• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

FED-STD-123 Revision H:2007

Current

Current

The latest, up-to-date edition.

MARKING FOR SHIPMENT (CIVIL AGENCIES)

Available format(s)

PDF

Language(s)

English

1. SCOPE
2. REFERENCE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. CONCLUDING MATERIAL

Specifies requirements for marking unit, intermediate and transport packages, and unit loads.

Committee
FSC PACK
DocumentType
Standard
Pages
7
PublisherName
US Military Specs/Standards/Handbooks
Status
Current

ASTM F 1145 : 2005 : R2011 Standard Specification for Turnbuckles, Swaged, Welded, Forged
ASTM E 785 : 1981 : R2006 Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM A 392 : 2011 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
SAE AMS L P 390 : 2000 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY)
LLL-A-650 Revision D:1989 ARCH AND CLIP BOARD FILES, COMPOSITION HARDBOARD BACK
W-R-36 Revision D:1983 RACEWAY AND FITTINGS, METALLIC, UNDERFLOOR
ASTM C 725 : 1990 : R2014 Standard Specification for Semidense Mineral Fiber Siding (Withdrawn 2019)
ASTM B 91 : 2017 : REDLINE Standard Specification for Magnesium-Alloy Forgings
ASTM B 403 : 2012 : REDLINE Standard Specification for Magnesium-Alloy Investment Castings
O-F-499 Revision D:1985 FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT)
O-S-602 Revision E:1977 SODIUM HYPOCHLORITE SOLUTION
ASTM C 663 : 1998 : R2008 Standard Specification for Asbestos-Cement Storm Drain Pipe
DDD-P-46 Revision D:1975 PACK, GAUZE, ABDOMINAL
AA C 30 : D CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS)
ZZ E 00661 : F (1) NOTICE 2 ERASERS, RUBBER AND RUBBER SUBSTITUTE
WW-C-624 Revision E:1983 COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION)
RR-W-410 Revision H:2015 WIRE ROPE AND STRAND
GGG-C-1520 Base Document:1965 CARRIER, TOOL
ASTM A 159 : 1983 : R2006 Standard Specification for Automotive Gray Iron Castings
ASTM C 221 : 1998 : R2003 : EDT 1 Standard Specification for Corrugated Asbestos-Cement Sheets
ASTM C 221 : 1998 Standard Specification for Corrugated Asbestos-Cement Sheets
RR-B-00300 Base Document:1966 BINDER, NOTE PAD, SPRING-BACK
O-L-298 Revision B:1969 LITHOGRAPHIC BLANKET ROLLER WASH
PPP E 1533 : B NOTICE 1 ENVELOPES, PACKAGING, CUSHIONED
P-C-111 Revision D:1977 CARBON REMOVING COMPOUND
PPP-C-795 Revision D:1994 Cushioning Material, Closed Cell Flexible, Plastic Film
ASTM B 236 : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
AA-C-2786 Base Document:2004 CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5
PPP-B-601 Revision H:1989 BOXES, WOOD, CLEATED PLYWOOD
RR-F-191 Revision K:1990 FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK FENCE FABRIC, AND ACCESSORIES) (GENERAL SPECIFICATION)
JJ-N-171 Revision C:1977 NET, INSECT
ASTM B 234M : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
DDD-C-001799 Base Document:1972 CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION
ASTM A 795/A795M : 2013 : REDLINE Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
GG-L-261 Revision D:1984 LEVEL, SURVEYING: LOCATORS, HAND-TYPE
GGG-M-125-7 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PESTICIDES AND ORGANIC VAPORS)
GG-G-91 Revision D:1972 GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE
O-D-825 Revision C:1973 DUPLICATING FLUID, DIRECT PROCESS (SPIRIT TYPE)
ASTM A 823 : 1999 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A-A-59885 Base Document:2012 CORROSION PREVENTION COMPOUND
ASTM B 247M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
BB-H-1168 Revision D:2010 HELIUM, TECHNICAL
DDD-B-1022 Revision A:1975 BLANKET, BED (THERMAL TYPE), COTTON
A-A-2765 Base Document:1991 PENCIL, MECHANICAL FOR 1.1 MM LEAD SIZE
MMM-A-132 Revision B:1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
O-N-350 Revision C:1991 NITRIC ACID, TECHNICAL
L-P-535 Revision E:1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
MMM-A-1617 Revision B:1995 ADHESIVE RUBBER BASE GENERAL PURPOSE
ASTM D 2683 : 2014 : REDLINE Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
TT-P-595 Revision A:1972 PRESERVATIVE COATING, CANVAS
GGG-V-790 Revision E:1992 VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE
ASTM A 853 : 2004 Standard Specification for Steel Wire, Carbon, for General Use
A-A-2753 Base Document:1991 INK, BLACK, FOR DUPLICATING PROCESS
ASTM B 211 : 2012 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
MIL-DTL-12000 Revision K:2012 CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF
TT-M-261 Revision D:1970 METHYL ETHYL KETONE, TECHNICAL
GGG-S-282 Revision E:1983 SHEARS, METAL CUTTING, ELECTRIC (PORTABLE)
AA-C-571 Revision H:1993 COT, FOLDING
O-R-1151 Revision B:1969 REGENERATOR, LITHOGRAPHIC BLANKET
BB-N-411 Revision C:1973 NITROGEN, TECHNICAL
J-W-1177 Revision B:1988 WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION
FF-B-575 Revision C:1970 BOLTS, HEXAGON AND SQUARE
GGG-P-323 Revision C:1962 PICK, ICE
O-C-1824 Base Document:1973 CLEANING COMPOUND, SOLVENT, HEAVY DUTY, LIQUID
O-B-420 Revision C:1976 BLEACH, LAUNDRY, ORGANIC CHLORINE
ASTM C 1448/C1448M : 2005 Standard Specification for Non-Asbestos Fiber-Cement Conduit
PPP-P-225 Revision C:1974 PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, GENERAL OFFICE, STEEL
MIL-S-51421 Base Document:1976 SCREENING, CHEMICAL BIOLOGICAL FILTER
PPP-P-001938 Base Document:1976 PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED
PPP-G-2919 Base Document:1997 GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF
CCC-P-86 Revision E:1971 PADDING, COTTON, STITCHED ROVING
O-A-548 Revision D:1974 ANTIFREEZE COOLANT, ENGINE, ETHYLENE GLYCOL, INHIBITED, CONCENTRATED
L-F-475 Revision A:1965 FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING
GGG-B-0060 Revision A Interim Revision:1966 BAG, TOOL SATCHEL
GGG-L-001345 Base Document:1967 LEAD JOINT RUNNER
GGG-F-570 Revision A:1966 FORCEPS, SHEET HOLDER
GG-F-00336 Revision G:1976 FILE AND REAMER, PULP CANAL, DENTAL, STANDARDIZED
O-C-291 Revision B:1983 CHLOROFORM, TECHNICAL
ASTM A 623M : 2016 : REDLINE Standard Specification for Tin Mill Products, General Requirements [Metric]
UU-P-553 Revision C:1976 PAPER, WRAPPING, TISSUE
ASTM E 785 : 1981 : R2001 Standard Specification for Crucibles, Ignition, Laboratory, Metal
GGG-J-1564 Revision C:1992 JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE
KK-L-271 Revision H:1976 LEATHER, CATTLEHIDE, STRAP, VEGETABLE-TANNED
PPP-F-690 Revision D:1981 FROZEN FRUIT, FROZEN FRUIT JUICES, AND FROZEN VEGETABLES, PACKAGING OF
DDD-C-001023 Base Document:1966 CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER)
PPP-P-1656 Base Document:1974 PACKING AND PACKAGING, FLUORESCENT LIGHT FIXTURES
QQ-S-781 Revision H:1974 STRAPPING, STEEL, AND SEALS
ASTM A 232/A232M : 2005 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
K-P-146 Revision E:1979 TARPAULINS, COTTON DUCK, FWWMR
P-C-438 Revision A Base Document:1963 CLEANING COMPOUND, OPTICAL LENS
U-B-50 Revision A:1976 BACITRACIN AND NEOMYCIN SULFATE OINTMENT
MMM A 178 : A ADHESIVE, PAPER LABEL, WATER RESISTANT
ASTM C 428/C428M : 2005 : R2011 : EDT 1 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
TT-L-50 Revision G:1976 LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS)
MIL-O-51401 Base Document:1974 OVERBOOT, PLASTIC FILM
MIL P 26514 : F POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING
GG-C-131 Revision C:1977 CASSETTES, RADIOGRAPHIC FILM (MEDICAL)
TT-W-156 Revision B:1972 WATER-REPELLENT COMPOUND, TEXTILE FINISH
QQ-A-200 Revision E:1980 ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE AND WIRE, EXTRUDED, GENERAL SPECIFICATION FOR
GG-R-550 Revision B:1981 ROD, STADIA, FOLDING, WITH CASE
ASTM D 2282 : 1999 : EDT 1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
GG-C-2736 Revision A:1987 CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION)
O-C-265 Revision C:1991 CHEMICAL, ANALYTICAL, GENERAL SPECIFICATION FOR
DDD-W-80 Revision E:1987 WASHCLOTH, TERRY, COTTON
PPP-P-1132 Revision C:1983 PACKAGING OF WOOLLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS
AA-W-001950 Base Document:1975 WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME
SS-S-200 Revision E:1984 SEALANT, JOINT, TWO COMPONENTS, JET BLAST RESISTANT, COLD APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT
QQ-A-225 Revision G:1990 ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED, GENERAL SPECIFICATION FOR
SS-S-1614 Revision A:1984 SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS
ASTM F 1673 : 2010 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM A 48/A48M : 2003 : R2008 Standard Specification for Gray Iron Castings
ASTM C 220 : 1991 : R2015 Standard Specification for Flat Asbestos-Cement Sheets (Withdrawn 2021)
BB-A-1034 Revision B:1985 COMPRESSED AIR, BREATHING
ASTM B 102 : 2000 : R2005 Standard Specification for Lead- and Tin-Alloy Die Castings (Withdrawn 2011)
MIL-P-14790 Base Document:1968 PLASTIC SHEET AND STRIP (POLYOLEFIN) (FOR USE IN AMMUNITION)
GGG-C-291 Revision A:1963 CHALK LINE AND REEL (SELF-CHALKING)
JJJ-L-821 Revision A:1969 LITHOGRAPHIC PLATE PRESERVING GUM
TT-A-511 Revision E:1992 AMYL ACETATE, TECHNICAL
ASTM F 794:2003 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
QQ-A-1876 Base Document:1974 ALUMINUM FOIL
FF-B-584 Revision F:1989 BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD
ZZ-R-765 Revision E:1991 RUBBER, SILICONE; RUBBER SHEET SOLID
MIL C 12000 : H CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF
HH-I-1972 Base Document:1981 INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE
GGG-H-496 Revision C:1961 HOE; GARDEN, MORTAR, AND MORTAR MIXING
MMM-A-179 Revision B:1982 ADHESIVE PAPER LABEL
P-D-410 Revision C:1977 DISHWASHING COMPOUND, HAND, (SYNTHETIC DETERGENT, SOLID AND LIQUID FORM)
ASTM F 1348/F1348M : 1991 : R2007 Standard Specification for Pneumatic Rotary Descaling Machines
GGG-E-936 Revision C:1967 EXTRACTOR, SCREW (STUD AND PIPE), AND EXTRACTOR, TAP
SS-C-661 Revision A:1974 CRAYON, MARKING
PPP-B-1358 Revision A:1973 BAG, COTTON DUCK
DDD-B-151 Revision J:1988 BEDSPREAD, COTTON, COTTON/RAYON, COTTON/POLYESTER OR POLYESTER/RAYON BLEND
MIL C 39028 : C CAPACITORS, PACKAGING OF
PPP-P-50 Revision A:1970 PACKAGING AND PACKING OF THREAD FOR DOMESTIC AND OVERSEAS SHIPMENT
KK-L-165 Revision C:1964 LEATHER, CATTLEHIDE, VEGETABLE TANNED AND CHROME RETANNED, IMPREGNATED; AND SOLES
PPP-S-760 Revision B:1973 STRAPPING, NONMETALLIC, (AND CONNECTORS)
GGG-W-686 Revision C:1969 WRENCH TORQUE
JJ-W-155 Revision H:1988 WEBBING, TEXTILE, (COTTON, ELASTIC)
GGG-E-00930 Base Document:1963 EXTRACTOR, ELECTRON TUBE (TONG TYPE)
HH-G-101 Revision E:1990 GASKET, METALLIC-ENCASED
DDD R 306 : B RIBBONS, TELETYPEWRITER, RECORD
QQ-B-637 Revision A:1967 BRASS, NAVAL, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS WITH FINISHED EDGES (BAR, FLAT WIRE, AND STRIP)
GGG-P-463 Revision C:1973 PLATE, SURFACE, (GRANITE)
P-B-172 Revision B:1973 BELTS AND BANDS, ABRASIVE (COATED CLOTH, POWER MACHINE)
MIL V 51195 : B VALVE, OUTLET, C19
EE-E-911 Revision G:1971 EXTRACTS, FLAVORING AND FLAVORS
AAA-B-105 Revision B:1970 BALANCES, PRESCRIPTION
GG-T-380 Base Document:1958
L P 00665 : A NOTICE 1 PROTECTOR, DUPLICATING STENCIL
AA-O-00235 Base Document:1962 OFFICE FURNITURE, STEEL, SECTIONAL
GGG-P-446 Revision A:1964 PLATE, LAPPING
TT-P-85 Revision E:1977 PAINT, TRAFFIC AND AIRFIELD MARKING, SOLVENT BASE
HH-I-558 Revision C:1992 INSULATION, BLANKETS, THERMAL (MINERAL FIBER, INDUSTRIAL TYPE)
SS-C-466 Revision E:1964 CLOTH, THREAD, AND TAPE-ASBESTOS
AA-V-200 Revision A:1965 VENETIAN BLINDS
GG M 181 : D MEASURER, MAP
NNN-C-688 Base Document:1962 CRUCIBLE, IGNITION LABORATORY METAL
P-S-651 Revision E:1974 SODIUM ORTHOSILICATE, TECHNICAL
GGG-P-655 Revision B:1964 PRICKER, SAILMAKER'S
AA-C-001779 Revision G:1996 FILING CABINET, STEEL, LATERAL AND FRONT TO BACK FILING, LEGAL AND LETTER SIZE MATERIAL, GENERAL OFFICE
QQ-S-626 Revision C:1976 STEEL PLATE, ALLOY (STRUCTURAL QUALITY)
OO-D-2854 Base Document:1994 DITCHING MACHINE, WHEEL TYPE TRENCHER, CRAWLER-MOUNTED, DIESEL-ENGINE-DRIVEN
MIL-V-51496 Base Document:1983 VOICEMITTER OUTLET VALVE ASSEMBLY
GG D 00458 : C DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE
NNN-D-345 Revision A:1963 DISH EVAPORATING PLATINUM
TT-T-548 Revision F:1991 TOLUENE, TECHNICAL
GGG-B-376 Revision B:1963 BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP)
O-S-801 Revision F:2001 SULFURIC ACID, ELECTROLYTE (FOR STORAGE BATTERIES)
O-S-639 Revision B:1984 SODIUM PHOSPHATE, DIBASIC, ANHYDROUS, TECHNICAL
GG S 776 : C STRAIGHTEDGE, STEEL, DRAFTSMEN
W-R-175 Revision D:1986 REELS AND HUBS FOR MAGNETIC RECORDING TAPE, GENERAL SPECIFICATION FOR
L-S-125 Revision B:1972 SCREENING, INSECT, NONMETALLIC
KKK-W-291 Revision G:2016 WHEELBARROWS
ASTM D 5118/D5118M : 2015 : REDLINE Standard Practice for Fabrication of Fiberboard Shipping Boxes
MIL-STD-1428 Base Document:1981 CLEANING COMPOUNDS
WW-H-001220 Base Document:1966 HEAD SPRINKLER, (UNDERGROUND CONNECTED)
L-F-001641 Base Document:1971 FLOOR COVERING TRANSLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING
ASTM C 1449/C1449M : 2005 : REV A Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
AA-F-001165 Revision B Interim Revision:1989 FURNITURE, METAL FRAME, LAMINATED PLASTIC SURFACED PANELS, CASE GOODS AND TABLES
PPP E 540 : C NOTICE 1 ENVELOPE, WATER RESISTANT, FOR PACKING, LISTS AND SHIPPING DOCUMENTS
FF F 111 : E FASTENERS, PAPER, METALLIC, COMPRESSOR TYPE
QQ-W-345 Revision B:1965 WIRE, ELECTRICAL, STEEL, COPPER COVERED
GGG-G-15 Revision C:1975 GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC)
GG-B-636 Revision B:1960 BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE
GGG-C-00413 Base Document:1964 CLAMPING TOOL, STRAP BAND, HOSE
MIL-A-46099 Revision C:1987 ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE)
GG D 475 : A DIVIDER, SPACING, EQUAL
MIL C 51280 : B NOTICE 1 COVER, VOICEMITTER-OUTLET VALVE, C13R1
TT-F-325 Revision A:1965 FILLER, ENGRAVING, STAMPED MARKING
GGG-N-185 Revision A:1964 NEEDLE, CABLE LACING
L-P-516 Revision A:1967 PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST
GG-H-00582 Revision A:1967 HOLDER, PATIENT'S BED TRAY CARD
GGG-C-415 Revision A:1965 CLAW, TACK
KK-B-151 Revision H:1977 BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE
GG-M-001371 Base Document:1978 MALLET, PLUGGING, DENTAL
GGG-T-2761 Base Document:1991 TONGS, MATERIAL LIFTING, PIPE
MIL-DTL-19491 Revision J:2014 SEMICONDUCTOR DEVICES, PACKAGING OF
J-L-231 Revision C:1987 LEADS, STORAGE-BATTERY
JJ-B-191 Revision A:1967 BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN)
NNN-T-785 Revision B:1969 TUBE CENTRIFUGE PLASTIC
PPP-B-576 Revision C:1993 BOX, WOOD-CLEATED PANELBOARD
PPP-B-591 Revision B:1971 BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED
GG-X-635 Revision D:1963 X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL
L-P-1041 Revision A:1973 PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER
MIL-F-51369 Revision B:1979 FILTERS, GAS: RECIRCULATION (550 CFM AND 1200 CFM)
MIL-V-0010134 Revision E:1974 VALVE, OUTLET, CHEMICAL BIOLOGICAL MASK C 15
LLL-B-810 Revision B:1973 BUILDING BOARD, (HARD BOARD) HARD PRESSED VEGETABLE FIBER
L-H-490 Revision B:1992 HOLDER, CARD-LABEL, (PLASTIC)
GGG-E-950 Revision A:1988 EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND
GGG-A-926 Revision C:1961 AX, (SINGLE BIT, DOUBLE BIT, PICK HEAD AND MATTOCK HEAD)
GGG-S-0075 Revision A:1966 SAW SET, HAND
O-C-110 Revision C:1984 CALCIUM HYDROXIDE, TECHNICAL
AA-T-00670 Base Document:1964 TRAY, STATIONARY, METAL, FOR STEEL DESK
GGG M 00100 : 0 MARLINESPIKE (MANILA ROPE)
TT-P-641 Revision G:1976 PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES)
L-C-001369 Base Document:1969 CUSHION, CARPET AND RUG, BONDED URETHANE
GG-P-001264 Base Document:1967 PENPOINTS AND PENHOLDER, CROWQUILL
ZZ-G-710 Revision B:1993 GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS
AASHTO M 54M/M 54 : 2007 : R2012 SPECIFICATION FOR WELDED DEFORMED STEEL BAR MATS FOR CONCRETE REINFORCEMENT
