CFR 29(PT1910.1000 TO END) : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
Superseded date
18-12-2019
Superseded by
Publisher
Sorry this product is not available in your region.
DocumentType |
Standard
|
PublisherName |
Code of Federal Regulations
|
Status |
Superseded
|
SupersededBy |
API MPM CH8.3 SPANISH : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
ASTM D 3366 : 1995 | Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
ASTM E 1525 : 2002 : R2008 | Standard Guide for Designing Biological Tests with Sediments |
ASTM D 4079 : 2000 : R2011 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
MIL A 18455 : C | ARGON, TECHNICAL |
MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
MIL A 24779 : 0 | ANODES, SACRIFICIAL ALUMINUM ALLOY |
API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
SAE AMS 3415 : 2017 | FLUX, ALUMINUM DIP BRAZING 1030 DEGREES F (554 DEGREES C) OR LOWER LIQUIDUS |
API 753 : 2007 : R2012 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PORTABLE BUILDINGS |
ANSI/AAMI ST58:2013(R2018) | CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
CSA Z314.1 : 2009 : R2013 | ETHYLENE OXIDE STERILIZERS FOR HEALTH CARE FACILITIES |
MIL-PRF-3135 Revision H:2008 | DECK COVERING UNDERLAY MATERIALS |
API 554-3 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
ASTM D 1492 : 2013 : REDLINE | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
GGG-W-290 Revision C:1985 | WHEELS, ABRASIVE, SNAGGING |
SAE AMS2644F | Inspection Material, Penetrant |
MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
TT-P-1952 Revision F:2015 | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
NASA KSC SPEC P 0022 : 2001 | SOLVENT, CLEANING, 1,3-DICHLORO-1,1,2,2,3-PENTAFLUORO-PROPANE, HCFC-225G, SPECIFICATION FOR |
BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
MIL-PRF-46002 Revision D:2010 | PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED |
GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
ASTM D 5310 : 2010 : R2014 | Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
ASTM E 2421 : 2015 : REDLINE | Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities |
09/30203808 DC : 0 | BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
API MPM CH3.1A SPANISH : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3.1A: STANDARD PRACTICE FOR THE MANUAL GAUGING OF PETROLEUM AND PETROLEUM PRODUCTS |
ASTM D 3120 : 2008 | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
NFPA 8506 : 1998 | HEAT RECOVERY STEAM GENERATOR SYSTEMS |
MIL-PRF-32558 Base Document:2016 | BLAST SENSING AND BLAST DATA RECORDING SYSTEMS FOR USE IN U.S. MILITARY GROUND VEHICLES |
MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
MIL-PRF-24763 Revision B:2009 | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
ASTM F 1764 : 1997 : R2012 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
AAMI TIR55 : 2014 | HUMAN FACTORS ENGINEERING FOR PROCESSING MEDICAL DEVICES |
ASTM D 4081 : 2016 : REDLINE | Standard Specification for Drycleaning-Grade Perchloroethylene |
ASTM E 2518 : 2011 | Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer) |
MIL-DTL-11414 Revision F:2013 | Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
AWS BRH:2007 | BRAZING HANDBOOK |
ASTM F 1819 : 2007 : R2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
CSA Z142 : 2010 : FR | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
ASTM D 4376 : 2015 : REDLINE | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
ASTM D 6596 : 2000 : R2005 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
ASTM E 2694 : 2016 : REDLINE | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
API MPM CH2.8A : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
ASTM D 4789 : 2012 : REDLINE | Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol) |
ASTM D 5310 : 2010 : EDT 1 | Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
ASTM D 6142 : 2016 : REDLINE | Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography |
VV-G-671 Revision G:2014 | GREASE, GRAPHITE |
TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
ASTM E 2505 : 2007 | Standard Practice for Industrial Rope Access |
MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
ASTM D 4079 : 2000 : R2006 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
NASA STD 8719.10 : 2006 | UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS |
IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
ASTM F 2233 : 2003 : R2015 | Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers |
ASTM E 202 : 2012-06 | TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
ASTM D 7994 : 2017 | Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
ASTM F 1559 : 1994 : R2007 | Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) |
AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
SAE AMS3144 | Primer, Anodic Electrodeposition for Aircraft Applications |
API 2201 : 2003 : R2010 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
ASTM D 5808 : 2009 : REV A | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
SSPC-QP 2 : 2009 | STANDARD FOR EVALUATING PAINTING CONTRACTORS (REMOVAL OF HAZARDOUS COATINGS FROM INDUSTRIAL/MARINE STEEL STRUCTURES) |
AAMI HE75 : 2009(R2013) | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
ASTM D 2439 : 2016 : REDLINE | Standard Specification for Refined Phenol |
ASTM D 5310 : 2010 | Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
AWS C5.10/C5.10M : 2003 | RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING |
AWS A5.9/A5.9M : 2012 | SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS |
AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
AWS C4.6M : 2006 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
AWS C1.1M/C1.1 : 2012 | RECOMMENDED PRACTICES FOR RESISTANCE WELDING |
AAMI ST65:2008(R2018) | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
API MPM CH17.2 SPANISH : 1999 | MANUAL DE ESTANDARES DE MEDICION DE PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 2: MEDICIONES DE CARGAS A BORDO DE BUQUE TANQUES |
ASTM E 2077 : 2000 : R2010 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
ASTM E 1972 : 2004 : R2011 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment (Withdrawn 2017) |
BS ISO 13577-1:2016 | Industrial furnaces and associated processing equipment. Safety General requirements |
ASTM F 1559 : 1994 : R2015 | Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) (Withdrawn 2024) |
ASTM E 2052 : 1999 | Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008) |
SAE AMS3961/3 | 350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 1 |
ASTM D 4276 : 2002 : R2012 | Standard Practice for Confined Area Entry |
AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
ASTM E 1368 : 2014 : REDLINE | Standard Practice for Visual Inspection of Asbestos Abatement Projects |
ASTM D 7185 : 2017 : REDLINE | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 1154 : 2011-07 | PRACTICES FOR QUALITATIVELY EVALUATING THE COMFORT, FIT, FUNCTION, AND DURABILITY OF PROTECTIVE ENSEMBLES AND ENSEMBLE COMPONENTS |
