MIL-DTL-917 Revision F:2014
Current
The latest, up-to-date edition.
ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
English
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Appendix A - Procedure for insulation
suitability tests
Specifies the basic requirements applicable to the design, materials, and construction of naval shipboard electric power equipment (exclusive of communication equipment, information technology (IT) equipment, and combat systems [fire control and weapons control equipment]).
Committee |
FSC 6110
|
DevelopmentNote |
Supersedes MIL E 917 (E). (09/2014)
|
DocumentType |
Standard
|
Pages |
100
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
MIL-PRF-32272 Revision A:2016 | INTEGRATED POWER MANAGEMENT CENTER (IPMC) |
MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
MIL-PRF-17773 Revision D:2015 | SWITCH, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC |
MIL-DTL-15743 Revision F:2017 | SWITCHES, ROTARY, ENCLOSED |
MIL-DTL-32525 Base Document:2016 | MAGAZINE, PORTABLE (SHIPBOARD) |
MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
MIL-DTL-24646 Revision C:2015 | FUSE BOXES, GENERAL SPECIFICATION FOR |
MIL-STD-705 Revision D:2016 | MOBILE ELECTRIC POWER SYSTEMS |
MIL-DTL-15103 Revision G:2015 | SALINITY INDICATING EQUIPMENT |
MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
MIL-DTL-16392 Revision D:2015 | BRAKE, ELECTRO-MECHANICAL, NAVAL SHIPBOARD |
IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
MIL-DTL-23928 Revision G:2014 | PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE |
MIL-DTL-24347 Revision C:2015 | Monitor, Available Load, 60 and 400 Hertz, A.C., 1 Phase, Electrical Power (Naval Shipboard Use) |
MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
MIL-HDBK-251 Base Document:1978 | RELIABILITY/DESIGN THERMAL APPLICATIONS |
MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
MIL-I-24768-12 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN (PBM) |
NEMA MW 1000 : 2016 | MAGNET WIRE |
MIL-PRF-15160-61 Revision J:2017 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F61 |
MIL-DTL-28803-1 Revision E:2013 | DISPLAY, OPTOELECTRONIC, SEGMENTED READOUT, BACKLIGHTED, STYLE 2 (LIGHT EMITTING DIODE), RFI SHIELDED, MOISTURE SEALED, HIGH IMPACT SHOCK, TYPE R01 |
MIL-DTL-32258 Base Document:2007 | NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY |
SAE AS 81044/10 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, MEDIUM WEIGHT, 600-VOLT, 150 DEGREES C |
MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
IEEE C37.90-2005 | IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
MIL-HDBK-505 Base Document:1998 | Definitions of Item Levels, Item Exchangeability, Models, and Related Terms |
MIL-PRF-39006-22 Revision J:2012 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR79 |
MIL-DTL-16036 Revision M:2013 | SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
MIL-PRF-83401 Revision H:2006 | RESISTOR NETWORKS, FIXED, FILM AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED, FILM, RESISTORS, GENERAL SPECIFICATION FOR |
SAE AS 4536 : 2017 | SAFETY CABLE KIT PROCUREMENT SPECIFICATION AND REQUIREMENTS FOR USE |
NEMA WC 74 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
MIL-I-22129 Revision C:1962 | INSULATION TUBING, ELECTRICAL, POLYTETRAFLUOROETHYLENE RESIN, NONRIGID (SEE ASTM D 3295) |
MIL-PRF-15160-63 Revision F:2011 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F63 |
MIL-DTL-3971 Revision G:2016 | METERS, TIME TOTALIZING, NON-HERMETICALLY SEALED, ELECTRICAL: GENERAL SPECIFICATION FOR |
SAE AS 567 : 2015 | SAFETY CABLE, SAFETY WIRE, KEY WASHERS, AND COTTER PINS FOR PROPULSION SYSTEMS, GENERAL PRACTICES FOR USE OF |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
