MIL-DTL-24151 Revision B:2016
Current
The latest, up-to-date edition.
Doors, Roller Curtain and Hinged Slat, and AssociatedOperating Equipment
English
20-09-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies roller curtain doors, hinged slatted doors, and associated operating equipment used for a wide variety of applications on naval ships.
| DevelopmentNote |
Supersedes MIL D 24151 (A). (10/2016)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers roller curtain doors, hinged slatted doors, and associated operating equipment used for a wide variety of applications on naval ships.
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 709 : 2017 : REDLINE | Standard Specification for Laminated Thermosetting Materials |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| SAE AS15000 | FITTING END, LUBRICATION, HYDRAULIC - DESIGN STANDARD |
| SAE AS81820D | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation |
| A-A-52414 Revision B:2012 | Bearing, Roller, Thrust |
| MIL-PRF-2765 Revision E:2004 | Rubber Sheet, Strip, Extruded, and Molded Shapes, Synthetic, Oil Resistant |
| MIL-DTL-2212 Revision K:2014 | Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices |
| SAE AS15720C | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE VII |
| MIL-STD-3020 Base Document:2007 | Fire Resistance of U.S. Naval Surface Ships |
| MIL-PRF-32006 Base Document:2004 | Controller, Programmable, Naval Shipboard |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| SAE AS15004C | FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV |
| MIL-HDBK-781 Revision A:1996 | Handbook for Reliability Test Methods, Plans, and Environments for Engineering, Development Qualification and Production |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| SAE AS81934B | Bearings, Sleeve, Plain and Flanged, Self-Lubricating |
| MIL-DTL-17060 Revision G:2009 | Motors, Alternating Current, Integral-Horsepower, Shipboard Use |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| MIL-STD-740-2 Base Document:1986 | Structureborne Vibratory Acceleration Measurements Acceptance Criteria of Shipboard Equipment |
| MIL C 24707/1 : 0 | CASTINGS, FERROUS, FOR MACHINERY AND STRUCTURAL APPLICATIONS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| FF-S-200 Revision B:2004 | Setscrews: Hexagon Socket and Spline Socket, Headless |
| MIL-DTL-16392 Revision D:2015 | Brake, Electro-Mechanical, Naval Shipboard |
| OO-K-220 Revision C:2015 | Key, Machine |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| MIL-PRF-32168 Base Document:2004 | Variable Speed Drive System for Induction and Synchronous Machines |
| FF-S-92 Revision C:2014 | Screw, Machine, Slotted, Cross-Recessed or Hexagon Head |
| MIL-STD-1474 Revision E:2015 | Noise Limits |
| MIL-HDBK-267 Revision A:1987 | Guide for Selection of Lubricants and Hydraulic Fluids for usein Shipboard Equipment |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-DTL-18240 Revision F:1997 | Fastener Element, Self-Locking, Threaded Fastener, 250 Degrees F Maximum |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| SAE AS15005C | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
| SAE AS15721C | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION RESISTANT STEEL, TYPE VIII |
| ASTM A 380/A380M : 2017 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.