AASHTO M 329M/M 329 : 2011 SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM D 2464 : 2015 : REDLINE Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM C 508/C508M : 2000 : R2009 : EDT 1 Standard Specification for Asbestos-Cement Underdrain Pipe
AASHTO M 329M/M 329 : 2011 : R2015 SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT
AASHTO M 221M/M 221 : 2009 : R2013 SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT, DEFORMED, FOR CONCRETE
SAE AMSWWT700B:2001(S2018) TUBE, ALUMINIUM AND ALUMINIUM ALLOY, DRAWN, SEAMLESS, GENERAL SPECIFICATION FOR
ASTM A 864/A864M : 1990 Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997)
ASTM B 127 : 2005 : R2014 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B 127 : 2005 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
SAE AMSQQA367E:2012(S2018) ALUMINUM ALLOY FORGINGS
ASTM A 48/A48M : 2003 : R2016 Standard Specification for Gray Iron Castings
ASTM A 500 : 2003 : REV A Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM C 1447 : 2004 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM F 878 : 1995 Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)
ASTM E 786 : 1981 : R2001 Standard Specification for Dishes, Evaporating, Platinum
ASTM F 2881 : 2011 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 1527 : 1999 : R2005 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014)
ASTM C 1450/C1450M : 2004 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
ASTM D 3261 : 2016-11 SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING
ASTM A 135/A135M : 2009 : R2014 Standard Specification for Electric-Resistance-Welded Steel Pipe
ASTM A 686 : 1992 : R2010 Standard Specification for Tool Steel, Carbon
ASTM C 223 : 1998 : R2014 Standard Specification for Asbestos-Cement Siding (Withdrawn 2019)
ASTM D 3034 : 2016 : REDLINE Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM A 47/A47M : 1999 : R2004 Standard Specification for Ferritic Malleable Iron Castings
ASTM A 230/A230M : 2005 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A 48/A48M : 2003 : R2012 Standard Specification for Gray Iron Castings
ASTM F 1281 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM B 317/B317M : 2007 : R2015 : EDT 1 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM A 905 : 2004 : R2010 Standard Specification for Steel Wire, Pressure Vessel Winding
ASTM F 409 : 2017 : REDLINE Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ASTM A 809 : 2008 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM A 47M : 1990 Standard Specification for Ferritic Malleable Iron Castings [Metric]
ASTM A 121 : 2013 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM B 491/B491M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM E 323 : 2011 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM A 159 : 1983 : R2011 Standard Specification for Automotive Gray Iron Castings
ASTM F 2806 : 2010 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM F 892 : 1995 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)
ASTM C 725 : 1990 : R2003 Standard Specification for Semidense Mineral Fiber Siding
ASTM A 511/A511M : 2016 : REDLINE Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
ASTM F 1183 : 1996 : R2002 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM A 752M : 2004 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
ASTM A 47/A47M : 1999 : R2009 Standard Specification for Ferritic Malleable Iron Castings
ASTM A 1085/A1085M : 2015 : REDLINE Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
ASTM A 1069/A1069M : 2016 : REDLINE Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
ASTM A 600 : 1992 : REV A : R2010 Standard Specification for Tool Steel High Speed
ASTM F 2762 : 2011 : EDT 1 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016)
ASTM F 2763 : 2016 : REDLINE Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM E 785 : 1981 : R2011 Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM C 222 : 1997 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Roofing Shingles
ASTM C 659 : 1990 : R2008 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
ASTM C 296/C296M : 2000 : R2009 : EDT 1 Standard Specification for Asbestos-Cement Pressure Pipe
ASTM A 996/A996M : 2016 : REDLINE Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
SAE AMS QQ A 200 : 2004 ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR
ASTM D 2680 : 2001 : R2014 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM F 2969 : 2012 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
ASTM A 834 : 1995 : R2001 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM F 794 : 2003 : R2014 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM C 725 : 1990 : R1998 Standard Specification for Semidense Mineral Fiber Siding
ASTM C 875 : 1998 : R2008 Standard Specification for Asbestos-Cement Conduit
ASTM B 163 : 2011 : R2017 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM F 2829 : 2010 Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
ASTM A 854/A854M : 2008 : R2017 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM F 1360 : 2017 : REDLINE Standard Specification for Ovens, Microwave, Electric
ASTM F 1145 : 2005 : R2017 Standard Specification for Turnbuckles, Swaged, Welded, Forged
ASTM C 663 : 1998 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Storm Drain Pipe
ASTM E 786 : 1981 : R2006 Standard Specification for Dishes, Evaporating, Platinum
ASTM F 2307 : 2003 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)
ASTM B 317/B317M : 2007 : R2015 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM F 2658 : 2007 : R2019 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM A 834 : 1995 : R2015 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM F 2986 : 2012 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
ASTM B 316/B316M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM C 663 : 1998 Standard Specification for Asbestos-Cement Storm Drain Pipe
ASTM C 668 : 1998 : R2014 Standard Specification for Asbestos-Cement Transmission Pipe (Withdrawn 2019)
AA-D-2757 Base Document:1990 DOOR, VAULT, SECURITY
J-C-580 Revision B:1974 CORD, ELECTRICAL AND WIRE, ELECTRICAL (0- TO 600- VOLT SERVICE)
HH-I-595 Revision C:1976 INSULATION TAPE, ELECTRICAL, PRESSURE-SENSITIVE ADHESIVE, PLASTIC
AA-C-2859 Base Document:1994 CABINET, SECURITY, WEAPONS STORAGE
W-E-00661 Revision B:1999 ERASER, ELECTRIC
MIL-S-21472 Revision C:1988 SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR
GG S 001090 : A SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES)
J-L-2744 Base Document:1990 LEADS, ELECTRICAL, ARC-WELDING
GG-S-00795 Revision B:1990 SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, DOUBLE COMPRESSOR, MOBILE, 115 VOLT; 60 CYCLE, AC (WITH ETHER VAPORIZER)
J-C-1270 Revision B:1973 CABLE ASSEMBLY, POWER, ELECTRICAL
GG-I-446 Revision E:1978 ILLUMINATOR, X-RAY FILM
KKK-T-2807 Base Document:1992 TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4
QQ-S-571 Revision F:1994 SOLDER, ELECTRONIC (96 TO 485 DEGREES C)
F-F-2790 Base Document:1991 FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION
GG-S-1554 Base Document:1973 STAMP, TIME (ELECTRIC CORRESPONDENCE)
W-J-800 Revision F:1992 JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED)
AA-F-363 Revision C:1990 FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE
FF-L-2937 Base Document:2005 COMBINATION LOCK, MECHANICAL
OO W 00860 : E WASHING MACHINE AND DRYING TUMBLERS, HOUSEHOLD LAUNDRY, POWER OPERATED AND LAUNDRY COMMERCIAL (SELF-SERVICE)
W-F-406 Revision E:1993 FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE
AA-F-357 Revision F:1970 FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY
W-S-610 Revision E:1990 SPLICE CONNECTORS
W-F-408 Revision E:1989 FITTING FOR CONDUIT, METAL, RIGID, (THICK-WALL AND THIN-WALL (EMT) TYPE)
BB-E-2879 Revision A:2001 EXTINGUISHER, FIRE, CARBON DIOXIDE (CO[2]), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE
NNN-O-001191 Base Document:1966 OVEN LABORATORY
AA-V-2737 Base Document:1990 MODULAR VAULT SYSTEMS
J-C-30 Revision B:1989 CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION)
JJ-N-180 Revision H:2015 NETS, LAUNDRY
W-P-115 Revision C:1990 PANEL, POWER DISTRIBUTION
AA-S-1518 Revision A:1970 SAFE, TOOL RESISTANT, UNINSULATED, SECURITY
SAE AS 6228 : 2014 SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS
AA-D-600 Revision D:2000 DOOR, VAULT, SECURITY
CC-G-2745 Base Document:1984 GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED)
PPP-B-1672 Revision E:2013 BOXES, SHIPPING, REUSABLE WITH CUSHIONING
AA-V-2940 Base Document:2008 VAULT SYSTEM, ARMORY, ASSEMBLED
GG-G-76 Revision E:1980 GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES)
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
L-P-509 Revision A:1965 PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING
ASTM E 786 : 1981 : R1996 : EDT 1 Standard Specification for Dishes, Evaporating, Platinum
W-D-661 Revision E:1995 DRILL, ELECTRIC, PORTABLE, (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL
A-A-2780 Base Document:1992 TYPE CLEANER
TT-C-621 Revision B:1973 CORRECTION FLUID, DUPLICATING MACHINE STENCIL
QQ-S-681 Revision F:1974 FEDERAL SPECIFICATION STEEL CASTINGS
C-F-160 Revision C:1970 FEATHERS, WATERFOWL; AND DOWN WATERFOWL
ASTM A 1095 : 2015 Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
MIL-D-51388 Revision A:1979 DETECTOR CELL, CHEMICAL AGENT
WW-H-1053 Revision A:1987 HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL)
GG-T-35 Revision C:1989 TABLE; DRAWING, TRACING, AND SCRIBING
ASTM A 635/A635M : 2015 : REDLINE Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
AA-B-260 Revision F:1975 BEDSPRING, BOX TYPE
MIL-C-10382 Revision D:1983 CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT
QQ C 591 : E NOTICE 1 COPPER SILICON, COPPER ZINC SILICON, AND COPPER NICKEL SILICON ALLOYS, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE
MIL-W-71125 Base Document:1992 WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE
GGG-H-211 Revision D:1985 HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING
ASTM B 317/B317M : 2007 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
G-E-550 Revision C:1985 ENVELOPE, PHOTOGRAPHIC NEGATIVE, PAPER
O-C-303 Revision D:1985 CHROMIUM TRIOXIDE, TECHNICAL
MIL-S-15204 Revision D:1984 SEALING COMPOUND, JOINT AND THREAD, HIGH TEMPERATURE
PPP-P-1136 Revision D:1986 PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS
ASTM A 135 : 2005 Standard Specification for Electric-Resistance-Welded Steel Pipe
PPP-C-1683 Revision A:1988 CUSHIONING MATERIAL, EXPANDED POLYSTYRENE LOOSE FILL BULK (FOR PACKAGING APPLICATION)
GGG-M-125-3 Revision A:1982 RESPIRATOR ASSEMBLIES: AIR LINE, WITH DISPOSABLE HOOD (SUPPLIED AIR)
GGG-M-125 Revision G:1985 RESPIRATOR AND RESPIRATOR ASSEMBLIES: AIR LINE; NON-POWERED AIR-PURIFYING AND POWERED AIR-PURIFYING
TT-L-47 Revision C:1976 LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER
ASTM B 791 : 1997 Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999)
GG-T-671 Revision F:1981 TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION)
ASTM B 127 : 2005 : R2009 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
GGG-M-125-2 Revision A:1982 RESPIRATOR ASSEMBLIES: AIR LINE, WITH HELMET (SUPPLIED AIR)
A-A-2785 Base Document:1992 PENCIL, DRAFTING
AASHTO M 203M/M 203 : 2012 SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT
AASHTO M 334M/M 334 : 2017 SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS
GGG-M-125-4 Revision C:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, CHEMICAL CARTRIDGE (FOR ORGANIC VAPORS)
GGG-D-650 Revision B:1967 DRILL, MASONRY, ROTARY DRIVEN (CORELESS)
PPP-P-291 Revision E:1976 PAPERBOARD, WRAPPING AND CUSHIONING
HH-F-341 Revision F:1973 FILLERS, EXPANSION JOINT: BITUMINOUS (ASPHALT AND TAR) AND NONBITUMINOUS (PREFORMED FOR CONCRETE)
AA-C-001402 Base Document:1986 CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK
AA-D-195 Revision B:1961 DESK, FLAT TOP, STEEL, CONFERENCE TYPE
EE-I-116 Revision E:1972 ICE CREAM, ICE MILK AND SHERBERT, REGULAR AND MELLORINE OR MELLORINE TYPES, ICES AND NOVELTIES
QQ-S-700 Revision D:1977 STEEL SHEET AND STRIP, MEDIUM AND HIGH CARBON
QQ-T-830 Revision A:1961 TUBE, STEEL, (CARBON, MECHANICAL; SEAMLESS AND WELDED)
QQ-F-461 Revision C:1968 FLOOR PLATE, STEEL, ROLLED
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
GG T 416 : A TIMER, INTERVAL, SPRING-DRIVEN, PHOTOGRAPHIC
FF-L-2740 Revision A:1997 LOCKS, COMBINATION
QQ-W-461 Revision H:1978 WIRE, STEEL, CARBON, ROUND, BARE AND COATED
O-L-164 Revision D:1970 LEATHER DRESSING, MILDEW-PREVENTIVE
ASTM B 865 : 2004 : R2010 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
RR-P-1352 Revision C:1989 PARTITION, TOILET, COMPLETE
HH-I-1972-3 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM
UU-P-268 Revision G:1973 PAPER, KRAFT, WRAPPING
GGG-W-00649 Base Document:1966 WRENCH PLIER CLAMP PLIER AND PLIER, TUBING PINCH
DDD-S-281 Revision K:1978 SHEET, BED, COTTON AND POLYESTER COTTON
HH-I-1972-1 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE, FACED WITH ALUMINUM FOIL ON BOTH SIDES OF THE FOAM
SS-S-169 Revision B:1975 SEALER, JOINT, SEWER, MINERAL-FILLED, HOT-POUR
GG-T-00311 Revision B:1967 THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER)
GG-V-350 Base Document:1990 VIEWER, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC
ASTM C 875 : 1998 : R2014 Standard Specification for Asbestos-Cement Conduit (Withdrawn 2019)
TT-P-001385 Base Document:1976 PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT)
F-B-2835 Base Document:1995 BOILER, STEAM, LOW PRESSURE, FIBRETUBE
GG-D-635 Revision D:1984 DRAWING BOARD AND DRAWING BOARD TRESTLES
KK-I-570 Revision D:1990 INSOLE, FOOTWEAR, LEATHER, CATTLEHIDE
PPP-P-1133 Revision C:1983 PACKAGING OF SYNTHETIC FIBER FABRICS
W-B-411 Revision A:1961 BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY
GGG-M-125-11 Revision A:1982 RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT (PORTABLE BACK-PACK)
MIL-L-0050064 Revision F:1977 LENSES, OPHTHALMIC, SIMPLE
SS-S-1996 Base Document:1976 SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES
GG-S-161 Revision D:1985 SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION)
L-P-398 Revision B:1973 PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE
QQ-A-371 Revision F:1971 ALUMINUM ALLOY INGOT (FOR REMELTING)
QQ-A-596 Revision E:1981 ALUMINUM ALLOY PERMANENT AND SEMI-PERMANENT MOLD CASTINGS
TT-N-97 Revision D:2007 Naphtha; Aromatic
GG I 00521 : NOTICE 1 INDICATOR, STERILIZATION
TT-E-506 Revision K:1977 ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE)
L-F-1593 Base Document:1970 FUNNELS, PLASTIC
TT-P-1565 Revision B:1978 PAINT, BOOT TOPPING BLACK
MIL F 51353 : A NOTICE 1 FUZE, HAND GRENADE, M201A1
UU-P-00175 Base Document:1965 PAPER, CORRECTION
NNN-P-1475 Revision B:1970 PAPER FILTER ANALYTICAL
GG-W-239 Revision C:1985 WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL)
SS-C-635 Revision B:1966 CRAYON ASSORTMENT, DRAWING, COLORED
JJJ-A-20 Base Document:1958 ACACIA, TECHNICAL (GUM ARABIC)
ZZ-H-461 Revision E:1986 HOSE AND HOSE ASSEMBLY, RUBBER, GAS (ACETYLENE HYDROGEN, AIR AND OXYGEN
DDD-C-001630 Base Document:1973 CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE
HHH-V-1867-7 Base Document:1974 RADISHES, FRESH, READY-TO-USE
P-D-240 Base Document:1960 DETERGENT, SURGICAL
GGG-S-60 Revision C:1978 SAWS, BUTCHER'S; AND BLADES, BUTCHER'S HANDSAW
GG-T-355 Revision B:1967 THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM, (METEOROLOGICAL)
MIL-DTL-39028 Revision F:2013 CAPACITORS, PACKAGING OF
GG-A-616 Revision E:1978 APPLICATOR, DISPOSABLE
UU F 00350 : B FILE BACKER, PAPER
AA-S-698 Revision B:0196 STOOL, STRAIGHT
L-P-508 Revision H:1977 PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE
PPP-P-1937 Base Document:1976 PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE
PPP-P-1660 Revision A:1973 PALLET, EXPENDABLE
GGG-B-211 Revision B:1967 BEVELS: SLIDING T; UNIVERSAL: AND SHIP CARPENTERS'
GGG-C-520 Revision B:1967 CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF
NNN-C-1434 Revision C:2004 COVER GLASS MICROSCOPE SLIDE
GGG-W-301 Revision B:1963 WHEEL, BUFFING AND POLISHING
