MIL-DTL-39030 Revision F:2014
Current
Current
The latest, up-to-date edition.
Dummy Loads, Electrical, Coaxial and Stripline, General Specification for
Available format(s)
PDF
Published date
25-05-2014
Publisher
£13.91
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - GROUP QUALIFICATION
Specifies the qualification and general requirements for coaxial and stripline electrical dummy loads.
| DevelopmentNote |
Supersedes MIL PRF 39030 (C) (08/2000)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the qualification and general requirements for coaxial and stripline electrical dummy loads (see 6.1).
| MIL-DTL-39030-14 Revision B:2003 | Dummy Load, Electrical, Type XIV (Bifurcated Contact), Stripline, Low Power |
| MIL-DTL-39030-13 Revision B:2003 | Dummy Load, Electrical, Type XIV (Socket Contact), Stripline, Low Power |
| MIL-DTL-39030-7 Revision A:2003 | Dummy Loads, Electrical, Coaxial, Type III (BNC), Low Power |
| MIL-DTL-39030-6 Revision C:2012 | Dummy Loads, Electrical, Coaxial, Type V (N), Low Power |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-39030-4 Revision A:2003 | Dummy Loads, Electrical, Coaxial, Type I (SMA), Medium Power |
| MIL-DTL-39030-5 Revision C:2003 | Dummy Loads, Electrical, Coaxial, Type IV (TNC), Low Power |
| MIL-DTL-39030-3 Revision E:2013 | Dummy Loads, Electrical, Coaxial, Type I (SMA), Low Power |
| MIL-DTL-39030-11 Revision A:2003 | Dummy Load, Electrical, Coaxial, Type V (N), High Power |
| MIL-DTL-39030-16 Revision B:2003 | Dummy Load, Electrical, Type XIV (Bifurcated Contact), Stripline, Low Power |
| MIL-DTL-39030-23 Base Document:2015 | Dummy Load, Electrical, Coaxial, Type I (SMK), DC-32.0 GHz |
| MIL-DTL-39030-21 Revision B:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Medium Power |
| MIL-DTL-39030-20 Revision D:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Low Power |
| MIL-DTL-39030-8 Revision A:2003 | Dummy Load, Electrical, Coaxial, Type IV (TNC), Medium Power |
| MIL-DTL-39030-22 Revision A:2013 | Dummy Load, Electrical, Type XIV (Tab Contact), Stripline, High Power |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| SAE AMS2404G | Plating, Electroless Nickel |
| MIL-DTL-24044 Revision C:2013 | Flanges, Coaxial Line, Rigid, Air Dielectric, General Specification for |
| ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| MIL-DTL-55302 Revision G:2009 | Connectors, Printed Circuit Subassembly and Accessories |
| MIL-P-24691-3 Base Document:1987 | Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded |
| MIL-STD-348 Revision B:2014 | Radio Frequency Connector Interfaces for MIL-DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL-DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF-55339, MIL-DTL-83517 |
| ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
| ASTM D 2116 : 2016 : REDLINE | Standard Specification for FEP Resin Molding and Extrusion Materials |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM A 693 : 2016 : REDLINE | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM B 607 : 2015 : REDLINE | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| IEEE 287 : 2007 | PRECISION COAXIAL CONNECTORS (DC TO 110 GHZ) |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.