• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AS 5420 : 2017

Current

Current

The latest, up-to-date edition.

HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

13-11-2017

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

This SAE Aerospace Standard (AS) covers the requirements for a flexible, lightweight, low pressure, self-extinguishing, integrally heated silicone hose assembly.

Committee
G-3
DevelopmentNote
Supplement 1 is available separately, see SAE AS 5420 SUP1. (09/2012)
DocumentType
Revision
Pages
35
PublisherName
SAE International
Status
Current
Supersedes

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
AWS A5.14/A5.14M : 2011 SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
ASTM A 632 : 2004 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
SAE AMS 5638 : 2015 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED
SAE AS 1650 : 2016 COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, PROCUREMENT SPECIFICATION
NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE AS 4370 : 2016 NUT, FITTING, RETAINED
SAE AMS 5571J:2012(R2018) STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AS 1708 : 2017 FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS 5421 : 2013 HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS, 125 PSI, POTABLE WATER
SAE AS 4395 : 2013 FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AMS 4777 : 2010 NICKEL ALLOY, BRAZING FILLER METAL, 82NI - 4.5SI - 7.0CR - 3.1B - 3.0FE, 1780 TO 1830 DEGREES F (971 TO 999 DEGREES C) SOLIDUS-LIQUIDUS RANGE
SAE AMS 5697 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS 5690 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AS 1073B : 2013(S2019) SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE
SAE AS 5423 : 2013 HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AMS 5567 : 2015 STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
SAE AMS 4771 : 2015 SILVER ALLOY, BRAZING FILLER METAL, 50AG - 16CD - 15.5ZN - 15.5CU - 3.0NI, 1170 TO 1270 DEGREES F (632 TO 688 DEGREES C) SOLIDUS-LIQUIDUS RANGE
SAE AS 5272 : 2016 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
AWS A5.8/A5.8M : 2013 SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING
SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
SAE AS 4468 : 2013 HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
SAE AMS 5688 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER
AWS D17.1 : 2001 SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE AS 1791 : 2015 WIRE, RETAINER - TUBE COUPLING NUT
SAE AMS 5575 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AS 6449 : 2015 SOLID FILM LUBRICANT
SAE AMS 5570 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
AWS C3.6 : 1999 SPECIFICATION FOR FURNACE BRAZING
SAE AMS 5685 : 2001 STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED, COLD FINISHED
SAE AMS 2472 : 2014 ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING
SAE AMS 4772 : 2015 SILVER ALLOY, BRAZING FILLER METAL, 54AG - 40CU - 5.0ZN - 1.0NI, 1325 TO 1575 DEGREES F (718 TO 857 DEGREES C) SOLIDUS-LIQUIDUS RANGE
SAE AMS QQ A 225 : 2012 ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR
SAE AS 21921 : 2010 NUT, SLEEVE COUPLING, FLARELESS
AWS A5.9 : 93(R1999) BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR
SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AMS5640V:2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING
SAE AMS 4778 : 2013 NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 1800 TO 1900 DEGREES F SOLIDUS-LIQUIDUS RANGE
SAE AMS STD 2219 : 1999 FUSION WELDING FOR AEROSPACE APPLICATIONS
SAE AS 4375 : 2013 FITTING END, FLARELESS, DESIGN STANDARD
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
SAE AMS 5636 : 2006 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH
SAE AS 478 : 2015 IDENTIFICATION MARKING METHODS
SAE AS 5422 B : 2013 HOSE ASSEMBLY, LINED SILICONE, HEATED, FIXED CAVITY, 125 PSI, POTABLE WATER
SAE ARP 9013 : 2005 STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
SAE AMS 4124 : 2012 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
SAE AMS 5556 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
SAE AS 1656 : 2013 FITTING END, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, MALE AND FEMALE, DESIGN STANDARD
NAS847:2012 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL
SAE AMS 5557 : 2012 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED

£125.31
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.