A-A-52082 Revision D:2009 | TAPE, LACING AND TYING, TFE-FLUOROCARBON |
FF-S-210 Revision B:1981 | SETSCREWS, SQUARE HEAD (INCH) AND SLOTTED HEADLESS (INCH AND METRIC) |
MIL-M-17059 Revision A:1965 | MOTOR, 60 CYCLE, ALTERNATING CURRENT, FRACTIONAL H.P. (SHIPBOARD USE) |
IEEE C37.013-1997 | IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
MS21208 Revision B:1969 | INSERT, SCREW THREAD, COARSE AND FINE, FREE RUNNING, HELICAL COIL, CRES |
MIL-PRF-19207 Revision G:2013 | Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for |
NEMA HP 4 : 2012 | ELECTRICAL AND ELECTRONIC FLUORINATED ETHYLENE PROPYLENE (FEP) INSULATED HIGH-TEMPERATURE HOOK-UP WIRE, TYPES KT (250 V), K (600 V) AND KK (1,000 V) |
MIL-STD-1683 Revision B:1989 | CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE |
MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
MIL-S-16032 Revision M:1987 | SWITCH & DETECTORS, SHIPBOARD ALARM SYSTEM |
IEEE 1018-2013 REDLINE | IEEE Recommended Practice for Specifying Electric Submersible Pump Cable--Ethylene-Propylene Rubber Insulation |
W-C-596-13 Revision E:2016 | CONNECTOR, PLUG, ELECTRICAL, GENERAL PURPOSE, HOSPITAL GRADE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ |
SAE AS 22759/47 : 2016 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, LIGHTWEIGHT, 80 MICROINCH SILVER-COATED HIGH-STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT, ROHS |
ASTM D 3638 : 2012 : REDLINE | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
MIL-T-16315 Revision D:1994 | TRANSFORMER, POWER, STEP DOWN (MISCELLANEOUS, NAVAL SHIPBOARD USE) (NAVY) |
NEMA HP 6 : 2013 | ELECTRICAL AND ELECTRONIC SILICONE AND SILICONE BRAIDED INSULATED, HOOK-UP WIRE, TYPES S (600 V), ZHS (600 V), SS (1000 V), ZHSS (1000 V), AND SSB BRAIDED (1000 V) |
A-A-52084 Revision C:2015 | Tape, Lacing and Tying, Aramid |
IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
MIL-I-24768-4 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-MAT, POLYESTER-RESIN (GPO N-1) |
MIL-C-24707-5 Base Document:1989 | CASTINGS, DUCTILE IRON AND AUSTENITIC DUCTILE IRON |
MIL-DTL-2212 Revision K:2014 | CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES |
MIL-M-24359 Base Document:1969 | METER, MILLIMETERS, DIRECT CURRENT PANEL MOUNTING (EDGEWISE TYPES) |
MIL-DTL-24643-68 Revision A:2010 | CABLE, ELECTRICAL, -20 DEGREES C TO +105 DEGREES C, 1000 VOLTS, TYPE LS4OW |
IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
MIL-DTL-24643-19 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LS6SGU |
MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
MIL-PRF-22710 Revision H:2013 | Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for |
MIL-DTL-24643-15 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSDSGU |
MIL-PRF-22 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR |
MS35335 Revision G:2004 | WASHER, LOCK, FLAT EXTERNAL TOOTH (IN./MM) |
MIL-PRF-5425 Revision E:1998 | PLASTIC SHEET, ACRYLIC, HEAT RESISTANT |
MIL-DTL-24643-17 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSFSGU |
MIL-I-24768-5 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-MAT, POLYESTER-RESIN (GPO N-2) |
MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
MIL-DTL-24643-50 Revision E:2009 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSFNW |
A-A-52083 Revision D:2015 | Tape, Lacing and Tying, Glass |
DOD-STD-1399-301 Revision A:1986 | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 301A SHIP MOTION AND ATTITUDE (METRIC) |
MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
MIL-DTL-16878-15 Revision B:2000 | WIRE, ELECTRICAL, CROSSLINKED, MODIFIED POLYETHYLENE (XLPE) INSULATED, 125 DEGREES C, 1000 VOLTS |
MIL-PRF-85045 Revision G:2014 | Cables, Fiber Optic, General Specification for |
