MIL-PRF-2104 Revision K:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service
English
15-01-2016
25-04-2017
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - TEST METHODS FOR THE DETERMINATION
OF FUEL CONSUMPTION IMPROVEMENT
APPENDIX B - TEST METHOD FOR THE HIGH
TEMPERATURE DURABILITY REQUIREMENT
Specifies lubricating oils suitable for lubrication of all reciprocating compression-ignition internal combustion engines (with the exception that the 10 W grade should not be used in high output 2-cycle engines) and for power transmission fluid applications in combat/tactical service equipment.
| DevelopmentNote |
Supersedes MIL L 2104 (F) (04/2004)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This performance specification covers lubricating oils suitable for lubrication of reciprocating compression-ignition internal combustion engines and for power transmission fluid applications in combat/tactical service equipment (see 6.1). These lubricants are formulated using highly refined mineral oils.
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL-PRF-32558 Base Document:2016 | Blast Sensing and Blast Data Recording Systems for Use in U.S. Military Ground Vehicles |
| MIL-PRF-46167 Revision D:2005 | Lubricating Oil, Internal Combustion Engine, Arctic |
| MIL-DTL-11603 Revision G:1998 | Transmission, Cross-Drive, CD850 Series |
| ASTM D 7320 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE 3G, SPARK-IGNITION ENGINE |
| MIL-STD-3003 Revision B:2007 | Vehicles, Wheeled: Preparation for Shipment and Storage of |
| MIL-DTL-53133 Revision C:2002 | Generator Sets, Skid Mounted, Tactical, Quiet, Diesel Engine Driven, Alternating Current 5 through 60 Kilowatts, General Specification for |
| MIL-DTL-32496 Base Document:2014 | Generator Sets, Skid Mounted, Trailer Mounted Advanced Medium-Sized Mobile Power Sources, Tactical Diesel Fuel Driven, Alternating Current 5 through 60 Kilowatts General Specification for |
| MIL-PRF-32490 Base Document:2014 | Additive, Lubricity Improver, Distillate Fuel |
| MIL-PRF-53024 Revision C:2012 | Compactor, High Speed, Self-Propelled, Commercial Construction Equipment (CCE) |
| MIL-DTL-62006 Revision C:1998 | Cooler, Oil: Transmission and Engine |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| MIL-DTL-62177 Revision E:1998 | Engine, Detail: 12 Cylinder, 90 Degree V-Type, 750 H.P. AVDS1790-2, AVDS1790-2A, AVDS1790-2C, AVDS1790-2D, AVDS1790-2DR, AVDS1790-2CA, and AVDS1790-2DA |
| MIL-DTL-62483 Revision A:1998 | Engine, Diesel, 6 Cylinder, In-Line, Liquid Cooled, 210 HP |
| MIL-DTL-13444 Revision H:2006 | Hose and Hose Assemblies, Rubber: Fuel and Oil |
| SAE J183_201708 | Engine Oil Performance and Engine Service Classification (Other than \"Energy Conserving\") |
| MIL-DTL-85405 Revision A:1997 | TRAILER, MUNITIONS, MHU-185/M |
| MIL-PRF-26139 Revision E:2015 | Tester, Pressurized Cabin Leakage, Aircraft, (AF/M24T-3 and AF/M32T-1) |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-PRF-32090 Revision A:2016 | Delivery System, Aerial, Bulk Fuel |
| MIL-STD-40051-2 Revision C:2015 | Preparation of Digital Technical Information for Page-Based Technical Manuals (TMs) (S/S By MIL-STD-40051E) |
| MIL-PRF-53051 Revision C:2017 | Pumping Assemblies, Wheel-Mounted, Diesel Engine Driven, Bulk Transfer, Fuel and Potable Water Pumping Service |
| MIL-PRF-32306 Base Document:2008 | Hose Assembly, Preformed Flexible, Vibration and Motion Isolation (No S/S Document) |
| MIL-DTL-62186 Revision C:2009 | Generator, Alternating Current (650 Ampere Rectified), 28 Volts Direct Current (Oil Cooled) |
| MIL-DTL-62462 Revision D:1998 | Engine, Diesel, Liquid-Cooled, 8 Cylinder; 4 Cycle, V-Type, 220 KW (295 HP) |
| SAE J304_201606 | Engine Oil Tests |
| SAE J2361_199811 | Lubricating Oil, Internal Combustion Engine, Preservation Break-In |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| MIL-DTL-62270 Revision B:1998 | Chassis, Tank: Armored Vehicle Bridge Launcher, M48A5 |
| MIL-DTL-52471 Revision F:2008 | Hose and Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification for |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| MIL-DTL-62099 Revision D:1998 | Transmission, Hydraulic: Modified Automatic TX-100-1 |
| MIL-DTL-62030 Revision E:1998 | Transmission, Hydraulic, Model XTG-250-1A |
| MIL-PRF-62122 Revision E:2011 | Cable, Assembly, Inter-Vehicle Power: Plug, Receptacle, and Adapter |
| MIL-DTL-62461 Revision E:1998 | Transmission Assembly |
| ASTM D 6618 : 2016 : REDLINE | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| MIL-STD-633 Revision G:2013 | Standard Family of Mobile Electric Power Generating Sources General Description Information and Characteristic Data |
| MIL-STD-40051-1 Revision C:2015 | Preparation of Digital Technical Information for Interactive Electronic Technical Manuals (IETMs) (S/S by MIL-STD-40051E) |
| MIL-DTL-46796 Revision D:2010 | Engine, Diesel: 8 Cylinder, V-Type 390 to 440 H.P. |
| F-F-351 Revision F:1999 | Filters and Filter Elements, Fluid Pressure: Lubricating Oil, Bypass and Full Flow |
| MIL-PRF-32548 Base Document:2016 | Occupant Seat Belt Restraints for Use in U.S . Military Ground Vehicles |
| MIL-PRF-71168 Revision A:2000 | Cartridge, 7.62MM, XM974 Tracer Short Range Training Ammunition (S/S by MIL-PRF-71167) |
| MIL-PRF-32470 Base Document:2013 | Truck, Forklift, 10,000 Lb Capacity, Variable Reach, Rough Terrain |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| MIL-PRF-32317 Base Document:2009 | Cartridge, 7.62MM: Armor Piercing - M993 |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ASTM D 5800 : 2015-04 | TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING OILS BY THE NOACK METHOD |
| ASTM D 6681 : 2017 : REDLINE | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
| ASTM D 6922 : 2013-05 | TEST METHOD FOR DETERMINATION OF HOMOGENEITY AND MISCIBILITY IN AUTOMOTIVE ENGINE OILS |
| ASTM D 7468 : 2016 : REDLINE | TEST METHOD FOR CUMMINS ISM TEST |
| ASTM D 5950 : 2014 : REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| SAE J300_201501 | Engine Oil Viscosity Classification |
| ASTM D 5481 : 2013 : REDLINE | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| ASTM D 6417 : 2015 : REDLINE | Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D 4485 : 2017-03 | SPECIFICATION FOR PERFORMANCE OF ACTIVE API SERVICE CATEGORY ENGINE OILS |
| ASTM D 5949 : 2016 : REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| ASTM D 7320 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE 3G, SPARK-IGNITION ENGINE |
| ASTM D 6594 : 2014 : REDLINE | TEST METHOD FOR EVALUATION OF CORROSIVENESS OF DIESEL ENGINE OIL AT 135 DEGREES C |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.