NNN-C-1698 Revision A:1975 COUNTER BLOOD CELLS DIFFERENTIAL
NNN-D-335 Revision B:1975 DISH CULTURE PETRI STERILE PLASTIC DISPOSABLE
GGG-P-00475 Base Document:1964 PLIERS, JEWELLERS
PPP-B-585 Revision D:1992 BOX, WOOD, WIREBOUND
A-A-177 Revision C:1994 DICTIONARY, ENGLISH, TYPE 2 (MINIMUM 150,000 ENTRIES)
GG R 1506 : A ROD, LEVEL. PHILADELPHIA
GG-R-1971 Base Document:1976 RETRACTOR, RIB, HARKEN
AA-D-001949 Base Document:1975 DORMITORY FURNITURE: MODULAR COMPOSITE METAL AND WOOD
GGG-P-61 Revision A:1966 PARALLELS; STEEL AND CAST-IRON, PRECISION-GROUND
GGG-W-643 Revision B:1963 WRENCH, PIPE, INTERNAL-GRIPPING
O-A-429 Revision D:1984 ALUMINUM SULFATE, TECHNICAL
GGG-H-135 Base Document:1966 HAWK, PLASTERER'S
NNN-S-636 Revision C:1975 PLATE SPOT TEST WHITE PORCELAIN
GG-S-1616 Revision A:1987 SCISSORS, COLLAR AND CROWN
FED-STD-803 Base Document:1991 PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS)
PPP S 30 : D NOTICE 1 SACK, SHIPPING, PAPER (CUSHIONED)
GGG-M-125-1 Revision B:1982 RESPIRATOR ASSEMBLIES, AIR LINE, WITH FACE PIECE (SUPPLIED AIR)
QQ-C-585 Revision B:1974 COPPER NICKEL ZINC ALLOY PLATE, SHEET, STRIP AND BAR (COPPER ALLOY NUMBERS 735, 745, 762, 766 AND 770
GGG-F-00340 Base Document:1965 FILE, ROTARY
MS35643 Revision D:2011 GASKET: SYNTHETIC RUBBER, CAP, FUEL TANK
KK-L-2004 Base Document:1976 LEATHER, CATTLEHIDE, DEERSKIN AND HORSEHIDE, CHROME TANNED
KK-L-241 Revision D:1969 LEATHER, CATTLEHIDE, RIGGING
Q-C-571 Revision C:1969 COKE (COAL)
GGG A 00450 : 1964 ALIGNMENT TOOL, ELECTRIC EQUIPMENT
GG L 256 : E LETTERING SETS AND ACCESSORIES
AA-F-700 Revision B:1975 FROZEN FOOD CABINETS, MECHANICALLY REFRIGERATED, HOUSEHOLD
P-P-105 Revision C:1970 PAPER, ABRASIVE, FLINT
MMM-A-121 Base Document:1966 ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL
GGG-F-001391 Base Document:1967 FILER, PISTON RING
UU-B-368 Revision B:1992 BINDER, LOOSE-LEAF, SPRING BACK
A-A-319 Revision A:1979 PAPER WRAPPING WET WAXED
GG-S-604 Base Document:1960 SPECULUM, VAGINAL
FF-O-601 Revision F:1990 OPENERS, CAN, HAND AND MOUNTED
O-E-780 Revision B:1992 ETHYLENE GLYCOL MONOMETHYL ETHER, TECHNICAL
MIL E 8971 : B ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE
DD-S-720 Revision A:1960 STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND
ASTM C 746 : 1990 : R2003 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
GGG S 00278 : A (4) SHEARS AND SCISSORS
MIL-E-0050069 Revision E:1977 EYERING, FIELD PROTECTIVE MASK, C4
GG-H-1970 Base Document:1976 HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5-1/2 INCH
A-A-2776 Base Document:1992 PENCIL, WHITE CORRECTION LEAD
A-A-2749 Base Document:1992 INK, WRITING RED
ASTM D 4317 : 2016 : REDLINE Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
TT I 531 : C NOTICE 1 INK, DRAWING, WATERPROOF, COLORED (S/S BY A-A-2331)
O-A-51 Revision H:1992 ACETONE, TECHNICAL
MIL S 37358 : A SEALER HOLDER, CAPILLARY TUBE
ASTM F 289 : 1996 Standard Specification for Molybdenum Wire and Rod for Electronic Applications
ASTM A 1109 : 2018 Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
ASTM E 784 : 1989 : R2017 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM A 525 : 1993 Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994)
MIL-DTL-83833 Revision C:2017 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER
AASHTO M 204M/M 204 : 2014 SPECIFICATION FOR UNCOATED STRESS-RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE
ASTM B 894 : 2017 : REDLINE Standard Specification for ACuZinc5
GG-T-353 Revision D:1975 THERMOMETERS, SELF- INDICATING, BIMETALLIC
GG-S-1341 Revision A:1975 WASHER-STERILIZER, SURGICAL INSTRUMENT
GGG-A-151 Revision D:1964 ADZ
UU-C-282 Revision D:1974 CHIPBOARD
QQ-C-390 Revision B:1983 COPPER ALLOY CASTINGS (INCLUDING CAST BAR)
GGG-K-00484 Revision D:1966 KNIFE, POCKET, (HEAVY DUTY)
GGG-P-643 Revision A:1968 PULLER KIT, MECHANICAL
TT-P-605 Revision B:1976 PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS)
XX-C-2816 Revision A:2016 COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER
L-P-387 Revision A:1963 PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES)
ASTM F 800 : 1989 Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992)
O-L-172 Revision A:1967 LEATHER DRESSING, VESICANT GAS RESISTANT
ASTM A 706/A706M : 2016 : REDLINE Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A-A-2798 Base Document:1992 LEAD, SYNTHETIC
CCC-C-46 Revision D:1986 CLOTH, CLEANING, NONWOVEN FABRIC
A-A-975 Revision A:0199 LEAD, DRAWING
O-G-491 Revision D:1992 GLYCEROL, TECHNICAL (HIGH GRAVITY)
O-O-670 Revision C:1991 ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL
MIL-DTL-39032 Revision E:2000 RESISTORS, PACKAGING OF
NNN B 175 : C BEAKER LABORATORY GLASS
DDD-B-40 Revision A:1958 BANDAGE, CANTON FLANNEL
L-P-399 Revision B:1970 PLASTIC MOLDING MATERIAL, ION MATERIAL, STYRENE ACRYLONITRILE COPOLYMERS
MIL-DTL-55330 Revision C:2001 CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
AASHTO M 322M/M 322 : 2010 SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT
PPP-C-96 Revision E:1992 CAN, METAL, 28 GAGE AND LIGHTER
ASTM A 856/A856M : 2003 : R2014 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM C 508 : 2000 : R2004 Standard Specification for Asbestos-Cement Underdrain Pipe
GG-S-935 Revision A:1977 SYRINGES, HYPODERMIC, NEEDLE LOCK, GLASS, 3 ML (CC)
C-N-200 Revision A:1961 NEATS FOOT OIL
L-P-527 Revision B:1973 PLASTIC SHEET, STYRENE-BUTADIENE
GGG-P-00474 Base Document:1967 PLIERS: HOG RING STAPLE (UPHOLSTERER'S); BRAKE REPAIR (BRAKE SPRING): AND HOSE CLAMP (WIRE)
O-A-451 Revision F:1975 AMMONIUM HYDROXIDE, TECHNICAL
MIL-P-51406 Revision A:1984 PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE
A-A-2752 Base Document:0199 INK, WRITING FOR FOUNTAIN AND DIP PENS
A-A-2784 Base Document:1992 INK, ROLL
TT-E-781 Revision D:1992 ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL
ASTM F 480 : 2014 : REDLINE Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM C 220 : 1991 : R2004 Standard Specification for Flat Asbestos-Cement Sheets
ASTM A 600 : 1992 : REV A : R2016 Standard Specification for Tool Steel High Speed
ASTM F 872 : 1984 : R1990 Specification for Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable (Withdrawn 1999)
ASTM C 663 : 1998 : R2003 : EDT 2 Standard Specification for Asbestos-Cement Storm Drain Pipe
ASTM A 818 : 2006 : R2016 Standard Specification for Coppered Carbon Steel Wire
ASTM A 834 : 1995 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM C 668 : 1998 : R2008 Standard Specification for Asbestos-Cement Transmission Pipe
ASTM B 176 : 2018 : REDLINE Standard Specification for Copper-Alloy Die Castings
ASTM A 779/A779M : 2016 : REDLINE Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
ASTM A 911/A911M : 2015 : REDLINE Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
ASTM F 1348/F1348M : 1991 : R2002 Standard Specification for Pneumatic Rotary Descaling Machines
ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM F 2658 : 2007 : R2013 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM C 296/C296M : 2000 : R2015 Standard Specification for Asbestos-Cement Pressure Pipe (Withdrawn 2021)
ASTM A 500 : 2003 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A 853 : 2004 : R2010 Standard Specification for Steel Wire, Carbon, for General Use
ASTM F 1336 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F 2623 : 2015-01 SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING
ASTM F 1735:2009 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM B 168 : 2011(R2016) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip
ASTM F 2658 : 2007 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM A 519/A519M : 2017 : REDLINE Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A 623 : 2016 : REDLINE Standard Specification for Tin Mill Products, General Requirements
ASTM B 167 : 2011 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
ASTM C 223 : 1998 : R2003 Standard Specification for Asbestos-Cement Siding
ASTM A 764 : 2007 : R2017 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM F 1733 : 2013 : REDLINE Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM F 441/F441M : 2015 : REDLINE Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ASTM B 211M : 2012 : EDT 1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019)
ASTM F 845 : 1996 Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)
ASTM A 220/A220M : 1999 Standard Specification for Pearlitic Malleable Iron
ASTM A 764 : 2007 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A 135/A135M : 2009 Standard Specification for Electric-Resistance-Welded Steel Pipe
ASTM F 437 : 2015 : REDLINE Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM A 615/A615M : 2016-03 SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM C 746 : 1990 : R2008 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
ASTM B 85 : 2003 Standard Specification for Aluminum-Alloy Die Castings
ASTM A 818 : 2006 : R2010 Standard Specification for Coppered Carbon Steel Wire
ASTM A 421/A421M : 2015 : REDLINE Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A 686 : 1992 : R2004 Standard Specification for Tool Steel, Carbon
ASTM A 854/A854M : 2008 : R2013 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM C 663 : 1998 : R2014 Standard Specification for Asbestos-Cement Storm Drain Pipe (Withdrawn 2019)
ASTM F 1665 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM F 1345 : 2010 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM A 29/A29M : 2016 : REDLINE Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM F 1183 : 1996 : R2006 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM D 2282 : 1999 : R2005 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007)
ASTM F 1145 : 2005 Standard Specification for Turnbuckles, Swaged, Welded, Forged
ASTM D 2680 : 2001 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM C 1447/C1447M : 2004 : EDT 1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM A 519 : 2006 : R2012 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM F 1697:2009 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit <a href="#fn00002"></a>
ASTM B 236 : 2007 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
ASTM E 674 : 2012 : R2016 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM F 1665 : 2008 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM F 3253 : 2017 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
ASTM B 80 : 2015 : REDLINE Standard Specification for Magnesium-Alloy Sand Castings
ASTM B 865 : 2004 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM A 681 : 2008 : R2015 Standard Specification for Tool Steels Alloy
ASTM C 223 : 1998 : R2008 Standard Specification for Asbestos-Cement Siding
ASTM F 2562/F2562M : 2015 : REDLINE Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 1665 : 2008 : R2013 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM E 786 : 1981 : R2017 Standard Specification for Dishes, Evaporating, Platinum
ASTM B 211 : 2012 : EDT 1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM B 236M : 2007 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
KK-L-154 Revision F:1976 LEATHER, CATTLEHIDE, (BAG AND CASE)
GGG-G-521 Revision E:1988 GOGGLES, INDUSTRIAL, RESILIENT FRAME
ASTM A 905 : 2004 : R2017 Standard Specification for Steel Wire, Pressure Vessel Winding
GG H 1488 : A NOTICE 1 HOLDER, DESK TRAY LABEL
HH-I-1972-2 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, ASPHALT/ASBESTOS FELT OR ASPHALT/GLASS FIBER FELT ON BOTH SIDES OF THE FOAM
P-P-121 Revision D:1974 PAPER, ABRASIVE, GARNET
TT L 34 : B INT AMD (1) LACQUER, (WORKABLE FIXATIVE) NITROCELLULOSE (IN PRESSURIZED DISPENSERS)
ASTM F 2881 : 2011 : R2015 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
JJJ-S-791 Revision L:1974 SUGAR, REFINED AND BROWN: BEET OR CANE
U-A-408 Revision A:1965 ALCOHOL, DEHYDRATED, ANALYZED REAGENT
WW-P-405 Revision B:1974 PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED)
L-C-001676 Base Document:1970 CUSHION, CARPET AND RUG, VIRGIN URETHANE
GG-T-321 Revision D:1977 THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS
MIL-M-51282 Revision D:1986 MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1
PPP-B-638 Revision B:1975 BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF
GGG-D-326 Revision C:1964 DIGGER; POSTHOLE, HINGED
MIL-D-10131 Revision B:0197 DISC, INLET VALVE
DDD-R-00255 Base Document:1971 RIBBON, ADDRESS PLATE MACHINE
GGG-K-471 Revision C:1963 KNIFE, DRAW
PPP-B-28 Revision A:1973 BAG, PLASTIC (SANDWICH)
NNN-W-25 Revision B:1976 WASH BOTTLES LABORATORY
GGG-B-121 Revision B:1964 BAR, SINE; PLATE SINE (AND FIXTURES)
AA-F-355 Revision B Interim Revision:1972 FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED
MIL-P-51402 Base Document:1975 PLASTIC SHEET, POLYPROPYLENE POLYETHYLENE LAMINATE FILM
O-D-210 Revision A:1976 DESICCANT, ACTIVATED, CALCIUM SULFATE, ANHYDROUS
MIL-E-51420 Revision A:1983 EDGESEAL MATERIAL, CHEMICAL-BIOLOGICAL FILTER
GGG-V-410 Revision B:1993 VISE, BENCH BASE; SHEET METAL-WORKER'S; BENCH AND PIPE; JEWELER'S; MACHINISTS; AND MULTIPOSITION
GGG W 631 : B INT AMD (5) WRENCH ADJUSTABLE OPEN END AUTO AND MONKEY
SS-C-646 Revision B:1969 CRAYON, MARKING, LUMBER
MMM-A-250 Revision C:1975 ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES)
NNN C 435 : B NOTICE 1
HH-I-1972-4 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM
PPP-T-495 Revision B:1974 TUBES, MAILING, AND FILING
GGG-B-351 Revision B:1963 BIN, STORAGE AND DISPLAY, ROTARY
FF-W-100 Revision C:1969 WASHER, LOCK, TOOTH
ASTM F 1499 : 2017 : REDLINE Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
PPP-P-1134 Revision D:1983 PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS)
GGG-M-125-5 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS, FUMES, AND MISTS)
ASTM C 659 : 1990 : R2014 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels (Withdrawn 2019)
KK-L-254 Revision D:1975 LEATHER, SHEEPSKIN, CHROME TANNED
O-I-1279 Revision B:1993 ION EXCHANGE RESINS
A-A-3002 Base Document:1996
BB-C-104 Revision B:1971 CARBON DIOXIDE, TECHNICAL: SOLID
GG-D-465 Revision A:1977 DISTILLING APPARATUS, LABORATORY
WW P 1432 : C PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED
QQ-C-530 Revision C:1971 COPPER BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173)
TT-E-751 Revision C:1967 ETHYL ACETATE, TECHNICAL
MIL S 003793 : C NOTICE 2 SMOKE POT, HC, 30 POUND, ABC-M5 COMPONENTS FOR
FF-H-001687 Revision B:1976 LOCKS, OFFICE MACHINE
GGG-H-575 Base Document:1962 HOLDERS; SHEET METAL, HOLE AND EDGE GRIP
MIL C 51073 : D COUPLING HALF, QUICK DISCONNECT
O-S-595 Revision B:1967 SODIUM DICHROMATE, DIHYDRATE, TECHNICAL
L-P-383 Base Document:1967 PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED
TT-C-520 Revision B:1973 COATING COMPOUND BITUMINOUS SOLVENT TYPE UNDERBODY
GGG-B-451 Revision D:1968 BLADE, HAND HACKSAW AND BLADE, POWER HACKSAW
GG-B-823 Revision C:1975 BURS, DENTURE TRIMMING, HIGH SPEED TOOL STEEL
WW-P-521 Revision G:1977 PIPE FITTINGS, FLANGE FITTINGS, AND FLANGES, STEEL AND MALLEABLE IRON (THREADED AND BUTT WELDING) CLASS 150
GGG-N-398 Revision A:1963 NUT RUNNER, PNEUMATIC, PORTABLE
GGG-S-69 Revision D:1983 SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY)
L-P-00315 Revision D:1976 PIPE AND TUBING, NONMETALLIC (PLASTIC)
AAA-B-92 Revision D:1977 BALANCE, ANALYTICAL
FF-T-305 Revision C:1974 THUMBSCREW
JJJ-S-351 Revision H:1981 SYRUP
GGG-T-001310 Base Document:1967 TAPE, FISH, STEEL
KKK-R-2800 Base Document:1993 RAILWAY CAR SPOTTER, SELF-PROPELLED, GED OR DED
TT-N-95 Revision B:1967
JJ-U-513 Revision D:1975 UNDERSHIRT, MAN'S, (QUARTER-SLEEVE)
GGG-K-481 Revision D:1995 KNIFES; CRAFTSMAN'S, (HAWKBILL, SHOE, CHIPPING) PUTTY AND SCRAPING
UU T 94 : C NOTICE 1 TAPE, EMBOSSING
ASTM C 1447/C1447M : 2004 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
NNN-S-1356 Revision B:1978 SPATULA LABORATORY (METAL BLADE)
ASTM A 159 : 1983 : R2001 Standard Specification for Automotive Gray Iron Castings
ASTM A 184/A184M : 2017 : REDLINE Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
ASTM A 47/A47M : 1999 : R2014 Standard Specification for Ferritic Malleable Iron Castings