MIL-DTL-17587 Revision C:2007 | CIRCUIT BREAKERS, ACB, LOW VOLTAGE, ELECTRIC POWER, AIR, REMOVABLE CONSTRUCTION, GENERAL SPECIFICATION FOR |
MIL-PRF-19500 Revision P:2010 | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
MIL-S-24561 Base Document:1977 | SENSING AND SIGNALING DEVICE, CURRENT-TIME (CTS) NAVAL SHIPBOARD USE |
ASTM B 456 : 2017 : REDLINE | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
MIL-G-3111 Revision C:1961 | GENERATOR, ELECTRIC DIRECT CURRENT NAVAL SHIPBOARD USE |
IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
SAE AS20708C : 2014(S2019) | SYNCHROS, GENERAL SPECIFICATION FOR |
SAE AS 81044/11 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, LIGHT WEIGHT, 600-VOLT, 150 DEGREES C |
MIL-PRF-81 Revision G:2017 | CAPACITOR, VARIABLE, CERAMIC DIELECTRIC, GENERAL SPECIFICATION FOR |
MIL-HDBK-225 Revision A:1991 | SYNCHROS DESCRIPTION AND OPERATION |
MIL-C-17588 Revision E:1985 | CIRCUIT BREAKERS (AUTOMATIC - ALB) AND SWITCH, TOGGLE (CIRCUIT BREAKER, NON AUTOMATIC - NIB) AIR, INSULATED HOUSING, 125 VOLTS AND BELOW AC OR DC (NAVAL SHIPBOARD USE) |
MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
MIL-PRF-15160-65 Revision F:2011 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F65 |
MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
MIL-DTL-28803 Revision C:2013 | DISPLAY, OPTOELECTRONIC, SEGMENTED READOUTS, BACKLIGHTED, GENERAL SPECIFICATION FOR |
MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
ASTM D 6779 : 2017 : REDLINE | Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
MIL-HDBK-802 Base Document:1990 | DESIGN OF ELECTRICAL EQUIPMENT WITH SMALL STRAY MAGNETIC FIELDS (METRIC) |
MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
MIL-DTL-21604 Revision G:2017 | Switches, Rotary, Multipole and Selector, General Specification for |
MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
MIL-HDBK-2164 Revision A:1996 | ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT |
MIL-I-24768-13 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN (FBE) |
MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
MIL-DTL-2726 Revision C:2006 | Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for |
IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
SAE AS 13572 : 2014 | SPRINGS, HELICAL, COMPRESSION AND EXTENSION |
SAE AS 81044/13 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, LIGHT WEIGHT, 600-VOLT, 150 DEGREES C |
MIL-E-22118 Revision B:1974 | ENAMEL, ELECTRICAL INSULATING |
MIL-DTL-5423 Revision E:2009 | BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR |
MIL-PRF-15160-62 Revision J:2017 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F62 |
MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
MIL-L-3661-59 Revision A:1971 | Lampholder, Lenses, Indicator Light, Style LC45 |
IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
MIL B 16392 : C | BRAKES, MAGNET, NAVAL SHIPBOARD |
IPC TM 650 : 0 | TEST METHODS MANUAL |
NASM17830:2017 | NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEGREES F AND 450 DEGREES F, NON-METALLIC INSERT, 300 SERIES CRES |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
MIL-DTL-24643-53 Revision F:2009 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 3000 VOLTS, TYPES LSSRW, LSDRW, AND LSTRW |
MIL-I-1361 Revision C:1985 | INSTRUMENT AUXILIARIES, ELECTRICAL MEASURING, SHUNTS, RESISTORS, AND TRANSFORMERS |
SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
MIL-HDBK-344 Revision A:1993 | ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT |
MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
MIL-I-24768-1 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GME) |
