• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE MA 2126 : 2015

Current
Current

The latest, up-to-date edition.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

21-08-2015

1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ORDERING DATA
7 NOTES

Covers the requirements for polytetrafluoroethylene (PTFE) hose assemblies for use in aerospace hydraulic, fuel, and lubricating oil systems at temperatures between -55 degree C and 232 degree C for Class 1 assemblies, -55 degree C and 135 degree C for Class 2 assemblies, and at nominal pressures up to 10500 kPa (105 bar).

Committee
G-3
DocumentType
Standard
Pages
22
PublisherName
SAE International
Status
Current
Supersedes

SAE AMS 5689 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
SAE MA 2005 : 2015 TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC
SAE MA 2002 : 2013 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTING ASSEMBLIES
MIL-T-8808 Revision B:1981 TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY
SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 5697 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS 5690 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AS 1055 : 2013 FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
SAE AMS 4112 : 1996 BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED - 4.4Cu 1.5Mg 0.60Mn
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
SAE ARP 1153 : 2014 METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE MA 2095 : 2015 FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC
MIL-STD-831 Base Document:1963 TEST REPORTS, PREPARATION OF
SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
SAE AMS 4079 : 2017 ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED
SAE MA 1370 : 2012 SCREW THREADS - MJ PROFILE, METRIC
SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
SAE AS 1072F : 2013(S2019) SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION
SAE AMS 4117 : 2015 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651)
SAE AMS 4127 : 2012 ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED
QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
DOD-D-1000 Revision B:1977 DRAWINGS, ENGINEERING AND ASSOCIATED LISTS
SAE AMS 4069 : 2015 ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, CLOSE TOLERANCE, 2.5MG - 0.25CR (5052-0) ANNEALED
SAE MA 2078 : 1992 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE), METRIC
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AMS 5746 : 2012 ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 4082 : 2014 ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED
MIL-C-5501 Revision G:1989 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL
SAE AMS5644E:1964(S2017) STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
SAE AMS 4121 : 2017 ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED

View more information
£119.21
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.