NACE RP 01 92 : 0 | MONITORING CORROSION IN OIL AND GAS PRODUCTION WITH IRON COUNTS |
NACE 11206 : 0 | BIOCIDE MONITORING AND CONTROL IN COOLING TOWERS |
ASTM F 2349 : 2004 : R2010 | Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems (Withdrawn 2017) |
ASTM E 2112 : 2007 : R2016 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM D 4276 : 2002 : R2007 | Standard Practice for Confined Area Entry |
ASTM E 1819 : 2015 : REDLINE | Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities |
ASTM D 5386 : 2016 : REDLINE | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM F 1453 : 1992 : R2012 | Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care |
ASTM F 1764 : 1997 : R2007 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
ASTM F 1557 : 1994 : R2002 | Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics |
ASTM E 848 : 1994 : R2000 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
ASTM E 1687 : 2010 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
ASTM F 2100 : 2011 | Standard Specification for Performance of Materials Used in Medical Face Masks |
ASTM D 6399 : 2010-07 | GUIDE FOR SELECTING INSTRUMENTS AND METHODS FOR MEASURING AIR QUALITY IN AIRCRAFT CABINS |
ASTM E 1741 : 2000 | Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009) |
ASTM E 848 : 1994 : R2016 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
ASTM D 6237 : 2009 : R2015 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
ASTM D 7976 : 2014 | Standard Specification for Purified Terephthalic Acid (PTA) |
ASTM D 5395 : 2003 | Standard Specification for Reclaimed Methylene Chloride |
ASTM D 5960 : 2003 : R2013 | Standard Specification for Technical Grade Ethylene Dichloride |
ASTM E 1076 : 1985 : R2005 | Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities (Withdrawn 2010) |
ASTM D 7509 : 2009 | Standard Specification for Fluorocarbon Feedstock Grade Chloroform |
ASTM D 4490 : 1996 : R2006 : EDT 1 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
ASTM F 1671/F1671M : 2013 : REDLINE | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
ASTM D 6367 : 2017 : REDLINE | Standard Specification for AMS (α-Methylstyrene) |
ASCE 7 05 : 2006 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
ASTM D 5175 : 1991 : R2017 : EDT 1 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
ASTM D 3852 : 2016 : REDLINE | Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid |
ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM E 1687 : 2010 : R2014 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
ASTM D 7704 : 2016 : REDLINE | Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration |
ASTM E 2581 : 2014 : REDLINE | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM D 4579 : 2000 : R2012 | Standard Practice for Handling an Acid Degreaser or Still |
ASTM F 2779 : 2010 : R2016 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
ASTM D 7977 : 2019 | Standard Test Methods for Polymer Content of AMS (α-Methylstyrene) |
ASTM D 5854 : 1996 : R2000 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
ASTM D 3856 : 2011 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water |
ASTM E 1647 : 2016 : REDLINE | Standard Practice for Determining Contrast Sensitivity in Radiology |
ASTM D 7266 : 2013 : R2018 : EDT 1 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
ASTM E 2505 : 2007 : R2014 | Standard Practice for Industrial Rope Access |
ASTM F 1453 : 1992 : R2008 | Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care |
ASTM D 5578 : 2004 : R2010 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
ASTM C 1217 : 2000 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
ASTM D 5396 : 2004 : R2010 | Standard Specification for Reclaimed Perchloroethylene |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
NETA ECS : 2015 | ELECTRICAL COMMISSIONING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
NACE 46107 : 0 | CONTROL OF CORROSION, DEPOSITION, AND MICROBIOLOGICAL GROWTH IN RECIRCULATING WATER SYSTEMS IN BUILDINGS |
UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
ASHRAE 34 : 2013 | DESIGNATION AND SAFETY CLASSIFICATION OF REFRIGERANTS |
A-A-59405 Base Document:1999 | TRUCKS, LIFT, FORK, ELECTRIC, SIT-DOWN, FRONT WHEEL DRIVE, REAR WHEEL STEER FOR SHIPBOARD USE |
FC 4-740-14N : 2014 | FACILITIES CRITERIA - NAVY AND MARINE CORPS CHILD DEVELOPMENT CENTERS |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
IPC 7526 : 2007 | STENCIL AND MISPRINTED BOARD CLEANING HANDBOOK |
MIL-STD-2148 Revision A:2016 | Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs |
PIP VESAC001 : 2016 | AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
ASHRAE/ASHE 170 SPANISH : 2008 | VENTILATION OF HEALTH CARE FACILITIES |
IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
PIP VECV1001 : 2017 | DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
MIL-PRF-32335 Base Document:2010 | TRICON REFRIGERATED CONTAINER SYSTEM (TRCS) |
OO-S-256 Revision K:2012 | Sewing Machine, Industrial, General Specification for |
NACE 02203 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
NACE RP 02 88 : 2004 | INSPECTION OF LININGS ON STEEL AND CONCRETE |
DOD-PRF-85734 Revision A:2004 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
ASTM F 1001 : 2012 : R2017 | Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
NFPA 434 : 2002 | CODE FOR THE STORAGE OF PESTICIDES |
NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
NSF 341 : 2012 | HEALTH/FITNESS FACILITIES |
ASTM D 5808 : 2009 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
ASTM D 7125 : 2017 : REDLINE | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
NFPA 1581 : 2015 | FIRE DEPARTMENT INFECTION CONTROL PROGRAM |
A-A-52306 Revision A:1995 | LUBRICATING OIL, HEAVY-DUTY DIESEL ENGINE |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
API MPM CH8.3 : 1995(R2010) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
API MPM CH3.1A : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3.1A: STANDARD PRACTICE FOR THE MANUAL GAUGING OF PETROLEUM AND PETROLEUM PRODUCTS |
ASTM D 4126 : 2002 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
API RP 554-3 : 2008 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
ASTM D 4297 : 2015 : REDLINE | Standard Practice for Sampling and Handling Bisphenol A<brk/>(4,4<emph type="ital" >′</emph> -Isopropylidinediphenol) |
ASTM F 1114 : 2016 : REDLINE | Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray |
API 2217A REDLINE : 2009 | GUIDELINES FOR SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 1437 : 1998 | Standard Practice for Handling Silicon Carbide Whiskers (Withdrawn 2007) |
BB-H-886 Revision E:2011 | HYDROGEN |
ASTM D 6596:2000 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
ASTM D 1998 : 2015 : REDLINE | Standard Specification for Polyethylene Upright Storage Tanks |
ASTM D 4589 : 1996 | Standard Test Method for Nitrobenzene in Aniline (Withdrawn 2002) |
