• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 5639 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
Available format(s)

Hardcopy , PDF

Superseded date

04-11-2022

Language(s)

English

Published date

19-01-2017

1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

Specifies a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.

Committee
AMS-F
DocumentType
Revision
Pages
7
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
QQ-S-763 Revision F:1996 Similar to

ISO 9760:2000 Aerospace — Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings — Dimensions and loads
MIL-DTL-32371-10 Base Document:2012 Fittings, Hydraulic Tube, Sleeve, Double Angle
SAE MA 4098 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC
SAE AS 4841 : 2017 FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION
AN915 Revision 14:2015 ELBOW, PIPE, 45 DEGREES
BS ISO 9748:2000 Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
MIL-DTL-8783 Revision D:2009 Clamp, Hose, Flat Band 500 Degrees F, General Specification for
17/30369678 DC : 0 PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS
MS27086 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
MS27087 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
SAE AS 5960 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
SAE AS 4388 : 2013 HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC
AN849 Revision 13:2015 NIPPLE, HOSE
AN838 Revision 9:2011 Elbow, Tube to Hose, 90 Degrees
BS ISO 8913:2006 Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
MS27077 Revision D:2014 FLANGE, SWIVEL, RETAINING
AN815 Revision 10:2015 UNION - FLARED TUBE
MS27637 Revision C:2009 ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT
BS ISO 9749:2000 Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
MS27076 Revision E:2013 Nipple, Straight, Swivel Flange
AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
SAE AS 1472 : 2013 HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER
MS27630 Revision B:2009 ADAPTER ASSEMBLY, FLARELESS, 45 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT
MS9193 Revision A:2010 NIPPLE, TUBE - SAE-AMS5639, BOSS
ISO 9748:2000 Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
SAE AS 4842 : 2016 FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION
SAE AS 18280 : 2017 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
SAE AIR 5693 : 2014 COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS
MIL-DTL-25579 Revision H:2014 Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
MIL-DTL-28748-17 Revision B:2016 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR
MS27082 Revision E:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
AN841 Revision 7:2013 ADAPTER - HOSE TO FLARED TUBE
SAE AS 4444 : 2013 FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI
ISO 9759:2000 Aerospace — Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
BS ISO 9759:2000 Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
MS27628 Revision B:2009 ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT
MS27627 Revision B:2009 ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT
AN842 Revision 13:2013 ELBOW - PIPE TO HOSE, 90 DEGREES
AN844 Revision 13:2013 ELBOW - PIPE TO HOSE, 45 DEGREES
MS18194 Revision E:2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, LONG, TURNABLE
SAE AS 5951 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
AN807 Revision 7:2007 Adapter, Straight, Tube to Hose
MIL-DTL-6001 Revision B:2013 FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE
BS ISO 9747:2000 Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
SAE AS 620 : 2012 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT
ISO 8913:2006 Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification
SAE MA 2126 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC
SAE AS 4897 : 1994 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR
SAE AS 5420 : 2017 HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
SAE AS 4468 G : 2017 HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MS27075 Revision D:2013 NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MS27071 Revision D:2013 UNION, NIPPLE
SAE AS 269J:2012:(S2018) IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS
BS ISO 9737:2000 Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
MS18195 Revision C:2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE
MS18196 Revision G:2016 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
MS27636 Revision B:2009 ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT
MIL-N-85615-3 Base Document:1989 NUT ASSEMBLY, SELF-SEALING, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F, VARIABLE NUT HEIGHT 1/64 INCHES OVERSIZE (FOR REPAIR)
MS18197 Revision G:2016 GUIDE PIN, ELECTRICAL CONNECTOR MALE AND FEMALE
AN914 Revision 11:2012 ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
SAE MA 1339 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC
SAE AS 4623 : 2016 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
SAE AS 4098 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC
SAE AS 1975 : 2016 Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems
NASA SSTD 8070 0122 : 2014 PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL
MIL-N-85615-4 Base Document:1989 NUT ASSEMBLY, SELF-SEALING, LOW PROFILE, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F
MS18173 Revision B:2012 Washer, Flat
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
BS ISO 9760:2000 Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
MIL-DTL-32434 Base Document:2013 Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for
MS27391 Revision F:2013 Nipple, Flareless, Tube to Hose - Swivel Nut
MS27631 Revision B:2009 ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT
MIL-DTL-5070 Revision F:2006 ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
AN848 Revision 13:2015 Elbow, Hose, 90 Degree
AN 840 : 0011 ADAPTER, STRAIGHT, PIPE TO HOSE
AN 839 : 0009 ELBOW, TUBE TO HOSE, 45 DEGREES
SAE AS 4604 : 2003 HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
MS27394 Revision C:2014 ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
SAE MA 620 : 2015 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC
SAE MA 2007A : 2015 HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC
SAE MA 2100 : 2015 HOSE ASSEMBLIES, METAL MEDIUM PRESSURE, HIGH TEMPERATURE, METRIC
SAE MA 1975 : 2015 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS
SAE AS 4843 : 2016 FITTINGS, BEADED, FLUID CONNECTION
SAE AS 604 : 2012 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC
SAE AS 1339 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC
SAE AS 1227 : 2013 HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT
ISO 9747:2000 Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
05/30128217 DC : DRAFT JAN 2005 ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION
BS ISO 23933:2006 Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification
MS27069 Revision H:2017 SOCKET, HOSE COUPLING
MS27629 Revision B:2009 ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT
MS27395 Revision D:2014 ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT
MS27084 Revision D:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
SAE AS 4875 : 2016 FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
ISO 23933:2006 Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification
SAE MA 2079 : 2015 HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC
NASM 21083 : 2004 NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F
SAE MA 614 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC
SAE AS 614 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC
ISO 9737:2000 Aerospace — Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
SAE MA 4623 : 2015 Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric
SAE AS 1946 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC

SAE AMS 2241 : 2016 TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE
SAE AMS 2248 : 2016 CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS
ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
SAE AMS 2806D : 2013 IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS
SAE AMS 2371 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK
SAE ARP 1917 : 2002 CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS
ASTM E 353 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
SAE AMS 2374 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS
SAE AMS 2808 : 2017 IDENTIFICATION FORGINGS
SAE AMS 7490 : 2014 RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS
SAE AMS 2243 : 2013 TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL TUBING

View more information
£74.13
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.