MIL-DTL-52471 Revision F:2008
Current
Current
The latest, up-to-date edition.
Hose and Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification for
Available format(s)
PDF
Published date
04-12-2008
Publisher
£13.91
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies pressure-type, wire-reinforced, rubber, hydraulic hose and hose assemblies.
| DevelopmentNote |
Supersedes MIL H 52471. (10/2003)
|
| DocumentType |
Standard
|
| Pages |
70
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers pressure-type, wire-reinforced, rubber, hydraulic hose and hose assemblies. The core of this specification uses SAE-J517. The operating pressures range between 625 psi to 7,500 psi (4.3 to 48.3 MPa). The operating temperature range is -40°F to +212°F (-40°C to 100°C).
| MIL-DTL-52471-10 Revision B:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-35 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-52525-32 Revision A:2008 | Fittings, Hose, Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-44 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MIL-DTL-52525-43 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-52525-38 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-52471-1 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 1001R1, Single-Wire Braided Reinforcement Hose |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| MIL-DTL-52525-36 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent Tube |
| MIL-DTL-52525-15 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 90 Degree Bent Tube |
| MIL-DTL-52525-13 Revision C:2008 | Fittings, Hose, Crimp Type, Split-Flange Straight |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52525-34 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MIL-DTL-52471-5 Revision C:2008 | Hose, Rubber, Hydraulic Pressure-Type, Type 100R2 Double-Wire-Braided Reinforcement Hose |
| MIL-DTL-52525-9 Revision C:2008 | Fittings, Hose, Screw-On to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52471-4 Revision C:2008 | Hose, Rubber, Hydraulic Pressure-Type, Type 100R1 Single-Wire-Braided Reinforcement Hose |
| MIL-DTL-52525-17 Revision C:2008 | Fittings, Clamp-Halves, Flange to Port, for 4-Bolt Split-Flange |
| MIL-DTL-52525-31 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare, Female Swivel |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| MIL-DTL-52471-7 Revision B:2008 | Hose, Rubber, Hydraulic Pressure-Type, Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52471-8 Revision B:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE |
| MIL-DTL-52525-37 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52471-2 Revision C:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100R2, Double-Wire Braided Reinforcement Hose |
| MIL-DTL-52471-3 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100RE, Four-Wire Braided Reinforcement or Multiple Wire Braided Steel Wire Reinforced Hose |
| MIL-DTL-52525-45 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 90 Degree Bent Tube |
| MIL-DTL-52525-39 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| MIL-DTL-52525-14 Revision C:2008 | Fittings, Hose Crimp Type, Split-Flange 45 Degree Bent |
| MIL-DTL-52525-41 Revision A:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube |
| MIL-DTL-52525-42 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-52525-33 Revision A:2008 | Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-40 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MIL-DTL-52471-9 Revision B:2008 | Hose, Rubber: Hydraulic Pressure-Type; Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| SAE J517_201612 | Hydraulic Hose |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| SAE J1475_201406 | Hydraulic Hose Fitting for Marine Applications |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| SAE J343_201605 | Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| SAE J1942_201406 | Hose and Hose Assemblies for Marine Applications |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.