UU-B-790 Revision A:1968 BUILDING PAPER, VEGETABLE FIBER, (KRAFT, WATERPROOFED, WATER REPELLENT AND FIRE RESISTANT)
HH-I-435 Revision B:1977 INSULATORS, ELECTRIC, PORCELAIN AND GLASS
L-P-513 Revision C:1968 PLASTIC SHEET AND INSULATION SHEET, ELECTRICAL (LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN)
G-D-331 Revision D:1974 DICTIONARIES, ENGLISH
GG-I-271 Revision C:1964 IGNITER, FRICTION, OXYACETYLENE-TORCH
ASTM F 781 : 1995 Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
ASTM C 746 : 1990 : R2003 : EDT 1 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
FF-P-386 Revision D:1971 PIN, COTTER (SPLIT)
A-A-2770 Base Document:1992 PENCIL, COPYING
FF-P-101 Revision F:1984 PADLOCK
QQ-M-38 Revision B:1969 MAGNESIUM ALLOY DIE CASTINGS (AZ91A)
SS-S-210 Revision A:1975 SEALING COMPOUND, PREFORMED PLASTIC FOR EXPANSION JOINTS & PIPE JOINTS
GGG-D-751 Revision D:1989 DRILLS, TWIST (TAPER-SQUARE, STRAIGHT, AND TAPER-ROUND SHANKS)
GGG-R-00620 Base Document:1965 ROLLER, HAND (RUBBER ROLLER)
ASTM F 1697 : 2009 : R2015 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
HH-M-622 Revision D:1977 MORTAR, REFRACTORY: HEAT SETTING AND AIR SETTING, BONDING (WET AND DRY TYPES)
DDD-P-351 Revision H:1978 PILLOWCASE, COTTON AND POLYESTER/COTTON
AA C 0010 : B CABINET, BEDSIDE, METAL, HOSPITAL TYPE
H R 550 : B NOTICE 1 ROLLER, KIT, PAINT
DD-P-00355 Revision A:1975 PIPET, DROPPING, GLASS OR PLASTIC
GG-P-181 Revision C:1963 PENHOLDERS (WRITING)
L-P-391 Revision D:1975 PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS)
ASTM E 454 :2012 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
AA-F-001873 Revision A:1977 FURNITURE, CONTEMPORARY, OAK (GENERAL SPECIFICATION)
DDD-A-1466 Revision C:1991 APRON, CONSTRUCTION WORKER'S
GG-R-1549 Revision A:1986
FF-O-605 Revision B:1973 OPENER, CAN, HAND (DISPOSABLE, COMBINATION OPENER AND PUNCH)
GGG-T-00870 Revision B:1966 TWEEZERS, CRAFTSMAN'S
TT-V-121 Revision H:1978 VARNISH, SPAR, WATER RESISTING
FF C 00431 : B CLIP, PAPER (BINDER)
NNN-B-585 Revision B:1979 BOX MICROSCOPE SLIDE PLASTIC
A-A-2762 Base Document:1992 TYPING ELEMENT (DAISY WHEEL, DISK TYPE)
PPP-C-1842 Revision B:1992 CUSHIONING MATERIAL, PLASTIC, OPEN CELL (FOR PACKAGING APPLICATIONS)
AA-B-2825 Base Document:1994 BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK
KKK-C-650 Revision E:1985 CREEPER, MECHANIC'S
FF-P-416 Revision E:1963 PIN, SAFETY
L B 00565 : A BOX, INDEX CARD, PLASTIC
NNN G 698 : C GRID WIRE GAUZE LABORATORY
NNN R 560 : A ROD STIRRING LABORATORY
GGG-T-0030 Base Document:1965 TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED)
GG O 00588 : C OPENER, LETTER, HAND, METAL
P-C-433 Revision B:1976 CLEANING COMPOUND, ALKALI, PIPELINE
HH-I-521 Revision F:1980 INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES)
HH-I-553 Revision C:1975 INSULATION TAPE, ELECTRICAL, (RUBBER, NATURAL AND SYNTHETIC)
JJ-S-750 Revision A:1967 STRAP, WEBBING
GGG-S-00275 Base Document:1965 SHEARS, BARBERS
FF-B-195 Base Document:1960 BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED)
GGG-C-00555 Revision B:1966 COMPRESSOR, PISTON RING, BAND-TYPE
PPP-P-1875 Base Document:1975 PREPARATION FOR DELIVERY REQUIREMENTS FOR CHAIRS, METAL AND PLASTIC, OFFICE
AA-S-75 Revision A:1975 SAFE, DENTAL X-RAY FILM PROTECTIVE
DDD-D-626 Revision A:1959 DRAPE, SURGICAL, CLOTH
GG-C-121 Base Document:1959 CANNULA, BRAIN, FRAZIER
QQ-B-626 Revision D:1973 BRASS, LEADED & NONLEADED ROD, SHAPES, FORGINGS & FLAT PRODUCT WITH FINISHED EDGES (BAR & STRIP)
GGG-W-001405 Base Document:1968 WRENCH, BOX (RATCHETING)
MIL R 28750 : C SUPP 1 RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING
MIL-P-51403 Base Document:1974 PLASTIC SHEET, VINYL, FLEXIBLE
GGG-T-563 Revision A:1958 TOOLS, BLACKSMITHS': CHISELS, FLATTERS, FULLERS, SET HAMMERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES
GGG-D-671 Revision D:1964 DRILL; HAND, AND PUSH
AA-F-2815 Base Document:1992 FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE)
GGG-W-00645 Revision B:1967 WRENCH, OPEN END BOX (AND BOX COMBINATION CROWFOOT, RATCHET, AND RATCHET CROWFOOT)
DDD T 00101 : A NOTICE 1 TAPE, TEXTILE, COTTON, TYING
NNN-R-770 Base Document:1966 RULE LABORATORY (MEASURING PLASTIC AND WOOD)
CCC-W-51 Revision D:1975 WADDING, COTTON, SURGICAL
GG-A-440 Revision C:1981 ALIDADE, SURVEYING, TELESCOPE
GG-N-350 Base Document:1961 NIPPER, INGROWN TOENAIL
MIL-D-0050082 Revision K:1983 DISKS, INLET AND NOSECUP VALVE
GGG-S-793 Revision A:1964 STRIPPER, WIRE, BENCH
GGG-C-315 Revision A:1967 CHISEL, BRICK
TT-L-132 Base Document:1966 LITHOGRAPHIC PLATE ASPHALTUM SOLUTION
GGG-S-65 Revision C:1992 SAW, HAND
ASTM F 949 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
HH-I-1972-5 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM
UU B 001254 : NOTICE 1 BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER
GGG-S-51 Revision E:1995 SAW, CIRCULAR, PORTABLE, ELECTRIC
QQ-B-613 Revision D:1973 BRASS, LEADED AND NONLEADED, FLAT PRODUCTS (PLATE, BAR, SHEET AND STRIP)
KK-G-476 Revision E:1976 GLOVES, LEATHER, GAUNTLET, LINEMEN'S
ASTM F 1533 : 2001 : R2009 Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018)
GGG-N-202 Revision C:1971 NEEDLE, SAILMAKER'S
ASTM F 2929 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
MMM-A-130 Revision B:1974 ADHESIVE CONTACT
ASTM A 886/A886M : 2017-11 SPECIFICATION FOR STEEL STRAND, INDENTED, SEVEN-WIRE STRESS-RELIEVED FOR PRESTRESSED CONCRETE
MIL-C-24723 Base Document:1989 CASTINGS, NICKEL-COPPER ALLOY
GGG-P-791 Revision C:1961 PULLERS, NAIL, HAND
O H 00765 : D HYDROCHLORIC ACID, TECHNICAL
MMM-A-00150 Revision B:1976 ADHESIVE FOR ACOUSTICAL MATERIALS
GG-A-614 Base Document:1960 APPLICATOR, METAL
GGG-T-350 Revision B:1966 TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON
TT-R-230 Revision B:1968 REMOVER, PAINT (ALKALI TYPE FOR HOT APPLICATION)
O-C-828 Revision C:1980 CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL
AASHTO M 280 : 2014 SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE
O-D-1271 Revision B:1985 DIETHYLENETRIAMINE, TECHNICAL
UU-P-561 Revision H:1972 PAPER, TRACING
ASTM B 90/B90M : 2015 : REDLINE Standard Specification for Magnesium-Alloy Sheet and Plate
QQ-M-44 Revision B:1964 MAGNESIUM ALLOY PLATE AND SHEET (AZ31B)
TT E 00488 : B ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS)
MIL-G-46693 Revision F:1976 GRENADE, HAND-RIFLE, SMOKE, WP, M34, INERT COMPONENTS
MIL-B-25337 Revision B:1970 BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT
FF-W-84 Revision A:1967 WASHER, LOCK (SPRING)
NNN-S-750 Base Document:1962 STAND LABORATORY APPARATUS SUPPORT
GG-M-001342 Base Document:1968 MARKER, TUBE TYPE, FINE TIP, TRANSPARENCY
GG-M-001130 Base Document:1966 MARKER, TUBE TYPE, FINE TIP
QQ-Z-301 Revision C:1964 ZINC SHEET AND STRIP
GG C 00289 : NOTICE 1 CHISELS, DENTURE-TRIMMING
DDD-C-641 Revision B:1964 CURTAIN, AIR PORT, CURTAIN, DOORWAY AND CURTAIN FIXTURES
TT-E-776 Revision B:1960 ETHYLENE GLYCOL MONOBUTYL ETHER (FOR USE IN ORGANIC COATINGS)
GG S 00928 : C SYRINGE, METAL, EAR
MIL C 17-112 : A CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304
GG-M-105 Revision D:1977 MALLET, ORAL SURGERY
PPP-T-1150 Revision B:1978 TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF
GG-B-2043 Base Document:1977 BRUSH, SURGICAL SCRUB
L-P-600 Revision A:1972 PORTFOLIO, PLASTIC
EE-B-575 Revision E:1989 BOUILLON (SOUP AND GRAVY BASES)
GGG-T-00559 Base Document:1964 TOOL KIT, LEATHERCRAFT
KK-C-1535 Revision B:1976 CASE, DISPATCH, MOLDED PLASTIC (METAL FRAME)
L-F-36 Revision C:1963 FACESHIELD, INDUSTRIAL
GGG T 00671 : B (1) TROWELS
O-H-205 Revision D:1976
DD-T-733 Base Document:1960 TUBE, HYPODERMIC NEEDLE PROTECTING
MIL-F-51481 Base Document:1981 FILTER MATERIAL, LAMINATED PAPER, TEN-PLY
ASTM C 220 : 1991 : R1999 Standard Specification for Flat Asbestos-Cement Sheets
GG-S-945 Revision A:1959 SYRINGE AND NEEDLE, DISPOSABLE, HYPODERMIC, STERILE, SINGLE INJECTION
PPP-C-843 Revision D:1977 CUSHIONING MATERIAL, CELLULOSIC
PPP-B-640 Revision D:1966 BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL
O-S-576 Revision F:1967 SODIUM BICARBONATE, TECHNICAL
MMM-A-188 Revision C:1975 ADHESIVE UREA-RESIN=TYPE (LIQUID AND POWDER)
W-B-137 Revision C:1973 BATTERY, STORAGE, (NICKEL-ALKALINE, INDUSTRIAL, FLOATING SERVICE)
ASTM F 2619/F2619M : 2013 : REDLINE Standard Specification for High-Density Polyethylene (PE) Line Pipe
SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
ASTM A 809 : 2008 : R2013 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM F 439 : 2013 : REDLINE Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM C 1450/C1450M : 2004 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
MIL-F-51536 Base Document:1988 FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56
ASTM B 90M : 1990 Specification for Magnesium-Alloy Sheet and Plate (Metric) (Withdrawn 1993)
ASTM A 797 : 1982 Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988)
ASTM A 878/A878M : 2017-09 SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY
ASTM A 749/A749M : 2014 : REDLINE Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM A 48/A48M : 2003 Standard Specification for Gray Iron Castings
ASTM D 2852 : 2016 : REDLINE Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
ASTM C 221 : 1998 : R2003 Standard Specification for Corrugated Asbestos-Cement Sheets
ASTM B 163 : 2011 : EDT 2 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM A 823 : 1999 : R2008 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
ASTM E 674 : 2012 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E 784 : 1989 : R2000 : EDT 1 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM A 21 : 1994 : R1999 Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003)
ASTM C 222 : 1997 : R2014 Standard Specification for Asbestos-Cement Roofing Shingles (Withdrawn 2019)
ASTM C 220 : 1991 : R2009 Standard Specification for Flat Asbestos-Cement Sheets
ASTM A 681:2008 Standard Specification for Tool Steels Alloy
ASTM C 659 : 1990 : R2003 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
ASTM B 483/B483M : 2013 : EDT 1 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
ASTM C 659 : 1990 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
ASTM B 32 : 2008 Standard Specification for Solder Metal
ASTM C 1449/C1449M : 2005 : REV A : R2014 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
ASTM C 221 : 1998 : R2014 Standard Specification for Corrugated Asbestos-Cement Sheets (Withdrawn 2019)
ASTM F 1335 : 2004 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)
ASTM B 236M : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024)
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM A 555/A555M : 2016 : REDLINE Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A 809 : 2008 : R2017 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM A 686 : 1992 : R2016 Standard Specification for Tool Steel, Carbon
ASTM C 875 : 1998 Standard Specification for Asbestos-Cement Conduit
ASTM F 1735 : 2009 : R2015 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM A 600 : 1992 : REV A : R1999 Standard Specification for Tool Steel High Speed
ASTM A 1000 : 2005 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
ASTM F 1183 : 1996 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM C 222 : 1997 : R2008 Standard Specification for Asbestos-Cement Roofing Shingles
ASTM B 168 : 2011 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,
ASTM F 492 : 1995 Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
ASTM E 323 : 2011 : R2016 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM F 1412 : 2016 : REDLINE Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM F 679 : 2016 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM A 491 : 2011 : R2017 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
ASTM F 423 : 1995 Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
ASTM C 220 : 1991 : R2004 : EDT 1 Standard Specification for Flat Asbestos-Cement Sheets
ASTM A 480/A480M : 2017-11 SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP
ASTM A 116 : 2011 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
ASTM D 2467 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM B 774 : 2000 : R2014 Standard Specification for Low Melting Point Alloys
ASTM D 2235 : 2004 : R2016 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM F 1040 : 1987 : R2007 Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable (Withdrawn 2012)
ASTM F 1040 : 1987 : R1993 Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable
ASTM F 1040 : 1987 : R2001 Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable
ASTM F 289 : 1996 : R2002 Standard Specification for Molybdenum Wire and Rod for Electronic Applications
ASTM B 404/B404M : 2002 Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins (Withdrawn 2006)
ASTM F 771 : 1999 : R2005 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014)
SAE AMS I 538 : 2016 INSULATION, ELECTRICAL, PASTED-MICA
ASTM D 2750 : 1995 Specification for Acrylonitrile- Butadiene-Sytrene (ABS) Plastics Utilities Conduit and Fittings (Withdrawn 1997)
PPP-B-2122 Base Document:1981 BOX, FOLDING (PAPERBOARD, FOR ARCHIVAL MICROFICHE)
RR-S-617 Revision D:1974 SPOON, FOOD SERVICE, BASTING, STRAINING AND MIXING
GGG-L-795 Revision E:1990 LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
ASTM B 483/B483M : 2013 Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications
FF-B-561 Revision D:1989 BOLT, (SCREW), LAG
L E 530 : A ENVELOPE, TRANSPARENT
PPP-P-001944 Base Document:1976 PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE
RR-P-00560 Base Document:1967 POST, LEDGER AND BINDER, SCREW-TYPE
PPP-B-566 Revision E:1974 BOX, FOLDING, PAPERBOARD
FFF-C-641 Revision D:1975 SHAVING SOAP AND SHAVING CREAM
GGG-K-266 Revision B:1964 KEY, COWL FASTENER
MIL-S-0010133 Revision D:1974 SEAT, OUTLET-VALVE, ALUMINUM-BASE-ALLOY DIECASTING FOR OUTLET VALVE, C15
EE-I-1699 Base Document:1972 ICE CREAM MIXES, REGULAR AND IMITATION, DEHYDRATION
QQ-B-650 Revision C:1987 BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS
DD-W-131 Revision C:1958 WATCH GLASS, LABORATORY
TT I 00549 : C NOTICE 1 INK, WRITING, COLORED (NON-PERMANENT)
PPP-H-1581 Revision A:1977 HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF
PPP-B-1055 Revision B:1975 BARRIER MATERIAL, WATERPROOFED FLEXIBLE
O-C-430 Revision A:1975 CLEANING COMPOUND, PAINT BRUSH
QQ-T-580 Revision C:1977 TOOL STEEL, CARBON AND CARBON VANADIUM
L-P-410 Revision A:1966 PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS
GGG-W-644 Revision C:1992 WRENCH, SOCKET (WHEEL NUT)
L-P-512 Revision C:1977 PLASTIC SHEET (SHEETING); POLYETHYLENE
PPP-B-1980 Base Document:1977 BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF
AASHTO M 55M/M 55 : 2013 METHOD OF TEST FOR STEEL WELDED WIRE REINFORCEMENT, PLAIN, FOR CONCRETE
TT W 535 : C NOTICE 2 WOOD PRESERVATIVE, FLUOR CHROME ARSENATE PHENOL MIXTURE
HH P 1784 : NOTICE 1 PAPER, ASBESTOS
PPP-B-636 Revision J:1981 BOX, SHIPPING, FIBERBOARD
GGG-V-415 Revision A:1967 VISE, PIPE
HHH-V-1867-2 Base Document:1974 CARROTS, FRESH, READY-TO-USE
GG-R-001200 Base Document:1986 INTERIM FEDERAL SPECIFICATION - RULER, PLASTIC, DESK
P-P-200 Revision D:0197 PEN CLEANER, LIQUID
GG-B-00596 Revision B:1970 BOUGIE, EUSTACHIAN, SET OF FIVE
SS P 201 : D NOTICE 1 PENCIL, NONMECHANICAL, COLORED LEAD
O-C-940 Revision B:1975 CYCLOHEXYLAMINE, TECHNICAL
NNN T 792 : A NOTICE 1 TUBE DRYING LABORATORY
A-A-3186 Base Document:2002 FILE CABINETS, VERTICAL, STEEL
AA-F-00360 Revision B Interim Revision:2002 FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL)
L-P-1036 Revision A:1974 PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL CHLORIDE, RIGID
QQ-T-570 Revision C:1977 TOOL STEEL, ALLOY
GGG-F-00626 Revision A:1994 FORK, STONE, HAND, D-HANDLE
TT-S-222 Revision B:1967 SEALING COMPOUND, ASBESTOS
ASTM A 805/A805M : 2009 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
AA-S-00275 Base Document:1964 SHELVING, STORAGE AND DISPLAY, STEEL, BOLTLESS
GGG-W-648 Revision B:1992 WRENCH, LINEMAN'S
KKK-T-654 Revision D:1985 TRUCK, DOLLY (ROLLER)
QQ A 325 : B ALUMINUM ALLOY BARS, RODS, WIRE, AND SPECIAL SHAPES, ROLLED, DRAWN OR COLD FINISHED 6061.