MIL-PRF-28750 Revision J:2017 | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR |
MIL-PRF-31032 Revision C:2016 | Printed Circuit Board/Printed Wiring Board, General Specification for |
MIL-DTL-3786-4 Revision M:2014 | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING, FLUX SEAL, STYLE SR04 |
MIL-STD-438 Revision E:1973 | SCHEDULE OF PIPING VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR SUBMARINES SERVICE |
MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
MIL-T-24388 Revision C:1990 | THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD) |
MIL-M-17556 Base Document:1953 | MOTOR, DIRECT CURRENT, FRACTIONAL HP (SHIPBOARD USE) |
MS21919 Revision E:1981 | CLAMP, LOOP TYPE, CUSHIONED, SUPPORT |
MIL-T-24387 Revision A:1973 | TEMPERATURE MEASUREMENT EQUIPMENT SIGNAL CONDITIONER AND POWER SUPPLY (ELECTRICAL) NAVAL SHIPBOARD USE |
MIL-P-24212 Revision C:1991 | PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL) |
MIL-R-19523 Revision B:1990 | RELAY, CONTROL, NAVAL SHIPBOARD |
MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
MIL-DTL-24643-18 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSMSCU (Including Variation LSMSCS) |
MIL-I-24768-6 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-MAT, POLYESTER-RESIN (GPO N-3) |
NASM33540:2003 | SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR |
MIL-DTL-3786 Revision J:2013 | SWITCHES, ROTARY (CIRCUIT SELECTOR, LOW-CURRENT CAPACITY), GENERAL SPECIFICATION FOR |
MIL-DTL-17361 Revision G:2006 | CIRCUIT BREAKER TYPES AQB/NQB, AIR, ELECTRIC, LOW VOLTAGE, INSULATED HOUSING (SHIPBOARD USE), GENERAL SPECIFICATION FOR |
MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
ASME Y14.24 : 2012 | TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
ASME Y14.34 : 2013(R2018) | ASSOCIATED LISTS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
ANSI/SAE Z26.1:1996 | SAFETY GLAZING MATERIALS FOR GLAZING MOTOR VEHICLES AND MOTOR VEHICLE EQUIPMENT OPERATING ON LAND HIGHWAYS - SAFETY STANDARD |
MIL-HDBK-338 Revision B:1998 | ELECTRONIC RELIABILITY DESIGN HANDBOOK |
MIL-I-19166 Revision C:1963 | INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE |
MIL-DTL-7788 Revision H:2011 | PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
ANSI/NEMA FI 1:2004 | Manufactured Electrical Mica |
MIL-L-23886 Revision C:1994 | LIQUID LEVEL INDICATING EQUIPMENT (ELECTRICAL) (NAVAL SHIPBOARD USE) |
SAE AMS 2460 : 2013 | PLATING, CHROMIUM |
MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
IEEE C37.46-2010 | IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches |
ANSI/NEMA FI 3:2004 | Calendered Aramid Papers Used for Electrical Insulation |
MIL-T-17221 Revision B:1973 | TRANSFORMER, POWER, DISTRIBUTION, SINGLE PHASE, 400 HERTZ, INSULATION SYSTEM CLASS 220 DEGREES C, DRY (AIR COOLER), NAVAL SHIPBOARD USE) |
MIL-I-24768-3 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEB) |
MIL-G-18473 Revision B:1978 | GENERATOR, MOTOR, AND AUXILIARY EQUIPMENT, DIRECT CURRENT, NAVAL SHIP PROPULSION |
MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
MIL G 3124 : D | GENERATOR, ALTERNATING CURRENT 60-HERTZ (NAVAL SHIPBOARD USE) |
MIL W 81381/22 : 0 | WIRE, ELECTRIC, FLUOROCARBON/POLYIMIDE INSULATED, MEDIUM WEIGHT, TIN COATED COPPER CONDUCTOR, 600 VOLTS, 150 DEGREES C NOMINAL 8.4 OR 15.4 MIL WALL |
MIL-I-24178 Base Document:1966 | INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD |
IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
SAE J 673 : 2015 | AUTOMOTIVE SAFETY GLAZING MATERIALS |
MIL-PRF-15160-66 Revision F:2011 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F66 |
ASTM D 2303 : 2013 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
A-A-55507 Revision B:2015 | CLIP, ELECTRICAL, FUSE GENERAL REQUIREMENTS FOR |
MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
MIL-PRF-27 Revision G:2014 | TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR |
NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
MIL-H-24592 Base Document:1979 | HOSE ASSEMBLY, TETRAFLUOROETHYLENE TUBE, NON-COLLAPSIBLE, HIGH TEMPERATURE |
MIL-Y-1140 Revision H:1972 | Yarn, Cord, Sleeving, Cloth, and Tape-Glass |
MIL-I-24768-11 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN (PBG) |
MIL-I-24768-16 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN (FBM) |
W-C-596-12 Revision F:2001 | Connector, Receptacle, Electrical, General Purpose, Deplex, General Grade and Hospital Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz |
NASM21250:2013 | BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12-POINT, 180 KSI FTU, 450 DEGREES F |
MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
IEEE C37.20.4-2013 | IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear |
NASM20995:2012 | WIRE, SAFETY OR LOCK |
MIL-PRF-17773 Revision D:2015 | SWITCH, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC |
MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
SAE AS 50151 : 2015 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
ASTM D 3935 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
IEC 61243-5:1997 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
SAE AS 22759/48 : 2016 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, LIGHTWEIGHT, 80 MICROINCH SILVER-COATED COPPER, 200 DEGREES C, 600 VOLT, ROHS |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
SAE AS 7928/1 : 2015 | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE 2 CLASS 1 FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE |
MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
MIL-PRF-32167 Revision A:2006 | TRANSIENT VOLTAGE SURGE SUPPRESSOR (TVSS) |
MIL-I-24768-17 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, SILICONE-RESIN (GSG) |
FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
MIL-V-23151 Revision B:1967 | VOLTMETER, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SHIPBOARD USE) |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
MIL-DTL-24643-51 Revision F:2009 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSMNW |
MIL-PRF-24236 Revision D:2006 | SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR |
MIL-STD-1399-300 Revision B:2008 | ELECTRIC POWER, ALTERNATING CURRENT |
IEEE C37.90.2:2004 | WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
IEC 62271-206:2011 | High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV |
MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
MIL-HDBK-299 Base Document:1989 | CABLE COMPARISON HANDBOOK DATA PERTAINING TO ELECTRIC SHIPBOARD CABLE |
SAE AS 81044 : 2011 | WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY |
MIL-M-17413 Revision A:1955 | MOTOR, DIRECT CURRENT, INTEGRAL H.P. NAVAL SHIPBOARD (NAVY) |
IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
MIL-I-24768-10 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN (PBE) |
MIL-PRF-15305 Revision F:2013 | COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
DOD STD 1399/532 : 0 | INTERFACE STANDARD FOR SHIPBOARD SYSTEM, SECTION 532, COOLING WATER FOR SUPPORT OF ELECTRONIC EQUIPMENT (METRIC) |
SAE AMS DTL 23053 : 1999 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
SAE AS 7928/2 : 2016 | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE 2, CLASS 1 FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE |
DOD-STD-1399-70-1 Base Document:1979 | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 070 - PART 1: D.C. MAGNETIC FIELD ENVIRONMENT (METRIC) |
MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
