MIL-DTL-16036 Revision M:2013
Current
Current
The latest, up-to-date edition.
Switchgear, Power, Low Voltage, Naval Shipboard
Available format(s)
PDF
Language(s)
English
Published date
07-03-2013
Publisher
£13.91
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - APPENDIX FOR DRAWING TECHNICAL
REQUIREMENTS
Gives the requirements for electrical power dead-front, deck-mounted, low voltage switchgear for Naval shipboard use.
| DevelopmentNote |
Supersedes MIL S 16036 (K) (02/2006)
|
| DocumentType |
Standard
|
| Pages |
97
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for electrical power dead-front, deck-mounted, low voltage switchgear for Naval shipboard use.
| MIL-DTL-32529 Base Document:2015 | Power Electronic Conversion Equipment, Naval Shipboard |
| MIL-PRF-32150 Revision B:2013 | Static Automatic Bus Transfer (SABT) Switch on Surface and Submarine Naval Vessels |
| MIL-PRF-17773 Revision D:2015 | Switch, Bus Transfer, Electric Power, Automatic |
| MIL-STD-2003-1 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Cable) |
| MIL-DTL-32485 Base Document:2013 | Circuit Breakers, Vacuum Type(VCB), Electric Power, Medium Voltage, Alternating Current, Draw-Out Removable Construction, Without Internal Overcurrent Protection |
| MIL-STD-2003-2 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Equipment) |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL-DTL-17587 Revision C:2007 | Circuit Breakers, ACB, Low Voltage, Electric Power, Air, Removable Construction, General Specification for |
| MIL-F-21346 Revision B:1976 | Fuseholders, Block, and Shroud Type, and Associated Fuse Clips; General Specification for (No S/S Document) |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| MIL-PRF-19207-23 Revision M:2014 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Type FHL34W |
| MIL-W-19088 Base Document:1955 | Wattmeters, Switchboard Type, 4-1/2 INCH |
| ASTM D 709 : 2017 : REDLINE | Standard Specification for Laminated Thermosetting Materials |
| MIL-PRF-19207 Revision G:2013 | Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for |
| MIL M 16034 : A | METER, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES) |
| MIL-T-16315 Revision D:1994 | Transformers, Power, Step-Down (Miscellaneous, Naval Shipboard Use) |
| NEMA HP 6 : 2013 | ELECTRICAL AND ELECTRONIC SILICONE AND SILICONE BRAIDED INSULATED, HOOK-UP WIRE, TYPES S (600 V), ZHS (600 V), SS (1000 V), ZHSS (1000 V), AND SSB BRAIDED (1000 V) |
| MIL-DTL-2212 Revision K:2014 | Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| MIL-HDBK-46855 Revision A:1999 | Human Engineering Program Process and Procedures (S/S by MIL-STD-46855) |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| MIL-DTL-24552 Revision B:2001 | Terminals and Seals, Plugs and Switch, Casualty Power Systems, Receptacle Type, |
| MIL-C-17588 Revision E:1985 | Circuit Breakers (Automatic - ALB-1) and Switch, Toggle (Circuit Breaker, Non-Automatic - NLB-1) Air, Insulated Housing, 125 Volts and Below A.C. and D.C., (Naval Shipboard Use) |
| MIL-S-16104 Revision B:1983 | Synchroscope |
| MIL-DTL-28803 Revision C:2013 | Display, Optoelectronic, Segmented Readouts, Backlighted, General Specification for |
| MIL-DTL-21604 Revision G:2017 | Switches, Rotary, Multipole and Selector; General Specification for |
| MIL-DTL-21604-5 Revision E:2017 | Switch, Rotary, Multipole and Selector, 10 Ampere, Style JR |
| MIL-R-24563 Base Document:1977 | Relay, Alternating Current, Power-Sensing |
| MIL-S-24188 Base Document:1965 | Synchronizing Control Equipment, 60 Cycles, 450 Volts, Naval Shipboard |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| MIL-E-22118 Revision B:1974 | Enamel, Electrical-Insulating |
| A-A-59125-2 Base Document:1997 | Terminal Boards, Molded, Barrier Screw Type, Class 38TB |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-PRF-19207-1 Revision K:2013 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Types FHL10U and FHL10G |
| DOD STD 2003 : 0 | ELECTRIC PLANT INSTALLATION - STANDARD METHODS FOR SURFACE SHIP AND SUBMARINES |
| MIL-PRF-19207-21 Revision M:2014 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Non-EMI/RFI Shielded and EMI/RFI Shielded, Type FHL32W and Type FHL32WS |