NNN-T-580 Base Document:1963 TONG LABORATORY
WW-P-404 Revision D:1973 PIPE, STEEL (SEAMLESS & WELDED, BLACK & ZINC COATED) (GALVANIZED)
GG-B-00686 Revision D:1973 BROACHES, PULP CANAL, BARBED, DENTAL
ASTM F 771 : 1999 : EDT 1 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
GGG-P-00335 Revision A:1970 PIKE POLE
L-P-393 Revision A:1964 PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION
KK-L-291 Revision G:1969 LEATHER, CATTLEHIDE, UPHOLSTERY
MIL-C-83360 Revision C:1975 CLEANING AND LUBRICATING COMPOUND, ELECTRICAL CONTACT
MMM-A-187 Revision B:1968 ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE
L T 0030 : NOTICE 1 TAB, SIGNAL, PLASTIC, TAB SET, SIGNAL, PLASTIC
AA-C-295 Revision A Interim Revision:1963 CHAIRS, ROTARY, STEEL, TUBULAR SPECIAL PURPOSE
HH-M-351 Revision E:1976 MILLBOARD, ASBESTOS
GGG-S-283 Revision A:1967 SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE)
NNN-B-300 Revision A:1977 BLOOD COLLECTING CULTURE UNIT LABORATORY
SS-T-312 Revision B:1974 TILE, FLOOR, ASPHALT, RUBBER, VINYL, VINYL-ASBESTOS
O-L-160 Revision A:1967 LEAK PREVENTIVE COMPOUND, RADIATOR
GGG-S-001333 Revision A Interim Revision:1975 SCRAPER AND SQUEEGEE, VEHICLE WINDOW
NNN-G-692 Revision C:1970 GRADUATE LIQUID LABORATORY AND PHARMACEUTICAL GLASS
L-R-00335 Revision A:1966 RIBBON, FLAGGING, SURVEYOR'S, PLASTIC
GG-S-743 Revision C:1975 STAND, SURGICAL INSTRUMENT
DD-G-511 Revision E:1983 GLASS, TUBING, ROUND
WW-C-1692 Revision A:1973 COUPLING ASSEMBLY AND MENDER, HOSE, HOSE (PLASTIC AND RUBBER)
AA-B-00540 Revision D Interim Revision:1978 BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE
L-P-370 Revision C:1972 PLASTIC FILM, SHEET AND STRIP (POLYVINYL CHLORIDE, COPOLYMER OF VINYLIDENE CHLORIDE AND VINYL CHLORIDE, OR POLYETHYLENE)
GG-C-00620 Revision F:1976 COUNTER, RECIPROCATING, HAND HELD
GGG-P-00340 Revision A Interim Revision:1967 PIN STRAIGHTENER, ELECTRON TUBE
GG-C-1969 Revision A:1976 CURETTE, MASTOID, SPRATT
PPP P 700 : C NOTICE 1 PROTECTOR, PACKING LIST
ASTM C 222 : 1997 Standard Specification for Asbestos-Cement Roofing Shingles
GGG-P-453 Revision A:1965 PLATE, SURFACE, CAST IRON
GGG-D-00643 Revision A Interim Revision:1968 DRIFTPIN (DOUBLE TAPER)
MIL-R-0050068 Revision D:1983 RING, CRIMPING (FOR ABC-M17 MASK)
GGG-C-2773 Base Document:1992 CYLINDER RECONDITIONING & CORRECTION EQUIPMENT - PORTABLE
MMM-A-260 Revision C:1984 ADHESIVE WATER RESISTANT (FOR SEALING WATERPROOFED PAPER)
GGG-B-461 Revision A:1966 BLOCKS, STEP, MACHINISTS'
MIL-P-51396 Revision A:1979 PUMP UNIT, LIQUID VACUUM, POWER DRIVEN
GGG-V-445 Revision A:1966 VICE, WOODWORKER'S AND PATTERNMAKER'S
EE-M-131 Revision G:1979 MAYONNAISE AND SALAD DRESSING
MIL-C-51177 Revision B:1974 COUPLING, CANISTER, ABC M1
HHH-V-1867-3 Revision A:1975 LETTUCE, FRESH, READY-TO-USE
GGG-J-60 Revision A:1967 JACK KIT, HYDRAULIC, HAND (WITH TRUCK OR CHEST)
GG-S-1340 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
MIL S 19491 : G SEMICONDUCTOR DEVICE, PACKAGING OF
ZZ-T-381 Revision Q:1989 TIRES, PNEUMATIC, VEHICULAR (HIGHWAY)
QQ-B-575 Revision C:1993 BRAID, WIRE, (COPPER, TIN COATED, OR SILVER COATED, TUBULAR, OR FLAT)
MIL-E-51390 Revision A:1979 ELECTRONIC MODULE ASSEMBLY
O-E-950 Revision A:1975 EXTRACT, QUEBRACHO
GGG-B-500 Revision D:2015 BLOCK, TACKLE (WIRE ROPE)
ASTM C 668 : 1998 Standard Specification for Asbestos-Cement Transmission Pipe
GG-S-00792 Base Document:1963 STYLUS, DUPLICATING STENCIL
AA-C-001870 Base Document:1974 COSTUMER, METAL, CONTEMPORARY STYLE
TT C 00598 : C CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION)
HH-P-46 Revision E:1975 PACKING; ASBESTOS, SHEET, COMPRESSED
DD-G-1403 Revision C:1983 GLASS, FLOAT, SHEET, FIGURED, COATED (HEAT-STRENGTHENED AND TEMPERED)
AASHTO MP 18M/MP 18 : 1900 SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS
MIL-DTL-28786 Revision D:2014 SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
PPP-P-40 Revision C:1998 PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY
TT I 00559 : C INK, MARKING STENCIL, OPAQUE, FOR POROUS SURFACES (WOOD BOXES, FIBER CARTONS ETC.)
MIL-F-51367 Revision B:1979 FILTER & UTILITIES UNIT, CHEMICAL-BIOLOGICAL SHELTER SYSTEM, TRAILER MOUNTED: M68
JJJ-A-00711 Revision E:1957 ASPARAGUS, CANNED
RR-K-795 Revision A:1974 KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS)
GG-O-588 Revision B:1964 OPENER, LETTER, HAND, METAL
GG-C-550 Revision B:1988 COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE
MIL-C-17112 Revision A:1973 COPPER-NICKEL-ZINC ALLOY (NICKEL-SILVER): CASTINGS
L-S-626 Revision C:1967 SPONGES, SYNTHETIC
MMM-A-134 Base Document:1970 ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
HH-G-156 Revision E:1993 GASKET MATERIAL, GENERAL PURPOSE, RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES
AA-D-170 Revision A:1976 DESK, FLAT TOP
ASTM F 3308/F3308M : 2018 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications
AA-B-551 Revision D:1973 BOOKENDS, STEEL
GG-T-585 Revision B:1986 TONOMETER, OPHTHALMIC, SCHIOTZ
QQ-G-547 Revision B:1975 GOLD LEAF
TT-I-540 Revision C:1973 INK, NUMBERING AND DATING MACHINE
GG S 00750 : B STENCIL DUPLICATING PRINT KIT, HAND STAMP
LLL-T-1332 Revision A:1973 TOOTHPICKS (WOOD)
MMM-A-185 Revision B:1974 ADHESIVE RUBBER (FOR PAPER BONDING)
TT-I-542 Revision E:1975 INK, MARKING, LAUNDRY, BLACK
FF-P-00416 Revision F:1971 PIN, SAFETY
P-W-155 Revision C:1978 WAX, FLOOR, WATER-EMULSION
DDD-C-48 Revision E:1968 CAP, OPERATING, SURGICAL, GREEN
HH-I-525 Revision A:1968 INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B)
PPP-P-1998 Base Document:1976 PREPARATION FOR DELIVERY REQUIREMENTS FOR STORAGE SECTIONS, OVERFILE, STEEL
BBB-S-1268 Revision B:1973 SWEAT SHIRT
GG-O-635 Revision A:1977 OPTICAL FLATS
GG-C-620 Revision C:1962 COUNTER, RECIPROCATING, HAND-HELD
GG-B-00821 Revision E:1976 BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE
MIL-W-51258 Revision A:1974 WINTERIZATION KIT, FACEPIECE, CHEMICAL BIOLOGICAL MASK, TANK, M3
FF-S-107 Revision C:1969 SCREW, TAPPING AND DRIVE
GG-T-621 Revision C:1985 TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS
GG S 208 : NOTICE 1 SEPARATOR, TEETH, DENTAL, ELLIOTT, CURVED-JAW
MIL-N-51287 Revision C:1983 NOSECUP ASSEMBLIES, CHEMICAL BIOLOGICAL MASK, C10
ASTM F 1803 : 2015 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM D 2680 : 2001 : R2009 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
GGG-T-671 Revision C:1992 TROWELS
PPP-B-587 Revision B:1987 BOX, WOOD, WIREBOUND PALLET TYPE
GG-F-615 Base Document:1961 FORCEPS, SPLINTER
L-P-375 Revision D:1994 PLASTIC FILM, FLEXIBLE, VINYL CHLORIDE
GG-H-0080 Revision A:1967 HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE
GGG-C-430 Revision A:1967 CLEANER, VALVE STEM GUIDE
QQ-C-533 Revision B:1972 COPPER BERYLLIUM ALLOY STRIP (COPPER ALLOY NUMBERS 170 AND 172)
P-D-455 Revision D:1975 DISKS, ABRASIVE, ALUMINUM OXIDE
GGG-O-599 Revision B:1963 OPENER, CRATE
H-B-771 Revision B:1966 BRUSHES, WIRE, ROTARY, GENERAL PURPOSE
WW-H-171 Revision E:1977 HANGERS & SUPPORTS, PIPE (FOR DOD USE - ANSI/MSS-SP-58, ANSI/MSS-SP-69, NFPA 11, 12, 13, 14, 15, 16 & 17
GGG-S-731 Revision A Interim Revision:1967 STAKE, SHEET METALWORKING, AND PLATE, BENCH STAKEHOLDER
T-O-56 Revision A:1970 OAKUM, MARINE
A-A-2098 Revision B:1991 WRAPPER, COIN
AA-C-112 Revision D:1976 CARTS, SURGICAL DRESSING
GGG-S-278 Revision B:1994 SHEARS AND SCISSORS
GG-G-00650 Revision A:1970 GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE
MIL P 0050085 : D PRECLEANER, AIR PURIFIER, M1A1
GGG C 00748 : C CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS
MIL-C-51386 Revision A:1979 CASE, DETECTOR UNIT, CHEMICAL AGENT AUTOMATIC ALARM
GGG-B-110 Revision A:1966 BAR, COMBINATION PRY AND SCRAPER
ASTM B 32 : 2008 : R2014 Standard Specification for Solder Metal
NNN D 350 : A NOTICE 1 DISH GUM TEST
DD-B-601 Base Document:1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITRES
NNN-T-698 Base Document:1963 TRIPOD LABORATORY APPARATUS
RR W 375 : A NOTICE 1 WIRE, FABRIC, STEEL, WELDED, (FOR REINFORCED CONCRETE)
GG W 00101 : C WASHERS, BEDPAN AND URINAL
L R 00350 : A RIBBONS, TYPEWRITER AND COMPOSING MACHINE, CHANGEABLE TYPE STYLE, POLYETHYLENE
P-S-120 Revision B:1977 SCALE REMOVING COMPOUND (SOLID AND LIQUID FORM)
L-P-519 Revision C:1977 PLASTIC SHEET: TRACING, GLAZED AND MATTE FINISH
GG S 00176 : C SCREEN, X-RAY INTENSIFYING
NNN E 00920 : B EXTRACTION ASSY
DDD-T-551 Revision K:1977 TOWEL, BATH, COTTON, TERRY
HH-I-545 Revision B:1971 INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL)
AA-V-200 Revision B Interim Revision:1973 VENETIAN BLINDS
UU-C-225 Revision A:1972 CARTON, EGG
PPP-C-850 Revision D:1964 CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES)
GG-F-355 Revision A:1975 FINGERPRINT IDENTIFICATION KITS
KK-W-266 Revision A:1961 WHEEL, BUFFING, CHAMOIS, 3 INCH
LLL B 800 : B NOTICE 1 BUILDING BOARD (WOOD PARTICLEBOARD) HARD PRESSED VEGETABLE FIBER
FF-C-88 Revision C:1971 CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY
PPP-P-115 Revision D:1973 PAD, PAPER, MACERATED
JJJ-C-561 Revision E:1978 COTTON, PURIFIED (STERILE) AND NONSTERILE
LLL-C-83 Revision B:1977 CANES, WALKING
QQ-B-654 Revision A:1980 BRAZING ALLOY, SILVER
FF-W-1825 Revision A:1976 WOOL AND GAUZE, METALLIC
PPP-B-676 Revision E:1992 BOXES SET-UP
JJJ-P-630 Revision C:1979 POTATOES, WHITE, DEHYDRATED
O-S-598 Revision B:1975 SODIUM HYDROXIDE, TECHNICAL
GG-S-773 Revision D:1978 STRAIGHTEDGES: PLASTIC AND WOOD
L-H-00575 Base Document:1966 HOLDER, DESK MEMORANDUM PAPER, SHEET TYPE
UU T 54 : E TAB, INDEX, GUMMED
DD-F-786 Revision C:1960 FUNNEL, FILTERING, LABORATORY, PORCELAIN, BUCHNER TYPE
ZZ-R-768 Revision B:2009 RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES)
JJJ-B-81 Revision E:1976 BALL, ABSORBENT, COTTON OR RAYON, NON STERILE
TT-I-563 Revision F:1975 INK, WRITING, FOR FOUNTAIN AND DIP PENS
H B 00555 : B BRUSH, SCRUB, VEGETABLE
GGG-B-440 Revision B:1964 Blade, Circular Saw, Woodcutting
PPP-C-1266 Revision B:1969 CONTAINER, THERMAL, SHIPPING FOR MEDICAL MATERIAL REQUIRING CONTROLLED TEMPERATURE RANGES
UU-P-270 Revision F:1970 PAPER, WRAPPING, WAXED (DRY)
GG-H-1212 Revision A:1975 HAMMER, REFLEX TESTING, TAYLOR
WW-C-621 Revision G:1990 COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED)
RR-G-700 Revision B:1963 GRIP, WIRE, STRAND, WIRE ROPE AND CABLE
GGG-J-65 Revision A:1965 JOINTER, BRICK
MIL-C-10113 Revision C:1974 COVER, OUTLET VALVE (FOR C15 OUTLET VALVE)
W-T-631 Revision C:1961 TRANSFORMER, POWER DISTRIBUTION
GG-F-620 Base Document:1960 FORCEPS, TOWEL
GGG-P-441 Revision A:1965 PLATES, ANGLE, ADJUSTABLE AND SOLID
KK-L-201 Revision F:1963 LEATHER, CATTLEHIDE, LACE, AND CUT LACES
KK-P-001170 Revision A:1968 PORTFOLIO, ENVELOPE, LEATHER, ARTIFICIAL LEATHER, SLIDE FASTENER
GGG-S-190 Revision A:1965 SEAMER, SHEET METAL, HAND
TT-C-499 Revision A:1975 COATING COMPOUND, CHEMICAL RESISTANT, CLEAR
ZZ-C-730 Revision A:1973 CUPS AND GLIDES, FURNITURE
GG-S-325 Base Document:1961 SHIELD, EYE, SURGICAL, FOX
LLL-S-720 Revision A:1974 STIRRING STICK, BEVERAGE (WOOD)
U-T-00190 Revision A:1964 TEST PAPER AND COLOR CHART, GLUCOSE IN URINE, 100 TABLETS
L-P-315 Revision C:1972 PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR)
MIL R 39032 : D RESISTOR, PACKAGING OF
ZZ-A-605 Revision B:1966 APRON, LABORATORY
MIL-F-36748 Base Document:1971 FUNNEL, COMMON, LABORATORY POLYETHYLENE, OUTSIDE RIBBED
H-B-00681 Revision D:1968 BRUSHES, TYPEWRITER
HH-P-119 Revision A:1967 PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER
GG-C-00716 Revision C:1990 CRUTCH, ADJUSTABLE, WOOD
GGG-S-630 Revision D:1986 SPREADERS, TIRE, PNEUMATICALLY OPERATED
NNN-B-001291 Base Document:1996 BASKET TEST TUBE
HH-P-41 Revision D:1986 PACKING, ASBESTOS, ROPE AND WICK
NNN-G-690 Base Document:1963 GRADUATE LIQUID LABORATORY PLASTIC
GG-P-118 Revision C:1975 PARALLEL RULER, FOLDING TYPE
GG-B-426 Revision B:1960 BLOCK, BITE
DD-G-451 Revision D:1977 GLASS, FLOAT OR PLATE, SHEET, FIGURED (FLAT, FOR GLAZING, MIRRORS AND OTHER USES)
GGG-C-330 Revision C:1967 CHISEL, TOOL BLANK, CALKING TOOL AND METAL-FORMING TOOL, POWER HAMMER
GGG-C-800 Revision B:1964 CUTTER, WIRE ROPE, HAND OPERATED
AA-B-60 Base Document:1959 BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL
MIL S 0050087 : D SEPARATOR, DUST
HHH-V-1867-4 Base Document:1974 ONIONS, DRY, READY-TO-USE
HH-R-590 Revision B:1976 ROOFING FELT (ASBESTOS, ASPHALT SATURATED)
GGG-C-137 Revision A:1964 CAP, VICE JAW
GGG W 00656 : 0 WRENCH, SOCKET (SET, SPARK PLUG, HAND, INCLUDING HANDLES AND ATTACHMENTS)
GGG-H-20 Revision A:1961 HAMMER, HAND, (BODY AND FENDER, FORGED STEEL HEAD)
QQ-C-576 Revision B:1961 COPPER FLAT PRODUCTS WITH SLIT, SLIT AND EDGE-ROLLED, SHEARED, SAWED OR MACHINED EDGES, (PLATE, BAR, SHEET, AND STRIP)
GG-L-340 Base Document:1960 LIGHT, COLOR PERFECTION TESTING
O-S-634 Revision B:1970 SODIUM NITRATE, TECHNICAL (NITRATE OF SODA)
MIL-V-50081 Revision F:1976 VALVE, INLET, CHEMICAL BIOLOGICAL MASK, C2041
GGG-R-00395 Base Document:1966 RIVETER, BLIND, HAND AND HEADS
MIL-C-10857 Revision D:1974 CLOTH, ANTIFOGGING
MIL-Z-63472 Base Document:1980 ZINC ALUMINUM SUPERPLASTIC ALLOYS FOR THERMO FORMING, DEEP DRAWING AND STRETCH FORMING
O-S-605 Revision D:1967 SODIUM SILICATE SOLUTION
HH-I-1972-6 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM
FF-H-1820 Base Document:1974 HARDWARE, BUILDERS, EXIT DEVICES
GGG-W-680 Revision A:1964 WRENCHES, TAP AND REAMER, ADJUSTABLE
X-K-001274 Revision A:1969 KIT, CLASSIFIED DOCUMENT DESTRUCTOR, DRUM TYPE
A-A-2757 Base Document:1991 PENCIL, CARPENTER
L-P-397 Revision C:1977 PLASTIC MOLDING MATERIAL CELLULOSE ACETATE
FF-C-436 Revision F:1988 CLIP, PAPER, WIRE
MIL-V-0050065 Revision C:1977
GG-S-805 Revision B:1977 SURVEYOR, DENTAL CLASP
GGG-V-412 Revision B:1994 VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE
MMM-A-137 Revision D:1976 ADHESIVE RESILIENT FLOORING (WATER SOLUBLE)
ASTM C 725 : 1990 : R2008 Standard Specification for Semidense Mineral Fiber Siding
