision A:1973 FITTINGS, AUTOMOTIVE TUBE, SPHERICAL SLEEVE (COMPRESSION) TYPE, BRASS
MIL-C-10147 Revision D:1984 CABINET, PHOTOGRAPHIC STORAGE, FILM BM-11( )
PREN 3716-001 : 200P1 AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION
SAE AS 82 : 2018 SCREW THREAD FORM, AMERICAN NATIONAL, MODIFIED (NATIONAL ROUND - NR)
NAS1599:1980 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE CIRCULAR, ENVIRONMENT RESISTING, 200 DEG. C. MAXIMUM TEMPERATURE
STANAG 2916 : 2011 NOSE FUZE CONTOURS AND MATCHING PROJECTILE CAVITIES FOR ARTILLERY AND MORTAR PROJECTILES
SAE AS 50151 : 2015 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
BS EN 2997-4:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Jam-nut mounted receptacle. Product standard
BS EN 3218-001:2006 Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Technical specification
ASME B40.200:2008(R2013) Thermometers, Direct Reading and Remote Reading <br>
ASME Y14.6:2001 SCREW THREAD REPRESENTATION
ASME Y14.6 : 2001 : R2013 SCREW THREAD REPRESENTATION
ASME Y14.6 : 2001 : R2007 SCREW THREAD REPRESENTATION
ASME B40.200 : 2008 THERMOMETERS, DIRECT READING AND REMOTE READING

ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
ANSI C81.62 : 2017 ELECTRIC LAMPHOLDERS
CGA E 1 : 2016 STANDARD FOR RUBBER WELDING HOSE AND HOSE CONNECTIONS FOR GAS WELDING, CUTTING, AND ALLIED PROCESSES
ASME B1.12 : 1987 CLASS 5 INTERFERENCE-FIT THREAD
CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
FED-STD-H28-4 Base Document:1978 Screw Thread Standards for Federal Services, Section 4, Controlled Radius Rood Screw Threads, UNJ Symbol
FED-STD-H28-23 Base Document:1989 Screw-Thread Standards for Federal Services Section 23 Class 5 Interference-Fit Screw Threads
FED-STD-H28-18 Revision B:1991 SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 18 PHOTOGRAPHIC EQUIPMENT THREADS
FED-STD-H28-1 Revision A:1985 SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 1, NOMENCLATURE, DEFINITIONS AND LETTER SYMBOLS FOR SCREW THREADS
FED-STD-H28-8 Revision B:1992 Screw-Thread Standards for Federal Services Section 8 Dryseal Pipe Threads
FED-STD-H28-22 Revision A:1987 Screw-Thread Standards for Federal Services Section 22 Gages and Gaging for Metric Screw Threads-M and MJ Thread Forms
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
ASME B18.6.4 : 1998 THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS, INCH SERIES
SMPTE ST 76 : 96(R2006) MOTION-PICTURE CAMERAS - 16-MM AND 8-MM THREADED LENS MOUNTS
ANSI PH3.107 : 83(R1987) SHUTTER CABLE RELEASE TIP AND SOCKET, DIMENSIONS FOR,
ANSI PH3.101 : 83(R1987) TRIPOD CONNECTIONS FOR AMERICAN CAMERAS, 1/4-INCH-20 THREAD,
FED-STD-H28-10 Revision A:1993 Screw-Thread Standards for Federal Services Section 10 Hose Coupling and Fire Hose Coupling Screw Threads
ANSI C81.61 : 2017 ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS
FED-STD-H28-14 Revision A:1983 Screw-Thread Standards for Federal Services Section 14 Buttress Screw Threads-7 Deg./45 Deg. Flank Angles
FED-STD-H28-5 Base Document:1978 Screw Thread Standards for Federal Services, Section 5, Unified Miniature Screw Threads
ANSI PH3.102 : 83(R1987) TRIPOD CONNECTIONS FOR HEAVY-DUTY OR IMPORTED CAMERAS, 2/8-INCH-16 THREAD WITH ADAPTER FOR 1/4-INCH 20 THREAD TRIPOD SCREWS,
ASME B18.6.2 : 1998 SLOTTED HEAD CAP SCREWS, SQAURE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)
FED-STD-H28-21 Revision B:1984 Screw-Thread Standards for Federal Services Section 21 Metric Screw-Threads
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
FED-STD-H28-3 Base Document:1978 SCREW-THREADS STANDARDS FOR FEDERAL SERVICES 1957
FED-STD-H28-2 Revision B:1991 Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
FED-STD-H28-15 Revision B:1994 Screw-Thread Standards for Federal Services Section 15 Rolled Threads for Screw-Shells for ELectric Lampholders and Lamp Bases
MIL-S-8879 Revision C:1991 SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
FED-STD-H28-11 Base Document:1978 SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 11, HOSE CONNECTIONS FOR WELDING AND CUTTING EQUIPMENT
FED-STD-H28-7 Revision A:1984 Screw-Thread Standards for Federal Sevices Section 7 Pipe Threads, General Purpose
FED-STD-H28-17 Revision A:1985 Screw-Thread Standards for Federal Services Section 17 Surveying Instrument Mounting Threads
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
FED-STD-H28-16 Base Document:1978 SCREW THREAD STANDARDS FOR FEDERAL SERVICES SECTION 16 MICROSCOPE OBJECTIVE AND NOISE PIECE, 0.800 - 36AMO
FED-STD-H28-20 Revision B:1994 SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS
FED-STD-H28-6 Revision A:1978 SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 6 GAGES AND GAGING FOR UNIFIED SCREW THREADS-UN AND UNR THREAD FORMS
ANSI PH3.103 : 83(R1987) LENS BARREL ATTACHMENT THREADS FOR LENS ACCESSORIES, SPECIFICATIONS FOR,
MIL-HDBK-60 Base Document:1990 THREADED FASTENERS - TIGHTENING TO PROPER TENSION
ASME B18.6.3 : 2013 MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
ANSI C81.63 : 2007(R2014) GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS

View more information
£17.08
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.