| MIL-I-1361 Revision C:1985 | Instrument Auxiliaries, Electrical Measuring: Shunts, Resistors, and Transformers |
| MIL-PRF-28750 Revision J:2017 | Relays, Solid State, General Specification for |
| MIL-L-3661-38 Revision A:1968 | Housing, Indicator-Light, Style LH80 |
| MIL-R-19523 Revision B:1990 | Relays, Control |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-R-2729 Revision D:1992 | Regulator-Exciter Systems, Voltage, A.C. Generator, Naval Shipboard Use |
| A-A-59125-9 Base Document:1997 | Terminal Boards, Molded, Barrier Stud Type, Class 3TB |
| MS17832 Revision A:1970 | Operating Wrench, Bus Disconnect Symbol 1485 |
| MIL-I-3158 Revision D:1968 | Insulation Tape, Electrical Glass-Fiber (Resin-Filled): and Cord, Fibrous-Glass |
| MIL-PRF-19207-24 Revision M:2014 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Non-EMI/RFI Shielded and EMI/RFI Shielded, Type FHL35W and Type FHL35WS |
| MIL C 17587 : B | CIRCUIT BREAKER, LOW VOLTAGE, ELECTRIC POWER, AIR, OPEN FRAME, REMOVABLE CONSTRUCTION |
| A-A-208 Revision C:2012 | Ink, Marking, Stencil, Opaque (Porous and Non-Porous Surfaces) |
| MIL-DTL-16878 Revision H:2012 | Wire, Electrical, Insulated, General Specification for |
| MS17831 Revision C:1968 | Bus Disconnect, Quick Opening Symbol 1484 |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
| MIL-V-23151 Revision B:1967 | Voltmeter, Expanded Scale Switchboard Type (Naval Shipboard Use) |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-STD-108 Revision E:1966 | Definitions of and Basic Requirements for Enclosures for Electric and Electronic Equipment |
| MIL-M-16125 Revision C:1963 | Meters, Electrical, Frequency |
| MIL-PRF-19207-3 Revision L:2017 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Types FHL12U and FHL12G |
| MIL C 17361 : F | CIRCUIT BREAKERS, AIR, ELECTRIC, INSULATED HOUSING (SHIPBOARD USE) |
| A-A-59125 Revision B:2012 | Terminal Boards, Molded, Barrier Screw and Stud Types and Associated Accessories |
| MIL-T-15377 Revision F:1979 | Temperature Monitor Equipment Naval Shipboard (S/S by ASTM-F2362) |
| MIL-PRF-19207-5 Revision L:2013 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Type FHL14G |
| DOD S 17773 : B | SWITCHES, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC AND MANUAL (METRIC) |
| MIL-PRF-19207-22 Revision L:2014 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Type FHL33W |
| MIL-DTL-24552-2 Revision B:2001 | Terminals and Seals, Plugs and Switch, Casualty Power, Receptacle Type, Upper and Lower Riser, 200-Ampere, 450-Volt, Alternating Current, Three-Phase, Symbol No. 1047 |
| MIL-P-15024-5 Base Document:1971 | Plate, Identification |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-STD-1671 Base Document:1975 | SCHEMATIC WIRING DIAGRAM (EXTERNAL DC POWER CONNECTOR, AIRCRAFT) (NO S/S DOCUMENT) |
| A-A-59781 Base Document:2005 | Light Emitting Diodes for use as Indicator Lights |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| MIL-I-24391 Revision C:1990 | Insulation Tape, Electrical, Plastic, Pressure-Sensitive |
| MIL-DTL-24552-1 Revision B:2001 | Terminals and Seals, Plugs and Switch, Casualty Power, Receptacle Type, Back Connected 200 Ampere, 450-Volt, Alternating Current, Three-Phase, Symbol No. 1046 |
| MIL-PRF-15160 Revision K:2013 | Fuses, Instrument, Power, and Telephone General Specification for |
| MIL-DTL-15090 Revision E:2010 | Enamel, Equipment, Light Gray (Navy Formula No.111) |
| MIL-I-631 Revision D:1961 | Insulation, Electrical, Synthetic - Resin Composition, Nonrigid |
| MIL-PRF-19207-2 Revision J:2013 | Fuseholders, Extractor Post Type, Blown Fuse Indicating, Types FHL11U and FHL11G |
| MIL-T-15108 Revision C:1975 | Transformers, Power, Step Down, Single-Phase, 60 Hertz, 1-Kilovoltampere Approximate Minimum Rating, Dry Type, Naval Shipboard |
| MIL-I-16103 Revision F:1983 | Indicator, Phase Sequence, Switchboard and Panel |
| TT-C-490 Revision F:2013 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| MIL-DTL-15109 Revision D:2001 | Resistors and Rheostats, Naval Shipboard |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.