MIL-DTL-32360 Base Document:2010
Current
The latest, up-to-date edition.
Stop Light - Taillight, Vehicular-24 Volt, Service Stop, Service Tail, Blackout Tail
06-10-2010
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies two types of vehicular taillights, which include a stop signal and blackout lighting.
| DevelopmentNote |
Inactive for New Design. Supersedes MS 51329 (B). (10/2010) NOTICE 1 - Notice of Validation but remains Inactive for New Design. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers two types of vehicular taillights, which include a stop signal and blackout lighting. This assembly will be referred to as \"tail/stop/blackout light\" for the remainder of the document.
| SAE J585_201406 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| ASTM D 709 : 2017 : REDLINE | Standard Specification for Laminated Thermosetting Materials |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MS35430 Revision C:2003 | Terminal, Lug, Solder Type, Copper Stamping, One Hole |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| MIL-DTL-13486-1 Revision D:2010 | Cable, Special Purpose, Electrical: Low-Tension, Heavy-Duty, Single Conductor, Unshielded |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| SAE J452_200312 | General Information—Chemical Compositions, Mechanical and Physical Properties of SAE Aluminum Casting Alloys |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| SAE AS25050B | Colors, Aeronautical Lights and Lighting Equipment, General Requirements For |
| ASTM D 707 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
| L-P-380 Revision C:1973 | Plastic Molding Material Methacrylate |
| MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (For Use on Ammunition and Other Metals) |
| MIL-HDBK-808 Base Document:1996 | Finish, Protective and Codes for Finishing Schemes for Ground and Ground Support Equipment |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-W-12332 Revision A:1964 | Welding, Resistance, Spot, Seam, and Projection; for Fabricating Assemblies of Low-Carbon Steel (S/S By AWS C1.1/C1.1M, AWS C1.4/C1.4M and AWS D8.1M) |
| A-A-52463 Revision B:1996 | Lamp Bulbs, Incandescent, Miniature, Single and Double Contact, Bayonet Candelabra Base |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| A-A-59569 Revision C:2009 | Braid, Wire (Copper, Tin-Coated, Silver-Coated, or Nickel Coated, Tubular or Flat) |
| TT-C-490 Revision F:2013 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| SAE J561_201011 | Electrical Terminals—Eyelet and Spade Type |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.