FF-P-110 Revision J:1997 Padlock, Changeable Combination (Resistant to Opening by Manipulation and Surreptitious Attack)
GGG-N-350 Revision A:1959 NIPPERS AND PINCERS
QQ-W-423 Revision B:1969 FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING
GG-B-814 Revision B:1959 BURNER, ALCOHOL, PRESSURE-TYPE
L-P-390 Revision C:1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY)
ASTM A 159 : 1983 : R2015 Standard Specification for Automotive Gray Iron Castings
ASTM A 823 : 1999 : R2003 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
UU-C-1846 Base Document:1975 COAT, LABORATORY, DISPOSABLE
GGG-M-125-6 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PAINT SPRAY AND ORGANIC VAPORS)
FED-STD-802 Base Document:1991 PACKAGING OF SYNTHETIC FIBER FABRICS
O-C-650 Revision B:1975 CORRECTION FLUID, WHITE OPAQUE; AND THINNER
WW-P-401 Revision F:1989 PIPE AND PIPE FITTINGS, CAST IRON, SOIL
A-A-976 Revision A:1980 PENCIL, LEAD DRAWING
O-F-506 Revision C:1987 FLUX, SOLDERING; PASTE AND LIQUID
O-O-690 Revision C:1992 OXALIC ACID, DIHYDRATE, TECHNICAL
AA-B-001596 Revision A Interim Revision:1974 BOOKCASE, WOOD, GENERAL OFFICE
GGG-C-771 Revision D:1964 CUTTERS, PIPE; AND CUTTERS, TUBE
AASHTO M 281 : 1996 SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT
W-B-101 Revision J:1982 BATTERY, DRY
GGG-M-125-9 Revision A:1982 RESPIRATOR ASSEMBLIES, AIR LINE, HOOD AND HELMET (FOR ABRASIVE BLASTING OPERATIONS)
ASTM F 714 : 2013 : REDLINE Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
SAE AS 4491 : 2012 PLASTIC DISPOSABLE CARTRIDGE, PLUNGER, NOZZLES AND CARTRIDGE ASSEMBLY
BB-S-1419 Base Document:1970 SULFUR HEXAFLUORIDE, TECHNICAL GRADE
ASTM A 805/A805M : 2009 : R2016 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
VV L 765 : A NOTICE 1 LUBRICANT, ENCLOSED-GEAR, NONEXTREME-PRESSURE
ASTM A 220/A220M : 1999 : R2004 Standard Specification for Pearlitic Malleable Iron
NNN-M-560 Base Document:1962 MORTAR AND PESTLE
GGG-A-825 Revision A:1967 AUGER MACHINE, PIPE AND SEWER, POWER OPERATED
H-B-621 Revision F:1958 BRUSH, STENCIL
DD-F-776 Revision C:1960 FUNNEL, FILTERING, LABORATORY, GLASS, BUCHNER TYPE
L-P-1040 Revision B:1977 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)
MIL-B-43064 Revision C:1981 BINDER, LOOSE LEAF (EQUIPMENT LOGBOOK)
L F 00334 : E FILM, PHOTOGRAPHIC, ROLL, MICROFILM (BLACK AND WHITE)
GG-H-00566 Revision B:1970 HOLDER, DESK MEMORANDUM PAPER, ROLL TYPE
DDD-C-95 Base Document:1965 CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC
GGG-T-20 Revision B:1964 TACKER, STAPLE, (COMPRESSION TYPE, MANUALLY OPERATED), AND STAPLE, TACKER
FF-C-82 Revision B:1967 CASTER, SWIVEL, CHAIR
AA-B-605 Revision A:1973 BOX, FILING, STEEL
GG-M-1262 Revision A:1972 MARKER, TUBE TYPE: WHITE
FF-N-105 Revision B:1971 NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT
H-B-531 Revision C:1962 BRUSH, SCRUB, DECK
MIL-M-55565 Revision C:1988 MICROCIRCUITS, PACKAGING OF
L-P-517 Revision C:1967 PLASTIC SHEET, SCRIBE COATED
HH-I-00536 Revision A:1963 INSULATION, ELECTRICAL, MICA, NATURAL MUSCOVITE
GGG-P-00770 Revision A Interim Revision:1967 PULLER, FUSE, (S-SHAPE)
UU-B-00344 Base Document:1970 BINDER, LOOSE-LEAF, MULTIPLE RING TYPE
KK-S-756 Revision D:1971 STROP, MICROTOME KNIFE; AND STROP, RAZOR
TT-I-600 Revision C:1975 INKING PAD, RUBBER STAMP
GG-B-00120 Revision B:1969 BASEPLATE, DENTAL
NNN-B-789 Base Document:1963 BURET STRAIGHT PRECISION (SUPERSEDES IN PART FED SPEC DD-V-581A)
AASHTO M 275M/M 275 : 2008 : R2012 SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE
NNN-F-001643 Base Document:1971 FORCEPS MICROSCOPE COVER GLASS
GGG-G-770 Revision B:1973 GUN, AIR BLOW, (BLAST CLEANING)
L-S-281 Revision C:1963 SHIELD, ERASING, TYPIST
L-C-566 Revision C:1957 COMB, HAIR (PLASTIC)
GGG-B-471 Revision B:1964 BLADE, COPING SAW; AND BLADE, JEWELLERS' SAW
NNN C 1494 : A NOTICE 1 CUP BLOOD SAMPLE
LLL C 00110 : A CASE, FILING, TRANSFER, WOOD OR FIBER
MIL-D-0010132 Revision K:1981 DISC, VALVE
TT I 00521 : A INK, COPYING AND RECORD
GG-S-770 Revision B:1976 STRIP, ABRASIVE, DENTAL
GG C 871 : C CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION)
L-B-1283 Revision A:1977 BAG, SOILED CLOTHES (WATER SOLUBLE PLASTIC)
WW-T-791 Revision A:1971 TUBE, BRASS, SEAMLESS
FF-H-1819 Base Document:1974 HARDWARE, BUILDERS, AUXILIARY LOCKS
FF-N-180 Revision A:1966 NEEDLE, EXCEPT SURGICAL, HAND
GGG-F-325 Revision B:1966 FILE, HAND (AMERICAN PATTERN) AND RASP, HAND
CCC-C-444 Revision D:1973 CLOTH, JEAN, COTTON
L-P-1035 Revision A:1974 PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE VINYL ACETATE COPOLYMER, RIGID
UU-B-36 Revision J:1970 BAGS, PAPER (GROCERS)
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
TT-V-109 Revision C:1978 VARNISH, INTERIOR, ALKYD RESIN
ASTM D 2282 : 1999 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
AASHTO M 31M/M 31 : 2015 STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT
TT I 00547 : B INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES
LLL-C-001491 Base Document:1969 CASE, FILING, TRANSFER, KNOCKDOWN
GGG-E-926 Revision B:1963 EXTRACTOR; COTTER-PIN
BB-O-925 Revision A:1961 OXYGEN, TECHNICAL, GAS AND LIQUID
PPP-S-1927 Revision A:1976 SACK, SHIPPING, PAPER (REINFORCED)
PPP-B-650 Revision B:1975 BOXES, CORRUGATED FIBERBOARD, SPECIAL PURPOSE (RECORDS RETIRING)
JJJ B 0087 : NOTICE 1 BALL, GAUZE
HH-B-100 Revision B:1973 BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION)
QQ-B-655 Revision C:1987 BRAZING ALLOYS, ALUMINUM AND MAGNESIUM, FILLER METAL
MIL-M-51392 Revision A:1979 METER, FLOW RATE INDICATING, FLOAT TYPE
GGG-S-62 Revision D:1986 SAW, CHAIN, PORTABLE, POWER
GGG-W-642 Revision B:1963 WRENCH, BUNG, (NONSPARKING AND NONMAGNETIC)
GGG S 0065 : B (1) SAW, HAND
GGG-B-101 Revision D:1963 BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TRAMPING, DIGGING AND TRAMPING, AND CROWBAR
PPP B 1714 : NOTICE 1 BAGS, SHIPPING, WOVEN POLYPROPYLENE
L-P-50 Revision B:1966 PAD, SCOURING
GGG-D-647 Revision A:1965 DRILL BLANKS AND DRILL BLANK SETS
O-T-634 Revision C:1984 TRICHLOROETHYLENE, TECHNICAL
FF-C-77 Revision C:1986 CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY)
ASTM F 1183 : 1996 : R2011 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
AA-F-00300 Base Document:1965 FILE, ROLL DRAWING
SS-C-153 Revision C:1974 CEMENT, BITUMINOUS, PLASTIC
ASTM C 1448/C1448M : 2005 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Conduit
AA-S-704 Revision A:1971 STOOL, STEP, CASTER MOUNTED, SAFETY
GGG-S-595 Revision B:1972 SOLDERING IRON: NON-ELECTRIC (COPPERS)
SAE AMS QQ A 250 B : 2012 ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR
AASHTO MP 30M/MP 30 : 2017 SPECIFICATION FOR STEEL WIRE AND WELDED WIRE, PLAIN AND DEFORMED, FOR CONCRETE REINFORCEMENT
AASHTO M 279 : 2014 SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC
ASTM B 163 :2011 Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes
SAE AMS QQ A 225 : 2018 ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR
ASTM F 2762 : 2011 Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2807 : 2013 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM D 2235 : 2004 : R2011 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM F 2968/F2968M : 2014 Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
ASTM A 686 : 1992 : R1999 Standard Specification for Tool Steel, Carbon
ASTM A 702 : 2013-11 SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT
ASTM F 438 : 2017 : REDLINE Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ASTM F 1533 : 2001 Standard Specification for Deformed Polyethylene (PE) Liner
ASTM C 1448/C1448M : 2005 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Conduit
ASTM E 784 : 1989 : R2005 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM C 1447/C1447M : 2004 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM E 785 : 1981 : R2017 Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM A 818 : 2006 Standard Specification for Coppered Carbon Steel Wire
ASTM D 6573/D6573M : 2013 : REDLINE Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM D 2513 : 2017-01 SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS
ASTM F 1483 : 2017 : REDLINE Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
ASTM C 296 : 2000 Standard Specification for Asbestos-Cement Pressure Pipe
ASTM C 221 : 1998 : R2008 Standard Specification for Corrugated Asbestos-Cement Sheets
ASTM E 784 : 1989 : R1996 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM F 2987 : 2012 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications
ASTM C 508 : 2000 : EDT 1 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM B 211M : 2012 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
ASTM F 1282 : 2017 : REDLINE Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM C 746 : 1990 : R1998 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
ASTM B 102 : 2000 Standard Specification for Lead- and Tin-Alloy Die Castings
ASTM C 222 : 1997 : R2003 Standard Specification for Asbestos-Cement Roofing Shingles
ASTM B 313M : 1988 Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990)
ASTM F 1901 : 2016 : REDLINE Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM C 659 : 1990 : R1998 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
ASTM B 774 : 2000 : R2005 : EDT 1 Standard Specification for Low Melting Point Alloys
ASTM E 784 : 1989 : R2011 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM A 823 : 1999 : R2012 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
ASTM C 875 : 1998 : R2003 Standard Specification for Asbestos-Cement Conduit
ASTM B 907 : 2016 : REDLINE Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
ASTM F 667/F667M : 2016 : REDLINE Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM F 2905/F2905M : 2013 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM F 1504 : 2014 : REDLINE Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
ASTM A 47/A47M : 1999 : R2018 : EDT 1 Standard Specification for Ferritic Malleable Iron Castings
ASTM F 1345 : 2010 : REV A Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM B 865 : 2004 : R2015 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy<brk/> (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM D 1527 : 1999 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
ASTM A 856/A856M : 2003 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM F 1871 : 2011-06 SPECIFICATION FOR FOLDED/FORMED POLY (VINYL CHLORIDE) PIPE TYPE A FOR EXISTING SEWER AND CONDUIT REHABILITATION
AASHTO M 105 : 2009(R2018) SPECIFICATION FOR GRAY IRON CASTINGS
ASTM A 159 : 1983 : R1993 Standard Specification for Automotive Gray Iron Castings
O M 00232 : H METHANOL (METHYL ALCOHOL)
L-P-377 Revision C:1994 PLASTIC SHEET AND STRIP, POLYESTER
KK-W-231 Revision D:1986 WELTING, LEATHER, SHOE
MIL-V-51281 Revision C:1983 VOICEMITTER OUTLET VALVE ASSEMBLY, CHEMICAL BIOLOGICAL MASK, C29R5
A-A-580 Revision A:1992 LEAD HOLDER
ASTM A 752M : 2004 : R2010 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011)
VV-D-1078 Revision B:1983 DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE)
MIL C 64003 : A CHARGE ASSEMBLY, EXPULSION FOR PROJECTILE, 15MM, SMOKE, M825
ASTM C 668 : 1998 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Transmission Pipe
ASTM B 774 : 2000 : R2010 Standard Specification for Low Melting Point Alloys
AA-B-606 Revision D:1993 BOX, FILING, WOOD
GGG-C-475 Revision B:1973 CLIPPERS, HAIR, HAND
UU-B-335 Revision A:1957 BINDER, LOOSE LEAF, (WITH OR WITHOUT FLEXIBLE PRONG)
O-C-289 Revision G:1985 CHLORINATION KIT, WATER PURIFICATION, (FOR TREATMENT OF DRINKING WATER)
UU B 25 : C NOTICE 1 BAG, PAPER (INSULATED)
GGG G 00690 : A GROOVERS, EDGERS, AND CORNER TOOLS - CONCRETE, HAND
LLL-B-650 Revision A:1965 BOX, FILING, CLOTH COVERED WOOD OR FIBER
NN-H-0085 Base Document:1964 HANDLE, FILE (ADJUSTABLE TYPE)
ASTM B 199 : 2017 : REDLINE Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM A 511 : 2004 Standard Specification for Seamless Stainless Steel Mechanical Tubing
GGG-B-490 Revision F:1992 BLOCKS, TACKLE (MANILA AND NYLON ROPE)
PPP-P-600 Revision G:1992 PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF
MIL-B-38721 Revision B:1980 BOXES, CONSOLIDATION, FIBERBOARD AND POLYOLEFIN
P-S-411 Revision A:1955 SKIN PROTECTIVE COMPOUNDS
O-C-105 Revision D:1974 CALCIUM CHLORIDE, DIHYDRATE AND CALCIUM CHLORIDE, ANHYDROUS, TECHNICAL
U-P-560 Revision A:1976 BACITRACIN ZINC, NEOMYCIN SULFATE AND POLYMYXIN B SULFATE OPHTHALMIC OINTMENT
L-T-940 Revision B:1973 TYPE CLEANER, PLASTIC RUBBER TYPE
AA-D-001923 Base Document:1975 DESK ATTACHMENTS, L, RETURN PLATFORM, CONTEMPORARY STYLE
GGG-S-58 Revision F:1993 Saw, Radial Overarm, Woodworking (No S/S Document)
GG T 00750 : A TUBE, DUODENAL, SURGICAL, REHFUSS
NNN F 289 : D NOTICE 1 FLASK VOLUMETRIC
H B 00531 : D NOTICE 1 BRUSH, SCRUB, DECK
H B 00621 : G BRUSH, STENCIL
PPP-C-1337 Revision B:1976 CONTAINERS, COMPOSITE (STEEL DRUM WITH POLYETHYLENE INSERT)
GG-P-455 Revision B:1967 PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM)
GG C 001321 : B CASTING MACHINE, DENTAL METALS, AND REPLACEMENT PARTS
GGG-H-570 Revision A:1965 HOLDER AND GUIDE, DRIVE PIN
GG-L-260 Revision E:1988 LEVEL, SURVEYING; ABNEY TYPE
GG-F-617 Base Document:1961
GGG-D-691 Revision B:1962 DRILL, MASONRY, HAND AND HOLDER, MASONRY DRILL, HAND
MIL C 55330 : B CONNECTORS, PREPARATION FOR DELIVERY OF
WW-P-471 Revision C:1981 PIPE FITTINGS: BUSHINGS, LOCKNUTS, AND PLUGS; IRON, STEEL, AND ALUMINUM; (THREADED); 125 - 150 POUNDS
GG P 001278 : A PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL
ASTM A 682/A682M : 2005 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009)
NNN T 780 : B NOTICE 1 TUBE CENTRIFUGE GLASS
DDD-B-421 Revision F:1967 BLANKET, BED (OTHER THAN ALL WOOL)
H-B-00481 Revision D:1970 BRUSHES, SANITARY
L-H-520 Revision G:1983 HOSE AND HOSE ASSEMBLIES, NON-METALLIC (RUBBER, PLASTIC)
GGG-S-00625 Base Document:1964 SPOON, BODY AND FENDER
ZZ R 710 : A RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS
L-P-392 Revision A:1964 PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION
RR-S-615 Revision C:1969 SPONGES, METAL
GG I 492 : A INDICATOR, SIGHT LIQUID
AA-S-81 Revision B:1962 SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION
GG-P-00636 Revision B:1973 PRESS, DENTURE FLASK
NNN-P-1482 Revision A:1970 PIPET SEROLOGICAL SAHLI HAEMOGLOBIN
DDD-M-001349 Base Document:1967 MAT, FLOOR AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE
GGG-G-00695 Revision A:1965 GROOVER, SHEET METAL, HAND
GGG-S-131 Revision E:1965 SCRIBER, MACHINISTS
UU-P-272 Revision C:1972 PAPER, WRAPPING, FREEZER (POLYETHYLENE COATED)
GGG-R-200 Revision B:0196 REMOVAL TOOL, OIL FILTER
MIL-A-13550 Revision E:1974 ANTI FOGGING KIT, M1
GGG-C-414 Revision A:1965 CLAMP, WIRE SPLICING
GG-S-605 Base Document:1960 SPECULUM SET, EAR
KK-P-91 Revision B:1963 PALM, SEWING, (SAILMARKERS' AND SADLERS')
QQ-A-367 Revision H:1973 ALUMINUM ALLOY FORGINGS
RR-S-001301 Base Document:1967 SAFETY EQUIPMENT, CLIMBING
PPP-B-140 Revision C:1993 BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF
O-P-566 Revision B:1984 POTASSIUM HYDROXIDE, TECHNICAL
PPP-F-00320 Revision E:1991 FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE) AND CUT SHAPES
PPP-G-460 Revision C:1976 GLASS CONTAINERS, FILLED AND CLOSED, PACKAGING, AND PACKING OF
SS S 535 : B SODIUM BORATE, DECAHYDRATE, TECHNICAL (BORAX)
JJ-B-00178 Revision C:1957 BELTS, ROUND, DENTAL ENGINE
GG-D-00441 Revision C:1969 DISPENSER, STRIP, DENTAL
TT-I-528 Revision C:1971 INK, DRAWING, WATERPROOF, BLACK
UU-S-48 Revision F:1973 SACK, SHIPPING, PAPER
DDD-C-441 Revision C:1972 CLOTH, POLISHING
KKK-S-2777 Base Document:1985 SNOWPLOWS, TRUCK MOUNTED, DISPLACEMENT TYPE, 36,000 GVWR, 4 BY 4
O-A-549 Revision A:1973 ANTI FOGGING COMPOUND
ASTM E 454 : 2012 : R2016 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
AA-S-696 Base Document:1976 STOOL, REVOLVING, SURGEON'S
GGG-T-70 Revision C Interim Revision:1968 TAP, THREAD CUTTING (HIGH SPEED STEEL, GROUND THREAD HAND AND SPARK PLUG)
A-A-2763 Base Document:1992 TYPING, ELEMENT (DISK TYPE)
MIL-D-218 Revision B:1981 DIBUTYL PHTHALATE, TECHNICAL (METRIC)
QQ-S-766 Revision D:1988 STEEL PLATES, SHEETS AND STRIP CORROSION RESISTING
MMM-A-1754 Base Document:1973 ADHESIVE AND SEALING COMPOUND EPOXY METAL FILLED
C-F-202 Revision F:1985 FELT SHEER (HAIR) AND FELT ROLL (HAIR)
P-S-1792 Base Document:1973 SOAP, LAUNDRY (NEUTRAL AND BUILT)
PPP-P-1135 Revision B:1984 PACKAGING OF DUCK FABRICS (COTTON; SYNTHETIC FIBER; COTTON SYNTHETIC FIBER BLENDS)
L-W-001653 Base Document:1971 WASTE RECEPTACLE, MOBILE, PLASTIC
AA-D-001918 Base Document:1975 DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE
XX-C-2812 Base Document:1993 COMPRESSOR, AIR, DIESEL-ENGINE-DRIVEN, PORTABLE, WHEEL-MOUNTED
W-A-450 Revision C:1990 COMPONENTS FOR INTERIOR ALARM SYSTEMS
O-S-571 Revision G:1991 SODIUM CARBONATE, ANHYDROUS, TECHNICAL
ASTM D 1527 : 1999 : EDT 1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
GG-S-621 Revision C:1977 SPLINT, WOOD
GGG-T-00570 Revision A:1965 TORCH KIT, SOLDERING (PROPANE GAS)
GGG-T-330 Revision B:1967 THREADING SET, SCREW
DDD-C-301 Revision A:1976 CHEESECLOTH, (FOR) WIPING PURPOSES (REMNANTS AND SECONDS)
TT-P-1536 Revision A:1975 PLUMBING FIXTURE SETTING COMPOUND
DDD-P-0053 Revision C:1963 PAD, ABDOMINAL (DRAINAGE DRESSING, COMBINATION)
L-P-506 Revision A:1963 PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED
O-S-809 Revision E:1990 SULFURIC ACID, TECHNICAL
A-A-2767 Base Document:1992 INK, DRAWING, WATERPROOF, BLACK
GGG-B-485 Revision B:1978 BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE)
L-P-380 Revision C:1973 PLASTIC MOLDING MATERIAL METHACRYLATE
C-F-158 Revision C:1969 FEATHER, LAND FOWL, (WHOLE) AND (CRUSHED)
L-P-528 Revision B:1976 PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED, PAPER-BACKED
ASTM A 390 : 2006 : R2011 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
ASTM F 2648/F2648M : 2017 : REDLINE Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
ASTM A 47/A47M : 1999 Standard Specification for Ferritic Malleable Iron Castings
U-E-650 Revision A:1976 ERGOTAMINE TARTRATE AND CAFFEINE TABLETS, N.F.
PPP-B-2920 Base Document:1997 BOILERS AND RELATED EQUIPMENT, PACKAGING OF
UU-P-663 Revision B:1972 PAPERBOARD, DRAWING
ASTM F 289 : 1996 : R2009 Standard Specification for Molybdenum Wire and Rod for Electronic Applications
GGG-H-86 Revision C:1963 HAMMER, HAND, (FORGED STEEL HEAD)
NNN F 800 : A NOTICE 1 FUNNEL SEPARATORY
GGG-B-50 Revision A:1966 BAG, LINEMAN'S TOOL, ROUND
TT-I-1795 Revision A:1973 INK, MARKING, STENCIL, OPAQUE (POROUS AND NON-POROUS SURFACES)
P-T-1544 Revision A:1975 TEST KIT (DETERGENT CONCENTRATION AND WATER HARDNESS)
L E 00530 : B ENVELOPE, TRANSPARENT
DD B 00510 : A BOTTLE, ASPIRATOR, GLASS
GG-C-106 Revision A:1961 CALIPER, EYE, CASTROVIEJO
NNN-F-001652 Base Document:1970 FUNNEL COMMON LABORATORY POLYPROPYLENE RIBBED
TT S 001543 : A SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES)
UU B 00342 : C BINDER, LOOSE LEAF, RING, ENGINEER S FIELD BOOK
DDD-L-20 Revision F:1990 LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE)
O-I-00490 Revision B:1974 INHIBITOR, CORROSION, LIQUID COOLING SYSTEM
GG-H-590 Base Document:1959 HOLDER, RADIOGRAPHIC FILM CASSETTE
KK-C-450 Revision F:1986 CLOTHING, LEATHER, (APRONS, SLEEVES, AND JACKETS)
MMM-A-105 Base Document:1967 ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE
GGG-B-001351 Base Document:1968 BROACH, JEWELLER'S AND PIVOT
O-F-1044 Revision B:1975 FUEL, ENGINE PRIMER: COLD STARTING IN PRESSURIZED AND NONPRESSURIZED CONTAINERS
PPP-B-665 Revision D:1972 BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS
GG-H-109 Revision B:1975 HANGER, X-RAY FILM
NNN-S-450 Revision B:1976 SLIDE MICROSCOPE
DDD-P-66 Revision B:1973 PAD, SANITARY
GG-C-560 Revision D:1986 COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF
GG-D-600 Revision D:1982 DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS
SS J 570 : B NOTICE 1 JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION)
NNN D 001290 : D DESICCATOR LABORATORY AND DESICCATOR PLATES
DDD R 00271 : B NOTICE 1 RIBBON, COMPUTING AND RECORDING MACHINES
TT-I-535 Revision D:1972 INK, DUPLICATING MACHINE STENCIL, PASTE, BLACK
PPP-P-420 Revision B:1972 PLUG AND FLANGE (FOR DRUM CLOSURE)
GG-E-916 Revision F:1987 EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL
UU-C-00620 Revision C:1967 COVER, HEADREST, PAPER (DENTAL CHAIR)
MMM-A-189 Revision C:1985 ADHESIVE SYNTHETIC RUBBER THERMOPLASTIC GENERAL PURPOSE
GG-T-250 Revision A:1974 TESTER, ANTIFREEZE SOLUTIONS
AA-S-00300 Revision A Interim Revision:1967 SHELF, FILING
PPP-P-1899 Base Document:1974 PREPARATION FOR DELIVERY REQUIREMENTS FOR TABLES, STEEL, GENERAL OFFICE
HH-P-31 Revision F:1987 PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE
UU-S-625 Revision A:1965
AA-O-00240-4 Revision C Interim Revision:1970 CREDENZA, OFFICE, STEEL
GGG-D-780 Revision A:1965 DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE)
P-P-101 Revision E:1973 PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF
TT-I-1788 Base Document:1972 INK, DUPLICATING, LITHOGRAPHIC PROCESS KIT
GG-T-258 Revision A:1967 TESTER, BATTERY ELECTROLYTE SOLUTION
EE-C-1827 Revision A:1984 DINING PACKETS (DIETETIC OR NONDIETETIC, TRAY SERVICE)
HH-I-515 Revision E:1992 INSULATION, THERMAL (LOOSE-FILL FOR PNEUMATIC OR POURED APPLICATION): CELLULOSIC OR WOOD FIBER
GG-B-0089 Revision C:1967 BAND, ABRASIVE, (SILICON CARBIDE)
TT-A-516 Revision D:1962 AMYL ALCOHOL, SECONDARY
W-S-865 Revision C:1959 SWITCH BOX, (ENCLOSED), SURFACE-MOUNTED
GGG-E-926 Revision C Interim Revision:1968 EXTRACTOR; COTTER PIN
NNN-T-001529 Revision B:1970 TEST PAPER HYDROGEN ION
P-C-535 Revision B:1978 CLEANING COMPOUND, PLATERS ELECTROCLEANING, FOR STEEL
MIL-H-0010120 Revision K:1983
FF-S-111 Revision D:1974 SCREW, WOOD
GGG-S-775 Revision A:1960 STUD REMOVER AND SETTER
FF-F-133 Revision A:1967 FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE)
MIL-C-51232 Revision C:1977 CLOTH, MARQUISETTE, POLYESTER
GGG F 00360 : D FINGER, MECHANICAL, AND RETRIEVER TOOL, MAGNETIC
MIL-C-51387 Revision A:1979 CIRCUIT CARD ASSEMBLY
NNN-B-001194 Base Document:1966 BOTTLE DROPPER AND DROPPING TK
PPP-P-1877 Revision A:1977 PACKAGING AND PACKING OF WOOD OFFICE FURNITURE
ASTM F 810 : 2012 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
O-N-335 Base Document:1962 NICKEL SALT, ELECTROPLATING
GGG H 580 : A HOOK, MATERIAL HANDLING, HAND
AASHTO M 32M/M 32 : 2009 SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
ZZ-G-100 Revision A:1961 GLOVES, RUBBER, AUTOPSY
GGG-H-00110 Base Document:0196 HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE)
QQ-T-425 Revision B:1976 TINPLATE, ELECTROLYTIC
CCC C 531 : E CLOTH, TRACING
GG-P-133 Revision B:1966 PEN, RULING, DRAFTSMAN, RAILROAD, SWIVEL BLADE, 5-INCH
O-E-661 Revision D:1984 ERADICATOR, INK
NNN-F-240 Revision D:1976 FLASK LABORATORY
DD-J-112 Revision B:1976 JAR, BIOLOGICAL STAINING, COPLIN
W-C-440 Revision B:1970 CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR
UU B 342 : A BINDER, LOOSE LEAF, RING, ENGINEER S FIELD BOOK
DDD E 00940 : A EYELET REINFORCEMENT, GUMMED, CLOTH
MMM-A-182 Revision A:1967 Adhesive, Rubber
GG-B-101 Revision G:1986 BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED)
PPP-P-2008 Base Document:1976 PREPARATION FOR DELIVERY REQUIREMENTS FOR PARTITIONS, OFFICE, STEEL
LLL-F-00550 Base Document:1964 FORK AND SPOON, PICNIC (WOOD)
TT-S-00227 Revision E:1969 SEALING COMPOUND, ELASTOMERIC TYPE, MULTICOMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES)
ASTM F 876 : 2017 : REDLINE SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
UU B 39 : E BAG, PAPER, MERCHANDISE
GG H 925 : 0 HYDROMETERS, GRADUATED SCALE (FOR GENERAL LABORATORY USE)
UU B 43 : D NOTICE 1 BAG, PAPER, WASTE-RECEPTACLE
GG-C-1433 Revision B:1976 CHISELS (CUTTING INSTRUMENTS), DENTAL
DDD-B-61 Revision E:1972 BANDAGE, GAUZE, (ROLLER AND COMPRESSED)
L-C-110 Revision J:1958 CELLOPHANE (COATED AND NONCOATED REGENERATED CELLULOSE FILM)
DDD R 311 : F (1) RIBBONS, TYPEWRITER
MIL-F-0051095 Revision F:1983 FILTER MATERIAL, GAS-AEROSOL, C18R1 2
UU-T-81 Revision J:1975 TAG, SHIPPING AND STOCK
FF-T-311 Revision E:1974
SS-C-266 Revision F:1973 CHALK, MARKING, WHITE AND COLORED
GG-C-611 Revision C:1975 COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING, BACTERIOLOGICAL
DDD-C-001559 Base Document:1969 CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING
GGG-O-591 Revision F:1977 OILER, HAND
NNN C 440 : NOTICE 1 CLAMP UTILITY LABORATORY AND HOLDER BURET CLAMP
HH-I-538 Revision B:1964 INSULATION, ELECTRICAL, PASTED-MICA
DD S 750 : A STOPPER, LABORATORY APPARATUS, TAPER-GROUND
GGG-A-145 Revision A:1965 ADJUSTING TOOL, BRAKE SHOE (SPOON TYPE)
MIL-S-51547 Base Document:1989 SMOKE POT, HC, M1, COMPONENTS FOR
AA-P-560 Revision A:1966 POINTER, LECTURE
GG P 00146 : D PEN SET, DESK
GG-B-001294 Base Document:1967 BURNISHER, RENTAL
GGG-T-661 Revision B:1966 TRAMMELS AND TRAMMEL POINTS
MIL-F-51184 Revision A:1973 FASTENER, SNAP
GGG-B-001222 Base Document:1967 BIT, SCREWDRIVER (AND ADAPTER, SCREWDRIVER BIT)
GG-S-1343 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
UU-P-221 Revision B:1972 PAPER, DIRECT POSITIVE SENSITIZED (DIAZOTYPE)
QQ-C-571 Revision B:1974 COPPER, PHOSPHOR (ALLOYING ADDITIVE)
GGG-T-0040 Revision A Interim Revision:1965 TAMPERS, HAND
GGG-W-653 Revision B:1964 WRENCH, RATCHET, REVERSIBLE
QQ-B-750 Base Document:1961 BRONZE, PHOSPHOR, BAR, PLATE, ROD, SHEET, STRIP, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS
O-I-501 Revision B:1964 INHIBITORS, PICKLING (FOR USE WITH SULPHURIC ACID)
GGG-C-135 Revision A:1966 CAULKING TOOL, HAND
GGG-B-001013 Base Document:1967 BIT, SCREWDRIVER (TORQ-SET)
GG-T-675 Base Document:1958 TRIMMER, ANIMAL TOENAIL
PPP-B-621 Revision D:1981 BOXES, WOOD, NAILED AND LOCK CORNER
LLL-C-251 Revision A:1969 CHARCOAL, WOOD
GGG-J-51 Revision E:1967 JACKS, MECHANICAL, HAND OPERATED (SCREW; SCISSORS; REEL; PLANER; AND RACK BAR)
O-S-00650 Base Document:1965 SODIUM SULFITE, ANHYDROUS, TECHNICAL, AND SODIUM BISULFITE, ANHYDROUS, TECHNICAL, FOR WATER TREATMENT
GG-G-590 Base Document:1961 GONIOMETER, ORTHOPEDIC
EE-S-321 Revision F:1987 SHORTENING COMPOUNDS AND LARD
GGG-D-698 Revision A:1963 DRILL, RATCHET (REVERSIBLE)
JJ-H-571 Revision B:1967 HOSE, FIRE, LINEN, UNLINED (WITH OR WITHOUT COUPLINGS)
O S 00809 : D SULFURIC ACID, TECHNICAL
RR-C-271 Revision G:2016 CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL
VV-S-190 Base Document:1961 SEALING COMPOUND (DIPCOAT)
PPP-C-1752 Revision D:1989 CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM
QQ-P-00428 Revision C:1967 PLATINUM FOIL (DENTAL)
O-E-760 Revision D:1987 ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS
UU-C-1387 Revision B:1976 CAP, FOOD HANDLERS, PAPER, WHITE, ADJUSTABLE
O-A-491 Revision E:1967 AMMONIUM CHLORIDE, TECHNICAL
QQ-Z-363 Revision B:1972 ZINC BASE ALLOY, DIE CASTINGS
MIL I 2819 : E INSULATION BLOCK THERMAL
GGG-D-694 Revision A:1960 DRILL, MASONRY, ROTARY DRIVEN
JJJ-B-87 Base Document:1959 BALL, GAUZE
MIL-P-51432 Revision A:1988 PLASTIC SHEET, POLYETHYLENE COPOLYMER
P-C-436 Revision E:1986 CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM
HHH-C-575 Revision E:1987 COFFEE, INSTANT
DD-T-710 Base Document:1957 TUBE, CONNECTING, LABORATORY GLASSWARE AND CONNECTOR, ELASTIC TUBING, BRANCHED
TT S 00230 : C SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES)
GGG-P-00788 Base Document:1964 PULLER, MECHANICAL, WATCH AND CLOCK HAND
GGG-V-440 Revision A:1967 VISE, HANDSAW, FILING; BAND SAW FILING; AND CIRCULAR SAW FILING
GGG A 00147 : 0 ADJUSTING TOOL, VALVE TAPPET
GGG-B-00101 Revision E:1995 BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TRAMPING, DIGGING AND TRAMPING, AND CROWBARS
HH-G-76 Revision C:1970 GASKET, ASBESTOS METALLIC CLOTH
CCC-P-91 Revision C:1973 PADDING; RUBBERIZED, CURLED HAIR