MIL-DTL-53131 Revision A:1998 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
MIL-DTL-24784 Revision D:2017 | MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS, GENERAL SPECIFICATION FOR |
ASTM D 4080 : 2015 : REDLINE | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
ASTM D 3120 : 2008 : R2014 | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
ASTM D 5808 : 2009 : REV A : R2014 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
NSS 1740.12 : 0 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
EM 385-1-1 : 20031103 | SAFETY - SAFETY AND HEALTH REQUIREMENTS |
NACE 6G198 : 0 | WET ABRASIVE BLAST CLEANING |
A-A-59412 Revision A:2013 | SWAGING MACHINE, ROTARY, FLOOR-MOUNTED |
ASTM D 4079 : 2000 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
ASTM D 8032 : 2016 | Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
API MPM CH2.8A:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
API RP 1604 : 1996 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
A-A-52316 Revision C:2010 | TESTER, CONSTRUCTION MATERIALS, MOISTURE & DENSITY (TCMMD) |
ASTM E 2706 : 2018 | Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements |
ASTM D 7871 : 2018 : REDLINE | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
ASTM E 1972 : 2004 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
MIL-W-80062 Revision C:1985 | WELDING MACHINE, ARC, DC, TRANSFORMER RECTIFIER, ADJUSTABLE CONSTANT VOLTAGE |
UFC 3-240-13FN : Change 1 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL WATER TREATMENT OPERATION AND MAINTENANCE |
ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
ASTM F 1001 : 2012 | Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
API RP 753:2007 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PORTABLE BUILDINGS |
ASTM D 4276 : 2002 | Standard Practice for Confined Area Entry |
A-A-59665 Revision A:2013 | Morpholine, Technical |
ASTM E 1497 : 2017 : REDLINE | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
AWWA M3 : 7 | SAFETY MANAGEMENT FOR UTILITIES |
API 752 REDLINE : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
ASTM E 1525 : 2002 | Standard Guide for Designing Biological Tests with Sediments |
MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
ASTM E 1076 : 1985 : R1999 | Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities |
CSA Z142 :2010 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
ASTM F 1555 : 1994 : R2002 | Standard Guide for Characteristics for Extremity Splints |
CSA Z142 : 2010 : R2014 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
ANSI B11.8:2001(R2007) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
NFPA 1521 : 2015 | FIRE DEPARTMENT SAFETY OFFICER PROFESSIONAL QUALIFICATIONS |
API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
MIL-DTL-87177 Revision B:2014 | Lubricants, Corrosion Preventive Compound, Water Displacing, Synthetic |
ASTM D 5616 : 2004 : R2010 | Standard Specification for Reclaimed Trichloroethylene |
SPI B151.2 : 1999 | PLASTIC FILM CASTING MACHINERY - MANUFACTURE, CARE AND USE |
ASTM D 5836 : 2008 : R2013 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
API MPM CH2.8A : 1991(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
ASTM D 6596 : 2000 : R2016 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
SCTE 205 : 2014 | OUTSIDE PLANT POWER RECOMMENDED PREVENTIVE MAINTENANCE PROCEDURE |
ASTM D 3614 : 2007 | Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ANSI/ISA-92.00.02:2013 | INSTALLATION, OPERATION, AND MAINTENANCE OF TOXIC GAS-DETECTION INSTRUMENTS |
SAE AS87132 | Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners |
ISA 92.00.01 : 2010(R2015) | PERFORMANCE REQUIREMENTS FOR TOXIC GAS DETECTORS |
API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
ASCE 37 02 : 2002 | DESIGN LOADS ON STRUCTURES DURING CONSTRUCTION |
API MPM CH17.2 : 1999 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
ASTM F 2462 : 2005 : R2015 | Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems |
ANSI B11 TR2 : 1997 | MIST CONTROL CONSIDERATIONS FOR THE DESIGN, INSTALLATION, AND USE OF MACHINE TOOLS USING METALWORKING FLUIDS |
AWWA B101 : 2016 | PRECOAT FILTER MEDIA |
IEEE/ANSI N42.37-2006 | American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention |
ASTM E 1255 : 2016 : REDLINE | Standard Practice for Radioscopy |
ASTM D 7504 : 2018 : REDLINE | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ANSI B165.1 : 2013 | POWER TOOLS - POWER-DRIVEN BRUSHING TOOLS - SAFETY REQUIREMENTS FOR DESIGN, CARE, AND USE |
ASTM D 6875 : 2018 : REDLINE | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
AAMI TIR 12 : 2010 | DESIGNING, TESTING, AND LABELING REUSABLE MEDICAL DEVICES FOR REPROCESSING IN HEALTH CARE FACILITIES: A GUIDE FOR MEDICAL DEVICE MANUFACTURERS |
ASTM F 3057 : 2016 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings |
ASTM D 5471 : 2017-07 | SPECIFICATION FOR O-XYLENE 980 |
ASTM F 1506 : 2017-11 | PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS |
UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
ASTM F 2407 : 2006 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
ASTM D 7884 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography |
ASTM D 5317 : 1998 : R2011 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
ASTM E 2505 : 2007 : R2014 : EDT 1 | Standard Practice for Industrial Rope Access (Withdrawn 2023) |
ASTM D 7882 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode |
NACE TM 01 98 : 2016 | SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE |
SAE J2360_201204 | Automotive Gear Lubricants for Commercial and Military Use |
ASTM E 2250 : 2002 | Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids (Withdrawn 2008) |
ASTM D 5396 : 2004 | Standard Specification for Reclaimed Perchloroethylene |
ASTM D 5578 : 2004 : R2015 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024) |
ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
ASTM E 2601 : 2015 : REDLINE | Standard Practice for Radiological Emergency Response |
ASTM D 6144 : 2017 : REDLINE | Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography |
ASTM D 8005 : 2018 : REDLINE | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM E 2112 : 2007 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM D 5616 : 2004 | Standard Specification for Reclaimed Trichloroethylene |
ASTM F 1557 : 1994 | Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics |
ASTM F 1558 : 1994 : R2015 | Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) (Withdrawn 2024) |
ASTM C 1217 : 2000 : R2012 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
ASTM D 7457 : 2012 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019) |
ASTM D 5309 : 2017 : REDLINE | Standard Specification for Cyclohexane 999 |
ASTM F 1555 : 1994 : R2007 | Standard Guide for Characteristics for Extremity Splints |
ASTM F 2318 : 2015 | Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2024) |
ASTM E 1628 : 1994 : R2000 | Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration |
ASTM D 4079 : 2000 : R2016 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
ASTM F 2349 : 2004 | Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems |
ASTM F 1819 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ASTM D 4701 : 2000 : R2015 | Standard Specification for Technical Grade Methylene Chloride |
ASTM D 4844 : 2016 : REDLINE | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
ASTM D 8130 : 2017 | Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method |
ASTM D 1631 : 2010 : R2018 : EDT 1 | Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
ASTM F 2462 : 2005 : R2010 | Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
ISO/TR 18112:2006 | Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic medical devices for professional use Summary of regulatory requirements for information supplied by the manufacturer |
NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
NFPA 1 : 2021 | FIRE CODE |
NEMA EW 4-2009 | GRAPHIC SYMBOLS FOR ARC WELDING AND CUTTING APPARATUS |
NEMA MS 4:2010 | Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) Devices |
FC 4-721-10N : Change 6 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS UNACCOMPANIED HOUSING |
ASTM D 5194 : 2018 : REDLINE | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
STANREC 4727 : 2015 | COMBINED OPERATIONAL CHARACTERISTICS, TECHNICAL SPECIFICATIONS, AND EVALUATION, TESTS AND CRITERIA FOR PROTECTIVE MASKS |
ASTM D 852 : 2016 : REDLINE | Standard Test Method for Solidification Point of Benzene |
NFPA 560 : 2007 | STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION |
ANSI B11.25 : 2015 | SAFETY REQUIREMENTS FOR LARGE MACHINES |
IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
I.S. EN ISO 17349:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PLATFORMS HANDLING STREAMS WITH HIGH CONTENT OF CO[2] AT HIGH PRESSURES (ISO 17349:2016) |
NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
AAMI ST65 : 2008 : R2013 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
ASTM E 1429 : 1991 : R2000 | Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure |
API MPM CH17.2 : 1999 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
SAE J2359_199811 | Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service |
O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
ASTM D 5396 : 2004 : R2015 | Standard Specification for Reclaimed Perchloroethylene |
IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
NACE TM 01 87 : 2011 | EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
ASTM E 1527 : 2013 | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
BS ISO 27470:2011 | Aircraft ground equipment. Upper deck catering vehicle. Functional requirements |
SAE AMS 1320 : 1995 | REMOVER, DECAL ADHESIVE |
AIHA Z10 : 2012 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS |
ASTM E 2077 : 2000 : R2016 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
ANSI/ASSE Z390.1 CHINESE : 2006 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
BS EN 61511-2:2017 | Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1 |
ASTM E 2247 : 2016 : REDLINE | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property |
NASA KSC SPEC P 0026 : 2002 | PROPELLANTS, RECOVERED HALON-1301, SPECIFICATION FOR |
NACE SP 02 95 : 2008 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS |
API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
MIL-W-80119 Revision B:1971 | WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC) |
ASTM D 3160 : 2016 : REDLINE | Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) |
GGG-S-69 Revision D:1983 | SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) |
SSPC-GUIDE 6 : 2015 | GUIDE FOR CONTAINING SURFACE PREPARATION DEBRIS GENERATED DURING PAINT REMOVAL OPERATIONS |
MIL-B-9925 Revision D:1988 | BORING MACHINES, JIB, VERTICAL, SINGLE COLUMN AND DOUBLE COLUMN BRIDGE TYPES, MANUAL AND POWER FEED |
ASTM E 848 : 1994 : R2006 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
ASTM D 5175 : 1991 : R1996 : EDT 1 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
BS IEC 62443-2-1 : 2010 | INDUSTRIAL COMMUNICATION NETWORKS - NETWORK AND SYSTEM SECURITY - PART 2-1: ESTABLISHING AN INDUSTRIAL AUTOMATION AND CONTROL SYSTEM SECURITY PROGRAM |
ASTM E 2770 : 2017 : REDLINE | Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins |
API 1604 : 1996 : R2010 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
NASA MSFC SPEC 2083 : 2007 | MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE |
API MPM CH2.7:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 7: CALIBRATION OF BARGE TANKS |
ASTM F 2233 : 2003 | Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers |
ASTM C 1217 : 2000 : R2006 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
ISA 99.02.01 : 2009 | SECURITY FOR INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS: ESTABLISHING AN INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS SECURITY PROGRAM |
FAA AC 150/5200-31 : 2009 | AIRPORT EMERGENCY PLAN |
MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
AAMI TIR 11 : 2005 | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
ASTM F 1556 : 1994 : R2002 | Standard Guide for Spinal Immobilization and Extrication (Spined) Device Characteristics |
PD ISO/TR 12885:2008 | Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies |
MIL-PRF-24613 Revision A:2007 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
NACE SP 02 88:2011 | INSPECTION OF LINING APPLICATION IN STEEL AND CONCRETE EQUIPMENT |
API 4629 : 2007 | HEXAVALENT CHROMIUM EXPOSURES DURING HOT WORK |
A-A-59392 Base Document:1999 | GRINDING MACHINES, SURFACE, ROTARY TABLE, HORIZONTAL SPINDLE |
ASTM F 1296 : 2008 : R2015 | Standard Guide for Evaluating Chemical Protective Clothing |
ASTM D 3686 : 2013 : REDLINE | Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
MIL-STD-1504 Revision C:2007 | ABRASIVE BLASTING |
MIL-STD-870 Revision C:2007 | Cadmium Plating, Low Embrittlement, Electrodepositon |
ASTM D 848 : 2014-03 | TEST METHOD FOR ACID WASH COLOR OF INDUSTRIAL AROMATIC HYDROCARBONS |
KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
ASTM D 5606 : 2017 : REDLINE | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 5616 : 2004 : R2016 | Standard Specification for Reclaimed Trichloroethylene |
MIL T 29197 : 0 | TRUCK, CLEANER, CATCH BASIN, VACUUM-PRESSURE JET, DED |
ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
ASTM F 2100 : 2011 : R2018 | Standard Specification for Performance of Materials Used in Medical Face Masks |
UFC 4-740-06 : 2006 | UNIFIED FACILITIES CRITERIA - YOUTH CENTERS |
ASTM D 4579 : 2000 | Standard Practice for Handling an Acid Degreaser or Still |
MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
A-A-52529 Revision A:2016 | HANGER, EXHAUST, MUFFLER AND TAILPIPE (METRIC) |
A-A-59777 Revision A:2009 | DRY FILTER UNIT |
AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
ASTM E 1429 : 1991 : R1996 | Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure |
MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
MIL-PRF-32516 Base Document:2015 | ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
A-A-59384 Revision B:2014 | PRESS, 'H' FRAME, HYDRAULIC |
ASTM D 3614 : 2007 : R2013 | Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
NFPA 1194 : 2018 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
ASTM F 857 : 2017 : REDLINE | Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type |
ASTM D 7883 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography |
ASTM E 1851 : 2015 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
SAE J1992_201204 | Wheels/Rims - Military Vehicles - Test Procedures and Performance Requirements |
API MPMS CH2.7 : 1991(R2014) | Tank Calibration: Calibration of Barge Tanks |
API 554-2 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
API MPM CH8.3 : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
SAE J1657_201104 | Selection Criteria for Retrofit Refrigerants to Replace CFC-12 (R-12) in Mobile Air-Conditioning Systems |
ANSI/AAMI PB70:2012 | LIQUID BARRIER PERFORMANCE AND CLASSIFICATION OF PROTECTIVE APPAREL AND DRAPES INTENDED FOR USE IN HEALTH CARE FACILITIES |
AAMI TIR56:2013(R2020) | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
AAMI ST65 : 2008 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
IEEE 1542-2007 | IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
SAE ARP4047A | Aircraft Deicing Vehicle, Self-Propelled, Small Capacity |
NACE RP 01 98 : 2004 | THE CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
ASTM F 860 : 2007 : R2018 : EDT 1 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
ASTM F 2995 : 2013 | Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids |
ASTM D 5175 : 1991 : R2011 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
ASTM D 3438 : 2015 : REDLINE | Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride |
IEEE 1048-2003 | IEEE Guide for Protective Grounding of Power Lines |
ASTM D 5854 : 1996 : R2010 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
ASTM E 2993 : 2016 | Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
ASTM F 1862/F1862M : 2017 : REDLINE | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
ASTM E 2662 : 2015 : REDLINE | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM D 4913 : 2000 : R2011 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
ASTM D 5395 : 2003 : R2008 | Standard Specification for Reclaimed Methylene Chloride <a href="#fn00002"></a> |
ASTM F 1616 : 1995 : R2009 | Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings |
ASTM F 1557 : 1994 : R2007 | Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics (Withdrawn 2016) |
ASTM E 94 : 2004 | Standard Guide for Radiographic Examination |
ASTM D 7509 : 2009 : R2015 | Standard Specification for Fluorocarbon Feedstock Grade Chloroform |
ASTM D 4701 : 2000 : R2011 | Standard Specification for Technical Grade Methylene Chloride |
ASTM E 1628 : 1994 : R2008 | Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration (Withdrawn 2014) |
ASTM F 1559 : 1994 | Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) |
ASTM UOP 516 : 2000 | Sampling and Handling of Gasolines, Distillate Fuels and C3-C4 Fractions |
ASTM D 4995 : 2010 | Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
ASTM D 5871 : 2017 : REDLINE | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 4126 : 2002 : R2007 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
ASTM F 2233 : 2003 : R2009 | Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers |
ASTM E 1908 : 2016 : REDLINE | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM D 3436 : 1999 | Standard Practice for Sampling and Handling Aniline (Withdrawn 2005) |
ASTM D 8063 : 2018 | Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
ASTM D 8031 : 2016 | Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration |
ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
ASTM E 2458 : 2017 : REDLINE | Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces |
ISO/TR 12885:2008 | Nanotechnologies Health and safety practices in occupational settings relevant to nanotechnologies |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
NASA SSTD 8070 0083 : 2011 | STANDARD FOR THE 13.8KV DISTRIBUTION SYSTEM |
NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
NASA KSC STD F 0004 : 2010 | FIRE PROTECTION DESIGN, STANDARD FOR |
NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
NASA KSC SPEC P 0019 : 1999 | SOLVENT, CLEANING, 1,1,1,2,3,4,4,5,5,5-DECAFLUOROPENTANE (62 WT%) AND TRANS-1,2-DICHLOROETHYLENE (38 WT%), VERTREL MCA, SPECIFICATION FOR |
NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
NASA KSC SO S 9 : 1993 | RETEST AND REFURBISHMENT OF COMPRESSED GAS TRAILERS AND MOVABLE STORAGE UNITS, STANDARD FOR |
NASA KSC STD Z 0004 : 2002 | STRUCTURAL DESIGN, STANDARD FOR |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
ASHRAE GUIDELINE 24 : 2015 | VENTILATION AND INDOOR AIR QUALITY IN LOW-RISE RESIDENTIAL BUILDINGS |
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
NASA KSC SPEC P 0024 : 2001 | REFRIGERANT, HCFC-124, 2-CHLORO-1,1,1,2-TETRAFLUOROETHANE, SPECIFICATION FOR |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
NASA KSC STD Z 0008 : 1996 | DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
ASTM E 1281 : 2015 : REDLINE | Standard Guide for Nuclear Facility Decommissioning Plans |
ASTM D 4490 : 1996 : R2011 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
NASA KSC SPEC P 0021 : 2001 | SOLVENT, CLEANING, 1,1,1,2,3,4,4,5,5,5-DECAFLUOROPENTANE, SPECIFICATION FOR |
API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API MPM CH2.7 : 1991 : R2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 7: CALIBRATION OF BARGE TANKS |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
ASTM E 1302 : 2013 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM D 5317 : 1998 : R2003 : EDT 1 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
SCTE 108 : 2018 | TEST METHOD FOR DIELECTRIC WITHSTAND OF COAXIAL CABLE |
UFC 4-740-14 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: CHILD DEVELOPMENT CENTERS |
SSPC-QP 8 : 2015 | STANDARD PROCEDURE FOR EVALUATING THE QUALIFICATIONS OF CONTRACTING FIRMS THAT INSTALL POLYMER COATINGS, SURFACINGS, LININGS OR FRP COMPOSITES ON CONCRETE AND OTHER CEMENTITIOUS SUBSTRATES |
A-A-59618 Base Document:2002 | Cleaner, Pressure, Hot-Water, Skid-Mounted |
KKK-A-1822 Revision E:2002 | STAR-OF-LIFE AMBULANCE |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
ADIVP-01 : 2014 | ALLIED GUIDE TO DIVING OPERATIONS |
ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
ABS 0154 : 2016 COR 2018 | GUIDE FOR MEANS OF ACCESS TO TANKS AND HOLDS FOR INSPECTION |
UFC 4-740-15 : 2011 | UNIFIED FACILITIES CRITERIA - CONTINUOUS CHILD CARE FACILITIES |
BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
