MIL-DTL-12606 Revision E:2000
Current
The latest, up-to-date edition.
Loudspeaker, Permanent Magnet (Unencased, 3-Inch and 4-Inch Diameter Cone, 2-Watt; Fungus-, and Immersion-Resistant), Type LS-445/U, M12606-01, and M12606-02
29-06-2000
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies type LS-445/U, M12606-01 and M12606-02, unencased, permanent magnet loudspeakers with a 2-watt normal (4-watt peak) input. These loudspeakers are fungus-, and immersion-resistant, and have a voice coil impedance of 8 +/-1 ohms. The cone and spider are made of polyamide-based phenolic material.
| DevelopmentNote |
Supersedes MIL L 12606 (D). (08/2000) Inactive for New Design. (02/2007)
|
| DocumentType |
Standard
|
| Pages |
100
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers type LS-445/U, M12606-01 and M12606-02, unencased, permanent magnet loudspeakers with a 2-watt normal (4-watt peak) input. These loudspeakers are fungus-, and immersion-resistant, and have a voice coil impedance of 8 ± 1 ohms. The cone and spider are made of polyamide-based phenolic material (see 6.1).
| MIL-A-29420 Base Document:1985 | Amplifier-Converter: AM-6879/URC (No S/S Document) |
| MIL-DTL-12632-2 Revision B:2016 | Loudspeaker, Permanent Magnet (Encased, 2 -Watt, Fungus-, Gunblast-, and Immersion- Resistant), Type LS-166/U |
| MIL-DTL-12632-4 Revision B:2016 | Loudspeaker, Permanent Magnet (Encased, 2 -Watt, Fungus-, Gunblast-, and Immersion- Resistant), Type LS-454/U |
| MIL-DTL-12632 Revision E:2016 | Loudspeakers, Permanent Magnet (Encased, 2-Watt, Fungus-, Gunblast-, and Immersion -Resistant), General Specification for |
| MIL-DTL-12632-1 Revision B:2016 | Loudspeaker, Permanent Magnet (Encased, 2 Watt, Fungus-, Gunblast-, and Immersion-Resistant), Type LS-590( )/U (No S/S Document) |
| NEMA MW 1000 : 2016 | MAGNET WIRE |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 709 : 2017 : REDLINE | Standard Specification for Laminated Thermosetting Materials |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| FF-S-92 Revision C:2014 | Screw, Machine, Slotted, Cross-Recessed or Hexagon Head |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.