• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AS 1424 : 2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE

Available format(s)

Hardcopy , PDF

Superseded date

11-04-2020

Language(s)

English

Published date

01-01-2014

1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

Specifies medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for operation in pneumatic systems up to 800 degrees F with excursion to 1200 degrees F for Class 'B' and 'N' and primarily for use on jet aircraft power plants.

Committee
G-3
DocumentType
Standard
Pages
21
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

SAE AS 150 : 2017 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
SAE AMS 5663 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5662 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
SAE AMS 5581 : 2010 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED TUBING, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), ANNEALED
NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE AS 4370 : 2016 NUT, FITTING, RETAINED
SAE AMS 5599 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED
SAE AMS 5571J:2012(R2018) STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
AN818 Revision 20:2010 NUT, TUBE COUPLING, SHORT
SAE AS 4395 : 2013 FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
MIL-HDBK-831 Revision A:2013 PREPARATION OF TEST REPORTS
SAE AMS 2759 : 2014 HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
SAE AMS 5832 : 2015 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED
AWS A5.14 : 1989 NICKEL AND NICKEL-ALLOY BARE WELDING RODS AND ELECTRODES, SPECIFICATION FOR,
SAE ARP 908 : 2013 TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
SAE AS 7003 : 2008 NADCAP PROGRAM REQUIREMENTS
SAE AS 7112 : 1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS
SAE AMS 5510S : 2014 STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED
SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
SAE AS 85421 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR
SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
AWS D17.1 : 2001 SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE AMS 5589 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED
SAE AMS 5570 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AS 21921 : 2010 NUT, SLEEVE COUPLING, FLARELESS
AWS A5.9 : 93(R1999) BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR
SAE AS 4375 : 2013 FITTING END, FLARELESS, DESIGN STANDARD
SAE AMS 5837G : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB)
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
SAE AMS 5666H : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED
SAE AMS 5680 : 2011 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347)
SAE AMS 5556 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
NAS847:2012 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL
SAE AMS 5557 : 2012 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED

View more information
£119.88
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.