MMM-A-101 Base Document:2016 | ADHESIVE, HAPS-FREE, BONDING VULCANIZED SYNTHETICS RUBBER TO STEEL |
ASTM D 4735 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF TRACE THIOPHENE IN REFINED BENZENE BY GAS CHROMATOGRAPHY |
MIL-PRF-32142 Base Document:2003 | CLOTH, WATERPROOF AND MOISTURE VAPOR PERMEABLE |
ASTM D 4995 : 2010 : R2015 | Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent |
ASTM D 7200 : 2012 : REDLINE | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy |
GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
ASTM D 5854 : 1996 : R2005 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
API MPM CH2.8A : 1991 : R2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
SAE AMS 3185 : 1999 | HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE |
ASTM F 1558 : 1994 | Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) |
ASTM F 1556 : 1994 : R2007 | Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics |
ASTM D 7266 : 2013 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
NACE SP 01 92 : 2012 | MONITORING CORROSION IN OIL AND GAS PRODUCTION WITH IRON COUNTS |
CSA Z314.1:2009 | ETHYLENE OXIDE STERILIZERS FOR HEALTH CARE FACILITIES |
I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
ASTM D 4701 : 2000 : R2006 | Standard Specification for Technical Grade Methylene Chloride |
MIL-PRF-52955 Revision D:2009 | IMPROVED POSITION AND AZIMUTH DETERMINING SYSTEM (IPADS) |
ASTM D 7360 : 2016 : REDLINE | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration |
MIL-PRF-32550 Base Document:2016 | METAL-RICH PRIMER |
MIL A 24699 : 0 | ACOUSTICAL TRANSMISSION LOSS BARRIER MATERIAL |
MIL-STD-2197 Revision A:2012 | BRUSH ELECTROPLATING ON MARINE MACHINERY |
API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
ASTM D 4597 : 2010 : R2015 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
AWS C5.5/C5.5M : 2003 | RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING |
API TR 2568 : 2007 | EVAPORATIVE LOSS FROM THE CLEANING OF STORAGE TANKS |
MIL-PRF-10924 Revision H:2008 | GREASE, AUTOMOTIVE AND ARTILLERY |
MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
ASTM D 4447 : 2015 : REDLINE | Standard Guide for Disposal of Laboratory Chemicals and Samples |
API 554-2 : 2008 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
ASTM D 7375 : 2008 | Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration (Withdrawn 2017) |
ASTM D 5175 : 1991 : R2003 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
FED-STD-369 Base Document:1977 | SANITATION STANDARDS FOR FISH PLANTS |
MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
API 2027 : 2002 : R2007 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
ASTM D 4126 : 2002 : R2012 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade<brk> 1,1,1-Trichloroethane (Withdrawn 2017) |
GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
MIL-B-23755 Revision D:1991 | BRAKE MACHINES, SHEET METAL, MANUALLY OPERATED, STANDARD AND BOX-PAN TYPE |
ASTM D 5310 : 2010 : R2018 | Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
ASTM F 1764 : 1997 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
MIL-PRF-83779 Revision C:2013 | WATER INDICATING PASTE |
ASTM E 2625 : 2009 | Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities |
NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
MIL-DTL-24641 Revision B:2015 | Acid, Hydrofluoric: Technical |
ASTM F 1453 : 1992 : R2003 | Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care |
ASTM D 6313 : 1999 | Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry (Withdrawn 2008) |
ANSI/AIHA/ASSP Z9.9-2010 | PORTABLE VENTILATION SYSTEMS |
SAE AMS3961/2 | 350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 2 |
AWS C4.6M:2006(R2012) | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
ASTM E 2277 : 2014 | Standard Guide for Design and Construction of Coal Ash Structural Fills |
FAA 3900.65 : 2014 | FLIGHT STANDARDS SERVICE (AFS) FALL PROTECTION PROGRAM (FPP) |
ASTM D 5578 : 2004 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
ASTM E 2144 : 2011 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM D 7977 : 2014 | Standard Test Methods for Polymer Content of AMS (α-Methylstyrene) |
SCTE 203 : 2014 | PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS FACILITIES - TEST METHODS |
NSF 342 : 2014 | SUSTAINABILITY ASSESSMENT FOR WALLCOVERING PRODUCTS |
AMEPP-9 : 2008 | HEALTH CARE WASTE MANAGEMENT PROCEDURES ABOARD NATO NAVY VESSELS |
ASTM D 4490 : 1996 : R2016 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
API RP 1145 : 2018 | PREPARATION OF RESPONSE PLANS FOR OIL SPILLS FROM OFFSHORE FACILITIES |
ASTM F 1022 : 2006 | Standard Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type (Withdrawn 2012) |
ANSI/ASSE Z390.1 SPANISH : 2006 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
ANSI/ASSE A10.26 : 2011 | EMERGENCY PROCEDURES FOR CONSTRUCTION AND DEMOLITION SITES |
ASTM F 1558 : 1994 : R2007 | Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) |
ASTM F 1555 : 1994 : R2015 | Standard Guide for Characteristics for Extremity Splints (Withdrawn 2024) |
ANSI A10.24 : 2014 | ROOFING - SAFETY REQUIREMENTS FOR LOW-SLOPED ROOFS |
ASTM E 1435 : 1998 | Standard Practice for Handling Densified Articles of Aluminum Oxide Reinforced with Silicon Carbide Whiskers (Withdrawn 2007) |
ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ASTM D 7124 : 2017 : REDLINE | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
NASA KSC SPEC P 0020 : 2001 | SOLVENT, CLEANING, 3,3-DICHLORO-1,1,1,2,2-PENTAFLUOROPROPANE (45 PM 5 WT%) AND 1,3-DICHLORO-1,1,2,2,3-PENTAFLUOROPROPANE (55 PM 5 WT%), HCFC-225, SPECIFICATION FOR |
API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
ASTM D 2306 : 2000 | Standard Test Method for C<sub>8</sub> Aromatic Hydrocarbon Analysis by Gas Chromatography (Withdrawn 2006) |
ASTM E 1120 : 2016 : REDLINE | Standard Specification for Liquid Chlorine |
ASTM D 5317 : 1998 : R2017 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
SAE J2361_199811 | Lubricating Oil, Internal Combustion Engine, Preservation Break-In |
ASTM D 2340 : 2018 : REDLINE | Standard Test Method for Peroxides in Styrene Monomer |
ASTM D 5854 : 1996 : R2015 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
ASTM D 6596 : 2000 : R2011 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
ASTM D 6237 : 2009 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
ASTM D 847 : 2016 : REDLINE | Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons |
ASTM D 7266 : 2013 : EDT 1 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
IEEE DRAFT 602 : D2 2006 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
ASTM D 6428 : 1999 | Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection (Withdrawn 2006) |
ASTM F 1556 : 1994 | Standard Guide for Spinal Immobilization and Extrication (Spined) Device Characteristics |
ASTM D 3824 : 2012 : REDLINE | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
ASTM D 4913 : 2000 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
ASTM D 6212 : 1999 | Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry (Withdrawn 2008) |
ASTM F 1556 : 1994 : R2015 | Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics (Withdrawn 2024) |
ASTM F 1616 : 1995 : R2016 | Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings |
ASTM F 1296 : 2008 | Standard Guide for Evaluating Chemical Protective Clothing |
SPI B151.4 : 1999 | PLASTIC BLOWN FILM MACHINERY - MANUFACTURE, CARE & USE |
ASTM D 3961 : 1998 | Standard Test Method for Trace Quantities of Sulfur in Liquid Aromatic Hydrocarbons by Oxidative Microcoulometry (Withdrawn 2004) |
SAE J1782_201305 | Ship Systems and Equipment - Hydraulic Systems - Noise Control |
ASTM F 1555 : 1994 | Standard Guide for Characteristics for Extremity Splints |
ASTM D 4077 : 2017 : REDLINE | Standard Specification for Cumene (Isopropylbenzene) |
ASTM D 4471 : 2010-02 | TEST METHOD FOR PYRIDINE BASES IN CRESYLIC ACID BY DIRECT TITRATION |
ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
ASTM D 5211 : 2017 : REDLINE | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM F 1616 : 1995 : R2002 | Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings |
API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
AAMI TIR11:2005(R2015) | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
EN ISO 17349:2016 | Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO2 at high pressures (ISO 17349:2016) |
ASHRAE/ASHE 170 : 2017 | VENTILATION OF HEALTH CARE FACILITIES |
ANSI E1.39 : 2015 | ENTERTAINMENT TECHNOLOGY - SELECTION AND USE OF PERSONAL FALL ARREST SYSTEMS ON PORTABLE STRUCTURES USED IN THE ENTERTAINMENT INDUSTRY |
ASTM E 2517 : 2013 : REDLINE | Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer) |
FAA 3900.69 : 2016 | FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM |
TAPPI T 622 : 2010 | ANALYSIS OF SODIUM HYDROSULFITE |
SAE ARP 1796 : 2015 | ENGINE BLEED AIR SYSTEMS FOR AIRCRAFT |
ASTM D 2121 : 2016 : REDLINE | Standard Test Methods for Polymer Content of Styrene Monomer |
ASTM F 1558 : 1994 : R2002 | Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) |
O-M-232 Revision M:2016 | METHANOL (METHYL ALCOHOL) |
ANSI B11 TR5 : 2006 | SOUND LEVEL MEASUREMENT GUIDELINES |
IEEE N42.46-2008 | American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening |
SAE AMS3961/1 | 350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 38, Class 2, Grade 193, Style 3K-70-PW, Fiber 1 |
MIL-PRF-43001 Revision G:2016 | WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL |
GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
ASTM D 7536 : 2016 : REDLINE | Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
MIL-A-10840 Revision D:1982 | ARSENIC TRIOXIDE, TECHNICAL |
ASTM D 4493 : 2016 : REDLINE | Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol) |
AWWA D100 : 2011 | WELDED CARBON STEEL TANKS FOR WATER STORAGE |
ISA 12.12.03 : 2011 | STANDARD FOR PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS |
ANSI A10.49 : 2015 | CONTROL OF CHEMICAL HEALTH HAZARDS IN CONSTRUCTION AND DEMOLITION OPERATIONS |
I.S. EN 61511-2:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1 |
ASTM D 5317 : 1998 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
AAMI TIR56 : 2013 | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
BS EN ISO 17349:2016 | Petroleum and natural gas industries. Offshore platforms handling streams with high content of CO<sub>2</sub> at high pressures |
ASTM E 2625 : 2009 : R2017 | Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities |
AAMI TIR14 : 2016 | CONTRACT STERILIZATION USING ETHYLENE OXIDE |
DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
NASA KSC SPEC P 0025 : 2002 | PROPYLENE GLYCOL MONOMETHYL ETHER (PGME) 1-METHOXY-2-PROPANOL, SPECIFICATION FOR |
ASTM D 6046 : 2017-10 | CLASSIFICATION OF HYDRAULIC FLUIDS FOR ENVIRONMENTAL IMPACT |
ASTM D 4701:2000 | Standard Specification for Technical Grade Methylene Chloride |
ASTM F 860 : 2007 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
ASTM F 1764 : 1997 : R2002 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
NFPA 450 : 2017 | EMERGENCY MEDICAL SERVICES AND SYSTEMS |
BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
API MPM CH17.4 SPANISH : 2016 | Marine Measurement: Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB) |
MIL-A-21016 Revision F:1990 | ADHESIVE, RESILIENT DECK COVERING |
MIL-PRF-32548 Base Document:2016 | OCCUPANT SEAT BELT RESTRAINTS FOR USE IN U.S. MILITARY GROUND VEHICLES |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
ASTM D 5060 : 2012 : REDLINE | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM F 3272 : 2017 | Standard Guide for Selection, Care, and Use of Arc Protective Blankets |
ASTM D 6366 : 1999 | Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection (Withdrawn 2006) |
SAE AMS3961 | 350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs |
ASTM E 1429 : 1991 : R2004 | Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure (Withdrawn 2010) |
NACE SP 02 94 : 2006 | DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
ASTM D 5960 : 2003 | Standard Specification for Technical Grade Ethylene Dichloride |
API 2220 CHINESE : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
ASTM F 860 : 2007 : R2013 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
MIL-T-52809 Revision A:1986 | TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC |
API 2200 REDLINE : 2010 | REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
ASTM E 2657 : 2016 : REDLINE | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ANSI B11.11 : 2001 : R2012 | SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
MIL-A-14295 Revision C:1985 | ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
MIL-STD-1501 Revision F:2011 | Chromium Plating, Low Embrittlement, Electrodeposition |
IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
ASTM D 1631 : 2010 | Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
ASTM D 3504 : 1996 | Standard Specification for Maleic Anhydride |
UFC 4-740-20 : 2006 | UNIFIED FACILITIES CRITERIA - LIBRARIES |
API RP 2027 : 2002 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
A-A-1898 Revision D:2012 | CUSHIONING MATERIAL, CELLULOSIC, PACKAGING |
ASTM D 4579 : 2000 : R2017 | Standard Practice for Handling an Acid Degreaser or Still |
ASTM E 94/E94M : 2017 : REDLINE | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
MIL-PRF-32033 Revision A:2016 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE) |
ASTM E 94 : 2004 : R2010 | Standard Guide for Radiographic Examination |
ASTM D 4597 : 2010 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
MIL-B-24155 Revision B:1986 | BOILER SCALE REMOVING COMPOUND |
AWS C5.3 : 2000 | RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING |
ASTM F 1764 : 1997 : R2018 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
