MIL-PRF-32033 Revision A:2016
Current
The latest, up-to-date edition.
Lubricating Oil, General Purpose, Preservative (Water-Displacing, Low Temperature)
16-02-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies two types of water-displacing, preservative lubricating oil, hereafter known as 'oil(s)' or 'Type I' and 'Type II', for general purpose applications at low temperatures.
| DevelopmentNote |
Supersedes VV L 800 (C). (09/2000)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers two types of water-displacing, preservative lubricating oil, hereafter known as “oil(s)” or “Type I” and “Type II”, for general purpose applications at low temperatures. Type II is intended for use as a lubricant and preservative oil for corrosion-prone metallic surfaces. The oils can be applied by dipping, brushing, or by spraying from gas-pressurized cans. Type I is identified by Military Symbol PL-S and NATO Code Number O-190. Type II is identified by Military Symbol PL-SE. No NATO code is assigned for Type II.
| MIL-PRF-32558 Base Document:2016 | Blast Sensing and Blast Data Recording Systems for Use in U.S. Military Ground Vehicles |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| MIL-STD-3003 Revision B:2007 | Vehicles, Wheeled: Preparation for Shipment and Storage of |
| MIL-DTL-197 Revision M:2016 | Packaging of Bearings, Associated Parts and Subassemblies |
| MIL-PRF-46147 Revision D:2008 | Lubricant, Solid Film, Air Cured, Corrosion Inhibiting |
| MIL-PRF-45316 Revision J:2011 | Trailer, Tank: Potable Water, 400-Gallon, 2-Wheel, M149A2 |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-DTL-12235 Revision A:2009 | Projectile, Plate-Proofing (for Impact or Shock Testing) 37mm M1000, 57mm M1001, 75mm M1002, 90mm M1003, 105mm M1004, 20mm M1005, 57mm M1001A, and 75mm M1002A |
| MIL-DTL-46593 Revision B:2006 | Projectile, Calibers .22, .30, .50 and 20MM Fragment-Simulating |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM D 1152 : 2006 | Standard Specification for Methanol (Methyl Alcohol) |
| ASTM D 6547 : 2016 : REDLINE | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| MIL-PRF-680 Revision C:2010 | Degreasing Solvent |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 972 : 2016 : REDLINE | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 91 : 2002 : R2007 | Standard Test Method for Precipitation Number of Lubricating Oils |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 5949 : 2016 : REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.