MIL-PRF-32490 Base Document:2014
NA
Status of Standard is Unknown
Additive, Lubricity Improver, Distillate Fuel
03-02-2014
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - NAVAL COALESCENCE TEST (NCT)
Specifies the requirements for two grades of diesel lubricity improver additives that are used in naval distillate fuels conforming to MIL-DTL-16884.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
This specification covers three grades of lubricity improver additives that are used in naval distillate fuels conforming to MIL-DTL-16884. Grade A and B additives are used either in finished fuel from a supplier, or to be stored as a neat product in Department of Defense (DoD) facilities. Grade C additives are used in finished fuel provided by suppliers of MIL-DTL-16884 and are not stored as a neat product in DoD facilities.
| MIL-DTL-16884 Revision P:2017 | Fuel, Naval Distillate |
| ASTM D 7111 : 2016 : REDLINE | Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| MIL-PRF-17331 Revision K:2013 | Lubricating Oil, Steam Turbine and Gear, Moderate Service |
| ASTM D 5950 : 2014 : REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| MIL-DTL-16884 Revision P:2017 | Fuel, Naval Distillate |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| MIL-PRF-9000 Revision L:2014 | Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-DTL-32353 Revision A:2012 | Hydraulic and Lubricating Oil, Synthetic Hydrocarbon Base |
| ASTM D 5949 : 2016 : REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.