ANSI B11.8:2001(R2012) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
GG-B-675 Revision E:1988 | BREATHING APPARATUS, SELF-CONTAINED |
MIL-PRF-81298 Revision E:2011 | Dye, Liquid for the Detection of Leaks in Aircraft Fuel Systems |
MIL-PRF-12070 Revision E:1998 | FOG OIL |
NACE SP 01 81 : 2006 | LIQUID-APPLIED INTERNAL PROTECTIVE COATINGS FOR OILFIELD PRODUCTION EQUIPMENT |
API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API MPM CH8.3 : 1995(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
ANSI B11.11 : 2001 : R2007 | SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
API RP 2201 : 2003 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
ASTM F 1616 : 1995 | Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings |
API 2027 : 2002 : R2012 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
NACE TM 02 98 : 2015 | EVALUATING THE COMPATIBILITY OF FRP PIPE AND TUBULARS WITH OILFIELD ENVIRONMENTS |
API 580 REDLINE : 2009 | RISK-BASED INSPECTION |
IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API MPMS CHAPTER 17.2 : 1999(R2011) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
NACE SP 01 98 : 2016 | CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
IEEE 1679-2010 | IEEE Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications |
AWS D10.6/D10.6M : 2000 | RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING |
ASTM D 5960 : 2003 : R2008 | Standard Specification for Technical Grade Ethylene Dichloride |
IEEE 1493 : 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
ASTM D 1685 : 2005 | Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry (Withdrawn 2009) |
AAMI HE75 : 2009 | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
API MPMS CH17.4 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.4: METHOD FOR QUANTIFICATION OF SMALL VOLUMES ON MARINE VESSELS (OBQ/ROB) |
ASTM D 5395 : 2003 : R2013 | Standard Specification for Reclaimed Methylene Chloride |
ASTM F 2779 : 2010 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
ASTM E 1576 : 1999 | Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers (Withdrawn 2008) |
ANSI/ASSE Z10 : 2012(R2017) | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS |
ISO 27470:2011 | Aircraft ground equipment Upper deck catering vehicle Functional requirements |
ASTM F 1559 : 1994 : R2002 | Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) |
ISA 91.00.01 : 2001 | IDENTIFICATION OF EMERGENCY SHUTDOWN SYSTEMS AND CONTROLS THAT ARE CRITICAL TO MAINTAINING SAFETY IN PROCESS INDUSTRIES |
UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
ASTM E 1570 : 2011 : REDLINE | PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
ASTM D 1493 : 1997 | Standard Test Method for Solidification Point of Industrial Organic Chemicals (Withdrawn 2004) |
ASTM F 3145 : 2015 | Standard Guide for Swiftwater/Flood Rescue Technician Basic |
ASTM E 2693 : 2014 : REDLINE | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM F 1656 : 2001 | Standard Guide for Health and Safety Training of Oil Spill Responders in the United States (Withdrawn 2010) |
ASTM F 2462 : 2005 | Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems |
ASTM E 359 : 2017 : REDLINE | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
ASTM E 2077 : 2000 : R2005 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM F 953 : 2014 : REDLINE | Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing |
ASTM D 4913 : 2000 : R2016 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023) |
ASTM D 4490 : 1996 : R2001 : EDT 1 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
ASTM E 2889 : 2012 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM D 4913 : 2000 : R2005 : EDT 1 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
ASTM D 7881 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode |
ASTM D 6563 : 2012 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography (Withdrawn 2018) |
ASTM D 5836 : 2008 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
ASTM F 1453 : 1992 : R1996 | Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care |
ASTM F 2643 : 2015 : REDLINE | Standard Specification for Powered Pot, Pan and Utensil Washing Sinks |
ASTM E 2121 : 2013 : REDLINE | Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings |
API 583 : 2014 | CORROSION UNDER INSULATION AND FIREPROOFING |
ASTM D 7049 : 2017 : REDLINE | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
ASTM D 3797 : 2005 | Standard Test Method for Analysis of <i>o</i>-Xylene by Gas Chromatography (Withdrawn 2014) |
ASTM D 853 : 2004 | Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons (Withdrawn 2013) |
ASTM D 3760 : 2018 : REDLINE | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography |
API 1615 REDLINE : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
ASTM E 2077 : 2000 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
ASTM D 7057 : 2018 : REDLINE | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
ASTM E 1542 : 2018 : REDLINE | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 4490 : 1996 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
ASTM D 4579 : 2000 : R2006 | Standard Practice for Handling an Acid Degreaser or Still |
NFPA 1 : 2018 | FIRE CODE |
I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
ASTM E 848 : 1994 : R2012 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
ISO 17349:2016 | Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures |
EN 61511-2:2017 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
ISA RP92.06.02 : 1999 | INSTALLATION, OPERATION, AND MAINTENANCE OF CHLORINE DETECTION INSTRUMENTS (0.5-30 PPM FULL SCALE) |
ISA 92.02.01-1 : 1998 | PERFORMANCE REQUIREMENTS FOR CARBON MONOXIDE DETECTION INSTRUMENTS (50-1000 PPM FULL SCALE) |
PIP ARC01015 : 2014 | ARCHITECTURAL AND BUILDING UTILITIES DESIGN CRITERIA |
PIP PNC00005 : 2016 | DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
PIP STS05130 : 2011 | STRUCTURAL AND MISCELLANEOUS STEEL ERECTION SPECIFICATION |
PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
PIP STE05501 : 2017 | FIXED LADDERS AND CAGES DESIGN GUIDE |
PIP STE05530 : 2007 | GRATING DESIGN GUIDE |
ISA 92.02.01-1 : 1998 : R2007 | PERFORMANCE REQUIREMENTS FOR CARBON MONOXIDE DETECTION INSTRUMENTS (50-1000 PPM FULL SCALE) |
PIP STC01015 : 2017 | STRUCTURAL DESIGN CRITERIA |
ASME STS 1 : 2011 | Steel Stacks (STS-1 - 2011) |
PIP STF05511 : 2017 | FIXED INDUSTRIAL STAIRS |
ISA RP92.02.02-2 : 1998 | INSTALLATION, OPERATION, AND MAINTENANCE OF CARBON MONOXIDE DETECTION INSTRUMENTS (50-1000 PPM FULL SCALE) |
PIP STF05501 : 2017 | FIXED LADDERS AND CAGES FABRICATION DETAILS |
PIP RESR001 : 2010 | PACKAGED, SKID-MOUNTED INDUSTRIAL PROCESS REFRIGERATION SYSTEMS SPECIFICATION |
PIP STS05120 : 2011 | STRUCTURAL AND MISCELLANEOUS STEEL FABRICATION SPECIFICATION |
PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
PIP PCSPS001 : 2015 | PACKAGED EQUIPMENT INSTRUMENTATION SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.