GG-R-60 Revision C:1965 RAZORS, SAFETY; AND BLADES, RAZOR
AA-B-450 Revision B:1974 BLACKBOARD, PORTABLE
GG-P-00181 Revision D:1993 PENHOLDERS, WRITING
GG-D-1958 Base Document:1975 DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED)
KK-C-300 Revision C:1969 CHAMOIS LEATHER, SHEEPSKIN, OIL TANNED
O-H-765 Revision E:1990 HYDROCHLORIC ACID, TECHNICAL
AA-S-271 Revision D:1967 SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE
FF-T-1813 Base Document:1973 TACK
GG-S-176 Revision A:1960 SCREEN, X-RAY INTENSIFYING, ROENTGENOGRAPHIC, FOR DIAGNOSTIC RADIOGRAPHY
L-P-1221 Revision A:1971 PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN)
DDD-E-940 Base Document:1963 EYELET REINFORCEMENT, GUMMED, CLOTH
GGG-R-0080 Base Document:1965 RAKE (ASPHALT, ROAD)
TT B 848 : B BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS)
MIL S 28786 : B SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
KK-G-486 Revision E:1984 GLOVES, WELDER'S, LEATHER GAUNTLET
QQ-C-465 Revision A:1974 COPPER ALUMINUM ALLOYS (ALUMINUM BRONZE) (COPPER ALLOY NUMBERS 606, 614, 630, AND 642), ROD, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR), SHAPES AND FORGINGS
AA-S-130 Revision B:1991 SCREENS, BEDSIDE, ALUMINUM
HH-M-391 Revision E:1976 MITTENS, CLOTH, ASBESTOS (LEATHER REINFORCED)
P-C-451 Revision E:1975 COATED ABRASIVE, CLOTH, ALUMINUM OXIDE OR SILICON CARBIDE
GG-R-1472 Revision B:1987 RETAINER, MATRIX, DENTAL (TOFFLEMIRE)
TT-I-526 Revision A:1964 INK, DRAWING, BLACK AND COLORS (FOR GLAZED PLASTIC SURFACES)
GGG-F-331 Revision B:1966 FILE, HAND (SWISS PATTERN)
GG-C-0048 Revision A:1967 CABINET, TOOTH ASSORTMENT, COMPARTMENTED
MIL-A-87134 Base Document:1978 ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS
GGG-C-746 Revision G:1979 CUTLERY, GALLEY AND KITCHEN (CLEAVER, FORKS, KNIVES, SPATULAS, STEEL AND SERVER)
QQ-C-40 Base Document:1963 CALKING, LEAD WOOL AND LEAD PIG
UU-B-340 Revision A:1973 BINDER, LOOSE LEAF, FLEXIBLE PRONG
FF-T-51 Revision D:1975
A-A-79 Revision C:1992 DISPENSER, GUMMED TAPE (AUTOMATIC TYPE)
ZZ-R-1415 Revision A:1977 RUBBER BAND
NNN-H-001497 Base Document:1970 HOLDER BLOOD COLLECTING TUBE
GG-B-001275 Base Document:1967 BURS, DENTAL, FINISHING
GGG-S-285 Revision B:1964 SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING)
GGG-S-284 Revision B:1964 SHEARS; PRUNING, HAND, (ONE-HAND OPERATED)
ZZ-P-75 Revision B:1971 PAD, TYPEWRITER, SPONGE RUBBER
GGG-F-00420 Base Document:1963 FISHING TOOL, PNEUMATIC TYPE VALVE
NNN-B-1505 Revision A:1976 BOTTLES SCREWCAP GLASS (LABORATORY USE)
GG-B-60 Revision D:1972 BALL POINT PEN, SINGLE CARTRIDGE
QQ C 586 : C COPPER NICKEL ZINC ALLOY, ROD, SHAPES, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR)
GGG-W-00647 Base Document:1966 WRENCH, BUNG, AND WRENCH, DRAIN PLUG
GG-H-582 Base Document:1959 HOLDER, PATIENT'S BED-TRAY CARD
QQ-M-40 Revision B:1962 MAGNESIUM ALLOY FORGINGS
ASTM A 684/A684M : 2017 : REDLINE Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
WW-T-696 Revision E:1984 TRAPS, STEAM
L-C-780 Revision A:1965 CURTAIN, SHOWER AND WINDOW, PLASTIC
PPP-C-1797 Revision A:1982 CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM
AASHTO M 32M/M 32 : 2009 : R2013 SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
PPP-P-0015 Revision D:1970 PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL
ASTM A 392 : 2011 : REV A : R2017 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
FFF-D-191 Revision D:1975
UU-P-134 Revision E:1974 PAPER, WRAPPING, WET WAXED
GGG-T-00563 Revision B:1967 TOOLS, BLACKSMITH'S (CHISELS, FLATTERS, PULLERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES)
DDD-C-628 Revision F:1981 COVER, MATTRESS
L-T-790 Revision B:1976 TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE)
MIL-A-202 Revision C:1981 ANTHRACENE, TECHNICAL (METRIC)
DD-M-00200 Revision B:1970 MEDICINE GLASS
GG-L-00410 Base Document:1964 LINE GUIDE, LETTERING, ADJUSTABLE
DDD R 00310 : (1) RIBBON, TIME STAMP
ZZ-G-401 Revision B:1970 GLOVES, RUBBER (FOR) ELECTRICAL WORKERS (FOR USE IN CONNECTION WITH APPARATUS OR CIRCUITS NOT EXCEEDING 5,000 VOLTS TO GROUND)
GG-I-550 Revision B:1974 INKING PAD, OFFICE TYPE NUMBERING MACHINE
GG-C-1320 Revision B:1985 CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM)
ASTM C 875 : 1998 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Conduit
H-B-401 Revision C:1964 BRUSHES, MUCILAGE AND PASTE
DD-B-599 Revision A:1961 BOTTLE, STOPPER, VACCINE, ROUND AND STOPPER, BOTTLE, RUBBER
BBB-S-1269 Revision B:1973 SWEAT PANTS
L-T-776 Revision A:1966 TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN)
GG-P-725 Revision B:1978
GG-G-650 Base Document:1959 GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE
K-B-1069 Revision A:1972 BASKET, FRAME MOUNTED
GGG-H-001347 Base Document:1969 HOT LINE STICKS
JJ-G-451 Revision H:1984 GLOVES, MEN'S AND WOMEN'S CLOTH, LEATHER PALM
DDD-B-60 Base Document:1959 BANDAGE, GAUZE, TUBULAR
GG-B-140 Revision D:1986 BATH, WATER, DENTAL IMPRESSION COMPOUND
UU-B-40 Revision C:1973 BAG, PAPER, SHOPPING
KKK-L-370 Revision D:1988 LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC)
LLL-L-51 Revision D:1985 LADDERS, PORTABLE, WOOD: EXTENSION AND STRAIGHT
GG-P-001428 Revision A:1975 PREVENTIVE DENTISTRY KIT, PATIENT
UU P 675 : B INT AMD (7) POCKET PLANNING SET
A-A-59569 Revision C:2009 BRAID, WIRE (COPPER, TIN-COATED, SILVER-COATED, OR NICKEL COATED, TUBULAR OR FLAT)
GG-C-1282 Revision C:1985 CURETTES, ALVEOLAR (MOLT AND MILLER)
NNN B 001522 : 0 BOTTLE, STOPPER (NARROW AND WIDE MOUTH)
O-S-377 Revision B:1966 SODIUM PYROPHOSPHATE, ANHYDROUS, TECHNICAL (TETRASODIUM-PYROPHOSPHATE) (S/S BY DOD-S-51517)
ZZ-T-351 Revision C:1976 TIP, CANE AND CRUTCH, RUBBER
PPP-P-1892 Base Document:1974 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF
GG-S-590 Revision B:1976 SPATULA, DENTAL, CEMENT
ASTM F 1183 : 1996 : R2017 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
GG-C-00590 Revision B:1970 COPYHOLDER, TYPIST'S
L-P-511 Base Document:1964 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
GG-S-321 Revision D:1972 SHIELD, ERASING, DRAFTSMEN S
NNN-B-788 Revision A:0196 BULB DROPPING PIPETTE
DDD-P-50 Base Document:1959 PAD, COTTON, DRESSING, EYE PAD
GGG-S-665 Revision C:1963 STRIPPER, CABLE, HAND, AND STRIPPER, WIRE, HAND
GGG-D-651 Revision D:1964 DRILL, BREAST
GG-H-216 Revision C:1976 HEMACYTOMETER SET
PPP P 001946 : NOTICE 1 PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE
ASTM F 2807 : 2013 : R2018 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications (Withdrawn 2024)
GGG-C-00137 Revision B Interim Revision:1968 CAP, VICE JAW
QQ-W-470 Revision B:1965 WIRE, STEEL, CARBON, SPRING, MUSIC.
GGG-H-506 Revision D:1962 HOE, MATTOCKS, AND PICK
KKK-T-728 Revision A:1973 TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY
O-T-620 Revision C:1967 TRICHLOROETHANE-1,1,1, TECHNICAL, INHIBITED (METHYL CHLOROFORM)
ASTM F 2806 : 2010 : R2015 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
GG-S-1344 Revision A:0197 STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE)
DD-D-431 Revision D:1977 DISH, BIOLOGICAL STAINING, WITH TRAY
GG-E-651 Revision C:1975 ERASER, BLACKBOARD
BB-F-1421 Revision B:1982 FLUOROCARBON REFRIGERANTS
GGG-S-1408 Revision A:1973 SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT AND LEFT HAND TURNING
GG-S-125 Base Document:1961 SAW, PLASTER-CAST, ENGEL
ASTM A 617/A617M : 1996 SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT
GGG-M-125-10 Revision A:1982 RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT
GG-F-001189 Base Document:1971 FOUNTAIN PEN, TECHNICAL
ASTM B 250/B250M : 2016 : REDLINE Standard Specification for General Requirements for Wrought Copper Alloy Wire
UU-P-680 Revision A:1964 PORTFOLIO, DOUBLE-POCKET, PRESENTATION
FF-T-791 Revision B:1967 TURNBUCKLE
GGG-D-777 Revision B:1966 DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL
GGG-M-125-8 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS AND MISTS)
L-P-1183 Revision B:1977 PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID
HH-G-450 Revision D:1972 GLOVES, CLOTH (ASBESTOS)
GGG-L-1763 Base Document:1974 LABELING MACHINES
L-P-389 Revision A:1964 PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION
GGG-P-00477 Revision A:1967 PLIER, SLIP JOINT (LINE CLAMP)
GGG-D-296 Revision B:1968 DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE; AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS)
BB-A-106 Revision D:2010 ACETYLENE, TECHNICAL, DISSOLVED
ASTM A 220/A220M : 1999 : R2009 Standard Specification for Pearlitic Malleable Iron
DDD-G-148 Revision D:1964 GAUZE, ABSORBENT, STERILE AND GAUZE, ABSORBENT, IODOFORM IMPREGNATED (PACKING STRIPS)
UU T 0085 : A NOTICE 1 TAPE, CORRECTION
ASTM C 223 : 1998 : R2003 : EDT 1 Standard Specification for Asbestos-Cement Siding
TT B 838 : A BUTYL ACETATE, NORMAL (FOR USE IN ORGANIC COATINGS)
TT-V-81 Revision G:1978 VARNISH, MIXING, FOR ALUMINUM PAINT
KKK-T-1725 Base Document:1972 TRUCK, HAND, BOX AND TUB TYPE
HHH-C-571 Revision F:1985 COFFEE
ASTM A 230/A230M : 2005 : R2011 : EDT 1 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A 1085 : 2013 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
J-C-96 Revision A:1971 CABLE, TELEPHONE (W-108-B)
HH-T-1782 Base Document:1973 TAPE, ASBESTOS
ASTM A 232/A232M : 2005 : R2011 : EDT 1 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ZZ-H-428 Revision D:1974 HOSE, NON METALLIC AND HOSE, PREFORMED, FOR THE COOLANT SYSTEMS OF AUTOMOTIVE AND OTHER LIQUID COOLED ENGINE
TT W 549 : D NOTICE 1 WOOD PRESERVATIVE, AMMONIACAL COPPER ARSENITE MIXTURE
WW-N-351 Revision C:1976 NIPPLE, PIPE, THREADED
TT W 546 : D NOTICE 1 WOOD PRESERVATIVE, ACID COPPER CHROMATE MIXTURE
DD-P-00100 Revision C:1970 PAPERWEIGHT, GLASS
DDD-S-251 Revision D:1966 SHADE, ROLLER, WINDOW, ROLLER, SLAT, CORD, AND ACCESSORIES
GG-S-001634 Base Document:1970 SCALERS, DENTAL, SINGLE-ENDED
ASTM A 116 : 2011 : R2016 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
GGG-G-31 Revision A:1961 GAGES, MARKING AND MORTISING
AASHTO M 322M/M 322 : 2010 : R2015 SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT
ASTM B 234 : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
AASHTO M 225M/M 225 : 2009 : R2013 SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT
ASTM E 786 : 1981 : R2011 Standard Specification for Dishes, Evaporating, Platinum
ASTM B 163 : 2011 : EDT 1 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM F 289 : 1996 : R2014 Standard Specification for Molybdenum Wire and Rod for Electronic Applications
ASTM A 905 : 2004 Standard Specification for Steel Wire, Pressure Vessel Winding
ASTM A 392 : 2011 : REV A Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
ASTM A 500/A500M : 2018 : REDLINE Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM B 774 : 2000 : R2005 Standard Specification for Low Melting Point Alloys
SAE AMS HH G 101 : 2014 GASKET, METALLIC-ENCASED
ASTM A 834 : 1995 : R2006 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM C 1449/C1449M : 2005 : REV A : R2010 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
ASTM F 2881/F2881M : 2018 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM C 725 : 1990 : R2003 : EDT 1 Standard Specification for Semidense Mineral Fiber Siding
ASTM F 810 : 2012 : R2018 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ASTM B 167 : 2011 : R2016 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
ASTM C 508 : 2000 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM F 668 : 2017 : REDLINE Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
ASTM A 220/A220M : 1999 : R2014 Standard Specification for Pearlitic Malleable Iron
ASTM A 955/A 955M : 2018-02 SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS-STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM A 854/A854M : 2008 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM B 308M : 1988 Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990)
ASTM F 1348/F1348M : 1991 : R2013 Standard Specification for Pneumatic Rotary Descaling Machines
ASTM A 390:2006 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
ASTM F 3128 : 2015 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
ASTM A 764 : 2007 : R2012 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A 74 : 2017 : REDLINE Standard Specification for Cast Iron Soil Pipe and Fittings
ASTM D 2729 : 2017 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM C 296 : 2000 : R2004 : EDT 1 Standard Specification for Asbestos-Cement Pressure Pipe
ASTM A 505 : 2016 : REDLINE Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 853 : 2004 : R2017 Standard Specification for Steel Wire, Carbon, for General Use
ASTM F 771 : 1999 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
ASTM D 3309 : 1996 : REV A : R2002 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)
ASTM F 891 : 2016 : REDLINE Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM D 2235 : 2004 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM A 856/A856M : 2003 : R2009 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A 834 : 1995 : R2011 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM C 1450/C1450M : 2004 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
ASTM B 19 : 2015 : REDLINE Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM F 2435 : 2015 : REDLINE Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM D 98 : 2015 : REDLINE Standard Specification for Calcium Chloride
ASTM D 4514 : 2012 : REDLINE Standard Specification for Friction Tape
ASTM F 1673 : 2010 : R2016 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM A 519 : 2006 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM E 785 : 1981 : R1996 : EDT 1 Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM F 2806 : 2010 : EDT 1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM B 943 : 2016 : REDLINE Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM F 758 : 2014 : REDLINE Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage