MIL-DTL-24441 Revision D:2009
Current
The latest, up-to-date edition.
Paint, Epoxy-Polyamide, General Specification for
English
27-08-2009
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes a series of two component epoxy-polyamide paints designed to protect surfaces from environmental attack.
| DevelopmentNote |
Supersedes MIL P 24441 (B) (06/2004)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers a series of two component epoxy-polyamide paints designed to protect surfaces from environmental attack (see 6.1).
| MIL-STD-2199 Revision A:2010 | Coverings for Waterborne Main Propulsion Shafting on U.S. Naval Surface Ships and Submarines |
| MIL-DTL-1115 Revision E:2010 | Enamel, Interior, Alkyd, White (Formula No. 30) |
| MIL-PRF-3135 Revision H:2008 | Deck Covering Underlay Materials |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-24763 Revision B:2009 | Enamel, Emulsion Type, for Shipboard use |
| MIL-PRF-24712 Revision B:2014 | Coatings, Powder, Thermosetting |
| MIL-PRF-32171 Revision B:2009 | Deck Coatings, High Durability |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL-STD-2148 Revision A:2016 | Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL-STD-2003-2 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Equipment) |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| ASTM F 683 : 2014 : REDLINE | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| MIL-DTL-15090 Revision E:2010 | Enamel, Equipment, Light Gray (Navy Formula No.111) |
| MIL-PRF-24613 Revision A:2007 | Deck Covering Materials, Interior, Cosmetic Polymeric |
| MIL-PRF-24635 Revision E:2009 | Coating System, Weather-Resistant, Exterior Use |
| MIL-PRF-24176 Revision C:2004 | Cement, Epoxy, Metal Repair and Hull Smoothing (Metric) |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| UFC 4-213-10 : Change 1 | UNIFIED FACILITIES CRITERIA - DESIGN: GRAVING DRYDOCKS |
| MIL-PRF-24647 Revision E:2013 | Paint System, Anticorrosive and Antifouling, Ship Hull |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| CFR 40(PTS300-399) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| CFR 40(PT60) APPENDIX : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| CFR 40(PT63) : JUL 98 | NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES |
| ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4417 : 2014 : REDLINE | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| CFR 40(PTS260-299) : JUL 96 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| FED-STD-141 Revision D:2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| CFR 29(PTS1927-END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.