MIL-M-16125 Revision C:1963 | METERS, ELECTRICAL, FREQUENCY |
MIL-I-24768-14 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN (FBG) |
MIL-STD-1399-390 Base Document:1987 | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS - ELECTRIC POWER, DIRECT CURRENT, (OTHER THAN SHIP'S BATTERY) FOR SUBMARINES (METRIC) |
IEEE C37.47-2011 | IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches |
MIL-DTL-24643-48 Revision F:2009 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSDNW |
A-A-55507-2 Revision B:2015 | CLIP, ELECTRICAL, FUSE, P.C. BOARD, 15 AND 30 AMPERE, FOR FUSE DIAMETER 1/4 INCH |
A-A-59125 Revision B:2012 | Terminal Boards, Molded, Barrier Screw and Stud Types and Associated Accessories |
MIL-D-24304 Revision B:1988 | DIFFERENTIAL PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL) (NAVAL SHIPBOARD USE) |
MIL-DTL-24643-14 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSSSGU |
NASM17828:2013 | NUT, SELF-LOCKING, HEXAGON REGULAR-HEIGHT, (NON-METALLIC INSERT) 250 DEGREES F OR 450 DEGREES F, NICKEL-COPPER ALLOY |
FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
SAE AMS H 81829 : 1998 | HEAT TRANSFER FLUID, FLUOROCHEMICAL |
MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
NASM3926:2011 | KNOBS, CONTROL (FOR USE WITH ELECTRONIC, COMMUNICATIONS, AND ALLIED EQUIPMENT) |
MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
A-A-59770 Revision A:2007 | INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADHESIVE AND PRESSURE SENSITIVE THERMOSETTING ADHESIVE |
MIL-HDBK-198 Revision B:2012 | CAPACITORS, SELECTION AND USE OF |
A-A-55507-1 Revision C:2015 | CLIP, ELECTRICAL, FUSE, 30 AND 60 AMPERE, FOR FUSE DIAMETERS 1/4 INCH THRU 13/16 INCH |
FF-S-92 Revision C:2014 | SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD |
MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
MIL-P-15024-5 Base Document:1971 | PLATE, IDENTIFICATION |
MIL-PRF-38535 Revision K:2013 | Integrated Circuits (Microcircuits) Manufacturing, General Specification for |
W-C-596 Revision H:2014 | CONNECTOR, ELECTRICAL, POWER, GENERAL SPECIFICATION FOR |
MIL-DTL-24643-49 Revision F:2009 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSTNW |
MIL-DTL-713 Revision F:2009 | Twine, Fibrous: Impregnated, Lacing and Tying |
MIL-HDBK-267 Revision A:1987 | GUIDE FOR SELECTION OF LUBRICANTS & HYDRAULIC FLUIDS FOR USE IN SHIPBOARDS EQUIPMENT |
MIL-DTL-16878-16 Revision D:2011 | WIRE, ELECTRICAL, CROSSLINKED, MODIFIED POLYETHYLENE (XLPE) INSULATED, 125 DEGREES C, 3000 VOLTS |
MIL-PRF-15160-60 Revision K:2014 | Fuses, Instrument, Power, and Telephone (Nonindicating), Style F60 |
MIL-PRF-15160-64 Revision F:2011 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F64 |
MIL-DTL-24643-73 Revision A:2010 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSTCF |
NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
MIL-W-80 Revision C:1966 | WINDOW OBSERVATION ACRYLIC BASE ANTIELECTROSTATIC TRANSPARENT (FOR INDICATING INSTRUMENT) |
SAE AS 81044/9 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, MEDIUM WEIGHT, 600-VOLT, 150 DEGREES C |
SAE AS 21608 : 2012 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
MIL-DTL-2036 Revision E:2014 | ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
SAE AS 81044/12 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, LIGHT WEIGHT, 600-VOLT, 150 DEGREES C |
MIL-I-15265 Revision C:1992 | INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) |
NASM17829:2012 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEGREES F, NON-METALLIC INSERT, NON-CRES STEEL |
MIL-DTL-15743 Revision F:2017 | SWITCHES, ROTARY, ENCLOSED |
MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
