• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS QQ S 763D : 2013(S2015)

Current

Current

The latest, up-to-date edition.

STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-03-2015

1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES

This specification covers corrosion-resistant steel bars, wire, shapes, and forgings.

Standards Relationship
QQ-S-763 Revision F:1996 Similar to

SAE AS 4468 G : 2017 HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
MIL-DTL-24704 Revision B:2011 Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for
MIL-DTL-3922-75 Revision D:2013 Flanges, Waveguide, Reduced Height
AN915 Revision 14:2015 ELBOW, PIPE, 45 DEGREES
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
17/30369678 DC : 0 PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS
MS27086 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
MS27087 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
MIL-DTL-15743-9 Revision C:2007 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 839.1 (4PDT), 848.1 (TPDT), AND 2752.1 (SPECIAL)
MIL-DTL-3655 Revision D:2004 Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for
BS ISO 7169:2014 Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric
AN849 Revision 13:2015 NIPPLE, HOSE
AN838 Revision 9:2011 Elbow, Tube to Hose, 90 Degrees
SAE AS18280H:2021 Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi
MS27077 Revision D:2014 FLANGE, SWIVEL, RETAINING
AN815 Revision 10:2015 UNION - FLARED TUBE
MS27076 Revision E:2013 Nipple, Straight, Swivel Flange
AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
MIL-DTL-16356 Revision E:2013 GAUGES, DIRECT READING, OBLONG GLASS
MIL-PRF-23145 Revision C:2018 Inflation Assemblies, Life Preserver
MIL-DTL-3922-67 Revision E:2013 Flanges, Waveguide (Contact) (Round, 4 Hole) (Millimeter)
PREN 3778 : 200P1 AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, DOUBLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL
PREN 6068 : 200P2 AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE
SAE AS 4623 : 2016 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
NASM 21083 : 2004 NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F
SAE AS 50151 : 2015 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
ASTM F 2332 : 2006 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
SAE AS 95234A : 2020 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
MIL-DTL-45952 Revision A:2014 PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR
MIL-DTL-87104 Revision C:2014 COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR
MIL-DTL-24694 Revision A:2011 VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC)
MIL-DTL-25579 Revision H:2014 Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
MIL-STD-2003-4 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS)
A-A-59590 Revision D:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-11996 Revision C:2015 HANDSETS, GENERAL SPECIFICATION FOR
MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
A-A-59789 Revision B:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MS27082 Revision E:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
AN841 Revision 7:2013 ADAPTER - HOSE TO FLARED TUBE
MIL-C-83522-1 Revision F:2006 CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STEP-DOWN NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER
BS IEC 63004:2015 Standard for receiver fixture interface
MIL-DTL-24749 Revision B:2014 GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC
MIL-C-83522-7 Revision C:2006 CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, PARALLEL PC MOUNT
A-A-59950 Base Document:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-24695 Revision C:2012 VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR
MIL-DTL-28837 Revision D:2015 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
AN844 Revision 13:2013 ELBOW - PIPE TO HOSE, 45 DEGREES
MIL-DTL-83522-16 Revision C:2013 Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy
AN807 Revision 7:2007 Adapter, Straight, Tube to Hose
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
PREN 3776 : 200P1 AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, SINGLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL
SAE AS 620 : 2012 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT
SAE ARP 81490 : 2016 TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE
SAE AS 1975 : 2016 Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems
IEC 63004:2015 Standard for receiver fixture interface
MIL-DTL-5015 Revision H:2000 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
DSCC 84103 : J HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL-DTL-26482 Revision H:2007 Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
MS27075 Revision D:2013 NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MS27071 Revision D:2013 UNION, NIPPLE
MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
MIL-DTL-3928 Revision H:2016 SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
SAE AMS P 5510 : 2013 O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F)
AN842 Revision 13:2013 ELBOW - PIPE TO HOSE, 90 DEGREES
MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
MIL-DTL-12520 Revision D:2005 Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for
MIL-DTL-2 Revision G:2006 VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
AN914 Revision 11:2012 ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
PREN 6067 : 200P2 AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, BUTTON HANDLE
SAE AS 604 : 2012 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC
SAE AS 22227 : 2014(S2018) BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR
SAE J 24714 : 2001 Fluid Systems—Connector Tubes—General Specification and Part Standard
DSCC 85116 : D CONTACT ASSEMBLY, ELECTRICAL
N291-15 Requirements for safety-related structures for nuclear power plants
SAE AS 614 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC
SAE AS 5420 : 2017 HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
NASA SSTD 8070 0122 : 2014 PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL
MIL-C-83522-4 Revision F:2006 CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, RECEPTACLE, LOW PROFILE PARALLEL PC MOUNT
MIL-DTL-38394 Revision E:2009 Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI
MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
MIL-DTL-26500 Revision G:2011 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
MIL-DTL-83517 Revision B:2015 Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for
MIL-DTL-83522 Revision E:2013 Connectors, Fiber Optic, Single Ferrule, General Specification for
AN848 Revision 13:2015 Elbow, Hose, 90 Degree
AN 840 : 0011 ADAPTER, STRAIGHT, PIPE TO HOSE
AN 839 : 0009 ELBOW, TUBE TO HOSE, 45 DEGREES
MIL-C-83522-3 Revision G:2006 CONNECTOR, ADAPTER, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER
MIL-C-83522-5 Revision E:2006 CONNECTOR, RECEPTACLE, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER
MS27394 Revision C:2014 ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
SAE AS 1424 : 2014 HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE
SAE AS 1339 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC
SAE AS 81969 : 2016 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR
ASTM F 2332 : 2006 : R2013 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ISO 7169:2014 Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric
MIL-DTL-24630 Revision A:2014 Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
MIL-DTL-23928 Revision G:2014 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
SAE AIR 5693 : 2014 COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS
MIL-DTL-24215 Revision E:2015 Attenuators, Variable (Coaxial), General Specification for
MIL-DTL-24578 Revision C:2015 Valves, Globe, Pressure Instrument, Stem Test Connection, Union End
MIL-PRF-26626 Revision F:2008 HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN
MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
MIL-DTL-43695 Revision C:2000 FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
MS27084 Revision D:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
MIL-C-83522-8 Revision C:2006 CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, BULKHEAD, HEX NUT MOUNT
MIL-C-83522-2 Revision G:2006 CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STRAIGHT NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER
SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
SAE AS 95234 : 2014 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR

ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
MIL-H-6875 Revision H:1989 HEAT TREATMENT OF STEEL RAW MATERIALS
FED-STD-123 Revision H:2007 MARKING FOR SHIPMENT (CIVIL AGENCIES)
MIL-STD-163 Revision C:1978 STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE
FED-STD-183 Revision C:1980 CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS

View more information
£122.96
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.