MIL-DTL-24630 Revision A:2014
Current
The latest, up-to-date edition.
Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
English
17-06-2014
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for in-line check valves for use in hydraulic fluid and lubricating oil fluid systems of naval ships operating up to a maximum pressure of 3,000 pounds per square inch (lb/in[2]).
| DevelopmentNote |
Supersedes MIL V 24630. (07/2014)
|
| DocumentType |
Standard
|
| Pages |
14
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for in-line check valves for use in hydraulic fluid and lubricating oil fluid systems of naval ships operating up to a maximum pressure of 3,000 pounds per square inch (lb/in²).
| MIL-DTL-24630-1 Revision B:2014 | Valves, Check, In-Line, Non-Reversible Installation for Hydraulic Fluid and Lubricating Oil Fluid |
| SAE AS4716B | Gland Design, O-ring and Other Elastomeric Seals |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| SAE AS5781A | Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS4716 Glands |
| MIL-PRF-27617 Revision G:2011 | Grease, Aircraft and Instrument, Fuel and Oxidizer Resistant |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance, NATO Code H-515 |
| SAE AMS7276H | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems |
| SAE AS5782A | Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, For Use in AS4716 Glands |
| MIL-PRF-17331 Revision K:2013 | Lubricating Oil, Steam Turbine and Gear, Moderate Service |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS598 | Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems |
| MIL-STD-740-2 Base Document:1986 | Structureborne Vibratory Acceleration Measurements Acceptance Criteria of Shipboard Equipment |
| SAE AS8791C | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| MIL-G-5514 Revision G:1993 | Gland Design; Packings, Hydraulic, General Requirements for |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL-PRF-17672 Revision E:2010 | Hydraulic Fluid, Petroleum-Based, Inhibited |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| MIL-P-15024-5 Base Document:1971 | Plate, Identification |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-DTL-17111 Revision E:2012 | FLUID, POWER TRANSMISSION |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-C-15726 Revision F:1988 | Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
| MIL-H-22072 Revision C:1984 | Hydraulic Fluid, Catapult, NATO Code Number H-579 |
| MIL-H-19457 Revision D:1989 | Hydraulic Fluid, Fire-Resistant, Non-Neurotoxic |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.