MIL-PRF-21038 Revision F:2004 | TRANSFORMERS, PULSE, LOW POWER GENERAL SPECIFICATION FOR |
MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL-DTL-24643-16 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSTSGU |
A-A-59781 Base Document:2005 | LIGHT EMITTING DIODES FOR USE AS INDICATOR LIGHTS |
MIL-DTL-15291 Revision G:2013 | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
MIL-I-3505 Revision C:1960 | INSULATION SHEET AND TAPE, ELECTRICAL, COIL AND SLOT, HIGH TEMPERATURE |
SAE AS 22759/50 : 2015 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED COPPER 200 DEGREES C, 600 VOLT, ROHS |
MIL-HDBK-199 Revision C:2013 | Resistors, Selection and Use of |
NASM8975:2011 | FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CRES, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR |
MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
MIL-PRF-15160 Revision K:2013 | Fuses, Instrument, Power, and Telephone General Specification for |
MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
MIL-PRF-32150 Revision B:2013 | STATIC AUTOMATIC BUS TRANSFER SWITCH (SABT) ON SURFACE AND SUBMARINE NAVAL VESSELS |
MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
MIL-I-631 Revision D:1961 | INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID |
MIL-PRF-10304 Revision F:1999 | METERS, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED, GENERAL SPECIFICATION FOR |
ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
MIL-T-15108 Revision C:1975 | TRANSFORMERS, POWER, STEP DOWN, SINGLE PHASE, 60 HERTZ, 1 KILOVOLTAMPERE APPROXIMATE MINIMUM RATING, DRY TYPE, NAVAL SHIPBOARD |
IPC 2223 : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
MIL-STD-1399-680 Base Document:2008 | HIGH VOLTAGE ELECTRIC POWER, ALTERNATING CURRENT |
MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
MIL-STD-681 Revision F:2012 | IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE |
IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
SAE AS 81044/8 : 2011 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, MEDIUM WEIGHT, 600-VOLT, 150 DEGREE C |
TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
MIL-S-22432 Revision A:1990 | SERVOMOTOR, GENERAL SPECIFICATION |
MIL-DTL-24643-67 Revision A:2010 | CABLE, ELECTRICAL, -20 DEGREES C TO +105 DEGREES C, 1000 VOLTS, TYPE LS3OW |
MIL-DTL-39024 Revision C:2014 | JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR |
MIL-D-23140 Revision D:1992 | DRAWINGS, INSTALLATION CONTROL, FOR SHIPBOARD ELECTRONIC EQUIPMENT |
A-A-55507-3 Base Document:2004 | CLIP, ELECTRICAL, FUSE, P.C. BOARD, UP TO 15 AMPERE, FOR FUSE DIAMETER 5 MM |
IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
MIL-DTL-24643-20 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LS7SGU |
DOD-STD-2143 Base Document:1983 | MAGNETIC SILENCING REQUIREMENTS FOR THE CONSTRUCTION OF NONMAGNETIC SHIPS AND CRAFTS (METRIC) |
MIL-DTL-24643-72 Revision A:2010 | CABLE, ELECTRICAL, -20 DEGREES C TO +90 DEGREES C, 1000 VOLTS, TYPE LSFCF |
MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
NEMA HP 3 : 2012 | INSULATED HIGH TEMPERATURE HOOK-UP WIRE; TYPES ET (250 VOLTS), E (600 VOLTS), AND EE (1000 VOLTS) |
NASM 21209 : 2003 | INSERT, SCREW THREAD, COARSE AND FINE, SCREW LOCKING, HELICAL COIL, CRES |
MIL-DTL-15109 Revision D:2001 | RESISTORS AND RHEOSTATS, NAVAL SHIPBOARD |
SAE AS 22759/49 : 2015 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED HIGH-STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT, ROHS |
MIL-I-24768-8 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GMG) |
MIL-DTL-24643-22 Revision E:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 5,000 Volts, Type LS5KVTSGU (Including Variation LS5KVTSGUS) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.